An Experimental Study on the Tribological Properties of the Pressing Dies of WC and SKD11 in the High Viscosity Oil
The poor quality of machining surfaces caused by the surface wear of the pressing dies and the corrosion of the pressing parts has been a major concern for manufacturing engineers. In order to decrease the surface wear of the pressing dies and the corrosion of the pressing parts, the drawing oil is always used during the pressing process. It is well known that the properties and the distributions of the drawing oil significantly influence lubrication, cool down, cleanness and stabilization for the pressing dies and parts. Therefore, it is very important for the operating limitation of the pressing process. This paper is base on the above statements to further investigate the effects of the high viscosity drawing oil on the tribological properties and the adhesions between the dies and parts. The results have not only an added advantage of technology of pressing process, but they are also very helpful in design the pair of the dies and parts in the future. Moreover, the purpose of better quality and faster product speed of the pressing process can then be obtained for the industry.