Study of Defects Structure in Fe-Al Alloys

2013 ◽  
Vol 203-204 ◽  
pp. 411-416
Author(s):  
Ewelina Bernstock-Kopaczyńska ◽  
Magdalena Jabłońska
Keyword(s):  
Low Temperature ◽  
Great Influence ◽  
Linear Structure ◽  
High Energy ◽  
Al Alloys ◽  
Dislocation Loops ◽  
Structure Defects ◽  
Low Temperature Annealing ◽  
Mechanical And Physical Properties ◽  
Long Range Ordering

In the literature it is proven that thermal vacancies have a great influence on the mechanism of hardening of Fe-Al alloys. Moreover, in these alloys, we observed a long-range ordering, which can significantly affect the mechanical and physical properties and their stability. In this paper, influence of low-temperature annealing on elimination of excess vacancies was investigated. TEM observation of annealed specimens for the alloys with 28 and 38 at.% aluminum have helped elucidate the phenomena responsible for vacancies elimination due to the occurrence of particular interactions between point and linear structure defects. It was shown that the aluminum content influences significantly changes in defects structure. The alloy with 28 at.% aluminum has mainly superdislocations in the structure, while in alloy with 38 at.% aluminum, mainly unit dislocations and high-energy dislocation configurations, like dislocation loops, dislocation dipoles, and dislocation jogs, were observed. The results suggest that different defect types may control the diffusion process during low-temperature annealing and that it is affected by alloy composition.

Low Temperature Annealing of Rh (111) Surfaces

1996 ◽  
Vol 440 ◽  
Author(s):  
Frank Tsui ◽  
Joanne Wellman ◽  
Junhao Xu ◽  
Ctirad Uher ◽  
Roy Clarke
Keyword(s):  
Low Temperature ◽  
Temperature Stability ◽  
High Energy ◽  
Scanning Tunneling ◽  
Initial Surface ◽  
Tunneling Microscopy ◽  
Homoepitaxial Growth ◽  
Low Temperature Annealing ◽  
Kinetics Of

AbstractWe have studied smoothing kinetics of Rh (111) surfaces during low temperature annealing using in-situ real-time reflection high energy electron diffraction and scanning tunneling microscopy. The initial surface features were produced by low temperature homoepitaxial growth of Rh (111). Two types of surfaces were studied, surfaces with two-dimensional (2D) islands at submonolayer coverages, and those with 3D multilayered features. 2D islands coarsen rapidly at the onset of the anneal. 3D features are more stable initially. Their annealing process exhibits a distinct transition from an initial slow coarsening, characterized by a nearly linear growth of lateral size, to a rapid flattening. The activation energy for the transition is ˜ 0.6 eV. The observed behavior indicates that the smoothing kinetics in the low temperature regime is limited by adatom detachment from the step-edges, and that the fast process for the 3D features is made possible by the formation of a network of “chain-like” structures which provide new pathways for diffusion thus overcoming the slow detachment kinetics. These effects determine the low temperature stability of the non-equilibrium epitaxial morphologies.

Low-temperature annealing of YBa2Cu3O7-x

1992 ◽  
Vol 50 (1) ◽  
pp. 88-89
Author(s):  
R.L. Sabatini ◽  
Yimei Zhu ◽  
Masaki Suenaga ◽  
A.R. Moodenbaugh
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Low Temperature ◽  
Oxygen Diffusion ◽  
Diffusion Rate ◽  
Oxygen Depletion ◽  
Low Temperature Annealing ◽  
Transmission Electron ◽  
Microstructural Effects ◽  
Oxygen Diffusion Rate

Low temperature annealing (<400°C) of YBa2Cu3O7x in a ozone containing oxygen atmosphere is sometimes carried out to oxygenate oxygen deficient thin films. Also, this technique can be used to fully oxygenate thinned TEM specimens when oxygen depletion in thin regions is suspected. However, the effects on the microstructure nor the extent of oxygenation of specimens has not been documented for specimens exposed to an ozone atmosphere. A particular concern is the fact that the ozone gas is so reactive and the oxygen diffusion rate at these temperatures is so slow that it may damage the specimen by an over-reaction. Thus we report here the results of an investigation on the microstructural effects of exposing a thinned YBa2Cu3O7-x specimen in an ozone atmosphere using transmission electron microscopy and energy loss spectroscopy techniques.

The promises and perfidy of cryomicroscopy and analysis

1994 ◽  
Vol 52 ◽  
pp. 382-383
Author(s):  
Patrick Echlin
Keyword(s):  
Low Temperature ◽  
High Energy ◽  
Short Paper ◽  
List Type ◽  
Time Resolved ◽  
Energy Beam ◽  
Cellular Analysis ◽  
Dissolved Ions ◽  
Embedding Medium ◽  
Low Temperature Microscopy

The unusual title of this short paper and its accompanying tutorial is deliberate, because the intent is to investigate the effectiveness of low temperature microscopy and analysis as one of the more significant elements of the less interventionist procedures we can use to prepare, examine and analyse hydrated and organic materials in high energy beam instruments. The promises offered by all these procedures are well rehearsed and the litany of petitions and responses may be enunciated in the following mantra.Vitrified water can form the perfect embedding medium for bio-organic samples.Frozen samples provide an important, but not exclusive, milieu for the in situ sub-cellular analysis of the dissolved ions and electrolytes whose activities are central to living processes.The rapid conversion of liquids to solids provides a means of arresting dynamic processes and permits resolution of the time resolved interactions between water and suspended and dissolved materials.The low temperature environment necessary for cryomicroscopy and analysis, diminish, but alas do not prevent, the deleterious side effects of ionizing radiation.Sample contamination is virtually eliminated.

scholarly journals Low-Temperature Mineralisation of Titania-Siloxane Composite Layers

Catalysts ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 50
Author(s):  
Tomáš Svoboda ◽  
Michal Veselý ◽  
Radim Bartoš ◽  
Tomáš Homola ◽  
Petr Dzik
Keyword(s):  
Low Temperature ◽  
Great Influence ◽  
Gel Permeation Chromatography ◽  
Photocatalytic Decomposition ◽  
Acid Orange 7 ◽  
Composite Layers ◽  
Nonthermal Treatment ◽  
Plasma Methods ◽  
Voltammetric Measurements ◽  
Thermally Treated

This paper deals with low-temperature mineralisation of coatings made with titania-siloxane compositions (TSC). Methyltriethoxysilane has been adopted as the precursor for the siloxane, and during its synthesis, an oligomeric siloxane condensate with methyl moieties acting as TiO2 binder has been produced. These methyl moieties, contained in TSC, provide solubility and prevent gelling, but reduce the hydrophilicity of the system, reduce the transfer of electrons and holes generated in the TiO2. In order to avoid these unfavourable effects, TSC mineralisation can be achieved by nonthermal treatment, for example, by using UV-radiation or plasma treatment. Characterisation of the siloxane was performed by gel permeation chromatography (GPC), which showed the size of the siloxane chain. Thermogravimetric analysis revealed a temperature at which the siloxane mineralises to SiO2. Printed layers of two types of TSC with different siloxane contents were studied by a scanning electron microscope (SEM), where a difference in the porosity of the samples was observed. TSC on fluorine-doped tin oxide (FTO) coated glass and microscopic glass were treated with non-thermal UV and plasma methods. TSC on FTO glass were tested by voltammetric measurements, which showed that the non-thermally treated layers have better properties and the amount of siloxane in the TSC has a great influence on their efficiency. Samples on microscopic glass were subjected to a photocatalytic decomposition test of the model pollutant Acid orange 7 (AO7). Non-thermally treated samples show higher photocatalytic activity than the raw sample.

scholarly journals Effects of equal channel angular pressing and heat treatments on the microstructures and mechanical properties of selective laser melted and cast AlSi10Mg alloys

2021 ◽  
Vol 21 (3) ◽  
Author(s):  
Przemysław Snopiński ◽  
Mariusz Król ◽  
Marek Pagáč ◽  
Jana Petrů ◽  
Jiří Hajnyš ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Low Temperature ◽  
Equal Channel Angular Pressing ◽  
Heat Treatments ◽  
Electron Backscattered Diffraction ◽  
Angular Pressing ◽  
Low Temperature Annealing ◽  
Transmission Electron ◽  
Before And After ◽  
The Impact

AbstractThis study investigated the impact of the equal channel angular pressing (ECAP) combined with heat treatments on the microstructure and mechanical properties of AlSi10Mg alloys fabricated via selective laser melting (SLM) and gravity casting. Special attention was directed towards determining the effect of post-fabrication heat treatments on the microstructural evolution of AlSi10Mg alloy fabricated using two different routes. Three initial alloy conditions were considered prior to ECAP deformation: (1) as-cast in solution treated (T4) condition, (2) SLM in T4 condition, (3) SLM subjected to low-temperature annealing. Light microscopy, transmission electron microscopy, X-ray diffraction line broadening analysis, and electron backscattered diffraction analysis were used to characterize the microstructures before and after ECAP. The results indicated that SLM followed by low-temperature annealing led to superior mechanical properties, relative to the two other conditions. Microscopic analyses revealed that the partial-cellular structure contributed to strong work hardening. This behavior enhanced the material’s strength because of the enhanced accumulation of geometrically necessary dislocations during ECAP deformation.

Sign in / Sign up

Export Citation Format

Share Document