Microbial Contamination Level Profiles Attributed to Contamination of Beef Carcasses, Personnel, and Equipment: Case of Small and Medium Enterprise Slaughterhouses

2018 ◽  
Vol 81 (4) ◽  
pp. 684-691 ◽  
Author(s):  
JOSEPH WAMBUI ◽  
PETER LAMUKA ◽  
EDWARD KARURI ◽  
JOSEPH MATOFARI ◽  
PATRICK MURIGU KAMAU NJAGE

ABSTRACT The microbial contamination level profiles (MCLPs) attributed to contamination of beef carcasses, personnel, and equipment in five Kenyan small and medium enterprise slaughterhouses were determined. Aerobic plate counts, Enterobacteriaceae, Staphylococcus, and Salmonella were used to determine contamination at four different slaughter stages, namely, dehiding, evisceration, splitting, and dispatch. Microbiological criteria of the four microorganisms were used to score contamination levels (CLs) as poor (0), poor to average (1), average (2), or good (3). MCLPs were further assigned to carcasses, personnel, and equipment at each stage by summing up the CL scores. The CL score attributed to aerobic plate count contamination was 2 or 3 for carcasses but 0 for personnel and equipment in almost all slaughterhouses. A score of 0 on carcasses was mostly attributed to Enterobacteriaceae at evisceration and to Salmonella at dehiding and evisceration. In addition, a score of 0 was mostly attributed to Staphylococcus contamination of personnel at dehiding. A score of 3 was attributed mostly to Enterobacteriaceae on hands at splitting, whereas a score of 2 was mostly attributed to the clothes at dehiding and evisceration. A CL score of 3 was mostly attributed to Enterobacteriaceae and Salmonella contamination of equipment at dehiding and splitting, respectively. Although CLs attributed to contamination of carcasses, personnel, and equipment ranged from 0 to 3, the maximum MCLP score of 9 was only attained in carcasses from two slaughterhouses at dehiding and from one slaughterhouse at dispatch. There is, therefore, a lot of room for small and medium enterprise slaughterhouses to improve their food safety objectives by improving food safety management systems at the points characterized by low CL scores.

Author(s):  
Hendy Firmanto

Dry cocoa bean quality is also determined by its microbe contamination level. Steaming process for dried cocoa beans as a pretreatment process was selected because of less effect on organic compound inside the dried cocoa bean. This experiment aim was to study microbial contamination level of cocoa beans using steaming process, determining its microbial population and evaluate its chemical changes. Experiment was carried out in Postharvest Laboratory of Indonesian Coffee and Cocoa Research Institute. Cocoa beans for the experiment were lots collected from four farms in Jayapura, Papua with different microbial contamination level for each lot. Results of this experiment showed that optimum steaming process was 15 minutes at 100 O C with 10 minutes preheating time. Microbial analysis result of the four lots after complete steaming process by total plate count method showed the same result (<3.0 x 103 cfu). Most of the decrease in microbial contaminant appeared in the plate was 73.5% of Staphylococcus aureusand 0.058% of Penicilliumsp. Bean acidity (pH) after steaming increased (4.76 to 4.80) and free fatty acid increased (1.81% to 1.96%) while carbohydrate content decreased (17.5% to 15.9%) and as well as protein content (12.6% into 11.7%). Key words: cocoa bean, steaming process, microbe reduction, nutrient changes


2018 ◽  
Vol 81 (9) ◽  
pp. 1445-1449 ◽  
Author(s):  
JOSEPH WAMBUI ◽  
TAURAI TASARA ◽  
PATRICK MURIGU KAMAU NJAGE ◽  
ROGER STEPHAN

ABSTRACT The present study aimed at identifying and assessing antimicrobial resistance of Enterococcus spp. isolated from small and medium enterprise slaughterhouses in Kenya. In total, 67 isolates were recovered from 48 of 195 samples examined from beef carcasses, personnel, and cutting equipment in five small and medium enterprise slaughterhouses. The isolates were identified by using matrix-assisted laser desorption–ionization time of flight mass spectrometry and screened thereafter for their resistance against 12 antibiotics by using a disk diffusion assay. The isolates (n = 67) included Enterococcus faecalis (41.8%), Enterococcus mundtii (17.9%), Enterococcus thailandicus (13.4%), Enterococcus faecium (9.0%), Enterococcus hirae (7.5%), Enterococcus casseliflavus (6.0%), and Enterococcus devriesei (4.5%). None of the isolates were resistant to ciprofloxacin, penicillin, ampicillin, vancomycin, nitrofurantoin, teicoplanin, linezolid, and levofloxacin. Resistance to rifampin (46.3%), erythromycin (23.9%), tetracycline (20.9%), and chloramphenicol (7.5%) was distributed among six of the seven species. All E. thailandicus were resistant to rifampin, erythromycin, and tetracycline. E. faecalis was resistant to rifampin (60.7%), tetracycline (17.9%), erythromycin (14.3%), and chloramphenicol (10.7%). Resistance to two or three antibiotics was observed in 26.9% of the enterococci isolates. The isolation of enterococci that are resistant to clinically relevant antibiotics, such as erythromycin, is of a serious concern given the role enterococci play in the transfer of antibiotic resistance genes.


2021 ◽  
Vol 28 (3) ◽  
pp. 129-142
Author(s):  
Cheah Hua Yen ◽  
Suhaila Emma Merican ◽  
Nor Khaizura Mahmud@Ab Rashid ◽  
Ainul Zakiah Abu Bakar ◽  
Syaliza Omar ◽  
...  

Background: The objective of the study is to assess the performance of the Food Safety Management System (FSMS) among powdered beverage manufacturers using Food Safety Management System Diagnostic Tools (FSMS-DI) and Microbial Assessment Scheme (MAS). Methods: FSMS-DI was used to evaluate the context factors, core control and core assurance activities of five powdered beverage manufacturers with different types of FSMS certification. Manufacturer A is not certified with any FSMS, while manufacturers B, C, D and E are complied with MeSTI, GMP, HACCP and ISO 22000, respectively. For MAS, samples were collected from the selected critical sampling locations of two manufacturers who complied FSMS with the least (manufacturer B) and the most stringent (manufacturer E) requirements. The samples consisted of two different types of powdered beverage products were analysed for total plate count (TPC), Salmonella, Escherichia coli, Staphylococcus aureus, yeast and mould count (YMC). Results: The food safety (FS) output of powdered beverages for manufacturer E was better (overall score of 3) than manufacturer B (overall score of 2–3). Manufacturer E was able to achieve their FS objectives. The FSMS activities of manufacturer C, D and E were better (overall score of 2–3) than manufacturer A and B (overall score of 1–2). Conclusion: The study demonstrated that FSMS-DI and MAS can be used to differentiate the FSMS performance of powdered beverage manufacturers with different types of FSMS certification. Higher scores of FSMS activities obtained by the manufacturer who complied with stringent FSMS certifications contributed to better microbiological safety performance of powdered beverages.


2011 ◽  
Vol 74 (9) ◽  
pp. 1569-1573 ◽  
Author(s):  
E. DOMÉNECH ◽  
J. A. AMORÓS ◽  
I. ESCRICHE

To gain more insight into the context of food safety management by public administrations, food safety objectives must be studied. The Valencian administration quantified the prevalence of Listeria monocytogenes in cafeterias and restaurants in this region of Spain between 2002 and 2010. The results obtained from this survey are presented here for 2,262 samples of fish, salad, egg, cold meat, and mayonnaise dishes. Microbiological criteria defined for L. monocytogenes were used to differentiate acceptable and unacceptable samples; more than 99.9% of the samples were acceptable. These findings indicate that established food safety objectives are achievable, consumer health at the time of consumption can be safeguarded, and food safety management systems such as hazard analysis critical control point plans or good manufacturing practices implemented in food establishments are effective. Monitoring of foods and food safety is an important task that must continue to reduce the current L. monocytogenes prevalence of 0.1% in restaurant or cafeteria dishes, which could adversely affect consumer health.


2020 ◽  
Vol 14 ◽  
pp. 117863022092972
Author(s):  
Tran Thi Tuyet Hanh ◽  
Mac Huy Hanh

Background: Ice is used in large quantities as refreshment in alcoholic and nonalcoholic beverages, especially in summer time. Contamination of edible ice products with pathogens is a public health concern in various countries, including Vietnam. This study aimed to assess the food safety conditions, the quality of edible ice products and related factors at manufacturing premises in Binh Phuoc Province, Vietnam in 2019. Methods: A cross-sectional study was conducted in 2019 using both quantitative and qualitative methods. Food safety assessment was carried out in all 45 ice producing premises in the province and 79 ice samples were collected and analyzed microbiologically. In-depth interviews were conducted with 2 food safety management staff, 4 owners of premises, and 4 workers. Results: Only 22.4% (18/79) and 37.8% (30/79) of the premises met requirement for food safety conditions and microbiological food safety requirements, respectively. Half of the ice samples, 51.9% (41/79), were contaminated, 49.4% (39/79) with Escherichia coli and 12.7% (10/79) with total coliforms. Streptococci, Pseudomonas aeruginosa were not detected. The major risks were material, odds ratio (OR) = 4.2 (95% confidence interval [CI]: 1.002-17.6), structural challenges in the facilities, OR = 4.3 (95% CI: 1.13-16.7), broken floors or difficulty in cleaning, OR = 5.4 (95% CI: 1.26-22.9), and poor staff hygiene practices, OR = 19.5 (95% CI: 4.2-91.1). Workers lacked knowledge and appropriate practices to prevent microbial contamination of ice products. Conclusions: The food safety conditions and the quality of ice cubes at manufacturing premises in Binh Phuoc Province were not acceptable. Hygiene deficiencies in ice producing and handling processes, inadequate knowledge of staff, inadequate food safety management practices, and hygiene conditions of the premises were important factors in producing contaminated ice products. We recommend more staff training and crediting the staff when performing adequate practices, paying attention to broken floors or difficulty in cleaning, structural deficiency, and ensuring regular monitoring of premises. This study adds a special interest to ensure food safety conditions at ice producing premises to prevent microbial contamination of the products.


2016 ◽  
Vol 79 (1) ◽  
pp. 157-162 ◽  
Author(s):  
JUN WANG ◽  
JOONG-HYUN PARK ◽  
NA-JUNG CHOI ◽  
SANG-DO HA ◽  
DEOG-HWAN OH

ABSTRACT This study was conducted to evaluate the microbial contamination in rice cake materials and products during processing and in the operation environment in nonhazard analysis [and] critical control point factories. Furthermore, the environmental health of the processing facilities and the bacterial and fungal contamination on the workers' hands were investigated. Pour plate methods were used for enumeration of aerobic plate count (APC), yeast and molds (YM), Bacillus cereus, Staphylococcus aureus, and Clostridium perfringens, whereas Petrifilm count plates were used for enumeration of coliforms and Escherichia coli. The respective microbial levels of APC, coliforms, YM, and B. cereus were in the range of 2.6 to 4.7, 1.0 to 3.8, not detected (ND) to 2.9, and ND to 2.8 log CFU/g in the raw materials and in the range of 2.3 to 6.2, ND to 3.6, ND to 2.7, and ND to 3.7 log CFU/g during processing of the rice cake products. During the processing of rice cakes, APC, coliforms, YM, and B. cereus increased during soaking and smashing treatments and decreased after steaming treatment. E. coli, S. aureus, and C. perfringens were not detected in any of the raw materials and operating areas or during processing. B. cereus was detected on the operators' hands at microbial contamination levels of 1.9 ± 0.19 to 2.0 ± 0.19 log CFU/g. The results showed that B. cereus in the end product is presumably the main concern for rice cakes. In addition, the high contamination level of B. cereus during manufacturing processes, including soaking, smashing, and molding, and the absence of B. cereus from the air sampling plates indicated that the contaminated equipment showed the potential risk to cause cross-contamination.


Foods ◽  
2021 ◽  
Vol 10 (9) ◽  
pp. 2169
Author(s):  
Jocelyn C. Lee ◽  
Aura Daraba ◽  
Chrysa Voidarou ◽  
Georgios Rozos ◽  
Hesham A. El Enshasy ◽  
...  

The food industry’s failure in planning and designing of and in implementing a Food Safety Management System and its foundation elements leads, in most instances, to compromised food safety and subsequent foodborne illness outbreaks. This phenomenon was noticed, worldwide, for all food processors, but with a much higher incidence in the medium- and small-sized food processing plants. Our study focuses on the importance of Food Safety Management System (FSMS), Critical Control Points Hazard Analysis (HACCP) and the Prerequisite Programs (PRPs) as the foundation of HACCP, in preventing foodborne outbreaks. For emphasis, we make use of the example of organizational food safety culture failures and the lack of managerial engagement which resulted in a multi-state listeriosis outbreak in USA. Moreover, we correlate this with microbiological criteria. Implementation of food safety management systems (ISO 22000:2018) along with incorporation of management tools such as HAZOP, FMEA, Ishikawa and Pareto have proved to be proactive in the maintenance of a positive food safety culture and prevention of cross-contamination and fraud.


2020 ◽  
Vol 6 (1) ◽  
pp. 087
Author(s):  
Rosy Hutami ◽  
M Fakih Kurniawan ◽  
Henna Khoerunnisa

Sumedang tofu is one of favorite foods for Indonesian society. But many sellers or producers are not aware to the food safety of sumedang tofu. The aims of this study were to analyze the microbial, formalin, and lead (Pb) contents in ready-to-eat sumedang tofu which were sold in traffic jams area in Cicurug, Ciawi, and Cisarua. The analysis were carried out by Total Plate Count (TPC) testing for microbial analysis, potassium permanganate reaction (KMnO4) testing for formaldehyde analysis, and atomic absorption spectrophotometry (AAS) method for lead content analysis in the samples. The results obtained for the microbial analysis were sumedang tofu that were sold in the traffic jam areas of Cicurug, Ciawi, and Cisarua contained contaminant above the treshold (1.4 x 105 colonies / gram to 2.2 x 105 colonies / gram of microbes). All of the samples of sumedang tofu were positive containing formaldehyde. Otherwise, there were no lead (Pb) content in all samples regarding to AAS analysis. This study concluded that the ready-to-eat sumedang tofu those were sold in traffic jam area in the Cicurug, Ciawi, and Cisarua were not suitable for consumption because it contained exceed microbial contamination and formalin which are harmful for human health.Keywords : formalin, microbes, sumedang tofu, lead, traffic jam


Sign in / Sign up

Export Citation Format

Share Document