scholarly journals PHYTOPRODUCTION OF IRON NANOPARTICLES FOR METHYL ORANGE REMOVAL AND ITS OPTIMIZATION STUDIES

2021 ◽  
Vol 21 (no 1) ◽  
Author(s):  
Yogita Sharma ◽  
Rachna Bhateria
Keyword(s):  
Methyl Orange ◽  
Leaf Extract ◽  
Iron Nanoparticles ◽  
Removal Rate ◽  
Synthesis Method ◽  
Batch Studies ◽  
Transmission Electron ◽  
Optimization Study ◽  
Commercial Applications ◽  
Datura Inoxia

In the present study, iron nanoparticles have been synthesized using the leaf extract of potential weed Datura inoxia to evaluate their feasibility for methyl orange removal. This method approves that the green synthesis method must be adopted for the more efficient and rapid synthesis of metal nanoparticles. A simple process of bio reduction has been involved, the leaf extract of Datura inoxia used as a precursor for reducing metal iron. The UV- visible spectral analyses for iron nanoparticles have shown a peak at 240 nm wavelength. Spherical shaped iron nanoparticles are formed as shown by transmission electron microscopy. Batch studies were investigated for optimization study of methyl orange removal on selected parameters i.e., pH (1-10), adsorbent dose (0.02-0.14g), initial dye concentration (5-100pm), contact time (15-120 minutes) and temperature (20- 50o C). The result from the present study approves easy and fast dye removal of 98 % with kinetic data following a second order removal rate. The thermodynamics parameters supported the spontaneity with a negative value of ?G i.e., -14.87 kJ mol-1 and exothermic (?H -7.094 kJ mol-1) nature of the reaction. Thus, it can be concluded that the use of Datura inoxia for the phyto production of iron nanoparticles is efficient for various commercial applications in environment sector

scholarly journals Experimental Investigation on Green Synthesis of FeNPs using Azadirachta indica leaves

2021 ◽  
Author(s):  
Vijay Devra ◽  
Ajay Rathore
Keyword(s):  
Electron Microscopy ◽  
Azadirachta Indica ◽  
Leaf Extract ◽  
Iron Nanoparticles ◽  
Synthesis Process ◽  
Novel Technology ◽  
Transmission Electron ◽  
Ftir Technique ◽  
Plant Leaf Extract ◽  
Average Size

Abstract In the field of nanotechnology, developing an environmentally friendly method for the synthesis of iron nanoparticles (FeNPs) an important aspect. The use of secondary metabolites from plant leaf extract has recently emerged as a novel technology for the synthesis of various nanoparticles, according to recent studies. The leaf extract of Azadirachta indica was used to synthesize iron nanoparticles in this research. The effects of reactant concentrations, reaction temperature and pH of the solution on the synthesis process of iron nanoparticles were studied. The formation of iron nanoparticles in dispersion was monitored using a UV-Visible Spectrophotometer that analyzed absorbance spectra. Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) characterized the morphology of iron nanoparticles and results reveal the particles are spherical in shape with an average size of 48 nm. The following are the ideal conditions for synthesis: leaf extract 15%, [FeCl 3 ] = 1.0 mM, pH 6.0 and temperature 60◦C. The plant biomolecules induce the reduction of Fe 3+ ions to FeNPs and act as a capping and stabilizing agent, which is confirmed by the FTIR technique. Therefore, they have good stability for various applications.

Photocatalytic Degradation of Methyl Orange Dye with Synthesized Chitosan/Fe2O3Nanocomposite and its Isotherm Studies.

2020 ◽  
Vol 16 ◽  
Author(s):  
Nimisha Jadon ◽  
Gulzar Ahmad Bhat ◽  
Manoharmayum Vishwanath Sharma ◽  
Harendra Kumar Sharma
Keyword(s):  
Methyl Orange ◽  
Dye Degradation ◽  
Dose Effect ◽  
X Ray Diffraction ◽  
Methyl Orange Degradation ◽  
Transmission Electron ◽  
Fourier Transformation Infrared Spectroscopy ◽  
Vis Spectroscopy ◽  
Methyl Orange Dye ◽  
Degradation Of Methyl Orange

Background: The study focuses on the synthesis of chitosan/ Fe2O3 nanocomposite, its characterization and application in methyl orange dye degradation. Methods: The synthesized chitosan/ Fe2O3 nanocomposite was characterized with Powder X-Ray Diffraction, Fourier Transformation Infrared Spectroscopy (FTIR), Transmission Electron Microscopy (TEM) and UV-Vis Spectroscopy. Results: The characterization showed that the Fe2O3nanoparticles were embedded in the polymer matrix of chitosan. The size of the Fe2O3nanoparticles were less than 10nm and the crystallite size was 1.22 nm.The synthesized chitosan/ Fe2O3nanocomposite was tested for methyl orange degradation using different parameters such as effect of contact time, effect of dose, effect of concentration and effect of pH for the degradation of methyl orange dye in aqueous solution.The Fruendlich, Langmuir and Temkin isotherm studies were also conducted for adsoption of methyl orange on Chitosan/ Fe2O3nanocomposite. Conclusion: The study indicated that the synthesized chitosan/Fe2O3 nanocomposite had the potential of degrading methyl orange dye up to 75.04% under the set condition in this experiment which indicate that Chitosan/ Fe2O3 nanocomposite is a viable option that can be used for the degradation of methyl orange dye.

scholarly journals Synthesis of Ce1−xPdxO2−δ Solid Solution in Molten Nitrate

Catalysts ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 640
Author(s):  
Hideaki Sasaki ◽  
Keisuke Sakamoto ◽  
Masami Mori ◽  
Tatsuaki Sakamoto
Keyword(s):  
Electron Microscopy ◽  
Solid Solution ◽  
Solid Solutions ◽  
Photoelectron Spectroscopy ◽  
Synthesis Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Co Precipitation ◽  
Ionic States

CeO2-based solid solutions in which Pd partially substitutes for Ce attract considerable attention, owing to their high catalytic performances. In this study, the solid solution (Ce1−xPdxO2−δ) with a high Pd content (x ~ 0.2) was synthesized through co-precipitation under oxidative conditions using molten nitrate, and its structure and thermal decomposition were examined. The characteristics of the solid solution, such as the change in a lattice constant, inhibition of sintering, and ionic states, were examined using X-ray diffraction (XRD), scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM−EDS), transmission electron microscopy (TEM)−EDS, and X-ray photoelectron spectroscopy (XPS). The synthesis method proposed in this study appears suitable for the easy preparation of CeO2 solid solutions with a high Pd content.

Structural, Morphological, Magnetic and Self-Heating Studies of One-Step Polyol Synthesized Manganese Ferrite (MnFe2O4) Nanoparticles

2019 ◽  
Vol 19 (01) ◽  
pp. 1950003
Author(s):  
P. R. Ghutepatil ◽  
S. H. Pawar
Keyword(s):  
Room Temperature ◽  
Synthesis Method ◽  
Average Crystallite Size ◽  
Superparamagnetic Nanoparticles ◽  
Polyol Synthesis ◽  
X Ray Diffraction ◽  
Self Heating ◽  
Transmission Electron ◽  
One Step ◽  
Mnfe2o4 Nanoparticles

In this paper, uniform and superparamagnetic nanoparticles have been prepared using one-step polyol synthesis method. Structural, morphological and magnetic properties of obtained MnFe2O4 nanoparticles have been investigated by using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscope (FE-SEM), transmission electron microscopy (TEM), vibrating sample magnetometry (VSM) and thermogravimetric analysis (TGA) techniques. Structural investigation showed that the average crystallite size of obtained nanoparticles was about 10[Formula: see text]nm. Magnetic study revealed that the nanoparticles were superparamagnetic at room temperature with magnetization 67[Formula: see text]emu/g at room temperature. The self-heating characteristics of synthesized MnFe2O4 nanoparticles were studied by applying external AC magnetic field of 167.6 to 335.2[Formula: see text]Oe at a fixed frequency of 265[Formula: see text]kHz. The SAR values of MnFe2O4 nanoparticles were calculated for 2, 5, 10[Formula: see text]mg[Formula: see text]mL[Formula: see text] concentrations and it is observed that the threshold hyperthermia temperature is achieved for all concentrations.

Application of Microwave Radiation in Modified Polyol Process for Synthesis Pure, Te-Doped, and Sn-Doped CoSb3 Thermoelectric Materials

2020 ◽  
Vol 302 ◽  
pp. 123-134
Author(s):  
Thammanoon Kapanya ◽  
Chanchana Thanachayanont ◽  
Adisorn Tuantranont ◽  
Thapanee Sarakonsri
Keyword(s):  
Electron Microscope ◽  
Microwave Radiation ◽  
Crystalline Phase ◽  
Synthesis Method ◽  
Normal Pressure ◽  
Solubility Limit ◽  
Heating Time ◽  
Polyol Process ◽  
Transmission Electron ◽  
Microwave Time

Synthesis routes of CoSb3 need a long reaction time, especially at high temperature and-/or high pressure. Although the modified polyol process assisted with microwave radiation can be used to solve these problems, it used the excess amount of Sb ion. Therefore, this study aimed to solve this drawback by retarding the rate of reduction. The different microwave times (0, 1, and 3 min) were investigated to find out the shortest heating duration for preparing CoSb3 nanoparticles. Te-doped and Sn-doped CoSb3 were synthesized to investigate the benefit of this synthesis method for increasing the solubility limit of Te and Sn in the CoSb3 structure. The phase and microstructure of the synthesized products were characterized by using x-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscope (TEM). The results showed that the high crystalline phase of CoSb3 (JCPDS: 78-0977) without any metallic impurity phases product was successfully synthesized in 3 minutes for a heating time at normal pressure, non-excessive addition of Sb ion precursor, and low temperature. The XRD results of Te-doped and Sn-doped CoSb3 products exhibited poor crystalline phase and hard to exactly identify. In SEM and TEM results, the CoSb3 powder consisted of very tiny spherical-like particles around 10 nanometers attaching together even at different microwave time similar to Te-doped/Sn-doped samples.

The Preparation and Sunlight Activity of Nanocomposite Photocatalysts for Degradation of Methyl Orange Solution

2013 ◽  
Vol 750-752 ◽  
pp. 1397-1400 ◽  
Author(s):  
Li Mei Duan ◽  
Jing Hai Liu ◽  
Xiu Ting Xu ◽  
Ling Xu ◽  
Zong Rui Liu
Keyword(s):  
Methyl Orange ◽  
Synthesis Method ◽  
Reaction System ◽  
Methyl Orange Solution ◽  
Degradation Efficiency ◽  
Composite Photocatalyst ◽  
One Step ◽  
Orange Solution ◽  
Xrd And Tem ◽  
Degradation Of Methyl Orange

Applying one-step solvothermal synthesis method, different CdS/TiO2 nanocomposite materials are obtained by changing the ratio of sulfur and titanium sources. The composite structure and morphology are determined by XRD and TEM. Taking the degradation of methyl orange solution as a model reaction, the photocatalytic activity of CdS/TiO2 composite materials is investigated. The results show that the amount of CdS in composite photocatalyst has great effects on the degradation efficiency of methyl orange under the irradiation of sunlight, and the lower pH of reaction system is also needed to sustain the high degradation efficiency for methyl orange.

scholarly journals Optimization of Green Synthesis of Silver Nanoparticles from Leaf Extracts ofPimenta dioica(Allspice)

2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
Akshay Rajeev Geetha ◽  
Elizabeth George ◽  
Akshay Srinivasan ◽  
Jameel Shaik
Keyword(s):  
Silver Nanoparticles ◽  
Green Synthesis ◽  
Leaf Extract ◽  
Synthesis Method ◽  
Leaf Extracts ◽  
Synthesis Of Nanoparticles ◽  
Hot Air ◽  
Vis Spectroscopy ◽  
Pimenta Dioica ◽  
First Time

Production of silver nanoparticles from the leaf extracts ofPimenta dioicais reported for the first time in this paper. Three different sets of leaves were utilized for the synthesis of nanoparticles—fresh, hot-air oven dried, and sun-dried. These nanoparticles were characterized using UV-Vis spectroscopy and AFM. The results were diverse in that different sizes were seen for different leaf conditions. Nanoparticles synthesized using sun-dried leaves (produced using a particular ratio (1 : 0.5) of the leaf extract sample and silver nitrate (1 mM), resp.) possessed the smallest sizes. We believe that further optimization of the current green-synthesis method would help in the production of monodispersed silver nanoparticles having great potential in treating several diseases.

Optimization of Green Synthesis Approach of Silver Nanoparticles Using Indonesian Wild Honey

2021 ◽  
Vol 891 ◽  
pp. 111-115
Author(s):  
Maradhana Agung Marsudi ◽  
Farah Fitria Sari ◽  
Pandu Mauliddin Wicaksono ◽  
Adinda Asmoro ◽  
Arif Basuki ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Silver Nanoparticles ◽  
Green Synthesis ◽  
Synthesis Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Particle Count ◽  
Transmission Electron ◽  
Nitrate Precursor ◽  
Synthesis Approach

In this work, silver nanoparticles have been successfully synthesized using simple and environmentally friendly ‘green synthesis’ method using Indonesian wild honey as mediator. Particle count and size can be optimized by varying the silver nitrate precursor and honey concentration, with the help of sodium hydroxide as pH regulator. Based on X-ray diffraction (XRD) result, crystalline structure of Ag has been confirmed in sample with impurities from AgCl. Based on dynamic light scattering (DLS) and transmission electron microscopy (TEM) results, it was found that the smallest average particles size of AgNPs (117.5 nm from DLS and 11.1 nm from TEM) was obtained at sample with 5% w/v of honey and 0.5 mM of AgNO3.

Sign in / Sign up

Export Citation Format

Share Document