Low Loss LTCC Ag System for 5G Applications

2021 ◽  
Vol 2021 (HiTEC) ◽  
pp. 000105-000111
Author(s):  
Ellen Tormey ◽  
Chao Ma ◽  
John Maloney ◽  
Bradford Smith ◽  
Sid Sridharan ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
High Frequency ◽  
Lower Cost ◽  
Low Dielectric Constant ◽  
Low Latency ◽  
Frequency Range ◽  
Low Loss ◽  
Green Tape ◽  
Low Dielectric ◽  
Wireless Telecommunications

Abstract Low dielectric constant/low loss LTCC materials have drawn much attention with the emergence of 5G wireless telecommunications. LTCC offers unique properties in the millimeter wave frequency range. The low dielectric constant and dielectric loss enable low latency devices with enhanced performance. To meet the market demands of higher performance and lower cost, Ferro has developed a new M7 LTCC/Ag cofireable system suitable for antenna in 5G and other high frequency applications. M7 LTCC ceramic green tape and cofireable Ag conductors have been developed and tested. Properties of the LTCC/Ag system are included herein including high frequency dielectric properties.

Photosensitive Polyimide having low loss tangent for RF application

2018 ◽  
Vol 2018 (1) ◽  
pp. 000476-000482 ◽  
Author(s):  
Masao Tomikawa ◽  
Hitoshi Araki ◽  
Yohei Kiuchi ◽  
Akira Shimada
Keyword(s):  
Molecular Structure ◽  
Dielectric Constant ◽  
Dielectric Properties ◽  
Dielectric Loss ◽  
High Frequency ◽  
Low Dielectric Constant ◽  
Low Loss ◽  
Elongation At Break ◽  
Low Dielectric ◽  
The Poor

Abstract Progress of 5G telecommunication and mm radar for autopilot, high frequency operation is required. Insulator materials having low loss at high frequency is desired for the applications. We designed the low dielectric constant, and low dielectric loss materials examined molecular structure of the polyimide and found that permittivity 2.6 at 20GHz, dielectric loss 0.002. Furthermore, in consideration of mechanical properties such as the toughness and adhesion to copper from a point of practical use. Dielectric properties largely turned worse when giving photosensitivity. To overcome the poor dielectric properties, we designed the photosensitive system. After all, we successfully obtained 3.5 of dielectric constant and 0.004 of dielectric loss, and 100% of elongation at break. In addition, we offered a B stage sheet as well as varnish. These materials are applicable to re-distribution layer of FO-WLP, Interposer and other RF applications for microelectronics.

Camber development during cofiring Ag-based low-dielectric-constant ceramic package

1997 ◽  
Vol 12 (10) ◽  
pp. 2743-2750 ◽  
Author(s):  
Jau-Ho Jean ◽  
Chia-Ruey Chang
Keyword(s):  
Dielectric Constant ◽  
Low Temperature ◽  
Layered Structure ◽  
Mathematical Analysis ◽  
Low Dielectric Constant ◽  
Green Tape ◽  
Root Cause ◽  
Low Dielectric ◽  
Ag Film ◽  
Good Agreement

Camber (curvature) development during cofiring a two-layered structure of Ag film/low-dielectric-constant, low-temperature cofired ceramic (LTCC) green tape has been investigated. At a given thickness of Ag film, both the camber and camber rate decrease linearly with increasing the square thickness of LTCC. Densification mismatch between Ag and LTCC is attributed to be the root cause for the camber generation during cofiring. Mathematical analysis is made to theoretically describe the camber development, and the results show a fairly good agreement with experimental observations.

Dielectric Properties of MgAl2O4 Transparent Nano-Ceramic

2008 ◽  
Vol 368-372 ◽  
pp. 412-413 ◽  
Author(s):  
Jie Zhang ◽  
Deng Xue Wu ◽  
Xiang Hui Chang ◽  
Tie Cheng Lu ◽  
Yi Hang Jiang ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
Dielectric Properties ◽  
Low Dielectric Constant ◽  
Frequency Range ◽  
Low Dielectric

Dielectric constant and dielectric dissipation of MgAl2O4 transparent nano-ceramics were measured at different frequencies. The results indicated that the transparent nano-ceramic has a very low dielectric constant and low dielectric dissipation in frequency range of 1K~9MHz, but the dissipation of is independent of frequency. The dielectric constant of the transparent nano-ceramic does not vary signifycantly with temperature.

Cross-Linkable Fluorinated Polynorbornene with High Thermostability and Low Dielectric Constant at High Frequency

2019 ◽  
Vol 2 (2) ◽  
pp. 768-774 ◽  
Author(s):  
Xingrong Chen ◽  
Jing Sun ◽  
Linxuan Fang ◽  
Yangqing Tao ◽  
Xiaoyao Chen ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
High Frequency ◽  
Low Dielectric Constant ◽  
High Thermostability ◽  
Low Dielectric

scholarly journals Realization of trophy shaped flexible wearable antenna based on foam substrate

2018 ◽  
Vol 7 (2.12) ◽  
pp. 222
Author(s):  
Reema Dubey ◽  
Vinod Kumar Singh ◽  
Akash Kumar Bhoi ◽  
Zakir Ali
Keyword(s):  
Dielectric Constant ◽  
Reflection Coefficient ◽  
Loss Tangent ◽  
Low Dielectric Constant ◽  
Polystyrene Foam ◽  
Low Loss ◽  
Wearable Antenna ◽  
Low Dielectric ◽  
Large Bandwidth ◽  
Flexible Antenna

The endeavor of this paper is to analyze a light weighted flexible antenna for modern communication system. There are three different patch designs with operating frequency 4GHz. These proposed antennas are compact in size, shows high directivity and large bandwidth. Ex-pandable polystyrene foam is used as a substrate because such antenna are bendable, wearable, cheap, require less attention and having good features like low dielectric constant, low loss tangent and better efficiency. The antenna parameters like reflection coefficient, gain, band-width, radiation pattern are analyzed. The reflection coefficient of anticipated antenna provides a good concurrence between simulated and measured result. Foam based design is simulated by using CST studio. 

An effective strategy for the preparation of intrinsic low-k and ultralow-loss dielectric polysiloxanes at high frequency by introducing trifluoromethyl groups into the polymers

2020 ◽  
Vol 11 (38) ◽  
pp. 6163-6170
Author(s):  
Fengping Liu ◽  
Xingrong Chen ◽  
Linxuan Fang ◽  
Jing Sun ◽  
Qiang Fang
Keyword(s):  
Dielectric Constant ◽  
Dielectric Properties ◽  
Dielectric Loss ◽  
High Frequency ◽  
Low Dielectric Constant ◽  
Effective Strategy ◽  
Low Dielectric ◽  
5 Ghz ◽  
Low K ◽  
Trifluoromethyl Groups

Two new CF3-containing polysiloxanes with low dielectric constant (Dk) and dielectric loss (Df ) at a high frequency of 5 GHz were reported. The sample with two −CF3 groups exhibits better dielectric properties with Dk of 2.53 and ultralow Df of 1.66 × 10−3.

Dielectric Properties of Na2O Doped Cao-B2O3-SiO2 System Glass-Ceramics

2013 ◽  
Vol 750-752 ◽  
pp. 492-496
Author(s):  
Peng Fei Wei
Keyword(s):  
Dielectric Constant ◽  
Dielectric Properties ◽  
Dielectric Loss ◽  
Sintering Temperature ◽  
Glass Ceramics ◽  
Wide Frequency Range ◽  
Microwave Properties ◽  
Low Dielectric Constant ◽  
Frequency Range ◽  
Low Dielectric

The behavior of dielectric and microwave properties against sintering temperature was been carried out on CaO-B2O3-SiO2glass-ceramics with Na2O addition by XRD and SEM. The results show that 0.5 wt.% Na2O addition is advantageous to improve the dielectric and microwave properties due to increasing the major crystalline CaSiO3. With further increasing Na2O content, α-SiO2is the predominant crystalline phase instead of CaSiO3. The CBS glass-ceramics with 0.5 wt.% Na2O sintered at 875°C has a bulk density of 2.51g·cm-3, and which possesses good dielectric properties:εr=6.2,tanδ=1.9×10-3(10 MHz) and low dielectric constant below 2×10-3over a wide frequency range. The proposed dielectrics can find applications in microwave devices, which require low dielectric loss and low dielectric constant.

Sign in / Sign up

Export Citation Format

Share Document