Volume Stability of Polymer-Silicate Based Materials Exposed to High Temperatures

2016 ◽  
Vol 714 ◽  
pp. 78-85
Author(s):  
Tomáš Melichar ◽  
Jiří Bydžovský ◽  
Ámos Dufka

This paper presents research into analysing the volume stability of composite materials based on a polymer-cement matrix. The attention was paid to the influence of extreme temperatures shocks. Materials of modified composition were gradually exposed to extreme temperatures and then cooled in furnaces. Cooling was carried out by two different ways, i.e. slow and rapid. Emphasis was placed on the aggregate type used – fine lightweight and dense. Also available materials from alternative resources which have positive effect on thermal stability of composites based on silicate matrix were considered.

2021 ◽  
Vol 12 (4) ◽  
pp. 710-717
Author(s):  
O. L. Baik ◽  
N. Y. Kyyak ◽  
O. M. Humeniuk ◽  
V. V. Humeniuk

Mosses are pioneer plants in post-technogenic areas. Therefore, the question of adaptive reactions of mosses from these habitats represents a scientific interest. The research is devoted to the study of adaptive changes in the metabolism of the dominant moss species Bryum caespiticium Hedw., collected in the devastated territories of the Novoyavorivsk State Mining and Chemical Enterprise (SMCE) “Sirka (Sulfur)” exposed to hyperthermia and insolation, which cause oxidative stress in plants. The influence of these stressors on the activity and thermal stability of antioxidant enzymes, hydrogen peroxide content, anion radical generation and accumulation of prooxidant components in moss shoots was studied. The activity and thermal stability of peroxidase and superoxide dismutase (SOD) were analysed forB. caespiticium moss from different locations of northern exposure at the sulfur mining dump No 1 in summer and autumn. We established the dependence of the activity of antioxidant enzymes of moss on the intensity of light and temperature on the experimental plots of the dump No 1. In summer, the highest activity and thermal stability rates of peroxidase and SOD were observed. Under the conditions of the experiment in shoots of В. caespiticium from the northern peak of the dump under the influence of 2 hours temperature action (+ 42 ºС) the most significant increase in peroxidase activity was found by 1.78 times and SOD by 1.89 times, as well as increase in its thermal stability by 1.35–1.42 times, respectively. The increase in peroxidase and SOD activity, as well as the increase in their thermal stability caused by hyperthermia were negated by pre-processing with a protein biosynthesis inhibitor cyclohexamide, which may indicate the participation of the protein-synthesizing system in this process. The effect of increasing the thermal stability of enzymes can be considered as a mechanism of adaptation of the protein-synthesizing system to the action of high temperatures. Increase in the activity and thermal stability of antioxidant enzymes is caused primarily by changes in the expression of stress protein genes, which control the synthesis of specific adaptogens and protectors. The obtained results indicate that the extreme conditions of the anthropogenically transformed environment contribute to the development of forms with the highest potential abilities. The mechanism of action of high temperatures is associated with the development of oxidative stress, which is manifested in the intensification of lipid peroxidation and the generation of superoxide anion radical. It was found that temperature stress and high insolation caused an increased generation of superoxide anion radical as the main inducers of protective reactions in the samples of B. caespiticium from the experimental transect of the sulfur mining heap. It is known that the synthesis of Н2О2 occurs under stress and is a signal to start a number of molecular, biochemical and physiological processes of cells, including adaptation of plants to extreme temperatures. It is shown that high temperatures initiate the generation of hydrogen peroxide. Increased reactive oxygen species (ROS) formation, including Н2О2, under the action of extreme temperatures, can cause the activation of signaling systems. Therefore, the increase in the content of Н2О2 as a signaling mediator is a component of the antioxidant protection system. It is determined that adaptive restructuring of the metabolism of the moss В. caespiticium is associated with the accumulation of signaling prooxidant components (diene and triene conjugates and dienketones). The increase in primary lipid peroxidation products, detected by us, under the action of hyperthermia may indicate the intensification of free radical oxidation under adverse climatic conditions in the area of the sulfur production dump, which leads to the intensification of lipid peroxidation processes. The accumulation of radical and molecular lipid peroxidation products are signals for the activation of protective systems, activators of gene expression and processes that lead to increased resistance of plants.


2013 ◽  
Vol 481 ◽  
pp. 129-132 ◽  
Author(s):  
J.P. Mendez ◽  
F. Macias ◽  
M.P. Ariza

We present an assessment of the stability and dynamics of grain boundaries in graphene for different misorientation angles at finite temperature and up to extremely high temperatures, in particular, for a misorientation angle of 6.6, 14.1, 19.66, 27.8, 38.21 and 46.83. We report a high stability against annihilation up to extreme temperatures.


2021 ◽  
Vol 900 (1) ◽  
pp. 012042
Author(s):  
N Stevulova ◽  
A Estokova

Abstract This paper is addressed to comparative study of changes in thermal stability of surface-modified hemp-hurds aggregates long-term incorporated in bio-aggregate-based composites with the original ones before their integration into alternative binder matrix. In this study, the effectiveness of alkaline treatment of hemp hurds compared to the raw bio-aggregates as well as in relation to their behaviour when they are long-term incorporated in the MgO-cement environment is investigated. The differences in the thermal behaviour of the samples are explained by the changed structure of hemp hurds constituents due to the pre-treatment and long-term action of the alternative binder components on the bio-aggregates. Alkaline treatment increases thermal stability of hemp hurds compared to raw sample. Also long-term incorporation of hemp hurds in MgO-cement matrix had a similar effect in case of alkaline modified bio-aggregates. The more alkali ions present in the structure of hemp hurdssamples, the more ash is formed during their thermal decomposition studied by thermal gravimetry (TG) and differential scanning calorimetry (DSC).


Author(s):  
V.N. Gadalov ◽  
A.V. Filonovich ◽  
I.V. Vornacheva ◽  
E.A. Filatov ◽  
I.A. Makarova

The positive effect of alloying elements on the thermal stability of the γ-matrix and the strengthening γ'-phase of casting nickel alloys, and consequently, on the increase in their heat-temperature strength is established. The alloying elements inhibit diffusion processes, thereby increasing the creep resistance of alloys at high temperatures and loads. It is found that the most indicative parameters of the phase composition of the test alloys are the alloying elements distribution coefficients between the γ- and γ'-phases. The basic principles of balanced alloying are formulated, on which the choice of the optimal chemical composition of heat-temperature nickel alloys is carried out.


2014 ◽  
Vol 1033-1034 ◽  
pp. 931-936
Author(s):  
Cong Yan Chen ◽  
Rui Lan Fan ◽  
Guan Qun Yun

A novel intumescent flame retardant (IFR) containing ferrocene and caged bicyclic phosphate groups, 1-oxo-4-[4'-(ferrocene carboxylic acid phenyl ester)] amide-2, 6, 7-trioxa-1-phosphabicyclo- [2.2.2] octane (PFAM), was successfully synthesized. The synthesized PFAM were added to flammable polyurethane (PU) as flame retardants and smoke suppressants. The structure of PFAM was characterized by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (1H NMR) and elemental analysis. Thermal stability of PFAM was tested by themogravimetric analysis (TGA). The results revealed that PFAM had good thermal stability and high char weight, the char weight up to 54% at 600 °C. Flammability properties of PU/PFAM composites were investigated by limiting oxygen index (LOI) test and UL-94 test, respectively. The results of LOI tests showed that the addition of PFAM enhanced flame retardancy of PU. When the content of PFAM reaches to 3%, the LOI value is 22.2. The morphologies of the char for PU and PU/3% PFAM composite can be obtained after LOI testing were examined by SEM. The results demonstrated that PFAM could promote to form the compact and dense intumescent char layer. Experiments showed that, the PFAM application of polyurethane showed positive effect.


2008 ◽  
Vol 111 (2-3) ◽  
pp. 542-547 ◽  
Author(s):  
L. Fernández-Romero ◽  
J.M. Montero-Moreno ◽  
E. Pellicer ◽  
F. Peiró ◽  
A. Cornet ◽  
...  

2011 ◽  
Vol 685 ◽  
pp. 340-344 ◽  
Author(s):  
Tung Wai Leo Ngai ◽  
Chang Xu Hu ◽  
Wei Zheng ◽  
Heng Xie ◽  
Yuan Yuan Li

Ti, SiC and their composite materials have been widely used as high temperature structural material. The knowledge of interfacial stability between SiC and Ti is vital in high temperature applications. In this study, SiC/Ti diffusion couples were prepared to investigate the interfacial reactions between SiC and Ti at 1273 K. Phase forming sequence, microstructure and thermal stability of SiC/Ti interface were studied. It was indicated that after annealed at 1273 K for 10 days, 4 reaction layers were formed at the SiC/Ti interface. The diffusion path between SiC and Ti is SiC/Ti3SiC2/Ti5Si3/Ti5Si3+TiC/Ti3Si/Ti. As the annealing time prolong, the thicknesses of these reaction layers increased.


2016 ◽  
Vol 683 ◽  
pp. 269-274 ◽  
Author(s):  
Vasily Sobolev ◽  
Sergey Ivlev ◽  
Vladimir Shagalov ◽  
Roman Ostvald ◽  
Ivan Zherin

The barium fluorobromate(III) was obtained as the product of interaction between barium fluoride and bromine(III) trifluoride. The heat of formation of Ba(BrF4)2 was found by isothermal calorimetry method. By the TG/DT analysis the thermal stability of Ba(BrF4)2 was researched. It was found that this compound is mostly stable in the atmosphere or argon up to 250 °C. It was shown that bromine trifluoride and its derive compounds with alkali and alkali-earth metals fluorides can be applied like a highly-active brominating agent in case of production of various composite materials based on polyhalogenated aromatics.


2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
Łukasz Klapiszewski ◽  
Karol Bula ◽  
Marta Sobczak ◽  
Teofil Jesionowski

Functional silica-lignin dual fillers were obtained via mechanical grinding of the components (Syloid 244 silica and kraft lignin). Of particular importance here is the fact that lignin is a natural polymer and particularly that it is a waste by-product of paper production, whose recycling is highly desirable. The product underwent comprehensive dispersive-morphological and thermal analysis. SiO2-lignin hybrid fillers were also used in polypropylene-based composites, extruded via corotating a twin screw machine with different screw speeds. The thermogravimetric data obtained for the extrudates confirmed that the application of the lignin into PP produces a significant char residue. Addition of silica to lignin via this new hybrid formulation has a positive effect on the thermal stability of PP/silica-lignin composites, which can be seen even when observing the temperature for the maximum rate of weight reduction. Tensile test results show that the addition of silica by means of dual filler incorporation improves the mechanical parameters in comparison with pure PP and PP/lignin composite.


2006 ◽  
Vol 249 ◽  
pp. 127-134 ◽  
Author(s):  
Dominique Mangelinck

The effect of Pt and Ge on the stability of NiSi films has been examined. The addition of a small amount of Pt (5 at%) in the Ni film increases the disilicide nucleation temperature to 900oC leading to a better stability of NiSi at high temperatures. For Ni films on Si1-xGex with x=0.29 and 0.58, no NiSi2 was found after annealing at 850°C. The increase in thermal stability of NiSi has been explained in terms of nucleation concept. Calculated ternary phase diagrams allow to understand the effect of the third element (Pt or Ge) on the driving force for nucleation. The redistribution of this element can also be explained with the ternary phase diagrams.


Sign in / Sign up

Export Citation Format

Share Document