scholarly journals Experimental Studies of the Evaporation of Pure Liquid Droplets in a Single-Axis Non-Resonant Levitator

2021 ◽  
Vol 14 (2) ◽  
Energies ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 6150
Author(s):  
Svetlana Kropotova ◽  
Pavel Strizhak

The article presents the results of theoretical and experimental studies of coalescence, disruption, and fragmentation of liquid droplets in multiphase and multicomponent gas-vapor-droplet media. Highly promising approaches are considered to studying the interaction of liquid droplets in gaseous media with different compositions and parameters. A comparative analysis of promising technologies is carried out for the primary and secondary atomization of liquid droplets using schemes of their collision with each other. The influence of a range of factors and parameters on the collision processes of drops is analyzed, in particular, viscosity, density, surface, and interfacial tension of a liquid, trajectories of droplets in a gaseous medium, droplet velocities and sizes. The processes involved in the interaction of dissimilar droplets with a variable component composition and temperature are described. Fundamental differences are shown in the number and size of droplets formed due to binary collisions and collisions between droplets and particles at different Weber numbers. The conditions are analyzed for the several-fold increase in the number of droplets in the air flow due to their collisions in the disruption mode. A technique is described for generalizing and presenting the research findings on the interaction of drops in the form of theoretical collision regime maps using various approaches.


1952 ◽  
Vol 5 (4) ◽  
pp. 618
Author(s):  
RG Wylie

In order to calculate the probabilities of nucleation of liquid droplets at different types of site on a solid surface, the properties of embryonic droplets which may exist in complete thermodynamic equilibrium at those sites must be known. The general properties of liquid embryos formed on a plane solid surface, or at lines or points of intersection of plane solid surfaces, are considered. It is shown that, although an edge free energy associated with the boundary line may substantially affect the properties -of embryos at small contact angles, the effect is probably not large, for embryos of the sizes of interest, when the contact angle is larger than about π/4. The areas, volumes, total surface free energies, and free energies of formation are found for embryos at these sites as functions of the contact angle, any edge free energies being neglected. The extension to the formation of bubbles at plane solid surfaces in a pure liquid is indicated. The results are applied in a following paper to the kinetics of condensation of a vapour at an imperfect crystalline surface.


Materials ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 944
Author(s):  
Jinsong Zhang ◽  
Chao Wang ◽  
Xianfeng Liu ◽  
Chunming Yi ◽  
Z. L. Wang

The formations of micro-droplets are strongly influenced by the local geometries where they are generated. In this paper, through experimental research, we focus on the roles of microchannel tapering in the liquid paraffin/ethanol coaxial flows in their flow patterns, flow regimes, and droplet parameters, i.e., their sizes and forming frequencies. For validity, the non-tapering coaxial flows (the convergence angle α = 0 ∘ ) are investigated, the experimental methods and experimental data are examined and analyzed by contrasting the details with previous works, and consistent results are obtained. We consider a slightly tapering microchannel (the convergence angle α = 2.8 ∘ ) and by comparison, the experiments show that the tapering has significant effects on the flow patterns, droplet generation frequencies, and droplet sizes. The regimes of squeezing, dripping, jetting, tubing, and threading are differentiated to shrink toward the coordinate origin of the C a c – W e d space. The closer it is to the origin, the less variations will occur. For the adjacent regimes of the origin, i.e., dripping and squeezing, slight changes have occurred in both flow patterns, as well as the droplet characters. In the dripping and squeezing modes, the liquid droplets are generated near the orifice of the inner tube. Their forming positions (geometry) and flow conditions are almost the same. Therefore, the causes of minute changes in such regimes are physically understandable. While in the jetting regimes, the droplets shrink in size and their forming frequencies increase. The droplet sizes and the frequencies are both linearly related to those of the non-tapering cases with the corresponding relations derived. Furthermore, the threading and the tubing patterns almost did not emerged in the non-tapering data, as it seemed easier to form elongated jets, thinning or widening, in the tapered tubes. This can be explained by the stable analysis of the coaxial jets, which indicates that the reductions in the microchannel diameters can suppress the development of the interface disturbances.


Soft Matter ◽  
2019 ◽  
Vol 15 (10) ◽  
pp. 2135-2139 ◽  
Author(s):  
Yanqing Wen ◽  
Paul Y. Kim ◽  
Shaowei Shi ◽  
Dong Wang ◽  
Xingkun Man ◽  
...  

The evaporating liquid droplets on a surface move from the high evaporation side to the low evaporation side.


2021 ◽  
Vol 176 (6) ◽  
Author(s):  
Alexander Borisov ◽  
Ilya V. Veksler

AbstractSilicate liquid immiscibility leading to formation of mixtures of distinct iron-rich and silica-rich liquids is common in basaltic and andesitic magmas at advanced stages of magma evolution. Experimental modeling of the immiscibility has been hampered by kinetic problems and attainment of chemical equilibrium between immiscible liquids in some experimental studies has been questioned. On the basis of symmetric regular solutions model and regression analysis of experimental data on compositions of immiscible liquid pairs, we show that liquid–liquid distribution of network-modifying elements K and Fe is linked to the distribution of network-forming oxides SiO2, Al2O3 and P2O5 by equation: $$\log K_{{\text{d}}}^{{\text{K/Fe}}} = \, 3.796\Delta X_{{{\text{SiO}}_{2} }}^{{{\text{sf}}}} + \, 4.85\Delta X_{{{\text{Al}}_{2} {\text{O}}_{3} }}^{{{\text{sf}}}} + \, 7.235\Delta X_{{{\text{P}}_{2} {\text{O}}_{5} }}^{{{\text{sf}}}} - \, 0.108,$$ log K d K/Fe = 3.796 Δ X SiO 2 sf + 4.85 Δ X Al 2 O 3 sf + 7.235 Δ X P 2 O 5 sf - 0.108 , where $$K_{{\text{d}}}^{{\text{K/Fe}}}$$ K d K/Fe is a ratio of K and Fe mole fractions in the silica-rich (s) and Fe-rich (f) immiscible liquids: $$K_{d}^{{\text{K/Fe}}} = \, \left( {X_{{\text{K}}}^{s} /X_{{\text{K}}}^{f} } \right)/ \, \left( {X_{{{\text{Fe}}}}^{s} /X_{{{\text{Fe}}}}^{f} } \right)$$ K d K/Fe = X K s / X K f / X Fe s / X Fe f and $$\Delta X_{{\text{i}}}^{sf}$$ Δ X i sf is a difference in mole fractions of a network-forming oxide i between the liquids (s) and (f): $$\Delta X_{i}^{sf} = X_{i}^{s} - X_{i}^{f}$$ Δ X i sf = X i s - X i f . We use the equation for testing chemical equilibrium in experiments not included in the regression analysis and compositions of natural immiscible melts found as glasses in volcanic rocks. Departures from equilibrium that the test revealed in crystal-rich multiphase experimental products and in natural volcanic rocks imply kinetic competition between liquid–liquid and crystal–liquid element partitioning. Immiscible liquid droplets in volcanic rocks appear to evolve along a metastable trend due to rapid crystallization. Immiscible liquids may be closer to chemical equilibrium in large intrusions where cooling rates are lower and crystals may be spatially separated from liquids.


2016 ◽  
Vol 794 ◽  
pp. 200-232 ◽  
Author(s):  
A. D. Eales ◽  
N. Dartnell ◽  
S. Goddard ◽  
A. F. Routh

For the fabrication of P-OLED displays, using inkjet printing, it is important to control the final shape resulting from evaporation of droplets containing polymer. Due to peripheral pinning and consequent outward capillary flow, a ring-like final shape is typically observed. This is often undesirable, with a spatially uniform film usually required. Several experimental studies have shown that binary liquid inks can prevent ring formation. There is no consensus of opinion on the mechanism behind this improvement. We have developed a model for the drying of thin, binary liquid droplets, based on thin-film lubrication theory, and we solve the governing equations to predict the final shape. White-light interferometry experiments are conducted to verify the findings. In addition, we present the results of a linear stability analysis that identifies the onset of an instability driven by a difference in surface tension. If the more volatile liquid is more abundant, an instability becomes increasingly likely.


Author(s):  
B. Acharya ◽  
S. Dessiatoun ◽  
A. Shooshtari ◽  
J. Fody ◽  
M. M. Ohadi

Experimental studies were undertaken to investigate separation of fine water particles from a stream of air-water droplet mixture using the electrohydrodynamic (EHD) effect. Air-water droplets mixture flows through a prototype consisting of 7 tubes arranged in a circular pattern which is enclosed in bigger tube. Wire electrodes placed in the center of each tube were charged with DC high-voltage. Corona discharge resulted from the application of high-voltage. Corona generated by the wires gave rise to the EHD effect, causing the water particles to move radially outwards towards the sides of the tube, where they were collected from specially designed beveled holes on the bottom. Near complete separation was achieved with 38W power input requirement for air-flows up to 303 CFM with 0.079 gpm water input. The pressure drop across the system was seen to be only 5.4 Pa.


Author(s):  
Shoubo Wang ◽  
Luis E. Gomez ◽  
Ram S. Mohan ◽  
Ovadia Shoham ◽  
Gene E. Kouba

Abstract Gas-Liquid Cylindrical Cyclone (GLCC©1) separators are becoming increasingly popular as attractive alternatives to conventional separators as they are simple, less expensive, have low-weight, and require little maintenance. However, present studies focus on GLCC designs and applications at relatively lower gas velocities (below the minimum velocity for onset of liquid carry-over in the form of mist flow). With appropriate modifications GLCCs can be used for wet gas and high gas oil ratio (GOR) applications, characterized by higher gas velocities, to knock out the liquid droplets from the gas core. The objectives of this study are to design a novel GLCC capable of separating liquid from a wet gas stream; conduct experimental investigations to evaluate the GLCC performance improvement in terms of operational envelope for liquid carryover; and, measure the liquid extraction from the gas stream. Specific design guidelines for wet gas GLCC are also formulated based on the experimental studies. This investigation provides new capabilities for compact separators for wet gas and high GOR (exceeding 90%) applications.


2018 ◽  
Vol 28 (6) ◽  
pp. 382-388 ◽  
Author(s):  
Nabil Rafidi ◽  
Fredrik Brogaard ◽  
Lei Chen ◽  
Rikard Håkansson ◽  
Ali Tabikh

2019 ◽  
Vol 62 (6) ◽  
pp. 1683-1687
Author(s):  
Scott L. Post

Abstract. For more than 20 years, air-induction or air-inclusion (AI) nozzles have had increased use for pesticide application due to their drift reduction capabilities. The pressure drop created by the pre-orifice and the venturi chamber results in a slower-moving liquid sheet exiting the main orifice, which in turn results in larger droplet sizes, which are less prone to drift. However, two additional factors somewhat mitigate the advantage of larger droplets from AI nozzles: the lower initial spray jet momentum from AI nozzles (compared to standard nozzles of the same flow rating at the same pressure) means that droplets from AI nozzles are more affected by lateral crosswind, and the lower effective liquid density of droplets from AI nozzles due to the presence of air inclusions means that AI droplets are more affected by aerodynamic drag than pure liquid droplets of comparable sizes from standard nozzles. In this work, theoretical and numerical models are developed to quantify these effects and develop tools for accurate drift prediction from sprayers using AI nozzles. The reduction in spray density due to the presence of air inclusions is in the range of 12% to 36%. This reduction in density affects the aerodynamic drift of the spray droplets, with the result that a droplet with 30% air inclusions would have the drift characteristics of a normal droplet with 20% smaller diameter. HighlightsSprays from air induction (AI) nozzles typically contain 12% to 36% air inclusions by volume.A droplet with 30% air inclusions would have the same drift characteristics as a water droplet of 20% smaller diameter.An analytical model is developed to predict the drift distances of small droplets. Keywords: Air induction, Droplet size, Nozzles, Pesticides, Sprayers.


Sign in / Sign up

Export Citation Format

Share Document