scholarly journals Production and characterization of biodiesel from mango seed oil (MSO)

2021 ◽  
Vol 40 (4) ◽  
pp. 598-607
Author(s):  
P.A. Okonkwo ◽  
I. Omenihu
Keyword(s):  
Diesel Engine ◽  
Seed Oil ◽  
Mangifera Indica ◽  
Engine Performance ◽  
Working Fluid ◽  
Fuel Additive ◽  
Ic Engine ◽  
Production And Consumption ◽  
Mango Seed ◽  
Astm D6751

Biodiesel in the past, was once considered a fringe fuel. However today, the production and consumption of this fuel has grown as a sustainable and much more eco-friendly alternative to the Conventional diesel (Petroleum diesel), for diesel engines; if not in pure form, it will be in blends of different ratios, or as a fuel additive, to improve engine performance and ensure longevity. In this research, oil from Mango (Mangifera indica) seed was extracted through Soxhlet solvent process, and converted into biodiesel by the method of Transesterification. This process involved the reaction between the extracted oil and methanol at an optimal temperature of 60°C, and 1%w/v of the catalyst (KOH) concentration for optimal yield of biodiesel. The produced biodiesel was analyzed and evaluated by comparing its physical characteristics to that of Conventional (petroleum) diesel fuel. The properties analyzed were; Density, Heating value, flash point, specific gravity, viscosity, cloud point, water content and pour point. The biodiesel from mango seed oil (MSO) compared excellently well with the values obtained for the commercially available petroleum diesel, dispensed at government approved filling stations in Nigeria. The biodiesel so produced and characterized, was subsequently subjected to an engine test, in a four-stroke internal compression (IC), (diesel) engine loaded between 120 – 200 rpm, to determine its suitability as a fuel. The result was compared with the Conventional diesel characteristics in terms of brake power output, mass flow rate, thermal efficiency, and specific fuel consumption (SFC) and so on. The biodiesel results compared very well with most of the data generated on the conventional diesel, and satisfied the ASTM-D6751 and the EN14214 standard requirements for suitability as working fluid in an IC engine, especially with regard to SFC, which translates to the direct running cost of every diesel engine.

scholarly journals DIESEL ENGINE PERFORMANCE, EMISSION AND COMBUSTION CHARACTERISTICS WITH OPTIMIZED BLEND OF B25 METHYL ESTER OF MANGO SEED OIL

2020 ◽  
Author(s):  
K. Vijayaraj ◽  
A. Muruga Ganesan ◽  
C.G. Saravanan
Keyword(s):  
Diesel Engine ◽  
Methyl Ester ◽  
Vegetable Oils ◽  
Alternative Fuels ◽  
Seed Oil ◽  
Engine Performance ◽  
High Viscosity ◽  
Combustion Characteristics ◽  
Biodiesel Blends ◽  
Mango Seed

Oil based fuels worldwide have not just brought about the speedy consumption of available energy sources, yet have likewise caused extreme air pollution. The quests for a substitute fuel has prompted numerous findings because of which wide assortment of alternative fuels are available now. The current investigations have revealed the utilization of vegetable oils for engines as an option for diesel fuel. Since there is a restriction in using vegetable oils in diesel engines because of their high viscosity and low volatility. In the current work, mango seed oil is converted into respective methyl ester by transesterification process. Tests are conducted using different blends of methyl ester of mango seed oil with diesel in a diesel engine. The investigation consequences demonstrated that the MEMSO biodiesel has comparable qualities to that of diesel. The brake thermal efficiency and smoke are seen to be lower in case of MEMSO biodiesel blends than diesel. Then again, BSFC and NOx of MEMSO biodiesel blends are seen as higher than diesel. It is observed that the combustion characteristics of methyl ester of mango seed oil blends seem to be similar with that of the diesel. From this investigation, it is concluded that B25 as optimized blend and could be used as an alternative fuel in a diesel engine with no engine modifications

scholarly journals A Review on the Thermochemical Recycling of Waste Tyres to Oil for Automobile Engine Application

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3837
Author(s):  
Mohammad I. Jahirul ◽  
Farhad M. Hossain ◽  
Mohammad G. Rasul ◽  
Ashfaque Ahmed Chowdhury
Keyword(s):  
Diesel Engine ◽  
Engine Performance ◽  
Calorific Value ◽  
High Viscosity ◽  
Combustion Efficiency ◽  
Fuel Additive ◽  
Pyrolysis Oil ◽  
Performance And Emission ◽  
Automobile Engines ◽  
Direct Use

Utilising pyrolysis as a waste tyre processing technology has various economic and social advantages, along with the fact that it is an effective conversion method. Despite extensive research and a notable likelihood of success, this technology has not yet seen implementation in industrial and commercial settings. In this review, over 100 recent publications are reviewed and summarised to give attention to the current state of global tyre waste management, pyrolysis technology, and plastic waste conversion into liquid fuel. The study also investigated the suitability of pyrolysis oil for use in diesel engines and provided the results on diesel engine performance and emission characteristics. Most studies show that discarded tyres can yield 40–60% liquid oil with a calorific value of more than 40 MJ/kg, indicating that they are appropriate for direct use as boiler and furnace fuel. It has a low cetane index, as well as high viscosity, density, and aromatic content. According to diesel engine performance and emission studies, the power output and combustion efficiency of tyre pyrolysis oil are equivalent to diesel fuel, but engine emissions (NOX, CO, CO, SOX, and HC) are significantly greater in most circumstances. These findings indicate that tyre pyrolysis oil is not suitable for direct use in commercial automobile engines, but it can be utilised as a fuel additive or combined with other fuels.

Tribological and emission characteristics of indirect ignition diesel engine fuelled with waste edible oil

2016 ◽  
Vol 68 (5) ◽  
pp. 554-560 ◽  
Author(s):  
De-Xing Peng
Keyword(s):  
Economic Growth ◽  
Diesel Engine ◽  
Diesel Fuel ◽  
Fossil Fuels ◽  
Fuel Injection ◽  
Engine Performance ◽  
Vital Role ◽  
Fuel Additive ◽  
Content Type ◽  
Lubricating Property

Purpose Energy is the prime mover of economic growth and is vital to the sustenance of a modern economy. Future economic growth depends heavily on the long-term availability of energy from sources that are affordable, accessible and environmentally friendly. Regulating the sulfur content in diesel fuel is expected to reduce the lubricity of these fuels, which may result in increased wear and damage of fuel injection systems in diesel engines. Design/methodology/approach The tribological properties of the biodiesels as additive in pure petro-diesel are studied by ball-on-ring wear tester to find optimal concentration, and the mechanism of the reduction of wear and friction will be investigated by optical microscopy. Findings Studies have shown that low concentrations of biodiesel blends are more effective as lubricants because of their superior polarity. Using biodiesel as a fuel additive in a pure petroleum diesel fuel improves engine performance and exhaust emissions. The high biodegradability and superior lubricating property of biodiesel when used in compression ignition engines renders it an excellent fuel. Originality/value This detailed experimental investigation confirms that biodiesel can substitute mineral diesel without any modification in the engine. The use of biofuels as diesel engine fuels can play a vital role in helping the developed and developing countries to reduce the environmental impact of fossil fuels.

scholarly journals THE EFFECT OF FUEL ADDITIVE SO‐2E ON DIESEL ENGINE PERFORMANCE WHEN OPERATING ON DIESEL FUEL AND SHALE OIL

Transport ◽  
2006 ◽  
Vol 21 (2) ◽  
pp. 71-79 ◽  
Author(s):  
Gvidonas Labeckas ◽  
Arvydas Pauliukas ◽  
Stasys Slavinskas
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Energy Content ◽  
Direct Injection ◽  
Engine Performance ◽  
Fuel Additive ◽  
Exhaust Gas ◽  
Shale Oil ◽  
Speed Range ◽  
Wide Speed Range

The purpose of this research is to perform comparative analysis of the effect of fuel additive SO‐2E on the economical and ecological parameters of a direct‐injection Diesel engine, operating on Diesel fuel and shale oil alternately. It was proved that multifunctional fuel additive SO‐2E applied in proportion 0,2 vol % is more effective for improving combustion of shale oil than Diesel fuel. At light operation range the treated shale oil savings based upon fuel energy content throughout wide speed range 1400–2000 min−1 reduce from 14,6–12,3MJ/kWh to 11,6–11,8 MJ/kWh or by 20,5–4,1 %. Maximum NO emission for treated Diesel fuel was reduced by 7,8–11,8 %, whereas NO2 simultaneously increased by 3,8–7,4 %. In the case of treated shale oil both harmful pollutants were reduced by 22,9–28,6 % and by 41,6–13,4 %, respectively. The exhaust gas opacity and CO emissions at the rated performance regime for both fuels were obtained a bit higher, whereas HC emission for treated shale oil increases 1,9 times and for Diesel fuel remains on the same level.

A review study on using diethyl ether in diesel engines: Effects on fuel properties, injection, and combustion characteristics

2019 ◽  
Vol 31 (2) ◽  
pp. 179-214 ◽  
Author(s):  
İsmet Sezer
Keyword(s):  
Particulate Matter ◽  
Diesel Engine ◽  
Nitrogen Oxides ◽  
Diethyl Ether ◽  
Diesel Engines ◽  
Alternative Fuels ◽  
Engine Performance ◽  
Fuel Additive ◽  
Fuel Additives ◽  
Review Study

This study was compiled from the results of various researches performed on using diethyl ether as a fuel or fuel additive in diesel engines. Three different techniques are used, the reduction of the harmful exhaust emissions of diesel engines. The first technique for the reduction of harmful emissions has improved the combustion by modification of engine design and fuel injection system, but this process is expensive and time-consuming. The second technique is the use of various exhaust gas devices like catalytic converter and diesel particulate filter. However, the use of these devices affects negatively diesel engine performance. The final technique to reduce emissions and also improve diesel engine performance is the use of various alternative fuels or fuel additives. The major pollutants of diesel engines are nitrogen oxides and particulate matter. It is very difficult to reduce nitrogen oxides and particulate matter emissions simultaneously in practice. Most researches declare that the best way to reduce these emissions is the use of various alternative fuels i.e. natural gas, biogas, biodiesel, or the use of fuel additives with these alternative fuels or conventional diesel fuel. Therefore, it is very important that the results of various studies on alternative fuels or fuel additives are evaluated together for practice applications. Especially, this study focuses on the use of diethyl ether in diesel engines as fuel or fuel additive in various diesel engine fuels. This review study investigates the effects of diethyl ether on the fuel properties, injection, and combustion characteristics.

Experimental Study of the Effects of Thermal Coating and Oxygenated Additives on Diesel Engine Performance and Pollutant Emissions

2008 ◽  
Author(s):  
P. Ramu ◽  
C. G. Saravanan
Keyword(s):  
Diesel Engine ◽  
Internal Combustion Engines ◽  
Cooling System ◽  
Engine Performance ◽  
Plasma Coating ◽  
Nox Emission ◽  
Pollutant Emissions ◽  
Exhaust Emission ◽  
Fuel Additive ◽  
Oxygenated Additives

In internal combustion engines, approximately one third of the total fuel input energy was converted into useful work and two-third has loss through exhaust gas and cooling system. Recently research has been focused on the reduction of diesel emitted pollutants due to strict emission regulations. In this study, the effect of ceramic coating to cylinder head, valves and piston crown on diesel engine performance and exhaust emission is examined. Ceramic layers were made by ZrO2-Al2O3 by using plasma coating method thickness to about 200 microns. The ceramic coated diesel engine was tested in a single cylinder, four stroke and water cooled DI diesel engine. Second part of the investigation was carried out with the fuel additive di iso propyl ether with thermal barrier coated diesel engine. The results indicate that there is reduction in fuel consumption, NOx emission and slightly increases the thermal efficiency of the engine. The combined effect of coating and fuel additive has significantly reduced the NOx emission.

scholarly journals Improving Diesel Engine Efficiency and Emissions Using Fuel Additives

2018 ◽  
Vol 11 (2) ◽  
pp. 74-78
Author(s):  
Obed M. Ali ◽  
Fattah H. Hasan ◽  
Abid Z. Khalaf
Keyword(s):  
Diesel Engine ◽  
Diethyl Ether ◽  
Cetane Number ◽  
Engine Performance ◽  
Exhaust Emissions ◽  
Fuel Additive ◽  
Fuel Quality ◽  
Important Indicator ◽  
Engine Efficiency ◽  
Study Results

Diesel engine is widely used in the different applications of the modern life. Diesel fuel quality is an important indicator of the engine efficiency and exhaust emissions. However, the low cetane number of the commercial diesel resulting from improper refining processes lead to significant reduction in the engine efficiency. Hence, the aim of this study is to use diethyl ether to improve the fuel quality for better engine performance at lower engine emissions. Diethyl ether has been used at 5% percentage with commercial diesel, and the cetane number of the fuel was measured. Engine test was conducted at increasing speed to evaluate the engine performance and emissions. The study results show an improvement in the fuel cetane number from 49 to 51 with 5% diethyl ether. Furthermore, significant increase in engine power by about 10% has been recorded for the whole engine speed with slightly lower specific fuel consumption at low and medium engine speeds. Moreover, noticeable reduction in NOx emissions and CO emissions has been observed compared to commercial diesel. Therefore, it can be concluded that the utilization of diethyl ether as a fuel additive with commercial diesel can be considered for improving engine efficiency and control exhaust emissions.

Sign in / Sign up

Export Citation Format

Share Document