Evaluation of tendering effect from date seed extract (P. dactalytera) in knuckle part meat

2021 ◽  
Vol 6 (1) ◽  
pp. 23-26
Author(s):  
Maryana Mohamad Nor ◽  
Lukman Ismail ◽  
Siti Nuurul Huda Mohammad Azmin ◽  
Ikhmal Hisham Abdul Halim
Keyword(s):  
Sensory Evaluation ◽  
Aqueous Extract ◽  
Animal Feed ◽  
Ph Value ◽  
Total Yield ◽  
Chemical Properties ◽  
Positive Control ◽  
Date Seed ◽  
Physico Chemical ◽  
Cooked Meat

Phoenic dactylifera (date) is a species of flowering plants in the family of Arecaceae. Date seeds are considered as a waste from many processing that produced plants pitted date, confectionery date syrup and date itself. Currently, the seeds are used mainly for animal feed in the cattle and chicken industry. In 2004, about 863,000 tonnes of date seeds are produced out of 6.9 million tonnes date. Tenderness is the major concern that affecting consumer acceptance of beef in meat industry. This study was carried out in order to investigate the effects of the bioactive compound extracted from date seed as a tenderizing agent in meat. Extraction of date seeds used a different method of extraction (Soxhlet and Maceration). The application of extracted on knuckle part of beef were performed and papain was used as a positive control and followed by the sensory evaluation. The analysis of cooked meat was performed in order to analyze the physico-chemical properties of date seeds extract. The result from the study revealed that the aqueous extract (maceration techniques) gave the best percentage of the total yield recovery with 28.44%. The physico-chemical properties of cooked meat showed the reducing of pH value after cooking. Meanwhile for the cooking yield, result showed that almost 86% of water losses during cooking for aqueous extract and positive control and 96% for negative control. According to the sensory evaluation of the cooked meat, scoring test and hedonic test were performed using One Way Anova. The result for texture is 6.10±2.1, juiceness is 5.87±1.76 and taste is 6.80±1.34. All attributes have no significant different at p <0.05 between aqueos extract, and positive control. A general acceptance shows that no significant different between aqueos extract (6.50±2.0) and positive control (7.13±1.98). The result suggested that the tenderization effect of date seed improved the textural properties of knuckle part meat and have potential for tenderization purpose in food industry.

KARAKTERISASI SIFAT FISIKA DAN KIMIA CUKA KAYU DARI TANDAN KOSONG KELAPA SAWIT

2014 ◽  
Vol 6 (1) ◽  
pp. 35 ◽  
Author(s):  
Rizka Karima
Keyword(s):  
Specific Gravity ◽  
Physical Properties ◽  
Solid Waste ◽  
Ph Value ◽  
Total Yield ◽  
Chemical Properties ◽  
Phenol Content ◽  
Empty Fruit Bunches ◽  
Wood Vinegar ◽  
And Chemical Properties

There’s so many pal solid waste or palm empty fruit bunches, but the utilization is not maximized, this research its to optimized utilization of palm solid waste to be wood vinegar and want to know the composition physical properties and chemical properties of wood vinegar from palm empty fruit bunches. Total yield of wood vinegar from palm empty fruit bunches its 15,94 % and total yield of charcoal its 64,58 %. GCMS result showing chemical properties from wood vinegar of burning < 100oC its obtained 19 compound and burning >100 oC its obtained 6 compound. The result physichal properties testing from crued wood vinegar its obtained specific gravity 1,0005 and 1,0010, pH value are 3,233 and 3,186, TAT content are 9,36 % and 11,12 %, phenol content its 0,44 %. The result physical properties testing from wood vinegar which has decolorizatin by activated carbon its obtained specific gravity are 0,9987 and 0,999, pH value are 3,036 and 3,012, TAT content are 8,29 % and 9,27 % and phenol content its 0,01 %.Keywords: palm bunches, wood vinegar, liquid smoke

scholarly journals Pollution Scenario due to Discharge of Effluent from Agrochemicals and Pesticides Manufacturing Industries of Dombivali Industrial Belt of Mumbai, India

2013 ◽  
Vol 22 ◽  
pp. 8-15
Author(s):  
P.U. Singare ◽  
S.S. Dhabarde
Keyword(s):  
Heavy Metals ◽  
Ph Value ◽  
Winter Season ◽  
Chemical Properties ◽  
Total Solid ◽  
Average Concentration ◽  
Summer Season ◽  
Manufacturing Industries ◽  
Toxic Heavy Metals ◽  
Physico Chemical

The paper deals with monitoring of pollution arising due to agrochemicals and pesticides manufacturing industries located along the Dombivali industrial belt of Mumbai, India. The study was carried for the period of one year from June, 2012 to May, 2013 to study the level of toxic heavy metals and the physico-chemical properties of waste water effluents discharged from the above industries. The average concentration of Cu, Ni, Cr, Pb and Zn was found to be maximum of 29.86, 0.90, 1.16 and 1.19 ppm respectively in summer season, while average Fe concentration was maximum of 51.10 ppm in winter season. The average pH value of the effluent was found to be maximum of 12.95 in summer season, while average conductivity value was maximum of 21085 µmhos/cm in rainy season. The majority of physco-chemical parameters like alkalinity, hardness, salinity, chloride, cyanide, phosphate, total solid, BOD and COD content were found to be maximum in summer season having the average values of 1918, 186, 4, 11.20, 0.07, 81, 6391, 685 and 2556 ppm respectively. The average DO content was found to be low of 4.5 ppm in winter season. It was observed that the concentration level of majority of the toxic heavy metals and physico-chemical properties were above the tolerable limit set for inland surface water. The results of present study indicates that the existing situation if mishandled can cause irreparable ecological harm in the long term well masked by short term economic prosperity due to extensive industrial growth

scholarly journals Development of Healthy Snack from Sa-med Mushroom (Boletus griseipurpureus Corner)

2020 ◽  
Vol 17 (11) ◽  
pp. 1157-1167
Author(s):  
Chanakan KHEMTHONG ◽  
Rungrat CHAMCHAN ◽  
Uthaiwan SUTTISUNSANEE ◽  
Somsri CHAROENKIATKUL ◽  
Chaowanee CHUPEERACH ◽  
...  
Keyword(s):  
Angiotensin Converting Enzyme ◽  
Sensory Evaluation ◽  
Antioxidant Activities ◽  
Chemical Properties ◽  
Converting Enzyme ◽  
High Fiber ◽  
Low Sodium ◽  
Physico Chemical ◽  
Inhibitory Activities ◽  
Alpha Glucosidase

This study investigated alpha-glucosidase and angiotensin-converting enzyme inhibitory activities of Sa-med mushroom powder. Healthy snack had been developed by varying 3 levels of Sa-med mushroom powder at 10, 12 and 14 % (w/w) and determined its physico-chemical properties and sensory evaluation. The results showed that anti-alpha-glucosidase activity and anti-angiotensin-converting activities of Sa-med mushroom powder were at 59 and 93 %, respectively. As the results of healthy snack, lightness (L*) and extended ratio were decreased, but redness (a*) and bulk density were increased with higher amounts of Sa-med mushroom powder in the formulation (p < 0.05). However, hardness and crispiness were not significantly different. For sensory evaluation, healthy snack with 14 % Sa-med mushroom powder had the highest overall liking score of 7.6 (like moderately to like very much). Finally, the nutritional values of developed snack revealed that protein and fiber were increased by 3 and 18 times, while carbohydrate was decreased by 15 %. In addition, the mushroom snack could be claimed as a “source of protein”, “high fiber” and “low sodium”. This snack also had phenolic compounds, antioxidant activities and alpha-glucosidase, and angiotensin-converting enzyme inhibitory activities. According to consumer acceptability test (n = 300), the acceptability level was 95 %, in which around 64 % of the subjects were interested in buying the product.

scholarly journals Physico-chemical properties of Dhepa River in Dinajpur District of Bangladesh

2015 ◽  
Vol 6 (1) ◽  
pp. 59-67
Author(s):  
K Rakiba ◽  
Z Ferdoushi
Keyword(s):  
Water Quality ◽  
Dissolved Oxygen ◽  
Ph Value ◽  
Sampling Site ◽  
Chemical Properties ◽  
Quality Parameters ◽  
P Concentration ◽  
Physical Chemical ◽  
Physico Chemical ◽  
Buffer Condition

Among different water quality parameters dissolved oxygen, transparency, pH, PO4-P and depth varied significantly among the sampling sites. The pH value in the present investigation remained a buffer condition (6.50- 7.90). Dissolved oxygen was ranges from 3.80 to 11.60 mg/l throughout the study periods. PO4-P concentration was observed highest (0.30 mg/l) in sampling site 2. On the basis of physical, chemical aspects sampling site 3 and sampling site 5 (situated in gosaipur and chandandoho) found in better condition in terms of limnological aspects. However, it could be concluded that Dhepa River will play important role in riverine fisheries and for further fisheries management.DOI: http://dx.doi.org/10.3329/jesnr.v6i1.22041 J. Environ. Sci. & Natural Resources, 6(1): 59-67 2013

Effect of date varieties on physico-chemical properties, fatty acid composition, tocopherol contents, and phenolic compounds of some date seed and oils

2018 ◽  
Vol 42 (4) ◽  
pp. e13584 ◽  
Author(s):  
Fahad Al Juhaimi ◽  
Mehmet Musa Özcan ◽  
Oladipupu Q. Adiamo ◽  
Omer N. Alsawmahi ◽  
Kashif Ghafoor ◽  
...  
Keyword(s):  
Fatty Acid Composition ◽  
Fatty Acid ◽  
Phenolic Compounds ◽  
Acid Composition ◽  
Chemical Properties ◽  
Date Seed ◽  
Physico Chemical

scholarly journals The influence of the freezing rate on the physico-chemical properties of pork meat (M. Longissimus dorsi)

2019 ◽  
pp. 228-235
Author(s):  
Danica Savanovic ◽  
Radoslav Grujic ◽  
Jovo Savanovic
Keyword(s):  
Water Content ◽  
Ph Value ◽  
Chemical Properties ◽  
Storage Period ◽  
Freezing Rate ◽  
Longissimus Dorsi ◽  
Pork Meat ◽  
Physico Chemical ◽  
Meat Samples ◽  
Water Holding

The meat freezing, as a method of preservation, aims to maximize the storage period with preserving the quality and nutritional value of the product. However, freezing causes certain changes in the foodstuff. These changes are the result of ice formation and lead to a change in meat quality after thawing. The aim of this paper was to examine the effect of freezing rates on the physicochemical properties of pork meat (M. Longissimus dorsi). The meat samples were frozen at 10 different rates and after 24 hours of storage at -18?C, thawed at +4?C. Samples frozen at the lowest freezing rate (0.23 cm/h) had the lowest water content (72.02%), while for the samples frozen at the highest rate (1.43 cm/h), significantly higher (p<0.05) water content was recorded (73.85%). The protein content ranged from 23.34% (rate 0.50 cm/h) to 23.76% (rate 1.43 cm/h). The increase in freezing rates from 0.23 cm/h to 1.43 cm/h statistically significantly (p<0.05) affected the increase in the pH value (from 5.41 to 5.72). By measuring water holding capacity (WHC) the least amounts of released liquid (2.27 cm2 and 2.23 cm2) were recorded at higher freezing rate (1.00 cm/h and 1.43 cm/h, respectively). The highest thawing loss was determined in pork samples frozen at slower rate (0.23 cm/h) (3.61%).

scholarly journals Nutritional, Physico-Chemical and Mechanical Characterization of Vegetable Fibers to Develop Fiber-Based Gel Foods

Foods ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 1017
Author(s):  
Ana Teresa Noguerol ◽  
Marta Igual ◽  
M. Jesús Pagán-Moreno
Keyword(s):  
Ph Value ◽  
Chemical Properties ◽  
Absorption Capacity ◽  
Gelling Agent ◽  
Water Retention Capacity ◽  
Physical Parameters ◽  
Hydration Properties ◽  
Retention Capacity ◽  
Vegetable Fibers ◽  
Physico Chemical

The aim of this research was to evaluate the nutritional and physico-chemical properties of six different vegetable fibers and explore the possibility of using them as a thickener or gelling agent in food. To determine the technological, nutritional and physical parameters, the following analyses were carried out: water-holding capacity, water retention capacity, swelling, fat absorption capacity, solubility, particle size, moisture, hygroscopicity, pH, water activity, bulk density, porosity, antioxidant activity, phenolic compounds and mineral content. Gels were prepared at concentrations from 4% to 7% at 5 °C and analyzed at 25 °C before and after treatment at 65 °C for 20 min. A back extrusion test, texture profile analysis and rheology were performed and the pH value, water content and color were analyzed. As a result, all the samples generally showed significant differences in all the tested parameters. Hydration properties were different in all the tested samples, but the high values found for chia flour and citrus fiber are highlighted in functional terms. Moreover, chia flour was a source of minerals with high Fe, Mn and Cu contents. In gels, significant differences were found in the textural and rheological properties among the samples, and also due to the heat treatment used (65 °C, 20 min). As a result, chia flour, citrus, potato and pea fibers showed more appropriate characteristics for thickening. Moreover, potato fiber at high concentrations and both combinations of fibers (pea, cane sugar and bamboo fiber and bamboo, psyllium and citric fiber) were more suitable for gelling agents to be used in food products.

scholarly journals Effects of pandan aqueous extract on physico-chemical properties of normal and waxy rice starches

2018 ◽  
Vol 192 ◽  
pp. 03026
Author(s):  
Pawinee Deetae ◽  
Thungpon Klumrat ◽  
Warot Nakakitwibool ◽  
Atikorn Panya
Keyword(s):  
Aqueous Extract ◽  
Chemical Properties ◽  
Pasting Properties ◽  
Food Additive ◽  
Rice Starch ◽  
Physico Chemical ◽  
Waxy Rice ◽  
Pasting Temperature ◽  
Thermal Stability Of ◽  
Waxy Rice Starch

Pandan aqueous extract (PAE) has traditionally been used as a food additive in Southeast Asia to enhance their flavor, color and health benefits. The purpose of this research was to investigate the effects of PAE on physico-chemical properties of normal rice starch (NRS) and waxy rice starch (WRS). Results indicate that addition of PAE significantly (p < 0.05) affected the physico-chemical properties of rice starches. For pasting properties, PAE significantly increased peak viscosity, breakdown and pasting temperature of NRS, while PAE decreased peak viscosity, breakdown, final viscosity and setback values of WRS. The addition of PAE to NRS and WRS significantly (p < 0.05) reduced gel hardness and gel adhesiveness by more than 50% compare to native control gels. The gelatinization thermal properties of both NRS and WRS were significantly (p < 0.05) increased when PAE was included. Only the gelatinization enthalpy of WRS was influence by the PAE. It was concluded that the addition of PAE considerably improved the thermal stability of WRS.

Sign in / Sign up

Export Citation Format

Share Document