scholarly journals Research on adsorption of Cd2+ by hydroxyapatite/chitosan nanocomposite

2021 ◽  
Vol 10 (2) ◽  
pp. 36-42
Author(s):  
Duyen Le Thi ◽  
Hanh Vo Thi ◽  
Dung Cong Tien ◽  
Thanh Dinh Thi Mai
Keyword(s):  
Experimental Data ◽  
Contact Time ◽  
Room Temperature ◽  
Acetic Acid Solution ◽  
Suitable Condition ◽  
Freundlich Isotherm ◽  
Chemical Precipitation ◽  
Precipitation Method ◽  
Isotherm Models ◽  
Adsorption Efficiency

Hydroxyapatite/chitosan nanocomposite (n-HAp/ChS) was synthesized successfully from 0.5 M Ca(NO3)2 + 5 % chitosan/2 % acetic acid solution and 0.3 M (NH4)2HPO4 solution at pH 10-11 using 28 % NH3 solution by chemical precipitation method. n-HAp/ChS was used for the adsorption of Cd2+ from aqueous solution. The effect of factors on the Cd2+ adsorption efficiency and capacity was investigated. The adsorption efficiency and capacity obtained 97,75 % and 58,65 mg/g respectively at suitable condition: pH0 5.9,n-HAp/ChS mass of 0.1 g, initial Cd2+ concentration of 60 mg/L, contact time 40 minutes at room temperature (30oC). The experimental data was described by Langmuir and Freundlich isotherm models.

scholarly journals Equilibrium, Kinetics, and Thermodynamics of the Removal of Nickel(II) from Aqueous Solution Using Cow Hooves

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
I. Osasona ◽  
O. O. Ajayi ◽  
A. O. Adebayo
Keyword(s):  
Aqueous Solution ◽  
Contact Time ◽  
Room Temperature ◽  
Physical Adsorption ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Equilibrium Studies ◽  
Equilibrium Data

The feasibility of using powdered cow hooves (CH) for removing Ni2+ from aqueous solution was investigated through batch studies. The study was conducted to determine the effect of pH, adsorbent dosage, contact time, adsorbent particle size, and temperature on the adsorption capacity of CH. Equilibrium studies were conducted using initial concentration of Ni2+ ranging from 15 to 100 mgL−1 at 208, 308, and 318 K, respectively. The results of our investigation at room temperature indicated that maximum adsorption of Ni2+ occurred at pH 7 and contact time of 20 minutes. The thermodynamics of the adsorption of Ni2+ onto CH showed that the process was spontaneous and endothermic. Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) isotherm models were used to quantitatively analysed the equilibrium data. The equilibrium data were best fitted by Freundlich isotherm model, while the adsorption kinetics was well described by pseudo-second-order kinetic equation. The mean adsorption energy obtained from the D-R isotherm revealed that the adsorption process was dominated by physical adsorption. Powdered cow hooves could be utilized as a low-cost adsorbent at room temperature under the conditions of pH 7 and a contact time of 20 minutes for the removal of Ni(II) from aqueous solution.

scholarly journals Removal of Methyl Violet 2B from Aqueous Solution Using Casuarina equisetifolia Needle

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Muhammad Khairud Dahri ◽  
Muhammad Raziq Rahimi Kooh ◽  
Linda B. L. Lim
Keyword(s):  
Experimental Data ◽  
Contact Time ◽  
Methyl Violet ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Casuarina Equisetifolia ◽  
Dye Pollutants ◽  
Methyl Violet 2B ◽  
Before And After

One of the major contaminants of water bodies is dye pollutants that come from textile, paper, and leather industries. In this study, Casuarina equisetifolia needle (CEN) is used to remove methyl violet 2B (MV) from aqueous solutions. Batch experiments were done to investigate the contact time, effect of pH, initial dye concentrations, and temperature. Langmuir and Freundlich isotherm models were used to describe the interaction between the adsorbate and adsorbent. The sorption mechanism was described using Lagergren 1st order, pseudo 2nd order, and Weber-Morris intraparticle diffusion models. FTIR spectroscopy was used to analyze the functional groups of CEN before and after sorption with MV. Optimal conditions were found to be at room temperature with 2 h contact time and no pH adjustment was needed. Experimental data was best fitted onto Langmuir model with maximum adsorption capacity of 164.99 mg/g, while pseudo 2nd order best described the experimental data for the kinetics study. Thermodynamic parameters such as change in Gibbs free energy (), enthalpy (), and entropy () were also investigated.

scholarly journals Cobalt adsorption on the nano-hydroxyapatite matrix: isotherm and kinetic studies

2017 ◽  
Vol 65 (2) ◽  
pp. 131-137 ◽  
Author(s):  
V. N. Narwade ◽  
R. S. Khairnar
Keyword(s):  
Room Temperature ◽  
Freundlich Isotherm ◽  
Kinetic Studies ◽  
Chemical Precipitation ◽  
Precipitation Method ◽  
Order Model ◽  
Nano Material ◽  
Pseudo Second Order ◽  
Wet Chemical ◽  
Wet Chemical Precipitation

Abstract Cobalt radionuclide is one of the prime contaminants generated during operation of pressurized heavy water. The paper reports the study of cobalt adsorption on hydroxyapatite (HAp) nanoceramic. A modified wet chemical precipitation method is used for HAp synthesis. The HAp nano-material is characterized by XRD, FTIR, TG/DTA, AFM, SEM, and EDAX. Experiments are performed in batches to observe the effect of cobalt adsorption on HAp matrix. The adsorption of cobalt on HAp is examined at room temperature. The isotherm and kinetic studies showed that the Freundlich isotherm and pseudo-second order model are the best choices to describe the nature of adsorption.

scholarly journals Multi-Component Adsorption of Benzene, Toluene, Ethylbenzene, and Xylene from Aqueous Solutions by Montmorillonite Modified with Tetradecyl Trimethyl Ammonium Bromide

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
H. Nourmoradi ◽  
Mehdi Khiadani ◽  
M. Nikaeen
Keyword(s):  
Experimental Data ◽  
Aqueous Solutions ◽  
Structural Changes ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Ammonium Bromide ◽  
Order Kinetic ◽  
Multicomponent Adsorption ◽  
Benzene Toluene ◽  
Kinetic And Isotherm Models

Multicomponent adsorption of benzene, toluene, ethylbenzene, and xylene (BTEX) was assessed in aqueous solutions by montmorillonite modified with tetradecyl trimethyl ammonium bromide (TTAB-Mt). Batch experiments were conducted to determine the influences of parameters including loading rates of surfactant, contact time, pH, adsorbate concentration, and temperature on the adsorption efficiency. Scanning electron microscope (SEM) and X-ray diffractometer (XRD) were used to determine the adsorbent properties. Results showed that the modification of the adsorbent via the surfactant causes structural changes of the adsorbent. It was found that the optimum adsorption condition achieves with the surfactant loading rate of 200% of the cation exchange capacity (CEC) of the adsorbent for a period of 24 h. The sorption of BTEX by TTAB-Mt was in the order ofB<T<E<X. The experimental data were fitted by many kinetic and isotherm models. The results also showed that the pseudo-second-order kinetic model and Freundlich isotherm model could, respectively, be fitted to the experimental data better than other available kinetic and isotherm models. The thermodynamic study indicated that the sorption of BTEX with TTAB-Mt was achieved spontaneously and the adsorption process was endothermic as well as physical in nature. The regeneration results of the adsorbent also showed that the adsorption capacity of adsorbent after one use was 51% to 70% of original TTAB-Mt.

scholarly journals Removal of cadmium from aqueous solutions using excised leaves of Quetta pine (Pinus halepensis Mill.)

2015 ◽  
Vol 43 (3) ◽  
pp. 277-281 ◽  
Author(s):  
M Rahman ◽  
S Gul ◽  
M Ajmal ◽  
A Iqbal ◽  
Akk Achakzai
Keyword(s):  
Aqueous Solution ◽  
Contact Time ◽  
Pinus Halepensis ◽  
Freundlich Isotherm ◽  
Batch Adsorption ◽  
Adsorption Efficiency ◽  
Cadmium Removal ◽  
Optimum Ph ◽  
Maximum Contact ◽  
Adsorbent Dose

Removal of cadmium from aqueous solution was studied by using Quetta pine (Pinus halepensis Mill.) leaves. Batch adsorption experiments were performed as a function of appropriate equilibrium time, pH, concentration of adsorbate and amount of adsorbent. The optimum pH required for maximum adsorption was found to be 7.0 and the maximum contact time for the equilibrium was 30 minutes at adsorbent dose of 10 g. The maximum adsorption efficiency of cadmium removal was 98.50%. The results were better fitted by Langmuir than Freundlich isotherm. The separation factor of equilibrium 0.12 and 0.67 showed that Quetta pine leaves are good adsorbent of cadmium from aqueous solution DOI: http://dx.doi.org/10.3329/bjb.v43i3.21598 Bangladesh J. Bot. 43(3): 277-281, 2014 (December)

scholarly journals Crystal Chemistry and Luminescence Properties of Eu-Doped Polycrystalline Hydroxyapatite Synthesized by Chemical Precipitation at Room Temperature

Crystals ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 250 ◽  
Author(s):  
Francesco Baldassarre ◽  
Angela Altomare ◽  
Nicola Corriero ◽  
Ernesto Mesto ◽  
Maria Lacalamita ◽  
...  
Keyword(s):  
Fourier Transform ◽  
High Temperature ◽  
Inductively Coupled Plasma ◽  
Room Temperature ◽  
Annealing Temperature ◽  
Chemical Precipitation ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Inductively Coupled

Europium-doped hydroxyapatite Ca10(PO4)6(OH)2 (3% mol) powders were synthesized by an optimized chemical precipitation method at 25 °C, followed by drying at 120 °C and calcination at 450 °C and 900 °C. The obtained nanosized crystallite samples were investigated by means of a combination of inductively coupled plasma (ICP) spectroscopy, powder X-ray diffraction (PXRD), Fourier Transform Infrared (FTIR), Raman and photoluminescence (PL) spectroscopies. The Rietveld refinement in the hexagonal P63/m space group showed europium ordered at the Ca2 site at high temperature (900 °C), and at the Ca1 site for lower temperatures (120 °C and 450 °C). FTIR and Raman spectra showed slight band shifts and minor modifications of the (PO4) bands with increasing annealing temperature. PL spectra and decay curves revealed significant luminescence emission for the phase obtained at 900 °C and highlighted the migration of Eu from the Ca1 to Ca2 site as a result of increasing calcinating temperature.

scholarly journals Synthesis of New Cyclodextrin-Based Adsorbents to Remove Direct Red 83:1

Polymers ◽  
2020 ◽  
Vol 12 (9) ◽  
pp. 1880
Author(s):  
José A. Pellicer ◽  
María Isabel Rodríguez-López ◽  
María Isabel Fortea ◽  
Vicente M. Gómez-López ◽  
David Auñón ◽  
...  
Keyword(s):  
Room Temperature ◽  
Advanced Oxidation Process ◽  
Oxidation Process ◽  
Freundlich Isotherm ◽  
Intraparticle Diffusion ◽  
Isotherm Models ◽  
Intraparticle Diffusion Model ◽  
Pseudo Second Order ◽  
Physical Interactions ◽  
Resonance Particle

Two cyclodextrins (CDs), γ– and hydroxypropyl (HP)–γ–CDs were used to synthesize new adsorbents by using epichlorohydrin (EPI) as cross-linking agent in order to remove Direct Red 83:1 (DR) from water. Both polymers were characterized in terms of Fourier spectroscopy, nuclear magnetic resonance, particle size distribution and thermogravimetric analysis. Experimental data for both polymers were well fitted to the pseudo-second order and intraparticle diffusion model, indicating that in the adsorption both chemical and physical interactions are essential in the removal of DR. Three different isotherm models were analyzed, concluding that γ–CDs–EPI followed the Temkin isotherm and HP–γ–CDs-EPI the Freundlich isotherm, these results suggested that the adsorption was happening onto heterogeneous surfaces. The results of the Gibbs free energy showed that the adsorption was spontaneous at room temperature. In order to eliminate the remaining dye after the polymer treatment, and advanced oxidation process (AOP) was considered, achieving more than 90% of removal combining both mechanisms.

scholarly journals Optimization, equilibrium and kinetic studies of Zn2+ and Ni2+ adsorption from aqueous solutions using composite adsorbent

2018 ◽  
Vol 67 (3) ◽  
pp. 279-290 ◽  
Author(s):  
Haider M. Zwain ◽  
Mohammadtaghi Vakili ◽  
Irvan Dahlan
Keyword(s):  
Contact Time ◽  
Coal Fly Ash ◽  
Sol Gel ◽  
Freundlich Isotherm ◽  
Kinetic Studies ◽  
Isotherm Models ◽  
Experimental Conditions ◽  
Palm Oil Fuel Ash ◽  
Composite Adsorbent ◽  
Oil Fuel

Abstract A novel RHA/PFA/CFA composite adsorbent was synthesized from rice husk ash (RHA), palm oil fuel ash (PFA), and coal fly ash (CFA) by modified sol-gel method. Effect of different parameters such as adsorbent dosage, contact time, and pH were studied using batch experiment to optimize the maximum zinc (Zn2+) and nickel (Ni2) adsorption conditions. Results showed that the maximum adsorption condition occurred at adsorbent amount of 10 g/L, contact time of 60 min, and pH 7. At this condition, the removal efficiencies were 81% and 61% for Zn2+ and Ni2+, in which the adsorption capacities (qmax) were 21.74 mg/g and 17.85 mg/g, respectively. Adsorption behavior of RHA/PFA/CFA composite adsorbent was studied through the various isotherm models at different adsorbent amounts. The results indicated that the Freundlich isotherm model gave an excellent agreement with the experimental conditions. Based on the results obtained from the kinetic studies, pseudo-second-order was suitable for the adsorption of Ni2+ and Zn2+, compared to the pseudo-first-order model. The results presented in this study showed that RHA/PFA/CFA composite adsorbent successfully adsorbed Zn2+ and Ni2.

Sign in / Sign up

Export Citation Format

Share Document