Stratigraphy and sediment signal transmission in a flexural foreland basin dynamically linked to an uplifting range

2020 ◽  
Author(s):  
Laure Guerit ◽  
Delphine Rouby ◽  
Cécile Robin ◽  
François Guillocheau ◽  
Brendan Simon ◽  
...  
Keyword(s):  
Numerical Models ◽  
Accumulation Rate ◽  
Foreland Basin ◽  
Surface Processes ◽  
Precipitation Rate ◽  
Foreland Basins ◽  
Uplift Rate ◽  
Mountain Belts ◽  
Aquitaine Basin ◽  
Topographic Evolution

<p>Foreland basins that develop at the foot of collisional mountain belts accumulate sediments eroded from the ranges. They thus represent valuable archives of the evolution of orogenic systems through time. A few numerical models have investigated the infilling of foreland basins during the growth of an orogenic range and they provide conceptual frameworks for foreland stratigraphy. However, surface processes (erosion, sediment transport and deposition) are often quite basic in these models, and in the last decade, progress has been made in the description of surface processes and its implementation in numerical models. Recently, we developed a landscape evolution model able to describe the evolution of an eroding source coupled to a flexural sedimentary basin (Yuan et al, 2019, JGR; Guerit et al, 2019, Geology). This model takes into account erosion and deposition at the same time, and it thus allows a full dynamical coupling of the range and its foreland. We take advantage of this efficient numerical model to take another look at the stratigraphic evolution of a foreland basin and at the transmission of sediment signal from source to sink. <br>We use the model to simulate the evolution of a flexural retro-foreland basin coupled to an uplifting range and subjected to temporal variations in uplift and precipitation rates. Such variations affect the topography of the range: a lower uplift rate or an higher precipitation lead to a lower range. As a result, because the accommodation space available in the foreland is purely flexural, a decrease in uplift rate or an increase in precipitation rate will be marked by an erosional surface in the foreland basin. On the contrary, an increase in uplift rate or a decrease in precipitation rate will be preserved in the stratigraphy. Interestingly, although the two scenarios induce a different sediment signal from the sources, they are both recorded in the foreland basin as a transient increase in accumulation rate. Such a signal alone can therefore not be used to decipher the type of perturbation that affected the source.<br>Finally, we discuss the evolution of a natural range and coupled foreland basin, the Pyrenees and the Aquitaine Basin. We show that the spatial pattern of sediment deposition in the Aquitaine Basin is very consistent with the topographic evolution of the Pyrenees. However, this topographic evolution is not consistent with the climatic and tectonic reconstruction in the area since the Eocene, opening discussions among others about local vs regional effects. This work is part of the COLORS project, funded by Total.</p>

Magnetostratigraphic study of a Late Cretaceous−Paleogene succession in the eastern Xining basin, NE Tibet: Constraint on the timing of major tectonic events in response to the India-Eurasia collision

2021 ◽  
Author(s):  
Chi-Cheng He ◽  
Yue-Qiao Zhang ◽  
Shao-Kai Li ◽  
Kai Wang ◽  
Jian-Qing Ji
Keyword(s):  
Late Cretaceous ◽  
Accumulation Rate ◽  
Foreland Basin ◽  
Time Span ◽  
Early Miocene ◽  
Foreland Basins ◽  
Southern Tibet ◽  
Tectonic Transition ◽  
History Of ◽  
Xining Basin

Cretaceous-Cenozoic basins developed in the NE Tibetan Plateau contain key archives to unravel the growth history of the plateau in response to the India-Eurasia collision. Here we present magnetostratigraphic results of a Late Cretaceous to Paleogene succession of the Zhongba section outcropping at the southern margin of the eastern Xining basin. This succession consists of three lithological units punctuated by two stratigraphic unconformities, which best recorded the deformation history of this foreland basin. Detailed magnetostratigraphic investigation show that the lower terrestrial sedimentary rock unit, the Minhe Group, was deposited in latest Cretaceous in the time span of ca. 74.5−69.2 Ma; the middle unit was deposited in Paleogene in the time span of ca. 49.3−22 Ma; and the upper conglomeratic unit, not dated, possibly was deposited in early Miocene. Accordingly, the Cretaceous−Paleogene unconformity, widely observed in the foreland basins of NE Tibet, represents a sedimentary hiatus duration of ∼19.9 m.y., from ca. 69.2 Ma to ca. 49.3 Ma, which possibly recorded the far-field response to the tectonic transition from Neo-Tethys oceanic plate subduction to the India-Eurasia collision in southern Tibet. Changes in provenance, sedimentary accumulation rate, and mean susceptibility value at ca. 33−30 Ma, and the total prolate anisotropy of magnetic susceptibility (AMS) ellipsoids and provenance shifting since ca. 23−19 Ma, point to the pulsed growth of West Qinling, and rapid uplift of Laji Shan, respectively, indicating an enhanced effect of the India-Eurasia collision in Oligocene and early Miocene. AMS results show a clockwise rotation of the shortening direction from NEN-SWS in latest Cretaceous to NE-SW in Paleogene.

scholarly journals The push and pull of abandoned channels: How floodplain processes and healing affect avulsion dynamics and alluvial landscape evolution in foreland basins

2021 ◽  
Author(s):  
Harrison K. Martin ◽  
Douglas A. Edmonds
Keyword(s):  
Dynamic Equilibrium ◽  
Landscape Evolution ◽  
Numerical Models ◽  
Foreland Basin ◽  
Field Work ◽  
Foreland Basins ◽  
Abandoned Channel ◽  
Mountain Front ◽  
Set Up ◽  
Abandoned Channels

Abstract. River avulsions are an important mechanism by which sediment is routed and emplaced in foreland basins. However, because avulsions occur infrequently, we lack observational data that might inform where, when, and why avulsions occur and these questions are instead often investigated by rule-based numerical models. These models have historically simplified or neglected the effects of abandoned channels on avulsion dynamics, even though fluvial megafans in foreland basins are characteristically covered in abandoned channels. Here, we investigate the pervasiveness of abandoned channels on modern fluvial megafan surfaces. Then, we present a physically based cellular model that parameterizes interactions between a single avulsing river and abandoned channels in a foreland basin setting. We investigate how abandoned channels affect avulsion set-up, pathfinding, and landscape evolution. We demonstrate and discuss how the processes of abandoned channel inheritance and transient knickpoint propagation post-avulsion serve to shortcut the time necessary to set-up successive avulsions. Then, we address the idea that abandoned channels can both repel and attract future pathfinding flows under different conditions. By measuring the distance between the mountain-front and each avulsion over long (106 to 107 years) timescales, we show that increasing abandoned channel repulsion serves to push avulsions farther from the mountain-front, while increasing attraction pulls avulsions proximally. Abandoned channels do not persist forever, and we test possible channel healing scenarios (deposition-only, erosion-only, and far-field directed) and show that only the final scenario achieves dynamic equilibrium without completely filling accommodation space. We also observe megafan growth occurring via ~O:105 year lobe switching, but only in our runs that employ deposition-only or erosion-only healing modes. Finally, we highlight opportunities for future field work and remote sensing efforts to inform our understanding of the role that floodplain topography, including abandoned channels, plays on avulsion dynamics.

scholarly journals Trans-lithospheric diapirism explains the presence of ultra-high pressure rocks in the European Variscides

2021 ◽  
Vol 2 (1) ◽  
Author(s):  
Petra Maierová ◽  
Karel Schulmann ◽  
Pavla Štípská ◽  
Taras Gerya ◽  
Ondrej Lexa
Keyword(s):  
High Pressure ◽  
Numerical Models ◽  
Classical Concept ◽  
Plate Interface ◽  
Ultra High Pressure ◽  
Common Process ◽  
Mountain Belts ◽  
Collisional Orogens ◽  
Rock Association ◽  
European Variscides

AbstractThe classical concept of collisional orogens suggests that mountain belts form as a crustal wedge between the downgoing and overriding plates. However, this orogenic style is not compatible with the presence of (ultra-)high pressure crustal and mantle rocks far from the plate interface in the Bohemian Massif of Central Europe. Here we use a comparison between geological observations and thermo-mechanical numerical models to explain their formation. We suggest that continental crust was first deeply subducted, then flowed laterally underneath the lithosphere and eventually rose in the form of large partially molten trans-lithospheric diapirs. We further show that trans-lithospheric diapirism produces a specific rock association of (ultra-)high pressure crustal and mantle rocks and ultra-potassic magmas that alternates with the less metamorphosed rocks of the upper plate. Similar rock associations have been described in other convergent zones, both modern and ancient. We speculate that trans-lithospheric diapirism could be a common process.

scholarly journals Volcanism and Volcanogenic Submarine Sedimentation in the Paleogene Foreland Basins of the Alps: Reassessing the Source-to-Sink Systems with an Actualist View

Geosciences ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 23
Author(s):  
Andrea Di Capua ◽  
Federica Barilaro ◽  
Gianluca Groppelli
Keyword(s):  
Foreland Basin ◽  
Fault System ◽  
Foreland Basins ◽  
The North ◽  
Source To Sink ◽  
The Alps ◽  
Alpine Foreland ◽  
Alpine Foreland Basin ◽  
Tectonic Lineament ◽  
First Time

This work critically reviews the Eocene–Oligocene source-to-sink systems accumulating volcanogenic sequences in the basins around the Alps. Through the years, these volcanogenic sequences have been correlated to the plutonic bodies along the Periadriatic Fault System, the main tectonic lineament running from West to East within the axis of the belt. Starting from the large amounts of data present in literature, for the first time we present an integrated 4D model on the evolution of the sediment pathways that once connected the magmatic sources to the basins. The magmatic systems started to develop during the Eocene in the Alps, supplying detritus to the Adriatic Foredeep. The progradation of volcanogenic sequences in the Northern Alpine Foreland Basin is subsequent and probably was favoured by the migration of the magmatic systems to the North and to the West. At around 30 Ma, the Northern Apennine Foredeep also was fed by large volcanogenic inputs, but the palinspastic reconstruction of the Adriatic Foredeep, together with stratigraphic and petrographic data, allows us to safely exclude the Alps as volcanogenic sources. Beyond the regional case, this review underlines the importance of a solid stratigraphic approach in the reconstruction of the source-to-sink system evolution of any basin.

scholarly journals The Age-Depth Profile in the Upper Part of a Steady-State Ice Sheet

1989 ◽  
Vol 35 (121) ◽  
pp. 406-417 ◽  
Author(s):  
Niels Reeh
Keyword(s):  
Steady State ◽  
Layer Thickness ◽  
Flow Line ◽  
Numerical Models ◽  
Accumulation Rate ◽  
Ice Sheet ◽  
Greenland Ice Sheet ◽  
Ice Thickness ◽  
Western Slope ◽  
Simple Models

AbstractSimple analytical models are developed in order to study how up-stream variations in accumulation rate and ice thickness, and horizontal convergence/ divergence of the flow influence the age and annual layer-thickness profiles in a steady-state ice sheet. Generally, a decrease/increase of the accumulation rate and an increase/decrease of the ice thickness in the up-stream direction (i.e. opposite to the flow direction) results in older/younger ice at a given depth in the ice sheet than would result if the up-stream accumulation rate and ice thickness were constant along the flow line.Convergence/divergence of the up-stream flow will decrease/increase the effect of the accumulation-rate and ice-thickness gradients, whereas convergence/divergence has no influence at all on the age and layer-thickness profiles if the up-stream accumulation rate and ice thickness are constant along the flow line.A modified column-flow model, i.e. a model for which the strain-rate profile (or, equivalently, the horizontal velocity profile) is constant down to the depth corresponding to the Holocene/Wisconsinan transition 10 750 year BP., seems to work well for dating the ice back to 10 000–11 000 year B P. at sites in the slope regions of the Greenland ice sheet. For example, the model predicts the experimentally determined age profile at Dye 3 on the south Greenland ice sheet with a relative root-mean-square error of only 3% back to c. 10 700 year B.P. As illustrated by the Milcent location on the western slope of the central Greenland ice sheet, neglecting up-stream accumulation-rate and ice-thickness gradients, may lead to dating errors as large as 3000–000 years for c. 10 000 year old ice.However, even if these gradients are taken into account, the simple model fails to give acceptable ages for 10 000 year old ice at locations on slightly sloping ice ridges with strongly divergent flow, as for example the Camp Century location. The main reason for this failure is that the site of origin of the ice cannot be determined accurately enough by the simple models, if the flow is strongly divergent.With this exception, the simple models are well suited for dating the ice at locations where the available data or the required accuracy do not justify application of elaborate numerical models. The formulae derived for the age-depth profiles can easily be worked out on a pocket calculator, and in many cases will be a sensible alternative to using numerical flow models.

scholarly journals Potential shift from a carbon sink to a source in Amazonian peatlands under a changing climate

2018 ◽  
Vol 115 (49) ◽  
pp. 12407-12412 ◽  
Author(s):  
Sirui Wang ◽  
Qianlai Zhuang ◽  
Outi Lähteenoja ◽  
Frederick C. Draper ◽  
Hinsby Cadillo-Quiroz
Keyword(s):  
21St Century ◽  
Carbon Sink ◽  
Accumulation Rate ◽  
Foreland Basin ◽  
Carbon Accumulation ◽  
Climate Conditions ◽  
Changing Climate ◽  
Soil Carbon Density ◽  
Increasing Precipitation ◽  
Aerobic And Anaerobic

Amazonian peatlands store a large amount of soil organic carbon (SOC), and its fate under a future changing climate is unknown. Here, we use a process-based peatland biogeochemistry model to quantify the carbon accumulation for peatland and nonpeatland ecosystems in the Pastaza-Marañon foreland basin (PMFB) in the Peruvian Amazon from 12,000 y before present to AD 2100. Model simulations indicate that warming accelerates peat SOC loss, while increasing precipitation accelerates peat SOC accumulation at millennial time scales. The uncertain parameters and spatial variation of climate are significant sources of uncertainty to modeled peat carbon accumulation. Under warmer and presumably wetter conditions over the 21st century, SOC accumulation rate in the PMFB slows down to 7.9 (4.3–12.2) g⋅C⋅m−2⋅y−1 from the current rate of 16.1 (9.1–23.7) g⋅C⋅m−2⋅y−1, and the region may turn into a carbon source to the atmosphere at −53.3 (−66.8 to −41.2) g⋅C⋅m−2⋅y−1 (negative indicates source), depending on the level of warming. Peatland ecosystems show a higher vulnerability than nonpeatland ecosystems, as indicated by the ratio of their soil carbon density changes (ranging from 3.9 to 5.8). This is primarily due to larger peatlands carbon stocks and more dramatic responses of their aerobic and anaerobic decompositions in comparison with nonpeatland ecosystems under future climate conditions. Peatland and nonpeatland soils in the PMFB may lose up to 0.4 (0.32–0.52) Pg⋅C by AD 2100 with the largest loss from palm swamp. The carbon-dense Amazonian peatland may switch from a current carbon sink into a source in the 21st century.

Growth fold controls on carbonate distribution in mixed foreland basins: insights from the Amiran foreland basin (NW Zagros, Iran) and stratigraphic numerical modelling

2012 ◽  
Vol 25 (2) ◽  
pp. 149-171 ◽  
Author(s):  
Eduard Saura ◽  
Jean-Christophe Embry ◽  
Jaume Vergés ◽  
David W. Hunt ◽  
Emilio Casciello ◽  
...  
Keyword(s):  
Numerical Modelling ◽  
Foreland Basin ◽  
Foreland Basins

scholarly journals Contrasting geomorphic and stratigraphic responses to normal fault development during single and multi-phase rifting

2021 ◽  
Author(s):  
Sofia Pechlivanidou ◽  
Anneleen Geurts ◽  
Guillaume Duclaux ◽  
Robert Gawthorpe ◽  
Christos Pennos ◽  
...  
Keyword(s):  
Normal Fault ◽  
Sedimentary Facies ◽  
Surface Processes ◽  
Extension Direction ◽  
Multi Phase ◽  
Fault Growth ◽  
Stratigraphic Evolution ◽  
The Impact ◽  
Topographic Evolution ◽  
Previous Phase

Understanding the impact of tectonics on surface processes and the resultant stratigraphic evolution in multi-phase rifts is challenging, as patterns of erosion and deposition related to older phases of extension are overprinted by the subsequent extensional phases. In this study, we use a one-way coupled numerical modelling approach between a tectonic and a surface processes model to investigate topographic evolution, erosion and basin stratigraphy during single and multi-phase rifting. We compare the results from the single and the multi-phase rift experiments for a 5 Myr period during which they experience equal amounts of extension, but with the multi-phase experiment experiencing fault topography inherited from a previous phase of extension. Our results demonstrate a very dynamic evolution of the drainage network that occurs in response to fault growth and linkage and, to depocentre overfilling and overspilling. However, we observe profound differences between topographic and depocenter development during single and multi-phase rifting with implications for sedimentary facies development. Our quantitative approach, enables us to better understand the impact of changing extension direction on the distribution of sediment source areas and the syn-rift stratigraphic development through time and space.

Chemical weathering response to extreme global warming during Paleocene-Eocene Hyperthermals, Southern Pyrenees, Spain

2021 ◽  
Author(s):  
Rocio Jaimes-Gutierrez ◽  
Thierry Adatte ◽  
Emmanuelle Puceat ◽  
Jean Braun ◽  
Sebastien Castelltort
Keyword(s):  
Climatic Change ◽  
Chemical Weathering ◽  
Numerical Models ◽  
Clay Fraction ◽  
Clay Mineralogy ◽  
Foreland Basin ◽  
Isotopic Analysis ◽  
Feedback Mechanism ◽  
Horizon 2020 ◽  
Sediment Routing

<p>The Paleocene and early Eocene were periods yielding multiple hyperthermal events. The most pronounced of them was the Paleocene-Eocene Thermal Maximum (PETM), which was characterized by an abrupt increase in global temperature (5–8 °C) over a short time (20 ka). A negative carbon isotope excursion marks the onset of the PETM, which resulted in the fast injection of CO<sub>2</sub> into the ocean-atmosphere system, triggering global climatic changes. Geochemical, mineralogical, and sedimentological markers record the resulting increase in continental weathering. This is important, as enhanced chemical erosion influences both the CO<sub>2</sub> concentration in the atmosphere and ocean acidity, generating a feedback mechanism. Hence, constraining the rates and intensity of weathering response can further clarify the causes for the PETM and Eocene hyperthermals. This study focuses on the well-preserved Pyrenean foreland basin and intends to assess the continental chemical weathering response of the sediment routing system during the PETM. Clay mineralogy is a climate-sensitive proxy, which records changes in continental erosion. Therefore, clay mineral proportions will be analyzed using X-ray diffraction and major element chemistry on clay-rich samples from the entire source-to-sink system (continental to deep marine deposits). Kaolinite and smectite will be separated from the detrital clay fraction and further subjected to δ<sup>18</sup>O and δD isotopic analysis for paleoclimatic reconstruction. The combined Lu-Hf and Sm-Nd isotope systems in the clay fraction of the sediments will be used to track the evolution of chemical weathering intensity. The outcome of this project will serve to validate numerical models to understand erosion as a function of rapid climatic change. This topic is of keen interest, as the PETM and its sedimentological signal work as a natural analog for anthropogenically-induced climatic change. The project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant Agreement No 860383.</p>

Sign in / Sign up

Export Citation Format

Share Document