scholarly journals Reliability of Two Color Selection Devices in Matching and Measuring Tooth Color

2011 ◽  
Vol 12 (1) ◽  
pp. 19-23 ◽  
Author(s):  
Carmen Llena ◽  
Esther Lozano ◽  
Jose Amengual ◽  
Leopoldo Forner
Keyword(s):  
Correlation Coefficient ◽  
Clinical Significance ◽  
Color Measurement ◽  
Tooth Color ◽  
B Values ◽  
Color Selection ◽  
Color Changes ◽  
Measurement Devices ◽  
Shade Guide ◽  
Paired T Test

ABSTRACT Objective The objective of this study was to investigate the intra and interdevice reliability of two tooth color measurement devices: EasyShade (ES) and SpectroShade Micro (SSM). Materials and methods Tooth color was measured in six maxillary and mandibular. L*, a* and b* values and shade matches to VITA Classical and Vitapan 3D-Master shade guide systems were determined for all teeth. ÄE was assessed. Paired t-test and correlation coefficient (ICC) were used. Results Intradevices no significant differences (p > 0.05) were found between L*, a*, b*. Interdevice L* and b* were significantly higher for ES (p < 0.05), while a* was significantly higher for SSM (p < 0.05). ÄE showed no significant interdevice difference (p > 0.05). Intradevices ICC values were higher for ES but not significant (p > 0.05). Discussion The null hypotheses that they present no differences in their color measuring within devices or shade systems is accepted, but the results allow to reject the null hypotheses that they present no differences in their color measuring or shade systems between devices. Conclusion Both EasyShade (ES) and SpectroShade Micro (SSM) show excellent repeatability and so they can be used in office to evaluate tooth color or to assess color changes after treatment. Clinical significance Dental color can be diagnosed using dental spectrophotometers, allowing to detect in an objective way therapeutic dental color changes. How to cite this article Llena C, Lozano E, Amengual J Forner L. Reliability of Two Color Selection Devices in Matching and Measuring Tooth Color. J Contemp Dent Pract 2011; 12(1):19-23.

Correlation Among Methods to Measure Tooth Color in Clinical Trials Evaluating Tooth Bleaching

2019 ◽  
Vol 1 (1) ◽  
pp. 46-52 ◽  
Author(s):  
André Luis Faria-e-Silva
Keyword(s):  
Repeated Measures ◽  
Color Change ◽  
Correlation Coefficients ◽  
Wilcoxon Test ◽  
Tooth Bleaching ◽  
Color Measurement ◽  
Tooth Color ◽  
Color Changes ◽  
Assessment Time ◽  
Shade Guide

<P>Objective: This study aimed to assess possible differences in results provided by two shade guides and a spectrophotometer used to measure the color changes during tooth bleaching. </P><P> Methods: Fifty-six patients underwent two sessions of in-office tooth bleaching with a 35% hydrogen peroxide with a week of an interval between them. The color evaluation was performed using shade match with two guide scales (Vita Classical, and Vita Bleach Guide) and a spectrophotometer providing CieLab data. The color was assessed at baseline and 7 days after each session, and 30 days after the last session. Data from scales were arranged in scores according to lightness (lowest to highest) and the color changes were calculated based on baseline data. For CieLab data, &#916;L, &#916;a, &#916;b, and &#916;E were calculated for each assessment time. Differences between the color changes observed in each session were assessed by Wilcoxon test (&#945; = 0.05). Friedman`s test and One-way repeated measures ANOVA were used to analyze color changes among the assessment times. Spearman`s test was used to evaluate the correlation between the shade guide scores and data from Cielab. </P><P> Results: All methods of color measurement demonstrated any additional effect of second bleaching session on color change, and stable color after 30 days (p < 0.001 for all methods). Both shade guide scales presented low correlation coefficients with &#916;L, and moderate coefficients with &#916;b, Δa, and &#916;E. </P><P> Conclusion: Despite the weak/ moderate correlation among the methods used to measure tooth color, all methods showed similar results of tooth bleaching effectiveness.</P>

In Vitro Evaluation of New Dental Software for Shade Matching

2013 ◽  
Vol 587 ◽  
pp. 360-365
Author(s):  
Bogdan Culic ◽  
Vasile Prejmerean ◽  
Cristina Gasparik ◽  
Carina Culic ◽  
Cristian Dragos ◽  
...  
Keyword(s):  
Color Space ◽  
Computer Software ◽  
Tooth Color ◽  
B Values ◽  
Color Selection ◽  
Statistical Indicator ◽  
Lab Color Space ◽  
Shade Matching ◽  
Cie Lab

In this study we evaluate a new computer software developed for determining tooth color parameters obtained from digital images taken in a general practice working conditions. In order to evaluate the accuracy of the program, we used as samples dental shade tabs. The tabs were measured using a dental spectrophotometer, and then photographed and measured using our program (Toodent). L, a, b values of the CIE Lab color space were obtained. The results were also automatically expressed in dental shade tab code. The results analysis was made by comparing the L, a, b values obtained by the program, with spectrophotometer ones taken from the same shade tab. A statistical indicator was created in order to evaluate the accuracy of the program. Further evaluation of the program shall be made, in order to be used in routine clinical color selection.

scholarly journals Comparison between Color Spaces of Vita Lumin Shade Guide with Natural Teeth in Bengaluru Population using Spectrocolorimeter: An in vivo Study

2017 ◽  
Vol 18 (8) ◽  
pp. 683-687
Author(s):  
Deepak Mehta ◽  
Nishant Gupta ◽  
Rohit M Shetty ◽  
Adarsh N Bhat ◽  
Gopalakrishna Srivatsa ◽  
...  
Keyword(s):  
Local Population ◽  
Color Space ◽  
Color Measurement ◽  
Color Spaces ◽  
B Values ◽  
Natural Teeth ◽  
Shade Matching ◽  
Shade Guide ◽  
Shade Selection

ABSTRACT Aim The aim of this study is to compare the color space of Vita Lumin shade guide (SG) with the natural teeth of the local population. Materials and methods A total of 100 maxillary central incisors (100 patients) were subjected to color measurement with a spectrocolorimeter. For each tooth, L*, a*, b* values were recorded. All the shade tabs of Vita Lumin SG were analyzed with a spectrocolorimeter to define the color space covered by the Vita Lumin SG. The L*a*b* values of natural teeth were plotted on separate scattered diagrams and compared. Results About two out of three attributes (luminance and blue spectrum) of the local population of Bengaluru displayed a broader range than those available in Vita Lumin SG. Conclusion The local population requires an SG with an extended range, covering a higher luminance spectrum and broader blue spectrum. Clinical significance Esthetic restorations require accurate shade matching with the adjacent natural teeth, SGs being the mean of shade selection and communication should be comparable to the natural teeth. How to cite this article Shetty RM, Bhat AN, Gupta N, Mehta D, Srivatsa G, Singh I. Comparison between Color Spaces of Vita Lumin Shade Guide with Natural Teeth in Bengaluru Population using Spectrocolorimeter: An in vivo Study. J Contemp Dent Pract 2017;18(8):683-687.

scholarly journals The reproducibility of electronic color measurements of the marginal gingiva

2020 ◽  
Vol 25 (1) ◽  
pp. 145-150
Author(s):  
Henning Staedt ◽  
Eva Mally ◽  
Herbert Scheller ◽  
Stefan Wentaschek ◽  
Peer Wolfgang Kämmerer ◽  
...  
Keyword(s):  
Color Difference ◽  
Color Measurement ◽  
Tooth Color ◽  
Color Coordinates ◽  
Measurement Systems ◽  
Color Determination ◽  
Determination System ◽  
The Mean ◽  
Measurement Devices

Abstract Introduction This study evaluated the reproducibility of electronic color determination system evaluations of the marginal gingiva, which could be important for adhesive cervical fillings or prosthetic restorations that imitate the gingiva. Material and methods In 50 subjects, the L*, a*, and b* color coordinates were evaluated five times at a point in the marginal area of a central incisor using different electronic color determination systems: (SP) Shadepilot, (ES) Easyshade, (CE) Crystaleye, and (SV) X-Rite. The mean color difference (ΔE) and its standard deviation between the five measurements from each participant were calculated separately for each device. Further ICC for interdevice reliability was determined. Results The L*, a*, and b* color coordinates and ΔE values differed significantly among the systems (p < 0.001). Within each patient and measurement system, ΔE ranged from 1.4 to 3.2 (SD 1.1–2.5), L* from 2.6 to 5.7 (SD 2.6–5.7), a* from 11.9 to 21.3 (SD 3.6–3.9), and b* from 15.1 to 28.9 (SD 1.7–4.3). Interdevice reliability ranged between 0.675 and 0.807. Conclusions Color determination of the marginal gingiva using the electronic tooth color determination systems tested herein showed limited reproducibility. The results obtained with the different measurement systems differed enormously. Clinical relevance These results show that the electronic color measurement devices tested allow no high reproducible determination of color coordinates of the marginal gingiva.

scholarly journals Impact of Microabrasion on the Effectiveness of Tooth Bleaching

2017 ◽  
Vol 28 (5) ◽  
pp. 612-617 ◽  
Author(s):  
Camila Evelyn Perete-de-Freitas ◽  
Paula Damasceno Silva ◽  
André Luis Faria-e-Silva
Keyword(s):  
Hydrogen Peroxide ◽  
Color Change ◽  
T Test ◽  
Tooth Bleaching ◽  
Repeated Measure ◽  
Tooth Color ◽  
Color Changes ◽  
Bleaching Procedure ◽  
To Receive ◽  
Paired T Test

Abstract The aim of the present study was to evaluate the effect of prior microabrasion on the teeth color change and tooth bleaching effectiveness. Eight sound molars were mesio-distally sectioned and the halves were randomly allocated to receive enamel microabrasion or non-abrasion (control) in one of surfaces (buccal or lingual), while the remaining surface received the other treatment. The tooth color on baseline was evaluated by spectrophotometer (CieL*a*b system). After the microabrasion procedure, the tooth color was measured again. Following, the specimens were bleached with 35% hydrogen peroxide for two sessions with one-week interval. The color was re-evaluated 7 days after each section and 30 days after the second session. The effect of enamel microabrasion on color changes was evaluated by paired T-test. Deltas L*, a*, b*, and E were calculated and data submitted to 2-way repeated measure ANOVA followed by Tukey`s test. Paired T-test was also used to assess possible differences on the ultimate color achieved after tooth bleaching. Enamel microabrasion reduced the lightness and increased the redness of specimens. Specimens that received microabrasion presented higher values of ∆L* than control after each bleaching procedure; and higher ∆a* after the 2nd bleaching session. However, the prior enamel microabrasion did not affect the ultimate values of color parameters. Despite enamel microabrasion have modified the tooth color, this procedure did not affect the ultimate results achieved with tooth bleaching using a high-concentrated hydrogen peroxide.

scholarly journals Effect of Citric Acid on Color Changes of Calcium Silicate-Based Cements an In Vitro Study

2021 ◽  
Vol 11 (5) ◽  
pp. 2339
Author(s):  
Joanna Metlerska ◽  
Till Dammaschke ◽  
Mariusz Lipski ◽  
Irini Fagogeni ◽  
Anna Machoy-Mokrzyńska ◽  
...  
Keyword(s):  
Citric Acid ◽  
Calcium Silicate ◽  
In Vitro Study ◽  
Vitro Study ◽  
Color Measurement ◽  
Color Changes ◽  
Naked Eye ◽  
Root Canal Irrigants ◽  
The Difference

The aim of the present in vitro study was to investigate the effects of 10% and 40% citric acid (CA) on the color of calcium silicate–based cements (CSCs) in comparison to the effects of common root canal irrigants. Samples of six CSCs (n = 6)—ProRoot MTA (Dentsply, Tulsa, OK, USA), Biodentine (Septodont, Saint-Maur-des-Fossés, France), MTA Plus (Avalon Biomed Inc, by Prevest Denpro Limited, Jammu, India), MTA Repair HP (Angelus, Londrina, PR, Brazil), Ortho MTA (BioMTA, Seoul, Korea), and Retro MTA (BioMTA, Seoul, Korea)—were immersed in 10% and 40% CA as well as 15% EDTA, 2% NaOCl, 2% CHX, and 0.9% NaCl for 15 min, 1 h, and 24 h. ΔE values, representing the difference between the final and baseline values of the color components, were then determined using a VITA Easyshade Compact 5.0 spectrophotometer. Naked-eye evaluation of the changes in color and structures of the materials was performed using our own scale. Upon immersion of the materials in both 10% and 40% CA, there were statistically significant differences between spectrophotometric color measurement results for all CSCs (P < 0.05). However, CA does not cause dark discoloration, observable with the naked eye, of any of the materials, such as NaOCl and CHX. Significant statistical differences were also found between all CSCs in terms of submersion duration (P < 0.05). CA, which could be an alternative to EDTA use, caused greater CSCs discoloration and changed some of their structures. Unless required by the therapeutic procedure, clinicians should pay attention to the fact that the irrigant may affect the CSCs discoloration and minimize the contact time of irrigant with CSCs.

scholarly journals Tooth discoloration induced by apical plugs with hydraulic calcium silicate-based cements in teeth with open apices—a 2-year in vitro study

2021 ◽  
Author(s):  
Ralf Krug ◽  
C. Ortmann ◽  
S. Reich ◽  
B. Hahn ◽  
G. Krastl ◽  
...  
Keyword(s):  
Calcium Silicate ◽  
In Vitro Study ◽  
Color Difference ◽  
Blood Contamination ◽  
Tooth Color ◽  
Color Changes ◽  
Gutta Percha ◽  
Tooth Discoloration ◽  
Post Hoc

Abstract Objectives To assess tooth discoloration induced by different hydraulic calcium silicate-based cements (HCSCs), including effects of blood and placement method. Materials and methods Eighty bovine teeth cut to a length of 18 mm (crown 8 mm, root 10 mm) were randomly assigned to 10 groups (n = 8), receiving orthograde apical plug treatment (APT). Apical plugs were 4 mm in length and made of ProRoot MTA (Dentsply), Medcem MTA (Medcem), TotalFill BC RRM Fast Set Putty (Brasseler), or Medcem Medical Portland Cement (Medcem) plus bismuth oxide (Bi2O3) with and without bovine blood. Further, orthograde (with or without preoperative adhesive coronal dentin sealing) and retrograde APT were compared. Teeth were obturated with gutta-percha and sealer, sealed with composite and stored in distilled water. Tooth color was measured on apical plug, gutta-percha/sealer, and crown surface before treatment versus 24 h, 1, 3, 6, 12, and 24 months after treatment by spectrophotometry. Color difference (ΔE) values were calculated and analyzed by Shapiro–Wilk test, ANOVA with post hoc tests, Friedman test, t test, and post hoc tests with Bonferroni correction (α = .05). Results Tooth discoloration occurred in all groups with no significant differences between HCSCs (p > .05). After 24 months, color changes were prominent on roots but insignificant on crowns. Blood contamination induced a significantly decreased luminescence (p < .05). Blood had a stronger impact on tooth color than Bi2O3. No relevant effects of retrograde placement (p > .05) or preoperative dentin sealing (p > .05) were detected. Conclusions Apical plugs of the tested HCSCs cause discoloration of bovine roots, but not discoloration of bovine tooth crowns within a 24-month period. Clinical relevance APT should be performed carefully while avoiding direct contact with the coronal dentin, and in that case no aesthetic impairments occur.

scholarly journals Influence of Mechanical and Chemical Degradation in the Surface Roughness, Gloss, and Color of Microhybrid Composites

2017 ◽  
Vol 18 (4) ◽  
pp. 283-288 ◽  
Author(s):  
Cleidiel AA Lemos ◽  
Silvio J Mauro ◽  
Paulo H dos Santos ◽  
André LF Briso ◽  
Ticiane C Fagundes
Keyword(s):  
Surface Roughness ◽  
Clinical Significance ◽  
Composite Resin ◽  
Color Change ◽  
Wilcoxon Test ◽  
Chemical Degradation ◽  
Color Changes ◽  
Final Data ◽  
Properties Of Materials ◽  
Spearman Test

ABSTRACT Aim The aim of this study was to investigate the association of different degradations on the roughness, gloss, and color changes of microhybrid composites. Materials and methods Ten specimens were prepared for Charisma, Amelogen Plus, Point 4, and Opallis resins. Surfaces were polished and baseline measurements of roughness, gloss, and color were recorded. Specimens were then submitted to chemical and mechanical challenges, and the specimens were reevaluated. Roughness and gloss were analyzed by Kruskal – Wallis and Dunn's test (p < 0.05). Color change (ΔE) was analyzed by one-way analysis of variance and Tukey's tests (p < 0.05). The initial and final data were compared using the Wilcoxon test (p < 0.05). Spearman test checked the correlation between the roughness and gloss (p < 0.05). Results Regarding surface roughness and gloss, there was no difference between composites before challenges. However, all composites showed a significant increase of roughness after challenges, with highest values for Charisma. The gloss was influenced by challenges, evidencing the best gloss for Point 4. Charisma showed the highest value of color change. There was no correlation between surface roughness and gloss for the initial analysis, and after the challenges. Conclusion Composites were influenced by association of challenges, and Charisma showed the highest changes for roughness, gloss, and color. Clinical significance The type of composite resin influenced the properties of materials, which are surface roughness, gloss, and color change. The dentist should be aware of the performance of different brands, to choose the correct required composite resin for each type of patient or region to be restored. How to cite this article Lemos CAA, Mauro SJ, dos Santos PH, Briso ALF, Fagundes TC. Influence of Mechanical and Chemical Degradation in the Surface Roughness, Gloss, and Color of Microhybrid Composites. J Contemp Dent Pract 2017;18(4):283-288.

scholarly journals Maxillomandibular Plane Angle Bisector (MM) Adjunctive to Occlusal Plane to evaluate Anteroposterior Measurement of Dental Base

2012 ◽  
Vol 13 (4) ◽  
pp. 539-544
Author(s):  
Chanamallappa R Ganiger ◽  
KU Cariappa ◽  
AR Yusuf Ahammed
Keyword(s):  
Clinical Significance ◽  
Orthodontic Treatment ◽  
Clinical Usefulness ◽  
Occlusal Plane ◽  
Reference Plane ◽  
Plane Angle ◽  
B Values ◽  
Angle Bisector ◽  
Lateral Cephalograms ◽  
Relationship Of

ABSTRACT Aim This study was undertaken to analyze the clinical usefulness of the maxillomandibular bisector, its reproducibility, its validity and its relationship to the functional occlusal plane, the bisecting occlusal plane and the nature of its cant. Materials and methods Thirty pretreatment lateral cephalograms, each of adolescents (above 18 years of age) and children (10- 12 years), seeking orthodontic treatment were randomly selected and the Wits technique of anteroposterior measurement was used to compare A-B values measured to the new plane with those measured to the functional occlusal plane (FOP) and to the traditional or bisecting occlusal plane (BOP). Results Present study showed that MM bisector plane is more reproducible and valid reference plane, than the FOP and BOP. Conclusion A new plane, geometrically derived from the dental base planes, has been tested as an occlusal plane substitute for the measurement of anteroposterior jaw relationships. It lies close to but at an angle and inferior to the traditional occlusal planes and is highly reproducible at all times. Clinical significance Maxillomandibular planes angle bisector may be a useful adjunct for the cephalometric assessment of sagittal relationship of the patient. How to cite this article Ganiger CR, Nayak USK, Cariappa KU, Ahammed ARY. Maxillomandibular Plane Angle Bisector (MM) Adjunctive to Occlusal Plane to evaluate Anteroposterior Measurement of Dental Base. J Contemp Dent Pract 2012; 13(4):539-544.

Sign in / Sign up

Export Citation Format

Share Document