scholarly journals Vertical level selection for temperature and trace gas profile retrievals using IASI

2015 ◽  
Vol 8 (6) ◽  
pp. 2359-2369 ◽  
Author(s):  
R. A. Vincent ◽  
A Dudhia ◽  
L. J. Ventress
Keyword(s):  
Trace Gas ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Infrared Observation ◽  
Atmospheric Sounding ◽  
Selection For ◽  
Vertical Spacing ◽  
Vertical Level ◽  
New Iterative Method ◽  
Grid Based

Abstract. This work presents a new iterative method for optimally selecting a vertical retrieval grid based on the location of the information while accounting for inter-level correlations. Sample atmospheres initially created to parametrise the Radiative Transfer Model for the Television Infrared Observation Satellite Operational Vertical Sounder (RTTOV) forward model are used to compare the presented iterative selection method with two other common approaches, which are using levels of equal vertical spacing and selecting levels based on the cumulative trace of the averaging kernel matrix (AKM). This new method is shown to outperform compared methods for simulated profile retrievals of temperature, H2O, O3, CH4, and CO with the Infrared Atmospheric Sounding Interferometer (IASI). However, the benefits of using the more complicated iterative approach compared to the simpler cumulative trace method are slight and may not justify the added effort for the cases studied, but may be useful in other scenarios where temperature and trace gases have strong vertical gradients with significant estimate sensitivity. Furthermore, comparing retrievals using a globally optimised static grid vs. a locally adapted one shows that a static grid performs nearly as well for retrievals of O3, CH4, and CO. However, developers of temperature and H2O retrieval schemes may at least consider using adaptive or location specific vertical retrieval grids.

scholarly journals Vertical level selection for temperature and trace gas profile retrievals using IASI

2015 ◽  
Vol 8 (3) ◽  
pp. 2591-2621
Author(s):  
R. A. Vincent ◽  
A. Dudhia ◽  
L. J. Ventress
Keyword(s):  
Iterative Method ◽  
Selection Method ◽  
Trace Gas ◽  
Kernel Matrix ◽  
Iterative Approach ◽  
Selection For ◽  
Vertical Spacing ◽  
Vertical Level ◽  
New Iterative Method ◽  
Grid Based

Abstract. This work presents a new iterative method for optimally selecting a vertical retrieval grid based on the location of the information content while accounting for inter-level correlations. Sample atmospheres initially created to parametrise the RTTOV forward model are used to compare the presented iterative vertical selection method with two other common approaches, which are using levels of equal vertical spacing and selecting levels based on the cumulative trace of the averaging kernel matrix (AKM). This new method is shown to outperform compared methods for synthesized profile retrievals with IASI of temperature, H2O, O3, CH4, and CO. However, the benefits of using the more complicated iterative approach compared to the simpler method of referencing the cumulative trace of the AKM are slight and may not justify the added effort. Furthermore, comparing retrievals using a globally optimized static grid vs. an atmosphere specific one shows that a static grid is likely appropriate for retrievals of O3, CH4, and CO. However, developers of temperature and H2O retrieval schemes may at least consider using adaptive or location specific vertical retrieval grids.

scholarly journals Level 2 processing for the imaging Fourier transform spectrometer GLORIA: derivation and validation of temperature and trace gas volume mixing ratios from calibrated dynamics mode spectra

2015 ◽  
Vol 8 (6) ◽  
pp. 2473-2489 ◽  
Author(s):  
J. Ungermann ◽  
J. Blank ◽  
M. Dick ◽  
A. Ebersoldt ◽  
F. Friedl-Vallon ◽  
...  
Keyword(s):  
Fourier Transform ◽  
Horizontal Resolution ◽  
Trace Gas ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Ionization Mass ◽  
Fourier Transform Spectrometer ◽  
Upper Troposphere ◽  
Mixing Ratios

Abstract. The Gimballed Limb Observer for Radiance Imaging of the Atmosphere (GLORIA) is an airborne infrared limb imager combining a two-dimensional infrared detector with a Fourier transform spectrometer. It was operated aboard the new German Gulfstream G550 High Altitude LOng Range (HALO) research aircraft during the Transport And Composition in the upper Troposphere/lowermost Stratosphere (TACTS) and Earth System Model Validation (ESMVAL) campaigns in summer 2012. This paper describes the retrieval of temperature and trace gas (H2O, O3, HNO3) volume mixing ratios from GLORIA dynamics mode spectra that are spectrally sampled every 0.625 cm−1. A total of 26 integrated spectral windows are employed in a joint fit to retrieve seven targets using consecutively a fast and an accurate tabulated radiative transfer model. Typical diagnostic quantities are provided including effects of uncertainties in the calibration and horizontal resolution along the line of sight. Simultaneous in situ observations by the Basic Halo Measurement and Sensor System (BAHAMAS), the Fast In-situ Stratospheric Hygrometer (FISH), an ozone detector named Fairo, and the Atmospheric chemical Ionization Mass Spectrometer (AIMS) allow a validation of retrieved values for three flights in the upper troposphere/lowermost stratosphere region spanning polar and sub-tropical latitudes. A high correlation is achieved between the remote sensing and the in situ trace gas data, and discrepancies can to a large extent be attributed to differences in the probed air masses caused by different sampling characteristics of the instruments. This 1-D processing of GLORIA dynamics mode spectra provides the basis for future tomographic inversions from circular and linear flight paths to better understand selected dynamical processes of the upper troposphere and lowermost stratosphere.

scholarly journals Performance of the line-by-line radiative transfer model (LBLRTM) for temperature and species retrievals: IASI case studies from JAIVEx

2009 ◽  
Vol 9 (19) ◽  
pp. 7397-7417 ◽  
Author(s):  
M. W. Shephard ◽  
S. A. Clough ◽  
V. H. Payne ◽  
W. L. Smith ◽  
S. Kireev ◽  
...  
Keyword(s):  
Water Vapor ◽  
Radiative Transfer ◽  
Trace Gas ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Line Intensities ◽  
Remote Sounding ◽  
Instrument Noise ◽  
Large Peak ◽  
Line Coupling

Abstract. Presented here are comparisons between the Infrared Atmospheric Sounding instrument (IASI) and the "Line-By-Line Radiative Transfer Model" (LBLRTM). Spectral residuals from radiance closure studies during the IASI JAIVEx validation campaign provide insight into a number of spectroscopy issues relevant to remote sounding of temperature, water vapor and trace gases from IASI. In order to perform quality IASI trace gas retrievals, the temperature and water vapor fields must be retrieved as accurately as possible. In general, the residuals in the CO2 ν2 region are of the order of the IASI instrument noise. However, outstanding issues with the CO2 spectral regions remain. There is a large residual ~−1.7 K in the 667 cm−1 Q-branch, and residuals in the CO2 ν2 and N2O/CO2 ν3 spectral regions that sample the troposphere are inconsistent, with the N2O/CO2 ν3 region being too negative (warmer) by ~0.7 K. Residuals on this lower wavenumber side of the CO2 ν3 band will be improved by line parameter updates, while future efforts to reduce the residuals reaching ~−0.5 K on the higher wavenumber side of the CO2 ν3 band will focus on addressing limitations in the modeling of the CO2 line shape (line coupling and duration of collision) effects. Brightness temperature residuals from the radiance closure studies in the ν2 water vapor band have standard deviations of ~0.2–0.3 K with some large peak residuals reaching ±0.5–1.0 K. These are larger than the instrument noise indicating that systematic errors still remain. New H2O line intensities and positions have a significant impact on the retrieved water vapor, particularly in the upper troposphere where the water vapor retrievals are 10% drier when using line intensities compared with HITRAN 2004. In addition to O3, CH4, and CO, of the IASI instrument combined with an accurate forward model allows for the detection of minor species with weak atmospheric signatures in the nadir radiances, such as HNO3 and OCS.

scholarly journals Nitrogen dioxide observations from the Geostationary Trace gas and Aerosol Sensor Optimization (GeoTASO) airborne instrument: Retrieval algorithm and measurements during DISCOVER-AQ Texas 2013

2016 ◽  
Vol 9 (6) ◽  
pp. 2647-2668 ◽  
Author(s):  
Caroline R. Nowlan ◽  
Xiong Liu ◽  
James W. Leitch ◽  
Kelly Chance ◽  
Gonzalo González Abad ◽  
...  
Keyword(s):  
Air Quality ◽  
Near Infrared ◽  
Infrared Light ◽  
Trace Gas ◽  
Radiative Transfer Model ◽  
Retrieval Algorithm ◽  
Transfer Model ◽  
Test Bed ◽  
Mixing Ratios ◽  
Sensor Optimization

Abstract. The Geostationary Trace gas and Aerosol Sensor Optimization (GeoTASO) airborne instrument is a test bed for upcoming air quality satellite instruments that will measure backscattered ultraviolet, visible and near-infrared light from geostationary orbit. GeoTASO flew on the NASA Falcon aircraft in its first intensive field measurement campaign during the Deriving Information on Surface Conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ) Earth Venture Mission over Houston, Texas, in September 2013. Measurements of backscattered solar radiation between 420 and 465 nm collected on 4 days during the campaign are used to determine slant column amounts of NO2 at 250 m  ×  250 m spatial resolution with a fitting precision of 2.2 × 1015 moleculescm−2. These slant columns are converted to tropospheric NO2 vertical columns using a radiative transfer model and trace gas profiles from the Community Multiscale Air Quality (CMAQ) model. Total column NO2 from GeoTASO is well correlated with ground-based Pandora observations (r = 0.90 on the most polluted and cloud-free day of measurements and r = 0.74 overall), with GeoTASO NO2 slightly higher for the most polluted observations. Surface NO2 mixing ratios inferred from GeoTASO using the CMAQ model show good correlation with NO2 measured in situ at the surface during the campaign (r = 0.85). NO2 slant columns from GeoTASO also agree well with preliminary retrievals from the GEO-CAPE Airborne Simulator (GCAS) which flew on the NASA King Air B200 (r = 0.81, slope = 0.91). Enhanced NO2 is resolvable over areas of traffic NOx emissions and near individual petrochemical facilities.

Impact of 3D cloud structures on tropospheric NO2 column measurements from UV-VIS sounders

2020 ◽  
Author(s):  
Huan Yu ◽  
Arve Kylling ◽  
Claudia Emde ◽  
Bernhard Mayer ◽  
Kerstin Stebel ◽  
...  
Keyword(s):  
Radiative Transfer ◽  
Mitigation Strategies ◽  
Trace Gas ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Vertical Column ◽  
Ice Clouds ◽  
Cloud Data ◽  
One Step ◽  
The Impact

<p>Operational retrievals of tropospheric trace gases from space-borne spectrometers are made using 1D radiative transfer models. To minimize cloud effects generally only partially cloudy pixels are analysed using simplified cloud contamination treatments based on radiometric cloud fraction estimates and photon path length corrections based on oxygen collision pair (O<sub>2</sub>-O<sub>2</sub>) or O<sub>2</sub>A-absorption band measurements. In reality, however, the impact of clouds can be much more complex, involving scattering of clouds in neighbouring pixels and cloud shadow effects. Therefore, to go one step further, other correction methods may be envisaged that use sub-pixel cloud information from co-located imagers. Such methods require an understanding of the impact of clouds on the real 3D radiative transfer. We quantify this impact using the MYSTIC 3D radiative transfer model. The generation of realistic 3D input cloud fields, needed by MYSTIC (or any other 3D radiative transfer model), is non-trivial. We use cloud data generated by the ICOsahedral Non-hydrostatic (ICON) atmosphere model for a region including Germany, the Netherlands and parts of other surrounding countries. The model simulates realistic liquid and ice clouds with a horizontal spatial resolution of 156 m and it has been validated against ground-based and satellite-based observational data.</p><p>As a trace gas example, we study NO<sub>2</sub>, a key tropospheric trace gas measured by the atmospheric Sentinels. The MYSTIC 3D model simulates visible spectra, which are ingested in standard DOAS retrieval algorithms to retrieve the NO<sub>2</sub> column amount. Spectra are simulated for a number of realistic cloud scenarios, snow free surface albedos, and solar and satellite geometries typical of low-earth and geostationary orbits. The retrieved NO<sub>2</sub> vertical column densities (VCD) are compared with the true values to identify conditions where 3D cloud effects lead to significant biases on the NO<sub>2</sub> VCDs. A variety of possible mitigation strategies for such pixels are then explored.</p>

scholarly journals Evaluation of Cirrus Parameterizations for Radiative Flux Computations in Climate Models Using TOVS–ScaRaB Satellite Observations

2007 ◽  
Vol 20 (17) ◽  
pp. 4459-4475 ◽  
Author(s):  
C. J. Stubenrauch ◽  
F. Eddounia ◽  
J. M. Edwards ◽  
A. Macke
Keyword(s):  
Optical Properties ◽  
Radiative Transfer ◽  
Climate Models ◽  
Radiative Flux ◽  
Satellite Observations ◽  
Radiation Budget ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Ice Crystal ◽  
Infrared Observation

Abstract Combined simultaneous satellite observations are used to evaluate the performance of parameterizations of the microphysical and optical properties of cirrus clouds used for radiative flux computations in climate models. Atmospheric and cirrus properties retrieved from Television and Infrared Observation Satellite (TIROS-N) Operational Vertical Sounder (TOVS) observations are given as input to the radiative transfer model developed for the Met Office climate model to simulate radiative fluxes at the top of the atmosphere (TOA). Simulated cirrus shortwave (SW) albedos are then compared to those retrieved from collocated Scanner for Radiation Budget (ScaRaB) observations. For the retrieval, special care has been given to angular direction models. Three parameterizations of cirrus ice crystal optical properties are represented in the Met Office radiative transfer model. These parameterizations are based on different physical approximations and different hypotheses on crystal habit. One parameterization assumes pristine ice crystals and two ice crystal aggregates. By relating the cirrus ice water path (IWP) retrieved from the effective infrared emissivity to the cirrus SW albedo, differences between the parameterizations are amplified. This study shows that pristine crystals seem to be plausible only for cirrus with IWP less than 30 g m−2. For larger IWP, ice crystal aggregates lead to cirrus SW albedos in better agreement with the observations. The data also indicate that climate models should allow the cirrus effective ice crystal diameter (De) to increase with IWP, especially in the range up to 30 g m−2. For cirrus with IWP less than 20 g m−2, this would lead to SW albedos that are about 0.02 higher than the ones of a constant De of 55 μm.

scholarly journals A non-iterative linear retrieval for infrared high resolution limb sounders

2013 ◽  
Vol 6 (1) ◽  
pp. 721-766
Author(s):  
L. Millán ◽  
A. Dudhia
Keyword(s):  
High Resolution ◽  
Computing Time ◽  
Michelson Interferometer ◽  
High Spectral Resolution ◽  
Radiative Transfer Model ◽  
Spectral Signature ◽  
Transfer Model ◽  
Gas Concentration ◽  
Atmospheric Sounding ◽  
Retrieval Scheme

Abstract. Currently most of the high spectral resolution infrared limb sounders use subsets of the recorded spectra (microwindows) in their retrieval schemes to reduce the computing time of rerunning the radiative transfer model. A fast linear retrieval scheme is described which allows the whole spectral signature of the target molecule to be used. We determine how close the linearisation point needs to be to the solution in order to fall in the linear regime and also suggest an adjustment to the forward model and Jacobians to propagate the change in pressure and temperature on the gas concentration retrievals. As an example, this technique is implemented for the Michelson Interferometer for Passive Atmospheric Sounding instrument, but it is applicable to any high resolution limb sounder.

scholarly journals An Assessment of SAPHIR Calibration Using Quality Tropical Soundings

2015 ◽  
Vol 32 (1) ◽  
pp. 61-78 ◽  
Author(s):  
G. Clain ◽  
H. Brogniez ◽  
V. H. Payne ◽  
V. O. John ◽  
M. Luo
Keyword(s):  
Radiative Transfer ◽  
Incidence Angle ◽  
Intraseasonal Variability ◽  
Sensor Data ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Water Vapor Absorption ◽  
Infrared Observation ◽  
Cross Track

AbstractThe Sondeur Atmosphérique du Profil d’Humidité Intertropicale par Radiométrie (SAPHIR) instrument on board the Megha-Tropiques (MT) platform is a cross-track, multichannel microwave humidity sounder with six channels near the 183.31-GHz water vapor absorption line, a maximum scan angle of 42.96° (resulting in a maximum incidence angle of 50.7°), a 1700-km-wide swath, and a footprint resolution of 10 km at nadir. SAPHIR L1A2 brightness temperature (BT) observations have been compared to BTs simulated by the radiative transfer model (RTM) Radiative Transfer for the Television and Infrared Observation Satellite (TIROS) Operational Vertical Sounder (RTTOV-10), using in situ measurements from radiosondes as input. Selected radiosonde humidity observations from the Cooperative Indian Ocean Experiment on Intraseasonal Variability in the Year (CINDY)–Dynamics of the Madden–Julian Oscillation (DYNAMO) campaign (September 2011–March 2012) were spatiotemporally collocated with MT overpasses. Although several sonde systems were used during the campaign, all of the sites selected for this study used the Vaisala RS92-SGPD system and were chosen in order to avoid discrepancies in data quality and biases.To interpret the results of the comparison between the sensor data and the RTM simulations, uncertainties associated with the data processing must be propagated throughout the evaluation. The magnitude of the bias was found to be dependent on the observing channel, increasing from 0.18 K for the 183.31 ± 0.2-GHz channel to 2.3 K for the 183.31 ± 11-GHz channel. Uncertainties and errors that could impact the BT biases were investigated. These can be linked to the RTM input and design, the radiosonde observations, the chosen methodology of comparison, and the SAPHIR instrument itself.

scholarly journals Impacts of updated spectroscopy on thermal infrared retrievals of methane evaluated with HIPPO data

2014 ◽  
Vol 7 (9) ◽  
pp. 10059-10107
Author(s):  
M. J. Alvarado ◽  
V. H. Payne ◽  
K. E. Cady-Pereira ◽  
J. D. Hegarty ◽  
S. S. Kulawik ◽  
...  
Keyword(s):  
Nitrous Oxide ◽  
Trace Gases ◽  
Thermal Infrared ◽  
Trace Gas ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Spectroscopic Parameters ◽  
Mixing Ratios ◽  
Aircraft Observations ◽  
The Impact

Abstract. Errors in the spectroscopic parameters used in the forward radiative transfer model can introduce altitude-, spatially-, and temporally-dependent biases in trace gas retrievals. For well-mixed trace gases such as methane, where the variability of tropospheric mixing ratios is relatively small, reducing such biases is particularly important. We use aircraft observations from all five missions of the HIAPER Pole-to-Pole Observations (HIPPO) of the Carbon Cycle and Greenhouse Gases Study to evaluate the impact of updates to spectroscopic parameters for methane (CH4), water vapor (H2O), and nitrous oxide (N2O) on thermal infrared retrievals of methane from the NASA Aura Tropospheric Emission Spectrometer (TES). We find that updates to the spectroscopic parameters for CH4 result in a substantially smaller mean bias in the retrieved CH4 when compared with HIPPO observations. After an N2O-based correction, the bias in TES methane upper tropospheric representative values for measurements between 50° S and 50° N decreases from 56.9 to 25.7 ppbv, while the bias in the lower tropospheric representative value increases only slightly (from 27.3 to 28.4 ppbv). For retrievals with less than 1.6 DOFS, the bias is reduced from 26.8 to 4.8 ppbv. We also find that updates to the spectroscopic parameters for N2O reduce the errors in the retrieved N2O profile.

scholarly journals On the improvement of NO<sub>2</sub> satellite retrievals – aerosol impact on the airmass factors

2009 ◽  
Vol 2 (6) ◽  
pp. 3221-3264
Author(s):  
J. Leitão ◽  
A. Richter ◽  
M. Vrekoussis ◽  
A. Kokhanovsky ◽  
Q. J. Zhang ◽  
...  
Keyword(s):  
Optical Depth ◽  
Accurate Determination ◽  
Single Scattering ◽  
Sensitivity Study ◽  
Trace Gas ◽  
Radiative Transfer Model ◽  
Satellite Measurement ◽  
Transfer Model ◽  
Aerosol Layer ◽  
The Impact

Abstract. The accurate determination of nitrogen dioxide (NO2) tropospheric vertical columns from satellite measurements depends, partly, on the airmass factor (AMF) used. A sensitivity study was performed with the radiative transfer model SCIATRAN to better understand the impact of aerosols in the calculation of NO2 AMFs. This influence was studied by varying the NO2 and aerosol vertical distributions, as well as physical and optical properties of the particles. The key factors for these calculations were identified as the relation between trace gas and aerosol vertical profiles, the optical depth of the aerosol layer, and single scattering albedo. Overall it was found that aerosol mixed with the trace gas increases the measurements' sensitivity. The largest change, a factor of ~2 relative to the situation without aerosols, was found when a low layer of aerosol (600 m) was combined with a homogenous NO2 layer of 1.0 km. A layer of aerosol above the NO2 will usually reduce the sensitivity of the satellite measurement, a situation found mostly for runs with discrete elevated aerosol layers representative for long-range transport of aerosols that can generate a decrease of the AMF values of up to 70%. The use of measured aerosol profiles and modelled NO2 resulted, generally, in a much smaller changes of AMF relative to the pure Rayleigh case. Exceptions are some events of elevated layers with high aerosol optical depth that lead to a strong decrease of the AMF values. These results highlight the importance of aerosols in the retrieval of tropospheric NO2 columns from space and indicate the need for detailed information on aerosol properties and vertical distribution.

Sign in / Sign up

Export Citation Format

Share Document