Investigation of the Effect of Modifying the AlSi7Mg0.3 Alloy with a Fast-Cooled Master Alloy Using Heat Treatment

2021 ◽  
Vol 904 ◽  
pp. 59-64
Author(s):  
Viktor Alekseevich Kukartsev ◽  
Aleksandr Ivanovich Cherepanov ◽  
Vadim Sergeevich Tynchenko ◽  
Sergei Georgievich Dokshanin ◽  
Natalia Anatolievna Dalisova
Keyword(s):  
Corrosion Resistance ◽  
New Technologies ◽  
Shrinkage Porosity ◽  
High Tech ◽  
Aluminum Silicon Alloy ◽  
Construction Machine ◽  
Complex Shapes ◽  
The Cost ◽  
Foundry Workers ◽  
Cast Parts

The development of modern high-tech industries of industrial production is impossible without the development of new methods for processing materials with high mechanical characteristics. There is a growing need for an increase in the proportion of parts made of aluminum alloys, a more complex configuration of cast parts, an increase in their reliability and durability in operation, etc. All this poses for metallurgists and foundry workers the task of creating new technologies for producing alloys, improving the technical and economic characteristics of structural materials, improving the quality and reducing the cost of castings.Hypoeutectic silumins have good casting properties, good weldability, machinability and corrosion resistance. However, they are prone to the formation of a coarse needle-like state, which reduces their useful characteristics. To eliminate this phenomenon, it is necessary to apply special technologies and the most common is their modification, which provides grain refinement. This makes it possible to use silumins for the manufacture of castings of complex shapes with increased density and low shrinkage porosity. Such parts can withstand average loads in critical units. Aluminum-silicon alloy AK7 or (ASi7Mg0.3) is a typical silumin, which is in demand in the automotive industry, construction, aircraft construction, machine, automobile and tractor production. It is appreciated for its good casting properties, weldability, machinability and corrosion resistance.

Artificial Intelligence as a Technological Innovation to Accelerate Economic Development

2019 ◽  
Vol 12 (3) ◽  
pp. 125-133
Author(s):  
S. V. Shchurina ◽  
A. S. Danilov
Keyword(s):  
Artificial Intelligence ◽  
Economic Development ◽  
Technological Innovation ◽  
Manufacturing Industry ◽  
New Technologies ◽  
Retail Trade ◽  
High Tech ◽  
Industrial Complex ◽  
Technological Gap ◽  
The Government

The subject of the research is the introduction of artificial intelligence as a technological innovation into the Russian economic development. The relevance of the problem is due to the fact that the Russian market of artificial intelligence is still in the infancy and the necessity to bridge the current technological gap between Russia and the leading economies of the world is coming to the forefront. The financial sector, the manufacturing industry and the retail trade are the drivers of the artificial intelligence development. However, company managers in Russia are not prepared for the practical application of expensive artificial intelligence technologies. Under these circumstances, the challenge is to develop measures to support high-tech projects of small and medium-sized businesses, given that the technological innovation considered can accelerate the development of the Russian economy in the energy sector fully or partially controlled by the government as well as in the military-industrial complex and the judicial system.The purposes of the research were to examine the current state of technological innovations in the field of artificial intelligence in the leading countries and Russia and develop proposals for improving the AI application in the Russian practices.The paper concludes that the artificial intelligence is a breakthrough technology with a great application potential. Active promotion of the artificial intelligence in companies significantly increases their efficiency, competitiveness, develops industry markets, stimulates introduction of new technologies, improves product quality and scales up manufacturing. In general, the artificial intelligence gives a new impetus to the development of Russia and facilitates its entry into the five largest world’s economies.

RED X-20

Alloy Digest ◽  
1960 ◽  
Vol 9 (2) ◽  
Keyword(s):  
Wear Resistance ◽  
Thermal Expansion ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Coefficient Of Thermal Expansion ◽  
Heat Treating ◽  
Aluminum Silicon Alloy ◽  
Temperature Performance

Abstract RED X-20 is a heat treatable hypereutectic aluminum-silicon alloy with excellent wear resistance and a very low coefficient of thermal expansion. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-89. Producer or source: Apex Smelting Company.

Tools for the development of innovative entrepreneurship in the region

2019 ◽  
pp. 66-72
Author(s):  
V. P. Basenko ◽  
V. A. Dianova
Keyword(s):  
New Technologies ◽  
High Tech ◽  
Organizational Forms ◽  
Public And Private ◽  
Economic Agents ◽  
Russian Economy ◽  
New Organizational Forms ◽  
Innovative Solution ◽  
Public And Private Cooperation ◽  
Effective Use

The article is devoted to the problems of innovative enterprise development. Since the Russian economy is in a state of financial and economic stagnation, there is a need to apply radically new innovative directions of business activities that ensure the effective use of financial potential within the framework of national projects. Practice shows that today the business sector in Russia is not able to provide a full-fledged demand for new technologies. Therefore, there is a need for substantial state support to provide centralized orders for high-tech industries. There are already examples of combining the efforts of a number of Autonomous economic entities to implement innovative reforms, new organizational forms of interaction have been formed, such as: centers for the implementation of innovative ideas; centers for engineering services; business incubators, etc. The subjects of these organizational forms of cooperation developed and proposed measures aimed at innovative solution of technological problems relevant to the regional economy, as well as for the country as a whole. Link for the efficient interaction of economic agents becomes an inherent characteristic, is the need of implementation of mechanisms of coordination with “network interaction”. It is important to note the fact that the existing relations and forms of regulation of various systems are not permanent, there are no strategic concepts aimed at long-term public and private cooperation.

Highly Active Modified Variants of Recombinant Phospholipase А2 from Streptomyces violaceoruber for Effective Biosynthesis in Yeasts

2019 ◽  
pp. 30-41 ◽  
Author(s):  
E.P. Sannikova ◽  
A.V. Malysheva ◽  
F.A. Klebanov ◽  
D.G. Kozlov
Keyword(s):  
New Technologies ◽  
Specific Activity ◽  
Point Mutations ◽  
Egg Yolk ◽  
Enzyme Preparations ◽  
Highly Active ◽  
High Calcium ◽  
Pla2 Enzyme ◽  
Streptomyces Violaceoruber ◽  
The Cost

The capacity of yeast to produce the highly active variants of PLA2 has been confirmed. The high-active variants were based on the original enzyme from the strain А-2688 of Streptomyces violaceoruber. To reduce the enzyme toxicity and to increase its expression, various approaches were tested including point mutations, construction of artificial N- and/or C-end pro-regions, hybridization with other proteins and engineering or inactivation of glycosylation sites. As a main result, the modified PLA2 enzymes were obtained which have the same secretion level as their low-active predecessors, but specific activity of which was at least tenfold higher. As the main feature, the selected mutants were characterized by a lower affinity for Ca2+ that probably accounts for their low toxicity (and high expression capacity) at the stage of biosynthesis and their ability to activate under special conditions, e.g. during the egg yolk fermentation. The data obtained can provide a basis for the cost reduction of highly active PLA2 enzyme preparations in industries where the application of high calcium concentrations is allowed. recombinant phospholipase А2, Streptomyces violaceoruber, yeasts, secretion, producer strain The work was initiated by the Innovation Center Biriuch - New Technologies, Ltd., and was supported within the framework of the State Assignment no. 595-00004-18 PR.

scholarly journals Design and Adoption of Low-Cost Point-of-Care Diagnostic Devices: Syrian Case

Micromachines ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 882
Author(s):  
M. Munzer Alseed ◽  
Hamzah Syed ◽  
Mehmet Cengiz Onbasli ◽  
Ali K. Yetisen ◽  
Savas Tasoglu
Keyword(s):  
Civil Wars ◽  
Healthcare Workers ◽  
New Technologies ◽  
Point Of Care ◽  
Low Cost ◽  
Healthcare Services ◽  
Efficient Solutions ◽  
Humanitarian Crises ◽  
Technology Experience ◽  
The Cost

Civil wars produce immense humanitarian crises, causing millions of individuals to seek refuge in other countries. The rate of disease prevalence has inclined among the refugees, increasing the cost of healthcare. Complex medical conditions and high numbers of patients at healthcare centers overwhelm the healthcare system and delay diagnosis and treatment. Point-of-care (PoC) testing can provide efficient solutions to high equipment cost, late diagnosis, and low accessibility of healthcare services. However, the development of PoC devices in developing countries is challenged by several barriers. Such PoC devices may not be adopted due to prejudices about new technologies and the need for special training to use some of these devices. Here, we investigated the concerns of end users regarding PoC devices by surveying healthcare workers and doctors. The tendency to adopt PoC device changes is based on demographic factors such as work sector, education, and technology experience. The most apparent concern about PoC devices was issues regarding low accuracy, according to the surveyed clinicians.

scholarly journals Embracing Industry 4.0: Empirical Insights from Malaysia

Informatics ◽  
2021 ◽  
Vol 8 (2) ◽  
pp. 30
Author(s):  
Mansoor Ahmed Soomro ◽  
Mohd Hizam-Hanafiah ◽  
Nor Liza Abdullah ◽  
Mohd Helmi Ali ◽  
Muhammad Shahar Jusoh
Keyword(s):  
Industry 4.0 ◽  
New Technologies ◽  
Descriptive Study ◽  
Digital Transformation ◽  
Quantitative Approach ◽  
Survey Questionnaire ◽  
Digital Revolution ◽  
Leadership Strategy ◽  
The Right ◽  
The Cost

Industry 4.0 revolution, with its cutting-edge technologies, is an enabler for businesses, particularly in reducing the cost and improving the productivity. However, a large number of organizations are still too in their infancy to leverage the true potential of Industry 4.0 and its technologies. This paper takes a quantitative approach to reveal key insights from the companies that have implemented Industry 4.0 technologies. For this purpose, 238 technology companies in Malaysia were studied through a survey questionnaire. As technology companies are usually the first in line to adopt new technologies, they can be studied better as leaders in adopting the latest technologies. The findings of this descriptive study surfaced an array of insights in terms of Industry 4.0 readiness, Industry 4.0 technologies, leadership, strategy, and innovation. This research paper contributes by providing 10 key empirical insights on Industry 4.0 that can be utilized by managers to pace up their efforts towards digital transformation, and can help the policymakers in drafting the right policy to drive the digital revolution.

scholarly journals The Implementation of Spectral Element Method in a CAE System for the Solution of Elasticity Problems on Hybrid Curvilinear Meshes

2017 ◽  
Vol 2017 ◽  
pp. 1-7 ◽  
Author(s):  
Dmitriy Konovalov ◽  
Anatoly Vershinin ◽  
Konstantin Zingerman ◽  
Vladimir Levin
Keyword(s):  
Mathematical Simulation ◽  
High Performance ◽  
Spectral Element Method ◽  
New Technologies ◽  
Spectral Element ◽  
High Tech ◽  
Engineering Analysis ◽  
Elasticity Problems ◽  
Cae System ◽  
Element Method

Modern high-performance computing systems allow us to explore and implement new technologies and mathematical modeling algorithms into industrial software systems of engineering analysis. For a long time the finite element method (FEM) was considered as the basic approach to mathematical simulation of elasticity theory problems; it provided the problems solution within an engineering error. However, modern high-tech equipment allows us to implement design solutions with a high enough accuracy, which requires more sophisticated approaches within the mathematical simulation of elasticity problems in industrial packages of engineering analysis. One of such approaches is the spectral element method (SEM). The implementation of SEM in a CAE system for the solution of elasticity problems is considered. An important feature of the proposed variant of SEM implementation is a support of hybrid curvilinear meshes. The main advantages of SEM over the FEM are discussed. The shape functions for different classes of spectral elements are written. Some results of computations are given for model problems that have analytical solutions. The results show the better accuracy of SEM in comparison with FEM for the same meshes.

BRICS Countries Possible Areas for Scientific Cooperation

2015 ◽  
pp. 14-23
Author(s):  
I. Dezhina
Keyword(s):  
Research And Development ◽  
New Technologies ◽  
Technological Development ◽  
High Tech ◽  
Preliminary Evaluation ◽  
Exploratory Research ◽  
Scientific Cooperation ◽  
Brics Countries ◽  
The World ◽  
A Share

The article evaluates science sectors and effectiveness of scientific research in the countries forming the BRICS group, as well as the current state of scientific and technological cooperation among the group members. The science sectors of the countries under consideration differ markedly, while facing similar problems relating to government regulations and external environments. The differences exist in total expenditures on research and development (as a share of GNP), in the scope of governmental funding (large in Russia and India, but small in China), and in the distribution of allocations among various areas and types of R&D activities. China appears to have the most well-adjusted science sector among the BRICS members. It includes not only strong universities but also high-tech companies that invest actively into research and development. The overall impact (inferred from citation indexes) of fundamental and exploratory research performed in BRICS countries remains low. BRICS's scientists prefer to collaborate with their colleagues from the world-leading countries rather than with their fellows from BRICS. Yet, in contrast to the world trend, in all BRICS countries, except Russia, a share of internationally co-authored publications is now decreasing. BRICS members have more similar interests and priorities in technological development, including infrastructural and large technological projects, than in science. Currently, bilateral cooperation in technology prevails, while the projects involving all members of the group still remain at the stage of preliminary evaluation and discussion. Russia cooperates most closely with China and India, including joint projects in such high-priority directions as new materials, photonics, biomedical, space and information technologies. For Russia, cooperation in technological development appears to be of most interest because it can lead not only to introduction of new technologies but also help to create large Russian innovative companies. Development of successful multilateral cooperation in science and technology among the BRICS members is the key for this group, originally formed for geopolitical reasons, to evolve into an effective economic union.

Review of recent developments on improvement of estimated regulatory documentation for road works

2021 ◽  
Vol 2021 (23) ◽  
pp. 31-42
Author(s):  
Anatolii Tsynka ◽  
◽  
Andrii Hrinchuk ◽  
Ivan Rakovych ◽  
◽  
...  
Keyword(s):  
Work Performance ◽  
New Technologies ◽  
Operation Time ◽  
Road Construction ◽  
Labor Costs ◽  
The Road ◽  
Regulatory Documents ◽  
Road Work ◽  
Investment Process ◽  
The Cost

Introduction. In the modern conditions of the pricing system in the construction of Ukraine, the key value have the estimated norms, which are presented in separate collections, the main purpose of which is to determine the standard quantity of resources required to perform a particular type of work as a basis for the transition to the cost indicators. In order to determine the cost of road work objectively and accurately, it is essential that the indicators of estimated norms meet the requirements of regulatory documents and modern methods of execution of road works.Problematics. In connection with the active improvement of the regulatory base of the road construction industry, permanent upgrade of road organizations technique fleet, the introduction of new technologies and materials in construction and operation of roads, improving the methods of work there is a discrepancy between the existing resource element of estimated norms and the actual conditions of work in terms of built-up labor costs, the operation time of machines and mechanisms and the range of materials. Accordingly, it affects the reliability and accuracy of determining the cost of road works.Purpose. Improvement and harmonization with actual working conditions and requirements of regulatory documents of industry regulatory and estimate base of resource elementary estimated norms for work performed during construction, reconstruction, repair and operational maintenance of roads and bridges to ensure reliable and valid technical, economic and estimated calculations.Materials and methods. During work performance the analysis of the regulatory documentation, establishing the requirements to the technology of road works and materials has been carried out. A number of chronometric observations with the measurement of time of road works in full-scale conditions was carried out. The obtained data were summarized, averaged and on their basis the indicators of the resource element of the estimated norms were estimated.Results. A review of the main amendments and additions, which came into force after the approval of Amendment No 2 SOU 42.1-37641918-035:2018 [1] and Amendment No 2 SOU 42.1-37641918-071:2018 [2], which were developed to improve the regulatory-estimate base for the calculation of road works, taking into account the requirements and provisions of existing regulatory documents taking into account the current state of scientific and technological progress in the road sector.Conclusions. The above analysis of the amendments that came into force with the approval of [1]. and [2] will systematize the innovations provided by the requirements of current regulatory documents on the calculation of the cost of road works and the development of relevant documents at all stages of the investment process, planning and organization of road works, as well as the writing-off of material resources. Review and systematization of recent improvements in the estimated regulatory documents for road works will provide an opportunity to optimally plan the use of available material, labor and financial resources, often limited.Keywords: public road, operational maintenance, investment documentation, overhaul and current repairs, machine, mechanism, regulatory document, resource element estimate norm, Standard of Organization of Ukraine.

A Very Low-Cost, Labor-Efficient, and Simple Method to Block Scattered Ultraviolet Light in PDMS Microfluidic Devices by Inserting Aluminum Foil Strips

2018 ◽  
Vol 11 (1) ◽  
Author(s):  
Shuo Wang ◽  
Peter Shankles ◽  
Scott Retterer ◽  
Yong Tae Kang ◽  
Chang Kyoung Choi
Keyword(s):  
Soft Lithography ◽  
Uv Light ◽  
Low Cost ◽  
Microfluidic Devices ◽  
Aluminum Foil ◽  
Material Synthesis ◽  
Simple Method ◽  
Micro Particles ◽  
Complex Shapes ◽  
The Cost

Abstract Opto-microfluidic methods have advantages for manufacturing complex shapes or structures of micro particles/hydrogels. Most of these microfluidic devices are made of polydimethylsiloxane (PDMS) by soft lithography because of its flexibility of designing and manufacturing. However, PDMS scatters ultraviolet (UV) light, which polymerizes the photocrosslinkable materials at undesirable locations and clogs the microfluidic devices. A fluorescent dye has previously been employed to absorb the scattered UV light and shift its wavelength to effectively solve this issue. However, this method is limited due to the cost of the materials (tens of dollars per microchip), the time consumed on synthesizing the fluorescent material and verifying its quality (two to three days). More importantly, significant expertise on material synthesis and characterization is required for users of the opto-microfluidic technique. The cost of preliminary testing on multiple iterations of different microfluidic chip designs would also be excessive. Alternatively, with a delicate microchannel design, we simply inserted aluminum foil strips (AFS) inside the PDMS device to block the scattered UV light. By using this method, the UV light was limited to the exposure region so that the opto-microfluidic device could consistently generate microgels longer than 6 h. This is a nearly cost- and labor-free method to solve this issue.

Sign in / Sign up

Export Citation Format

Share Document