scholarly journals Effect of Freeze-Grinding and Drying Process on the Quality of Fish Oil Extracted from Fish Bone of Yellow-fin Tuna and Bonito.

2002 ◽  
Vol 39 (6) ◽  
pp. 454-458 ◽  
Author(s):  
Yoshio Hagura ◽  
Takahiro Shuto ◽  
Makiko Okada ◽  
Kanichi Suzuki
Keyword(s):  
Fish Oil ◽  
Fish Bone ◽  
Drying Process

scholarly journals PERBEDAAN SUHU PENGOLAHAN DENGAN METODE STEAM JACKETED SEDERHANA TERHADAP MUTU MINYAK DARI LIMBAH KEPALA IKAN MACKEREL Different Processing Temperatures of Simple Steam Jacketed Method toward Quality of Crude Fish Oil from Head Wasteof Mackerel

2016 ◽  
Vol 11 (2) ◽  
pp. 78
Author(s):  
Rukmana Rahayu Lestari ◽  
Ratna Ibrahim ◽  
Putut Har Riyadi
Keyword(s):  
Fatty Acid ◽  
Free Fatty Acid ◽  
Fish Oil ◽  
Iodine Value ◽  
Peroxide Value ◽  
Acid Value ◽  
Omega 3 ◽  
Oil Processing ◽  
Omega 6

ABSTRAK   Proses pengolahan minyak ikan kasar dengan metode steam jacketed di salah satu perusahaan pengolahan hasil perikanan menggunakan bahan baku campuran limbah padat pengalengan ikan Mackerel dengan suhu yang tinggi 90-100 °C menghasilkan produk yang belum memenuhi persyaratan mutu minyak ikan secara nasional. Penelitian ini bertujuan untuk mengetahui pengaruh perbedaan suhu pengolahan minyak ikan kasar ≤ 85 °C dari kepala ikan Mackerel tanpa insang dengan metode steam jacketed sederhana terhadap mutu produknya serta untuk mengetahui suhu dan lama waktu pengolahan yang menghasilkan minyak ikan kasar yang memenuhi persyaratan mutu secara nasional maupun internasional. Materi penelitian berupa kepala ikan Mackerel tanpa insang. Penelitian dilakukan dengan metode eksperimental laboratoris. Percobaan dirancang dengan Rancangan Percobaan Kelompok dengan perlakuan suhu berbeda (85 °C, 75 °C, dan 65 °C). Masing-masing perlakuan diulang tiga kali. Variabel mutu yang diamati adalah asam lemak bebas, bilangan peroksida, bilangan iod, kadar air, rendemen dan nilai sensori, serta uji profil asam lemak untuk produk yang terbaik. Data dianalisis menggunakan ANOVA dan perbedaan diantara perlakuan diuji dengan Uji Tukey. Hasil penelitian menunjukkan bahwa perbedaan suhu pengolahan minyak ikan kasar dari kepala ikan Mackerel tanpa insang dengan metode steam jacketed sederhana memberikan pengaruh berbeda nyata terhadap nilai asam lemak bebas, bilangan peroksida, bilangan iod, dan rendemen, tetapi tidak menyebabkan perbedaan nyata terhadap nilai sensori. Mutu produk terbaik yaitu produk yang diolah pada suhu 65 °C selama 20 menit, produk tersebut mengandung asam lemak omega-3 dan omega-6.   Kata kunci: Kepala ikan Mackerel, Minyak ikan kasar, Steam jacketed sederhana     ABSTRACT  The process of crude fish oil processing using the steam jacketed method in a fish product processing company which uses the raw material of solid mixed waste of canned Mackerel at 90-100 °C result in the products which have not fulfilled the requirement of national fish oil quality. The purpose of this research is to figure out the effect of processing temperature difference in the processing of crude fish oil below or at 85 °C from gill-less Mackerel fish head using the simple steam jacketed method on the quality of the processing products. This research is also intended to figure out the temperature and duration for the processing which produces the crude fish oil to fulfill both national and international quality standard.The research materials were gill-less Mackerel fish heads. The research was conducted using laboratory experimental method. The experiments were designed into Randomized Block Design with difference temperatures (85 °C, 75 °C, and 65 °C). Each of the temperature treatments was made in triplicate. The quality variables to be observed were free fatty acid value, peroxide value, iodine value, moisture content, yield and sensory value. The quality variables which made the best treatment was then tested using the fatty acid profile test for the best crude fish oil product. The data obtained were analyzed using ANOVA, and the difference among the treatments were tested using HSD test.The research result showed that the temperature difference in crude fish oil processing from gill-less Mackerel fish heads using the simple steam jacketed method gave significantly different effect on free fatty acid value, peroxide value, iodine value, and yield. However, did not give significantly different effect on sensory value. The best product quality was obtained from the product which was processed at 65 °C for 20 minutes, the product contains fatty acid omega-3 and omega-6. Keywords: Crude fish oil, Mackerel fish head, Simple steam jacketed method

scholarly journals Freeze-drying microscopy in mathematical modeling of a biomaterial freeze-drying

2012 ◽  
Vol 48 (2) ◽  
pp. 203-209 ◽  
Author(s):  
Camila Figueiredo Borgognoni ◽  
Joyce da Silva Bevilacqua ◽  
Ronaldo Nogueira de Moraes Pitombo
Keyword(s):  
Mathematical Modeling ◽  
Freeze Drying ◽  
Drying Process ◽  
Critical Temperatures ◽  
Fundamental Properties ◽  
Moving Interface ◽  
Energy Consuming ◽  
Sublimation Rates ◽  
Time And Energy

Transplantation brings hope for many patients. A multidisciplinary approach on this field aims at creating biologically functional tissues to be used as implants and prostheses. The freeze-drying process allows the fundamental properties of these materials to be preserved, making future manipulation and storage easier. Optimizing a freeze-drying cycle is of great importance since it aims at reducing process costs while increasing product quality of this time-and-energy-consuming process. Mathematical modeling comes as a tool to help a better understanding of the process variables behavior and consequently it helps optimization studies. Freeze-drying microscopy is a technique usually applied to determine critical temperatures of liquid formulations. It has been used in this work to determine the sublimation rates of a biological tissue freeze-drying. The sublimation rates were measured from the speed of the moving interface between the dried and the frozen layer under 21.33, 42.66 and 63.99 Pa. The studied variables were used in a theoretical model to simulate various temperature profiles of the freeze-drying process. Good agreement between the experimental and the simulated results was found.

scholarly journals An Exploratory Analysis of Changes in Mental Wellbeing Following Curcumin and Fish Oil Supplementation in Middle-Aged and Older Adults

Nutrients ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2902
Author(s):  
Julia C. Kuszewski ◽  
Peter R. C. Howe ◽  
Rachel H. X. Wong
Keyword(s):  
Older Adults ◽  
Fish Oil ◽  
Mood States ◽  
Exploratory Analysis ◽  
Mental Wellbeing ◽  
Subjective Memory ◽  
Double Blind ◽  
Fish Oil Supplementation ◽  
Plasma Apolipoprotein

Curcumin has previously been shown to enhance mood in non-depressed older adults. However, observed benefits were limited to short-term supplementation (4 weeks). In a 16 week randomized, double-blind, placebo-controlled, 2 × 2 factorial design trial, we supplemented overweight or obese non-depressed adults (50–80 years) with curcumin (160 mg/day), fish oil (2000 mg docosahexaenoic acid +400 mg eicosapentaenoic acid/day), or a combination of both. Secondary outcomes included mental wellbeing measures (mood states and subjective memory complaints (SMCs)) and quality of life (QoL). Furthermore, plasma apolipoprotein E4 (APOE4) was measured to determine whether APOE4 status influences responses to fish oil. Curcumin improved vigour (p = 0.044) compared to placebo and reduced SMCs compared to no curcumin treatment (p = 0.038). Fish oil did not affect any mood states, SMCs or QoL; however, responses to fish oil were affected by APOE4 status. In APOE4 non-carriers, fish oil increased vigour (p = 0.030) and reduced total mood disturbances (p = 0.048) compared to placebo. Improvements in mental wellbeing were correlated with increased QoL. Combining curcumin with fish oil did not result in additive effects. This exploratory analysis indicates that regular supplementation with either curcumin or fish oil (limited to APOE4 non-carriers) has the potential to improve some aspects of mental wellbeing in association with better QoL.

scholarly journals Physiological quality of habanero pepper (Capisicum chinense) seeds based on development and drying process

2016 ◽  
Vol 11 (12) ◽  
pp. 1102-1109 ◽  
Author(s):  
Oliveira dos Santos Heloisa ◽  
Mangussi Franchi Dutra Sophia ◽  
Walace Pereira Rucyan ◽  
Maria De Oliveira Pires Raquel ◽  
Vilela De Resende Von Pinho Eacute dila ◽  
...  
Keyword(s):  
Drying Process ◽  
Habanero Pepper ◽  
Physiological Quality

Thermal Effect of the Spray Drying Process on the Quality of Tongkat Ali Extract

2016 ◽  
Vol 1133 ◽  
pp. 612-616
Author(s):  
Harun Noor Hafiza ◽  
Abdul Aziz Azila ◽  
Wan Zamri Wan Mastura ◽  
Yaakob Harisun ◽  
Aziz Ramlan
Keyword(s):  
Spray Drying ◽  
Operating Conditions ◽  
Optimum Operating ◽  
Powder Size ◽  
Drying Process ◽  
Process Yield ◽  
Box Behnken Design ◽  
Air Inlet ◽  
Process Use

The effect of heat on the quality of spray dried Tongkat Ali extract was investigated at three different air inlet temperatures (100°C, 180°C and 2200C). Response surface methodology employing the Box-Behnken Design was employed to hunt for the optimum operating conditions at these temperatures. Good retentions of eurycomanone, total polysaccharides and glycosaponins were exhibited during the spray drying process. However, protein was found to be susceptible to thermal degradation during the spray drying process. Use of high air inlet temperatures (i.e. 1800C and 2200C) in spray drying led to greater process yield, lower moisture contents, produced non-sticky particles, and resulted in good powder size distribution of Tongkat Ali extract compared to spray drying at 1000C.

Impact of condensation degree of melamine-formaldehyde resins on their curing behavior and on the final properties of high-pressure laminates

2020 ◽  
pp. 095440622094033 ◽  
Author(s):  
J Santos ◽  
J Pereira ◽  
N Paiva ◽  
J Ferra ◽  
FD Magalhães ◽  
...  
Keyword(s):  
High Pressure ◽  
Mechanical Analysis ◽  
Total Reflection ◽  
Attenuated Total Reflection ◽  
Drying Process ◽  
Reflection Spectroscopy ◽  
Melamine Formaldehyde ◽  
High Pressure And Temperature ◽  
Pot Life

Melamine-formaldehyde is the most common resin used in the production of high-pressure laminates and low-pressure laminates (melamine impregnated paper), due to its properties of durability, good fire, and heat resistance and good moisture resistance. High-pressure laminate is a common choice for horizontal and vertical applications in the construction and furniture industries, thanks to its durability and versatility. The manufacture of such laminates commonly starts with the impregnation of decorative and kraft papers with thermosetting resins and after a drying process, the impregnated paper sheets are bonded together by high pressure and temperature pressing. The aim of this work was to evaluate the influence of the melamine-formaldehyde resins condensation degree after synthesis on high-pressure laminates performance. For that purpose, melamine-formaldehyde resins with different condensation degree were synthetized and characterized. Fourier-transform infrared–attenuated total reflection spectroscopy and dynamic mechanical analysis were used to study the chemical and mechanical cure of melamine-formaldehyde resins. Melamine-formaldehyde condensation degree has shown to have influence on resin pot-life, on characteristic reaction temperatures, on the degree of cross-linking achieved, and finally on the surface quality of high-pressure laminates.

Sign in / Sign up

Export Citation Format

Share Document