Aqueous Matrix Compositions and pH Influence Feline Calicivirus Inactivation by High Pressure Processing†

2008 ◽  
Vol 71 (8) ◽  
pp. 1598-1603 ◽  
Author(s):  
DAVID H. KINGSLEY ◽  
HAIQIANG CHEN
Keyword(s):  
High Pressure ◽  
Whey Protein ◽  
Water Activity ◽  
High Pressure Processing ◽  
Feline Calicivirus ◽  
Reduced Pressure ◽  
Nacl Concentration ◽  
Effects Of Ph ◽  
Pressure Resistance ◽  
The Individual

The individual effects of pH (pH 3 to 8), NaCl (0 to 21%), sucrose (0 to 70%), and whey protein (0 to 2%) on pressure resistance of feline calicivirus (FCV) in Dulbecco's modified Eagle medium with 10% fetal bovine serum were determined. At pH 3 through 8, the virus was more resistant to pressure at a pH of ≤5.2. For FCV samples with sucrose (up to 40%) or NaCl (up to 12%), the amount of FCV inactivated by pressure was inversely proportional to the sucrose or NaCl concentration. For example, a treatment of 250 MPa at 20°C for 5 min reduced the FCV titer by 5.1 log PFU/ml without added sucrose and by 0.9 log PFU/ml with 40% sucrose. Reduced pressure sensitivity with increasing NaCl and sucrose concentrations was not a simple function of water activity. Different PFU reductions were observed for NaCl and sucrose samples with equivalent water activity. Whey protein at concentrations up to 2% did not provide a protective effect. The combined effect of NaCl and sucrose at 4 and 20°C on pressure resistance of FCV also was examined. When both NaCl and sucrose were added to the FCV stock, they had an additive effect on increasing the pressure resistance of FCV. The individual (6% NaCl or 20% sucrose) and combined (6% NaCl plus 20% sucrose) resistance effects did not abrogate enhanced inactivation for pressure treatments at 4°C compared with those at 20°C. Aqueous matrix compositions, in particular different concentrations of NaCl and sucrose or different pH values, can substantially alter the efficiency of virus inactivation by high pressure processing.

scholarly journals Unravelling the Molecular Mechanisms Underlying the Protective Effect of Lactate on the High-Pressure Resistance of Listeria monocytogenes

Biomolecules ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 677
Author(s):  
Cristina Serra-Castelló ◽  
Ilario Ferrocino ◽  
Anna Jofré ◽  
Luca Cocolin ◽  
Sara Bover-Cid ◽  
...  
Keyword(s):  
High Pressure ◽  
Protective Effect ◽  
Molecular Mechanisms ◽  
Rna Extraction ◽  
Meat Products ◽  
High Pressure Processing ◽  
Membrane Properties ◽  
Short Exposure ◽  
Cooked Ham ◽  
Pressure Resistance

Formulations with lactate as an antimicrobial and high-pressure processing (HPP) as a lethal treatment are combined strategies used to control L. monocytogenes in cooked meat products. Previous studies have shown that when HPP is applied in products with lactate, the inactivation of L. monocytogenes is lower than that without lactate. The purpose of the present work was to identify the molecular mechanisms underlying the piezo-protection effect of lactate. Two L. monocytogenes strains (CTC1034 and EGDe) were independently inoculated in a cooked ham model medium without and with 2.8% potassium lactate. Samples were pressurized at 400 MPa for 10 min at 10 °C. Samples were subjected to RNA extraction, and a shotgun transcriptome sequencing was performed. The short exposure of L. monocytogenes cells to lactate through its inoculation in a cooked ham model with lactate 1h before HPP promoted a shift in the pathogen’s central metabolism, favoring the metabolism of propanediol and ethanolamine together with the synthesis of the B12 cofactor. Moreover, the results suggest an activated methyl cycle that would promote modifications in membrane properties resulting in an enhanced resistance of the pathogen to HPP. This study provides insights on the mechanisms developed by L. monocytogenes in response to lactate and/or HPP and sheds light on the understanding of the piezo-protective effect of lactate.

scholarly journals Population-Wide Survey of Salmonella enterica Response to High-Pressure Processing Reveals a Diversity of Responses and Tolerance Mechanisms

2017 ◽  
Vol 84 (2) ◽  
Author(s):  
Sandeep Tamber
Keyword(s):  
High Pressure ◽  
Foodborne Pathogens ◽  
Salmonella Enterica ◽  
High Pressure Processing ◽  
Food Preservation ◽  
Iodide Uptake ◽  
Membrane Fatty Acid Composition ◽  
Content Type ◽  
Pressure Resistance ◽  
Treatment Sensitivity

ABSTRACTHigh-pressure processing is a nonthermal method of food preservation that uses pressure to inactivate microorganisms. To ensure the effective validation of process parameters, it is important that the design of challenge protocols consider the potential for resistance in a particular species. Herein, the responses of 99 diverseSalmonella entericastrains to high pressure are reported. Members of this population belonged to 24 serovars and were isolated from various Canadian sources over a period of 26 years. When cells were exposed to 600 MPa for 3 min, the average reduction in cell numbers for this population was 5.6 log10CFU/ml, with a range of 0.9 log10CFU/ml to 6 log10CFU/ml. Eleven strains, from 5 serovars, with variable levels of pressure resistance were selected for further study. The membrane characteristics (propidium iodide uptake during and after pressure treatment, sensitivity to membrane-active agents, and membrane fatty acid composition) and responses to stressors (heat, nutrient deprivation, desiccation, and acid) for this panel suggested potential roles for the cell membrane and the RpoS regulon in mediating pressure resistance inS. enterica. The data indicate heterogeneous and multifactorial responses to high pressure that cannot be predicted for individualS. entericastrains.IMPORTANCEThe responses of foodborne pathogens to increasingly popular minimal food decontamination methods are not understood and therefore are difficult to predict. This report shows that the responses ofSalmonella entericastrains to high-pressure processing are diverse. The magnitude of inactivation does not depend on how closely related the strains are or where they were isolated. Moreover, strains that are resistant to high pressure do not behave similarly to other stresses, suggesting that more than one mechanism might be responsible for resistance to high pressure and the mechanisms used may vary from one strain to another.

Effect of High Hydrostatic Pressure on Salmonella Inoculated into Creamy Peanut Butter with Modified Composition

2014 ◽  
Vol 77 (10) ◽  
pp. 1664-1668 ◽  
Author(s):  
TANYA D'SOUZA ◽  
MUKUND KARWE ◽  
DONALD W. SCHAFFNER
Keyword(s):  
High Pressure ◽  
Hydrostatic Pressure ◽  
Water Activity ◽  
High Hydrostatic Pressure ◽  
Peanut Butter ◽  
High Pressure Processing ◽  
Peanut Oil ◽  
Peanut Flour ◽  
Log Reduction ◽  
High Hydrostatic Pressure Processing

Peanut butter has been associated with several large foodborne salmonellosis outbreaks. This research investigates the potential of high hydrostatic pressure processing (HPP) for inactivation of Salmonella in peanut butter of modified composition, both by modifying its water activity as well by the addition of various amounts of nisin. A cocktail of six Salmonella strains associated with peanut butter and nut-related outbreaks was used for all experiments. Different volumes of sterile distilled water were added to peanut butter to increase water activity, and different volumes of peanut oil were added to decrease water activity. Inactivation in 12% fat, light roast, partially defatted peanut flour, and peanut oil was also quantified. Nisaplin was incorporated into peanut butter at four concentrations corresponding to 2.5, 5.0, 12.5, and 25.0 ppm of pure nisin. All samples were subjected to 600 MPa for 18 min. A steady and statistically significant increase in log reduction was seen as added moisture was increased from 50 to 90%. The color of all peanut butter samples containing added moisture contents darkened after high pressure processing. The addition of peanut oil to further lower the water activity of peanut butter further reduced the effectiveness of HPP. Just over a 1-log reduction was obtained in peanut flour, while inactivation to below detection limits (2 log CFU/g) was observed in peanut oil. Nisin alone without HPP had no effect. Recovery of Salmonella after a combined nisin and HPP treatment did show increased log reduction with longer storage times. The maximum log reduction of Salmonella achieved was 1.7 log CFU/g, which was comparable to that achieved by noncycling pressure treatment alone. High pressure processing alone or with other formulation modification, including added nisin, is not a suitable technology to manage the microbiological safety of Salmonella-contaminated peanut butter.

Inactivation of Yersinia pseudotuberculosis 197 and Francisella tularensis LVS in Beverages by High Pressure Processing

2009 ◽  
Vol 72 (1) ◽  
pp. 165-168 ◽  
Author(s):  
JOSEPH E. SCHLESSER ◽  
BRIAN PARISI
Keyword(s):  
High Pressure ◽  
Francisella Tularensis ◽  
Orange Juice ◽  
Yersinia Pseudotuberculosis ◽  
Hold Time ◽  
Skim Milk ◽  
High Pressure Processing ◽  
Pressure Treatment ◽  
Log Reduction ◽  
Pressure Resistance

In 2003, the U.S. Department of Health and Human Services announced a new research program to develop technologies and strategies to prevent and minimize potential food safety and security threats. The threat of terrorist attacks against the nation's food supplies has created the need to study microorganisms not typically associated with foodborne illness. High-pressure processing has been proposed as a treatment to reduce Yersinia pestis and Francisella tularensis LVS levels in beverages. The objectives of this work were to determine the pressure resistance of Y. pseudotuberculosis 197 (surrogate for Y. pestis) and F. tularensis LVS (vaccine strain). For each bacterium, samples of ultrahigh-temperature pasteurized skim milk and pasteurized reduced-acid orange juice (pH ca. 4.2) were inoculated at a minimum level of 5 log CFU/ml. Ten-milliliter samples of the inoculated product were vacuum sealed in polyester pouches and subjected to pressures of 300 and 500 MPa for holding times ranging from 30 s to 6 min. One set of trials was performed at an initial temperature of 10°C and another at 25°C. Processed samples were immediately plated and enumerated. A pressure treatment of 300 MPa at 25°C for less than 6 min was not sufficient to achieve a 5-log reduction of Y. pseudotuberculosis 197 or F. tularensis LVS in milk. However, a pressure treatment of 500 MPa was effective at hold times as low as 30 s. Overall, F. tularensis LVS demonstrated less pressure resistance than Y. pseudotuberculosis 197. Based on these findings, a high-pressure process designed to inactivate 5 log CFU of Y. pseudotuberculosis 197 per ml and F. tularensis LVS in orange juice or milk should be set at or above 500 MPa with a hold time of 2 min or greater.

scholarly journals Combined Effect of Microencapsulated Horseradish Juice and High-Pressure Treatment on Pork Quality During Storage

2021 ◽  
Vol 75 (6) ◽  
pp. 463-468
Author(s):  
Sanita Sazonova ◽  
Lolita Tomsone ◽  
Ruta Galoburda ◽  
Ilze Grāmatiņa ◽  
Thierry Talou
Keyword(s):  
High Pressure ◽  
Water Activity ◽  
Meat Products ◽  
Antimicrobial Properties ◽  
High Pressure Processing ◽  
Plate Count ◽  
Meat Sample ◽  
Pressure Treatment ◽  
Pork Meat ◽  
High Pressure Treatment

Abstract High-pressure processing (HPP) is well suited to combine consumer demand for meat products with minimal heat treatment without compromising product safety. In turn, herbs have antioxidant and antimicrobial properties. The aim of this study was to evaluate the application of hurdle technology combining microencapsulated horseradish root and leaf juice with HPP (300 MPa; 15 min) for extending of the raw pork meat shelf life. Water activity (aw), pH, colour, hardness, and micro-biological parameters of meat were evaluated during 21-day storage. Total plate count (TPC) in HPP treated samples was significantly smaller (p < 0.05) compared to untreated samples during storage until the day 14. On day 21, the TPC in processed samples was still slightly lower, however, at this point significance was not established between samples. Water activity dynamics in the HPP-treated microencapsulated pork meat samples differed significantly from other samples. Hardness decreased during storage, but no significant differences were found between samples. The L* values and pH of the meat were not significantly influenced by the added microencapsulated juice, but by high pressure treatment. Treatment with microencapsulated horseradish juice had a positive effect on the TPC and aw of the meat sample.

Pressure Death and Tailing Behavior of Listeria monocytogenes Strains Having Different Barotolerances

2003 ◽  
Vol 66 (11) ◽  
pp. 2057-2061 ◽  
Author(s):  
ABDULLATIF TAY ◽  
THOMAS H. SHELLHAMMER ◽  
AHMED E. YOUSEF ◽  
GRADY W. CHISM
Keyword(s):  
High Pressure ◽  
Listeria Monocytogenes ◽  
High Pressure Processing ◽  
Pressure Treatment ◽  
Probable Number ◽  
Potential Target ◽  
Pressure Sensitive ◽  
Wide Range ◽  
Pressure Resistance ◽  
Kinetics Of

The objectives of this study were to investigate the variability among Listeria monocytogenes strains in response to high-pressure processing, identify the most resistant strain as a potential target of pressure processing, and compare the inactivation kinetics of pressure-resistant and pressure-sensitive strains under a wide range (350 to 800 MPa) of pressure treatments. The pressure resistance of Listeria innocua and nine strains of L. monocytogenes was compared at 400 or 500 MPa and 30°C. Significant variability among strains was observed. The decrease in log CFU/ml during the pressure treatment was from 1.4 to 4.3 at 400 MPa and from 3.9 to &gt;8 at 500 MPa. L. monocytogenes OSY-8578 exhibited the greatest pressure resistance, Scott A showed the greatest pressure sensitivity, and L. innocua had intermediate resistance. On the basis of these findings, L. monocytogenes OSY-8578 is a potential target strain for high-pressure processing efficacy studies. The death kinetics of L. monocytogenes Scott A and OSY-8578 were investigated at 350 and 800 MPa. Survivors at 350 MPa were enumerated by direct plating, and survivors at 800 MPa were enumerated by the most-probable-number technique. Both pressure-resistant and pressure-sensitive strains exhibited non–first-order death behavior, and excessive pressure treatment did not eliminate the tailing phenomenon.

Sign in / Sign up

Export Citation Format

Share Document