Drawing of Square Blanks in a Cylindrical Die with Controlled Movement of the Edges

2021 ◽  
Vol 1037 ◽  
pp. 281-286
Author(s):  
Sergey Nikolaevich Larin ◽  
Nikita A. Samsonov
Keyword(s):  
Computer Modeling ◽  
Experimental Work ◽  
Metal Loss ◽  
Additional Increase ◽  
Plastic Forming ◽  
Reduce Metal Loss ◽  
Main Operation

Plastic forming, in many cases, includes the drawing of hollow cylindrical products as the main operation. For the manufacture of such products, round blanks are used as semi-finished products. However, during the blank production from strips or tapes, their geometry causes a very significant metal loss. A very effective way to reduce metal loss is to replace round billets with square ones. The use of square blanks gives an additional increase in the height of the products. In this regard, the article investigates the drawing of a square blank into a cylindrical die. The research was carried out on the basis of the analysis of experimental work and computer modeling. According to the results of the research the rational ratios of the geometric dimensions of the tool and workpieces are found.

scholarly journals Aluminium Alloys Smelting in Shaft- Reverberatory Furnaces in a Liquid Bath Mode

2017 ◽  
Vol 17 (2) ◽  
pp. 183-189
Author(s):  
V. Grachev
Keyword(s):  
Aluminum Alloys ◽  
Lower Energy ◽  
High Efficiency ◽  
Reverberatory Furnace ◽  
Continuous Operation ◽  
Liquid Bath ◽  
Metal Loss ◽  
Energy Costs ◽  
Efficiency And Productivity ◽  
Reduce Metal Loss

AbstractThe aim of research was creation of a furnace for aluminum alloys smelting “in a liquid bath” in order to reduce metal loss. In the paper, the author demonstrates the results of research on smelting of aluminum alloys in a shaft-reverberatory furnace designed by the author. It has been shown that smelting aluminum alloy in a liquid bath was able to significantly reduce aluminum loss and that shaft-reverberatory design provided high efficiency and productivity along with lower energy costs. Ensuring continuous operation of the liquid bath and superheating chamber, which tapped alloy with the required texture, was achieved by means of the optimal design of partition between them. The optimum section of the connecting channels between the liquid bath of smelting and the superheating chamber has been theoretically substantiated and experimentally confirmed. The author proposed a workable shaft-reverberatory furnace for aluminum alloys smelting, providing solid charge melting in a liquid bath.

Longitudinal Changes in Individual BrainAGE in Healthy Aging, Mild Cognitive Impairment, and Alzheimer’s Disease

GeroPsych ◽  
2012 ◽  
Vol 25 (4) ◽  
pp. 235-245 ◽  
Author(s):  
Katja Franke ◽  
Christian Gaser
Keyword(s):  
Alzheimer’S Disease ◽  
Alzheimer's Disease ◽  
Healthy Aging ◽  
Brain Aging ◽  
Elderly Subjects ◽  
Additional Increase ◽  
Longitudinal Changes ◽  
Novel Method ◽  
The Brain

We recently proposed a novel method that aggregates the multidimensional aging pattern across the brain to a single value. This method proved to provide stable and reliable estimates of brain aging – even across different scanners. While investigating longitudinal changes in BrainAGE in about 400 elderly subjects, we discovered that patients with Alzheimer’s disease and subjects who had converted to AD within 3 years showed accelerated brain atrophy by +6 years at baseline. An additional increase in BrainAGE accumulated to a score of about +9 years during follow-up. Accelerated brain aging was related to prospective cognitive decline and disease severity. In conclusion, the BrainAGE framework indicates discrepancies in brain aging and could thus serve as an indicator for cognitive functioning in the future.

Computer modeling of the mitral valve for planning of complex repairs

2013 ◽  
Vol 61 (S 01) ◽  
Author(s):  
CJ Beller ◽  
I Baxter ◽  
K Kallenbach ◽  
T Mesana ◽  
M Labrosse
Keyword(s):  
Mitral Valve ◽  
Computer Modeling

Computer Modeling-Assisted Design And Synthesis Of Flavonols Derivatives As Proteasome Inhibitors

Planta Medica ◽  
2016 ◽  
Vol 82 (05) ◽  
Author(s):  
KY Orabi ◽  
MS Abaza ◽  
KA ElSayed ◽  
AY Elnagar ◽  
SI Faggal ◽  
...  
Keyword(s):  
Computer Modeling ◽  
Proteasome Inhibitors ◽  
Design And Synthesis

The Role of Computer Modeling in Electrocardiography

1990 ◽  
Vol 29 (04) ◽  
pp. 282-288 ◽  
Author(s):  
A. van Oosterom
Keyword(s):  
Electrical Activity ◽  
Computer Modeling ◽  
Body Surface ◽  
Electrical Current ◽  
The Body ◽  
Volume Conductor ◽  
Current Generator ◽  
Cardiac Electrical Activity ◽  
Source Models

AbstractThis paper introduces some levels at which the computer has been incorporated in the research into the basis of electrocardiography. The emphasis lies on the modeling of the heart as an electrical current generator and of the properties of the body as a volume conductor, both playing a major role in the shaping of the electrocardiographic waveforms recorded at the body surface. It is claimed that the Forward-Problem of electrocardiography is no longer a problem. Several source models of cardiac electrical activity are considered, one of which can be directly interpreted in terms of the underlying electrophysiology (the depolarization sequence of the ventricles). The importance of using tailored rather than textbook geometry in inverse procedures is stressed.

COMPUTER MODELING OF FINANCIAL CALCULATIONS

2019 ◽  
pp. 33-37
Author(s):  
O. S. Korneva
Keyword(s):  
Computer Modeling ◽  
Professional Education ◽  
Information Technologies ◽  
Financial Education ◽  
Economic Education ◽  
Economic Activities ◽  
School Teachers ◽  
University Teachers ◽  
Educational Literature ◽  
Higher Professional Education

Within the implementation of the national strategy for improving financial competency and financial education in Russia, aimed at the broad masses of the population, any experience in promoting financial competency among young people, accumulated in the system of training bachelors of Economics, will be useful. The purpose of the article is to present the methodological and practical aspects of teaching the basics of financial calculations of future economists and the formation of computer modeling skills in the field of financial and economic activity. The reason for writing the article was the problem of interdisciplinary integration in the system of financial and economic education. The analysis of educational literature and curricula of the system of secondary and higher professional education, as well as the study and generalization of pedagogical experience showed weak integration of mathematical and economic disciplines with information technologies. The article also presents the problems associated with the calculations in the financial and economic activities with the use of computer modeling. The elements of the presented methods of teaching the basics of financial computing in conjunction with the modeling of financial problems on the computer can be useful for both school teachers and university teachers of mathematics and computer science.

Studi Laju Korosi Internal Pipa Baja Api 5L Grade B Berdasarkan Metode Pengukuran Metal Loss Dengan Ultrasonic Dan Polarisasi Resistance Dengan Variasi Konsentrasi Klorida

2019 ◽  
Vol 4 (2) ◽  
Author(s):  
Supriyadi Supriyadi
Keyword(s):  
Analysis Of Variance ◽  
Metal Loss ◽  
Thickness Meter ◽  
Ultrasonic Thickness

Pipa  penyalur  minyak  umumnya  menggunakan  material  baja  karbon.  Salah  satu  masalah  besar  dalam penggunaan material tersebut yang berkaitan dengan korosi yaitu terjadinya kebocoran akibat adanya pengaruh konsentrasi ion klorida yang terlarut dalam media air sehingga lingkungan bersifat korosif (asam). Oleh karena itu sebagai upaya untuk mengatasi masalah tersebut perlu diketahui besaran laju korosi material baja karbon tersebut. Dalam penelitian ini dilakukan perbandingan antara laju korosi yang diperoleh dari metode pengujian linear polarisasi resistance dan pengukuran metal loss dengan peralatan ultrasonic thickness meter. Output dari kedua metode tersebut selanjutnya diperoleh hubungan laju korosi melalui analysis of variance dengan menggunakan software. Studi pengaruh kadar klorida dilakukan untuk mengetahui korosi internal pipa baja karbon API 5L Grade B yang digunakan sebagai pipa penyalur minyak di lapangan. Metode pengujian polarisasi resistance dilakukan dalam media larutan air formasi NaCl 1%, 2% dan 3.5%. Laju korosi internal pipa baja karbon API 5L Grade B cenderung meningkat seiring dengan meningkatnya konsentrasi klorida dalam media larutan. Penelitian ini juga menunjukkan bahwa pipa baja karbon API 5L Grade B memiliki ketahanan korosi yang cukup pada fluida dengan konsentrasi klorida 1%, 2% dan 3.5%.

Research into the Effect of Photometric Flicker Event on the Perception of Office Workers

2019 ◽  
pp. 22-27
Author(s):  
Cenk Yavuz ◽  
Ceyda Aksoy Tırmıkç ◽  
Burcu Çarklı Yavuz
Keyword(s):  
Experimental Work ◽  
Psychological Problems ◽  
Office Workers ◽  
Questionnaire Study ◽  
Fast Growing ◽  
Lighting Conditions ◽  
Lighting Systems ◽  
Enormous Number

Today the number of office workers has reached to an enormous number due to the fast-growing technology. Most of these office workers spend long hours in enclosed spaces with little/no daylight penetration. The lack of daylight causes physiological and psychological problems with the workers. At this point lighting systems become prominent as the source and the solution of the problem. Photometric flicker event which arises in the lighting systems can sometimes become visible and brings a lot of issues with it. In this paper, an experimental work has been done to investigate the effect of flicker. For this purpose, the flicker values of 3 different experiment rooms for different lighting conditions and scenarios have been measured and a questionnaire study has been carried out in the experiment rooms with 30 participants. In conclusion, the effect of the flicker event on the volunteers have been classified and some methods have been proposed not to experience flicker effects.

Sign in / Sign up

Export Citation Format

Share Document