scholarly journals Influence of the Heat Loss on the Performance of a Two-stage Gasification Reactor

2021 ◽  
Vol 15 ◽  
pp. 61-63
Author(s):  
Martino Paolucci ◽  
Carlo Borgianni ◽  
Sonia Panzieri ◽  
Benedetta de Caprariis ◽  
Paolo de Filippis
Keyword(s):  
Heat Loss ◽  
Landfill Gas ◽  
Two Stage ◽  
Oxygen Injection ◽  
Heating Value ◽  
Exothermic Reactions ◽  
High Heating Value ◽  
Gasification Efficiency ◽  
The One ◽  
Two Stages

This paper investigates the gasification efficiency of a two stage gasifier, described in all detail in previous works, as a function of the heat loss across the reactor walls. The behaviour of the reactor was simulated using a simple mathematical model already reported in previous papers. The examined heat loss ranges from 0% of the heat produced by the exothermic reactions into the reactor, up to 20%. Calculations have been performed by keeping constant both the injected total oxygen and its partition between the two stages, while different feedstocks have been used, such as landfill gas, municipal solid waste (MWS), willow and rice straw. The results of calculation show that the gasification efficiency at fixed oxygen injection is greatly influenced by the feedstock. The elaboration of the obtained data indicates also that the trend of the gasification efficiency vs. heat loss is a function of the high heating value of the feedstock and of the ratio between the oxygen present into the reactor (injected + the one of the feedstock) and the stoichiometric oxygen necessary to transform the feeding into carbon dioxide and steam.

scholarly journals STUDY ON CO-FERMENTATION OF COW DUNG AND GIANT DIRT IN SEMI-CONTINUOUS ANAEROBIC DIGESTER

2018 ◽  
Vol 54 (2A) ◽  
pp. 287
Author(s):  
Nguyen Le Phuong
Keyword(s):  
Anaerobic Digester ◽  
Pistia Stratiotes ◽  
Cow Dung ◽  
Two Stage ◽  
One Stage ◽  
Input Material ◽  
Mixing Rates ◽  
Set Up ◽  
The One ◽  
Two Stages

Study on co-fermentation of cow dung (CD) and giant dirt (GD - Pistia stratiotes L.) in semi-continuous anaerobic digester aims to test biogas quantity and quality by time. Three mixing rates counted based on ODM of each material were chosen: 100 %CD, 50 %CD + 50 %GD, and 100 %GD. The experiments were set up in laboratory conditions with two types of digesters: one-stage digesters and two-stage digesters (triplicate for each treatment). After 80 days, the biogas produced from the one-stage digesters was not significantly different to the two-stage digesters with similar input material. The highest production of biogas came from digesters of 100 %GD - 235.8 L for the one-stage and 240.3 L for the two-stages. The medium production came from digesters of 50 %CD + 50 %GD - 127.8 L for the one-stage and 118.4 L for the two-stages. After one month, the percentage of CH4 was high enough for burning and almost giant dirt was digested that limited of a blockage inside the digesters. The results showed that co-fermentation of GD and CD is an alternative for livestock raising households to produce biogas for energy purpose.

A novel two-stage enriched air biomass gasification for producing low-tar high heating value fuel gas: Pilot verification and performance analysis

Energy ◽  
2019 ◽  
Vol 173 ◽  
pp. 511-522 ◽  
Author(s):  
Miaomiao Niu ◽  
Yaji Huang ◽  
Baosheng Jin ◽  
Shaohua Liang ◽  
Qing Dong ◽  
...  
Keyword(s):  
Performance Analysis ◽  
Biomass Gasification ◽  
Two Stage ◽  
Fuel Gas ◽  
Heating Value ◽  
High Heating Value ◽  
High Heating ◽  
And Performance

Two-Stage Procedure for the Quantitative Determination of Autoprothrombin III Concentration and Some Applications

1967 ◽  
Vol 18 (01/02) ◽  
pp. 198-210 ◽  
Author(s):  
Ronald S Reno ◽  
Walter H Seegers
Keyword(s):  
Prothrombin Time ◽  
Factor Vii ◽  
Two Stage ◽  
Pronounced Increase ◽  
One Stage ◽  
Assay Procedure ◽  
Bovine Plasma ◽  
The One ◽  
Autoprothrombin C

SummaryA two-stage assay procedure was developed for the determination of the autoprothrombin C titre which can be developed from prothrombin or autoprothrombin III containing solutions. The proenzyme is activated by Russell’s viper venom and the autoprothrombin C activity that appears is measured by its ability to shorten the partial thromboplastin time of bovine plasma.Using the assay, the autoprothrombin C titre was determined in the plasma of several species, as well as the percentage of it remaining in the serum from blood clotted in glass test tubes. Much autoprothrombin III remains in human serum. With sufficient thromboplastin it was completely utilized. Plasma from selected patients with coagulation disorders was assayed and only Stuart plasma was abnormal. In so-called factor VII, IX, and P.T.A. deficiency the autoprothrombin C titre and thrombin titre that could be developed was normal. In one case (prethrombin irregularity) practically no thrombin titre developed but the amount of autoprothrombin C which generated was in the normal range.Dogs were treated with Dicumarol and the autoprothrombin C titre that could be developed from their plasmas decreased until only traces could be detected. This coincided with a lowering of the thrombin titre that could be developed and a prolongation of the one-stage prothrombin time. While the Dicumarol was acting, the dogs were given an infusion of purified bovine prothrombin and the levels of autoprothrombin C, thrombin and one-stage prothrombin time were followed for several hours. The tests became normal immediately after the infusion and then went back to preinfusion levels over a period of 24 hrs.In other dogs the effect of Dicumarol was reversed by giving vitamin K1 intravenously. The effect of the vitamin was noticed as early as 20 min after administration.In response to vitamin K the most pronounced increase was with that portion of the prothrombin molecule which yields thrombin. The proportion of that protein with respect to the precursor of autoprothrombin C increased during the first hour and then started to go down and after 3 hrs was equal to the proportion normally found in plasma.

Standardization of Factor VIII – IV. Establishment of the 3rd International Standard for Factor VIII: C Concentrate

1983 ◽  
Vol 50 (03) ◽  
pp. 697-702 ◽  
Author(s):  
T W Barrowcliffe ◽  
A D Curtis ◽  
D P Thomas
Keyword(s):  
Factor Viii ◽  
High Purity ◽  
Collaborative Study ◽  
World Health ◽  
Current Standard ◽  
Two Stage ◽  
International Standard ◽  
One Stage ◽  
The One ◽  
Health Organization

SummaryAn international collaborative study was carried out to establish a replacement for the current (2nd) international standard for Factor VIII: C, concentrate. Twenty-six laboratories took part, of which 17 performed one-stage assays, three performed two-stage assays and six used both methods. The proposed new standard, an intermediate purity concentrate, was assayed against the current standard, against a high-purity concentrate and against an International Reference Plasma, coded 80/511, previously calibrated against fresh normal plasma.Assays of the proposed new standard against the current standard gave a mean potency of 3.89 iu/ampoule, with good agreement between laboratories and between one-stage and two- stage assays. There was also no difference between assay methods in the comparison of high-purity and intermediate purity concentrates. In the comparison of the proposed standard with the plasma reference preparation, the overall mean potency was 4.03 iu/ampoule, but there were substantial differences between laboratories, and the two-stage method gave significantly higher results than the one stage method. Of the technical variables in the one-stage method, only the activation time with one reagent appeared to have any influence on the results of this comparison of concentrate against plasma.Accelerated degradation studies showed that the proposed standard is very stable. With the agreement of the participants, the material, in ampoules coded 80/556, has been established by the World Health Organization as the 3rd International Standard for Factor VIII :C, Concentrate, with an assigned potency of 3.9 iu/ampoule.

scholarly journals Potential of Biochar Derived from Agricultural Residues for Sustainable Management

2021 ◽  
Vol 13 (15) ◽  
pp. 8147
Author(s):  
Sasiwimol Khawkomol ◽  
Rattikan Neamchan ◽  
Thunchanok Thongsamer ◽  
Soydoa Vinitnantharat ◽  
Boonma Panpradit ◽  
...  
Keyword(s):  
Chemical Properties ◽  
Agricultural Residues ◽  
Hydroxyl Groups ◽  
Asian Countries ◽  
Heating Value ◽  
Coconut Husk ◽  
High Heating Value ◽  
Horizontal Drum ◽  
Physical And Chemical ◽  
And Chemical Properties

A horizontal drum kiln is a traditional method widely used in Southeast Asian countries for producing biochar. An understanding of temperature conditions in the kiln and its influence on biochar properties is crucial for identifying suitable biochar applications. In this study, four agricultural residues (corncob, coconut husk, coconut shell, and rice straw) were used for drum kiln biochar production. The agricultural residues were turned into biochar within 100–200 min, depending on their structures. The suitability of biochar for briquette fuels was analyzed using proximate, ultimate, and elemental analysis. The biochar’s physical and chemical properties were characterized via bulk density, iodine number, pHpzc, SEM, and FTIR measurements. All biochars had low O/C and H/C ratios and negative charge from both carbonyl and hydroxyl groups. Coconut husk and shell biochar had desirable properties such as high heating value and a high amount of surface functional groups which can interact with nutrients in soil. These biochars are thus suitable for use for a variety of purposes including as biofuels, adsorbents, and as soil amendments.

scholarly journals Study on the Leakage and Inter-Stage Pressure Drop Characteristics of Two-Stage Finger Seal

2021 ◽  
Vol 11 (5) ◽  
pp. 2239
Author(s):  
Hailin Zhao ◽  
Hua Su ◽  
Guoding Chen ◽  
Yanchao Zhang
Keyword(s):  
Pressure Drop ◽  
Pressure Difference ◽  
Radial Displacement ◽  
Mean Square ◽  
The Finite Element Method ◽  
Axial Pressure ◽  
Two Stage ◽  
One Stage ◽  
The One ◽  
Lower Contact

To solve the high leakage and high wear problems faced by sealing devices in aeroengines under the condition of high axial pressure difference, the two-stage finger seal is proposed in this paper. The finite element method and computational fluid dynamics (FEM/CFD) coupling iterative algorithm of the two-stage finger seal is developed and validated. Then the performance advantages of two-stage finger seal compared to the one-stage finger seal are studied, as well as the leakage and the inter-stage pressure drop characteristics of two-stage finger seal are investigated. Finally, the measure to improve the inter-stage imbalance of pressure drop of two-stage finger seal is proposed. The results show that the two-stage finger seal has lower leakage and lower contact pressure than the one-stage finger seal at high axial pressure difference, but there exists an inter-stage imbalance of pressure drop. Increasing the axial pressure difference and the root mean square (RMS) roughness of finger element can aggravate the imbalance of pressure drop, while the radial displacement excitation of rotor has little influence on it. The results also indicate that the inter-stage imbalance of pressure drop of the two-stage finger seal can be improved by increasing the number of finger elements of the 1st finger seal and decreasing the number of finger elements of the 2nd finger seal.

Numerical assessment on the performance of variable area single- and two-stage ejectors: A comparative study

2021 ◽  
pp. 095440892110331
Author(s):  
Anil Kumar ◽  
Virendra Kumar ◽  
PMV Subbarao ◽  
Surendra K Yadav ◽  
Gaurav Singhal
Keyword(s):  
Change Theory ◽  
Single Stage ◽  
Two Stage ◽  
Entrainment Ratio ◽  
Ansys Fluent ◽  
One Dimensional ◽  
Flow Parameters ◽  
Constant Rate ◽  
Numerical Assessment ◽  
The One

The two-stage ejector has been suggested to replace the single-stage ejector geometrical configuration better to utilize the discharge flow’s redundant momentum to induce secondary flow. In this study, the one-dimensional gas dynamic constant rate of momentum change theory has been utilized to model a two-stage ejector along with a single-stage ejector. The proposed theory has been utilized in the computation of geometry and flow parameters of both the ejectors. The commercial computational fluid dynamics tool ANSYS-Fluent 14.0 has been utilized to predict performance and visualize the flow. The performance in terms of entrainment ratio has been compared under on- design and off-design conditions. The result shows that the two-stage ejector configuration has improved (≈57%) entrainment capacity than the single-stage ejector under the on-design condition.

scholarly journals Biochar and Energy Production: Valorizing Swine Manure through Coupling Co-Digestion and Pyrolysis

2020 ◽  
Vol 6 (2) ◽  
pp. 43 ◽  
Author(s):  
Rubén González ◽  
Judith González ◽  
José G. Rosas ◽  
Richard Smith ◽  
Xiomar Gómez
Keyword(s):  
Anaerobic Digestion ◽  
Waste Treatment ◽  
Wide Spectrum ◽  
Swine Manure ◽  
Solid Content ◽  
Electricity Production ◽  
Plant Design ◽  
Heating Value ◽  
High Heating Value ◽  
Bio Oil

Anaerobic digestion is an established technological option for the treatment of agricultural residues and livestock wastes beneficially producing renewable energy and digestate as biofertilizer. This technology also has significant potential for becoming an essential component of biorefineries for valorizing lignocellulosic biomass due to its great versatility in assimilating a wide spectrum of carbonaceous materials. The integration of anaerobic digestion and pyrolysis of its digestates for enhanced waste treatment was studied. A theoretical analysis was performed for three scenarios based on the thermal needs of the process: The treatment of swine manure (scenario 1), co-digestion with crop wastes (scenario 2), and addition of residual glycerine (scenario 3). The selected plant design basis was to produce biochar and electricity via combined heat and power units. For electricity production, the best performing scenario was scenario 3 (producing three times more electricity than scenario 1), with scenario 2 resulting in the highest production of biochar (double the biochar production and 1.7 times more electricity than scenario 1), but being highly penalized by the great thermal demand associated with digestate dewatering. Sensitivity analysis was performed using a central composite design, predominantly to evaluate the bio-oil yield and its high heating value, as well as digestate dewatering. Results demonstrated the effect of these parameters on electricity production and on the global thermal demand of the plant. The main significant factor was the solid content attained in the dewatering process, which excessively penalized the global process for values lower than 25% TS.

A novel two-stage method of plant seedlings classification based on deep learning

2021 ◽  
pp. 1-11
Author(s):  
Tianhong Dai ◽  
Shijie Cong ◽  
Jianping Huang ◽  
Yanwen Zhang ◽  
Xinwang Huang ◽  
...  
Keyword(s):  
Deep Learning ◽  
Learning Technology ◽  
Two Stage ◽  
Second Stage ◽  
Stage Classification ◽  
Different Types ◽  
Two Stages ◽  
Plant Seedlings

In agricultural production, weed removal is an important part of crop cultivation, but inevitably, other plants compete with crops for nutrients. Only by identifying and removing weeds can the quality of the harvest be guaranteed. Therefore, the distinction between weeds and crops is particularly important. Recently, deep learning technology has also been applied to the field of botany, and achieved good results. Convolutional neural networks are widely used in deep learning because of their excellent classification effects. The purpose of this article is to find a new method of plant seedling classification. This method includes two stages: image segmentation and image classification. The first stage is to use the improved U-Net to segment the dataset, and the second stage is to use six classification networks to classify the seedlings of the segmented dataset. The dataset used for the experiment contained 12 different types of plants, namely, 3 crops and 9 weeds. The model was evaluated by the multi-class statistical analysis of accuracy, recall, precision, and F1-score. The results show that the two-stage classification method combining the improved U-Net segmentation network and the classification network was more conducive to the classification of plant seedlings, and the classification accuracy reaches 97.7%.

Sign in / Sign up

Export Citation Format

Share Document