Thermal Cycling Treatment and Structural Changes in Cu-Al-Ni Monocrystalline Alloys

2006 ◽  
Vol 514-516 ◽  
pp. 692-696 ◽  
Author(s):  
Rui Jorge C. Silva ◽  
L.A. Matlakhova ◽  
E.C. Pereira ◽  
A.N. Matlakhov ◽  
Sérgio Neves Monteiro ◽  
...  
Keyword(s):  
Thermal Cycling ◽  
Structural Changes ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Critical Range ◽  
Cycling Treatment ◽  
Ni Alloy ◽  
Before And After ◽  
Number Of Cycles

In the present work a monocrystalline Cu-13.5Al-4Ni (wt.%) alloy with shape memory effect (SME) submitted to thermal cycling inside the critical range was investigated in terms of number of cycles and resulting structural changes. Attention was paid to the structural changes associated with reversible β1↔γ’1 martensite transformation. The monocrystalline Cu-Al-Ni alloy was produced in Russia, according to a specific technology. The structural characteristic of the alloys was studied through optical microscopy and X-ray diffraction methods using Cu-Kα radiation. Differential scanning calorimetry permitted the determination of the temperature range as well as a thermal effect due to the β1↔γ’1 martensitic reversible transformations, before and after 100, 200 and 300 thermal cycles.

Influence of the homehold composting conditions on the structural changes of polylactide spun-bonded nonwovens during degradation

2016 ◽  
Vol 87 (20) ◽  
pp. 2541-2549 ◽  
Author(s):  
Michał Puchalski ◽  
Piotr Siwek ◽  
Tadeusz Biela ◽  
Sławomir Sztajnowski ◽  
Michał Chrzanowski ◽  
...  
Keyword(s):  
Supramolecular Structure ◽  
Structural Changes ◽  
Physical And Mechanical Properties ◽  
Size Exclusion ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Before And After ◽  
Exclusion Chromatography ◽  
Chicken Litter ◽  
Multiangle Laser Light Scattering

In this study, the influence of homehold composting conditions on the molecular and supramolecular structure of polylactide (PLA) in the form of spun-bonded nonwovens was investigated. Nonwoven samples were studied using size-exclusion chromatography coupled with multiangle laser light scattering detection, wide-angle X-ray diffraction, differential scanning calorimetry and Fourier transform infrared spectroscopy. In addition, the physical and mechanical properties of the nonwovens before and after composting were determined. The results show the varying degree of influence of the prepared compost mixtures of soil with common horticultural additives, such as chalk, commercially available agents, cow manure and chicken litter, on the molecular and supramolecular structure of PLA and its degradation rate. The obtained experiment explained which popular homehold agent had the strongest affect on the PLA nonwoven dedicated for agriculture use in the first period of season composting (first 6 months).

Effect of polyphosphate binding on the chain dynamic of caseins: investigation by differential scanning calorimetry and thermally stimulated currents

1988 ◽  
Vol 55 (3) ◽  
pp. 401-412 ◽  
Author(s):  
Alain Lamure ◽  
Jean-François Pommert ◽  
Alain Klaebe ◽  
Colette Lacabanne ◽  
Jean-Jacques Perie
Keyword(s):  
Differential Scanning Calorimetry ◽  
Structural Changes ◽  
Water Molecules ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Thermally Stimulated Currents ◽  
Transmission Electron ◽  
Different Types ◽  
Before And After ◽  
Chain Dynamic

SummarySamples of caseins having different Ca contents as used in cheese processing were analysed by techniques using differential scanning calorimetry and thermally stimulated currents (TSC) before and after treatment with Na poly-phosphate, a food additive used in the manufacture of processed cheese. These techniques revealed structural changes induced by the salt, and the different types of water molecules associated with the protein are evident. This characterization is in agreement with results obtained by other techniques, particularly X-ray diffraction of proteins. Transmission electron microscopy of the same samples confirmed that the changes observed by TSC were associated with an unravelling of the protein.

Determination of the Physical Properties of Oil Sands Components using Scanning Probe Microscopy

2015 ◽  
Vol 1754 ◽  
pp. 69-74
Author(s):  
Ravi Gaikwad ◽  
Tinu Abraham ◽  
Aharnish Hande ◽  
Fatemeh Bakhtiari ◽  
Siddhartha Das ◽  
...  
Keyword(s):  
Oil Sands ◽  
Structural Changes ◽  
Rational Approach ◽  
Kelvin Probe ◽  
Scanning Calorimetry ◽  
Probe Microscopy ◽  
Kelvin Probe Microscopy ◽  
Force Microscopy ◽  
Atomic Force

ABSTRACTAtomic force microscopy is employed to study the structural changes in the morphology and physical characteristics of asphaltene aggregates as a function of temperature. The exotic fractal structure obtained by evaporation-driven asphaltene aggregates shows an interesting dynamics for a large range of temperatures from 25°C to 80°C. The changes in the topography, surface potential and adhesion are unnoticeable until 70°C. However, a significant change in the dynamics and material properties is displayed in the range of 70°C - 80°C, during which the aspahltene aggregates acquire ‘liquid-like’ mobility and fuse together. This behaviour is attributed to the transition from the pure amorphous phase to a crystalline liquid phase which occurs at approximately 70°C as shown by using Differential Scanning Calorimetry (DSC). Additionally, the charged nature of asphaltenes and bitumen is also explored using kelvin probe microscopy. Such observations can lead to the development of a rational approach to the fundamental understanding of asphaltene aggregation dynamics and may help in devising novel techniques for the handling and separation of asphaltene aggregates using dielectrophoretic methods.

scholarly journals The effect of structural changes during sintering on the electric and magnetic traits of the Ni96.7Mo3.3 alloy nanostructured powder

2009 ◽  
Vol 41 (2) ◽  
pp. 175-184 ◽  
Author(s):  
L. Ribic-Zelenovic ◽  
M. Spasojevic ◽  
A. Maricic ◽  
M.M. Ristic
Keyword(s):  
Electrical Resistivity ◽  
Magnetic Permeability ◽  
Structural Relaxation ◽  
Crystalline Phase ◽  
Structural Changes ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Fcc Lattice ◽  
Lower Permeability ◽  
Structural Powder

Ni96.7Mo3.3 powder was electrochemically obtained. An X-ray diffraction analysis determined that the powder consisted of a 20% amorphous and 80% crystalline phase. The crystalline phase consisted of a nanocrystalline solid nickel and molybdenum solution with a face-centred cubic (FCC) lattice with a high density of chaotically distributed dislocations and high microstrain value. The scanning electronic microscopy (SEM) showed that two particle structures were formed: larger cauliflower-like particles and smaller dendriteshaped ones. The thermal stability of the alloy was examined by differential scanning calorimetry (DSC) and by measuring the temperature dependence of the electrical resistivity and magnetic permeability. Structural powder relaxation was carried out in the temperature range of 450 K to 560 K causing considerable changes in the electrical resistivity and magnetic permeability. Upon structural relaxation, the magnetic permeability of the cooled alloy was about 80% higher than the magnetic permeability of the fresh powder. The crystallisation of the amorphous portion of the powder and crystalline grain increase occurred in the 630 K to 900 K temperature interval. Upon crystallisation of the amorphous phase and crystalline grain increase, the powder had about 50% lower magnetic permeability than the fresh powder and 3.6 times lower permeability than the powder where only structural relaxation took place.

XRD investigation of thermal degradation of some gamma-irradiated polyethylene terephthalate samples

2019 ◽  
Vol 33 (12) ◽  
pp. 1950111 ◽  
Author(s):  
Mihai Todica ◽  
Zoltan Kovacs-Krauss ◽  
Carmen Niculaescu ◽  
Marieta Mureşan-Pop
Keyword(s):  
Thermal Treatment ◽  
Polyethylene Terephthalate ◽  
Structural Changes ◽  
Diffraction Method ◽  
Resonance Spectroscopy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Before And After ◽  
Gamma Irradiated ◽  
Different Doses

The modification of local structure of some commercial polyethylene terephthalate (PET) samples, gamma irradiated at different doses, was investigated by X-ray diffraction method before and after thermal treatment. Before the thermal treatment, the samples exposed to different doses of gamma radiations, does not show noticeable structural changes. However, the gamma exposure affects the thermal behavior of samples submitted to melting–cooling process. These modifications have been highlighted by X-ray diffraction, and confirmed also by thermal analysis and electron spin resonance spectroscopy.

scholarly journals Ellagic Acid May Improve Mechanical and Barrier Properties in Films of Starch-A Review Paper

2016 ◽  
Vol 5 (3) ◽  
pp. 61
Author(s):  
J. M. Tirado-Gallegos ◽  
D. R. Sepúlveda-Ahumada ◽  
P. B. Zamudio-Flores ◽  
M. L. Rodríguez-Marin ◽  
Francisco Hernández-Centeno ◽  
...  
Keyword(s):  
Ellagic Acid ◽  
Structural Changes ◽  
Antioxidant Properties ◽  
Barrier Properties ◽  
Packaging Materials ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Film Forming ◽  
Starch Films

<p>Packaging increases the shelf life of food and facilitates its handling, transportation and marketing. The main packaging materials are plastics derived from petroleum, but their accumulation has given rise to environmental problems. An alternative is the use of biodegradable materials. In this regard, starch is an excellent choice because it is an abundant and renewable source with film-forming properties. However, the films obtained from starch have some limitations with respect to their mechanical and barrier properties. Several strategies have been developed in order to improve these limitations, ranging from the addition of lipids to the modification of the polymer structure. The aim of this review was propose the use of ellagic acid as a cross-linking agent that may improves the mechanical and barrier properties in films based on exists reports that phenolic compounds interact with starch-based materials decreasing their rate of retrogradation. Furthermore, ellagic acid is a powerful natural antioxidant, which would allow the production of active packaging with antioxidant properties, in addition to the improvement of the mechanical and barrier properties of starch films. In this concern more studies such as Fourier transform infrared spectroscopy, X-ray diffraction, differential scanning calorimetry and thermogravimetric analysis are necessary to verify the structural changes and interactions between starch and ellagic acid. We expect extensive use of it in the future of packaging materials.</p>

scholarly journals Microstructure Evolution and Performance Improvement of Hypereutectic Al–Mg2Si Metallic Composite with Ca or Sb

Materials ◽  
2020 ◽  
Vol 13 (12) ◽  
pp. 2714
Author(s):  
Min Zuo ◽  
Boda Ren ◽  
Zihan Xia ◽  
Wenwen Ma ◽  
Yidan Lv ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Nucleation Behavior ◽  
X Ray ◽  
Primary Mg2si ◽  
Before And After ◽  
And Performance ◽  
Hardness Values

In this article, the modification effects on Al–Mg2Si before and after heat treatment were investigated with Ca, Sb, and (Ca + Sb). In comparison with single Ca or Sb, the samples with composition modifiers (Ca + Sb) had the optimal microstructure. The sample with a molar ratio for Ca-to-Sb of 1:1 obtained relatively higher properties, for which the Brinell hardness values before and after heat treatment were remarkably increased by 31.74% and 28.93% in comparison with bare alloy. According to differential scanning calorimetry analysis (DSC), it was found that the nucleation behavior of the primary Mg2Si phase could be significantly improved by using chemical modifiers. Some white particles were found to be embedded in the center of Mg2Si phases, which were deduced to be Ca5Sb3 through X-ray diffraction (XRD) and field-emission scanning electron microscope (FESEM) analyses. Furthermore, Ca5Sb3 articles possess a rather low mismatch degree with Mg2Si particles based on Phase Transformation Crystallography Lab software (PTCLab) calculation, meaning that the efficient nucleation capability of Ca5Sb3 for Mg2Si particles could be estimated.

scholarly journals Photocrystallography

2007 ◽  
Vol 64 (1) ◽  
pp. 259-271 ◽  
Author(s):  
Jacqueline M. Cole
Keyword(s):  
Structural Changes ◽  
Three Dimensional ◽  
Research Area ◽  
Active Species ◽  
X Ray Diffraction ◽  
X Ray ◽  
Future Possibility ◽  
New Research ◽  
Exciting Area

This review describes the development and application of a new crystallographic technique that is starting to enable the three-dimensional structural determination of molecules in their photo-activated states. So called `photocrystallography' has wide applicability, particularly in the currently exciting area of photonics, and a discussion of this applied potential is put into context in this article. Studies are classified into four groups: photo-structural changes that are (i) irreversible; (ii) long-lived but reversible under certain conditions; (iii) transient with photo-active lifetimes of the order of microseconds; (iv) very short lived, existing at the nanosecond or even picosecond level. As photo-structural changes relative to the `ground state' can be subtle, this article necessarily concentrates on small-molecule single-crystal X-ray diffraction given that high atomic resolution is possible. That said, where it is pertinent, references are also made to related major advances in photo-induced macromolecular crystallography. The review concludes with an outlook on this new research area, including the future possibility of studying even more ephemeral, femtosecond-lived, photo-active species.

Study of an Energetic-oxidant Co-crystal: Preparation, Characterisation, and Crystallisation Mechanism

2017 ◽  
Vol 67 (5) ◽  
pp. 510 ◽  
Author(s):  
Han Gao ◽  
Wei Jiang ◽  
Jie Liu ◽  
Gazi Hao ◽  
Lei Xiao ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Differential Scanning Calorimetry ◽  
Diffraction Spectrum ◽  
Solvent Evaporation Method ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Scanning Electron

<p>An energetic co-crystal consisting of the most promising military explosive 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (CL-20) and the most well-known oxidant applied in propellants ammonium perchlorate has been prepared with a simple solvent evaporation method. Scanning electron microscopy revealed that the morphology of co-crystal differs greatly from each component. The X-ray diffraction spectrum, FTIR, Raman spectra, and differential scanning calorimetry characterisation further prove the formation of the co-crystal. The result of determination of hygroscopic rate indicated the hygroscopicity was effectively reduced. At last, the crystallisation mechanism has been discussed.</p>

Multiple dielectric anomalies in xBiLaO3–(1 − x)PbTiO3 piezoelectrics

2008 ◽  
Vol 23 (2) ◽  
pp. 565-569 ◽  
Author(s):  
Runrun Duan ◽  
Michael S. Haluska ◽  
Robert F. Speyer
Keyword(s):  
Differential Scanning Calorimetry ◽  
Dielectric Constant ◽  
Excellent Agreement ◽  
Structural Changes ◽  
Dielectric Anomaly ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Thermally Induced ◽  
X Ray ◽  
Higher Temperature

Compositions of xBiLaO3–(1 − x) PbTiO3 over the range 0 ≤ x ≤ 0.225 were calcined and sintered. The dielectric constant with temperature and differential scanning calorimetry measurements were in excellent agreement with respect to Curie-like tetragonal to cubic transformations starting at 495 °C for pure PbTiO3, shifting to lower temperatures with increasing x. For compositions of x ≥ 0.05, a second higher-temperature (∼600 °C) endotherm, and matching dielectric anomaly, were consistently observed, for which there were no structural changes indicated by hot-stage x-ray diffraction. This transformation was speculated to be based on a thermally induced desegregation of B-site cations.

Sign in / Sign up

Export Citation Format

Share Document