scholarly journals The push and pull of abandoned channels: How floodplain processes and healing affect avulsion dynamics and alluvial landscape evolution in foreland basins

2021 ◽  
Author(s):  
Harrison K. Martin ◽  
Douglas A. Edmonds
Keyword(s):  
Dynamic Equilibrium ◽  
Landscape Evolution ◽  
Numerical Models ◽  
Foreland Basin ◽  
Field Work ◽  
Foreland Basins ◽  
Abandoned Channel ◽  
Mountain Front ◽  
Set Up ◽  
Abandoned Channels

Abstract. River avulsions are an important mechanism by which sediment is routed and emplaced in foreland basins. However, because avulsions occur infrequently, we lack observational data that might inform where, when, and why avulsions occur and these questions are instead often investigated by rule-based numerical models. These models have historically simplified or neglected the effects of abandoned channels on avulsion dynamics, even though fluvial megafans in foreland basins are characteristically covered in abandoned channels. Here, we investigate the pervasiveness of abandoned channels on modern fluvial megafan surfaces. Then, we present a physically based cellular model that parameterizes interactions between a single avulsing river and abandoned channels in a foreland basin setting. We investigate how abandoned channels affect avulsion set-up, pathfinding, and landscape evolution. We demonstrate and discuss how the processes of abandoned channel inheritance and transient knickpoint propagation post-avulsion serve to shortcut the time necessary to set-up successive avulsions. Then, we address the idea that abandoned channels can both repel and attract future pathfinding flows under different conditions. By measuring the distance between the mountain-front and each avulsion over long (106 to 107 years) timescales, we show that increasing abandoned channel repulsion serves to push avulsions farther from the mountain-front, while increasing attraction pulls avulsions proximally. Abandoned channels do not persist forever, and we test possible channel healing scenarios (deposition-only, erosion-only, and far-field directed) and show that only the final scenario achieves dynamic equilibrium without completely filling accommodation space. We also observe megafan growth occurring via ~O:105 year lobe switching, but only in our runs that employ deposition-only or erosion-only healing modes. Finally, we highlight opportunities for future field work and remote sensing efforts to inform our understanding of the role that floodplain topography, including abandoned channels, plays on avulsion dynamics.

scholarly journals Thermally-controlled color gradient for fossils and associated sediments: implications for paleoecology

1992 ◽  
Vol 6 ◽  
pp. 14-14
Author(s):  
Gordon C. Baird ◽  
Timothy W. Lyons ◽  
Carlton E. Brett
Keyword(s):  
New York ◽  
New York State ◽  
Foreland Basin ◽  
Field Work ◽  
Black Shales ◽  
Foreland Basins ◽  
Regional Study ◽  
Southern Ontario ◽  
Color Gradient ◽  
Appalachian Foreland

Regional study of Middle-Late Ordovician and Middle-Late Devonian carbonate and siliciclastic deposits in the northern Appalachian foreland basin reveals a prominent pattern of eastward-darkening of marine mudrocks and associated fossils. Exoskeletons of certain trilobite genera transform from a saddle brown coloration in southern Ontario exposures to black and near-black in central and eastern New York. Similar eastward darkening of mudstones and argillaceous carbonate units is observed to be covariant with conodont color alteration (C.A.I.) values across this same region. This pattern is coupled with other lines of evidence for eastward increases in heat-of-burial for strata across New York State, indicating that the darkening is linked to this control. Laboratory heating of thermally “cold”, light-colored samples shows that this process can be simulated under controlled conditions. The darkening of fossils and mudrocks probably occurs due to thermal maturation of organic matter within these materials.Darkening of certain fossiliferous mudrock facies from color values as high as N 7.5 at a C.A.I. of 1.0 to those of N 2.5 at C.A.I. of 3.5 has important implications for paleoecological interpretations. Where obvious fossil-rich beds are absent and field work cursory, it might be tempting to infer a shelf-to-basin transition in the uprank direction where none exists. Where skeletal packstone and grainstone beds are common in thermally mature deposits it is possible that intervening dark-colored shales may be erroneously interpreted as basinal, organicrich (black) shales and the grain-supported beds as turbidites, when, in fact, such beds are shallow-shelf tempestites. We believe that similar value gradients should be present wherever local or regional heat-flow anomalies or differential burial patterns are developed. Foreland basins bordering orogens should contain such gradients and workers must be alert to this illusory color effect when working on complex facies in such settings. It is probable that many paleoenvironmental judgments may have been colored by misinterpretations of this type.

REGIONAL SUBSURFACE MAPPING AND 3D FLEXURAL MODELING OF THE OBLIQUELY-CONVERGING PUTUMAYO FORELAND BASIN, SOUTHERN COLOMBIA

2020 ◽  
pp. 1-115
Author(s):  
Luis Pachón-Parra ◽  
Paul Mann ◽  
Nestor Cardozo
Keyword(s):  
Late Cretaceous ◽  
Foreland Basin ◽  
South American ◽  
Foreland Basins ◽  
Mountain Front ◽  
Early Paleocene ◽  
Exploratory Wells ◽  
Basement High ◽  
Mountain Chain ◽  
Flexural Modeling

The Putumayo foreland basin (PFB) is an underexplored, hydrocarbon-bearing basin located in southernmost Colombia. The PFB forms a 250-km long segment of the 7000-km-long corridor of Late Cretaceous-Cenozoic foreland basins produced by eastward thrusting of the Andean mountain chain over Precambrian rocks of the South American craton. We use ∼4000 km of 2D seismic data tied to 28 exploratory wells to describe the basin-wide structure and stratigraphy of an underexplored hydrocarbon basin. Based on seismic interpretation and comparison with published works from the southward continuation of the PFB into Peru and Ecuador, three main across-strike, structural zones include: 1) the 20-km-wide, Western structural zone closest to the Andean mountain front characterized by inversion of older, Jurassic half-grabens during the late Miocene; 2) the 45-km-wide, Central structural zone characterized by moderately-inverted Jurassic half-grabens; and 3) the 120-km-wide, Eastern structural zone characterized by the 40-km-wide, N-S trending Caquetá arch. The five mainly clastic tectonosequences of the PFB include: 1) Lower Cretaceous pre-foreland basin deposits; 2) Upper Cretaceous-Paleocene foreland basin deposits; 3) Eocene foreland basin deposits related to the early uplift of the Eastern Cordillera; 4) Oligocene-Miocene underfilled, foreland basin deposits; and 5) Plio-Pleistocene overfilled, foreland basin deposits. We used 3D flexural modeling to identify the elastic thickness (Te) of the lithosphere below the PFB, in order to model the location of the sedimentary-related and tectonically-related forebulges of Cretaceous to Oligocene age. Flexural analysis shows two pulses of rapid, foreland-related subsidence first during the Late Cretaceous-early Paleocene and later during the Oligocene-Miocene. Despite the present-day oblique thrusting of the mountain front, flexure of the PFB basement has produced a tectonic forebulge now located in the Eastern structural zone and controls a basement high that forms the eastern, updip limit for most hydrocarbons found in the PFB.

Stratigraphy and sediment signal transmission in a flexural foreland basin dynamically linked to an uplifting range

2020 ◽  
Author(s):  
Laure Guerit ◽  
Delphine Rouby ◽  
Cécile Robin ◽  
François Guillocheau ◽  
Brendan Simon ◽  
...  
Keyword(s):  
Numerical Models ◽  
Accumulation Rate ◽  
Foreland Basin ◽  
Surface Processes ◽  
Precipitation Rate ◽  
Foreland Basins ◽  
Uplift Rate ◽  
Mountain Belts ◽  
Aquitaine Basin ◽  
Topographic Evolution

<p>Foreland basins that develop at the foot of collisional mountain belts accumulate sediments eroded from the ranges. They thus represent valuable archives of the evolution of orogenic systems through time. A few numerical models have investigated the infilling of foreland basins during the growth of an orogenic range and they provide conceptual frameworks for foreland stratigraphy. However, surface processes (erosion, sediment transport and deposition) are often quite basic in these models, and in the last decade, progress has been made in the description of surface processes and its implementation in numerical models. Recently, we developed a landscape evolution model able to describe the evolution of an eroding source coupled to a flexural sedimentary basin (Yuan et al, 2019, JGR; Guerit et al, 2019, Geology). This model takes into account erosion and deposition at the same time, and it thus allows a full dynamical coupling of the range and its foreland. We take advantage of this efficient numerical model to take another look at the stratigraphic evolution of a foreland basin and at the transmission of sediment signal from source to sink. <br>We use the model to simulate the evolution of a flexural retro-foreland basin coupled to an uplifting range and subjected to temporal variations in uplift and precipitation rates. Such variations affect the topography of the range: a lower uplift rate or an higher precipitation lead to a lower range. As a result, because the accommodation space available in the foreland is purely flexural, a decrease in uplift rate or an increase in precipitation rate will be marked by an erosional surface in the foreland basin. On the contrary, an increase in uplift rate or a decrease in precipitation rate will be preserved in the stratigraphy. Interestingly, although the two scenarios induce a different sediment signal from the sources, they are both recorded in the foreland basin as a transient increase in accumulation rate. Such a signal alone can therefore not be used to decipher the type of perturbation that affected the source.<br>Finally, we discuss the evolution of a natural range and coupled foreland basin, the Pyrenees and the Aquitaine Basin. We show that the spatial pattern of sediment deposition in the Aquitaine Basin is very consistent with the topographic evolution of the Pyrenees. However, this topographic evolution is not consistent with the climatic and tectonic reconstruction in the area since the Eocene, opening discussions among others about local vs regional effects. This work is part of the COLORS project, funded by Total.</p>

Factors controlling the interaction between tectonics and surface processes in convergent orogens: insight from analogue and numerical models

2020 ◽  
Author(s):  
Riccardo Reitano ◽  
Claudio Faccenna ◽  
Francesca Funiciello ◽  
Fabio Corbi ◽  
Sean Willett
Keyword(s):  
Landscape Evolution ◽  
Numerical Models ◽  
Tectonic Setting ◽  
Laser Scanner ◽  
Sprinkler System ◽  
Surface Processes ◽  
Oblique View ◽  
Surface Uplift ◽  
Geomorphic Features ◽  
Set Up

<p>Convergent orogens are the best places on Earth for studying the interaction between surface processes and tectonics. They display the highest surface uplift rates and in turn are more likely affected by erosion. The balance between tectonics and erosion is responsible for many aspects in the evolution of a mountain belt. Despite the growth of analysis techniques, our understanding is still limited by the impossibility to observe these processes through their entire evolution. In particular, understanding how single parameters affect the system is necessary to unravel the nature of these multiple-interrelated processes.</p><p>Here we propose a new series of analogue models reproducing a simplified and scaled natural convergent orogenic system, to investigate the evolution of landscapes in which both tectonics and erosion/sedimentation are present. The growth of the orogenic wedge is driven by a rigid plate pushing the rear of the model. Deformed brittle granular material is a mixture of silica powder, glass microbeads and PVC powder. This mixture allows for the observation of both deforming structures and geomorphic features. Erosion is simulated by a water sprinkler system, providing a fine mist as precipitation which collects into simulated rivers, shaping the landscape. The model therefore allows observing the interaction between tectonics and surface processes. We analyze the model evolution monitoring oblique-view with cameras and top-view with a laser scanner. The latter is useful for measuring the mass balance between input fluxes (tectonics) and output fluxes (erosion) and in fulfilling a proper parametric study on the cause-effect relationship. The effect of different parameters on landscape evolution (e.g., precipitation rate, convergence velocity) is investigated systematically.</p><p>Our preliminary results analyze the relationship between single parameters and their effect on the models, allowing a proper definition of the role played in the landscape evolution. We also set up a benchmark with numerical models using DACI3ELVIS code in the same tectonic setting.</p>

From perched high elevation surfaces to sediment entering the foreland: the dynamics of erosion, deformation and landscape evolution in the Argentine Precordillera

2020 ◽  
Author(s):  
Gregory Hoke ◽  
Pedro Val ◽  
Gregory Ruetenik ◽  
Robert Moucha
Keyword(s):  
Numerical Modeling ◽  
Landscape Evolution ◽  
Numerical Models ◽  
Foreland Basin ◽  
Detrital Zircons ◽  
Mountain Range ◽  
Time Lags ◽  
Cosmogenic Nuclide ◽  
Stratigraphic Record ◽  
Argentine Precordillera

<p>The geomorphic processes that control temporal and spatial patterns of erosion, sediment storage and evacuation in an active mountain range (source) have a direct impact on how the signal of tectonics and climate, are recorded in the adjacent sedimentary basins (sinks). Stream power based numerical models of landscape evolution predict strong time lags between rock uplift and waves of erosion in the foreland, but this is difficult to test without proper resolution between source and sink signals..  Confirmation of model results is typically gleaned through observations that are either snapshots of processes in modern systems, or inversion of the stratigraphic record to decipher what occurred in the uplands. While cosmogenic nuclide derived, catchment wide erosion rates in the modern rivers provide a snapshot of processes happening in the last thousands of years, thermochronmeters average over the ≥ millions of years it takes a rock to ascend from the closure isotherm to the Earth’s surface,making it difficult, if not impossible to capture a minimally time averaged signal of the geomorphic system in the stratigraphic record. Paleoerosion rates from the residual cosmogenic nuclide concentration of buried sediments offer a means to bridge the gap in resolution. </p><p> </p><p>This study combines numerical modeling and cosmogenic nuclide paleoerosion rates in the Argentine Precordillera to build a rich picture of how this foreland basin system, from the hinterland through the foreland basin evolves in time and space. Our modeling shows that the dynamics of wedge-top basin formation behind a rising, and then subsequently inactive range have profound and systematic effects on the geomorphic signals both upstream and downstream of the wedge-top basin. Downstream, it is clear that there are strong, million year time lags in the uplift-triggered erosive pulse and spatial controls on where the sediment delivered to the foreland is sourced. Upstream, aggradation in the wedge top leads to the development of a wave of low erosion into the hinterland that results in the creation of perched surfaces coeval to erosive pulses downstream. In the Argentine Precordillera at 30°S an 8 Ma record of paleoerosion rates from the wedge top and foreland basin deposits along with detrital zircons provenance in the foreland largely verifies the predictions of the numerical modeling. Similarly, upstream of the wedge-top basin, there are concordant knickpoints and large, broad planation surfaces perched some 1500 m above the floor of wedge top as predicted by the low erosion wave pulse. Our combination of numerical modeling and paleoerosion rates capture the dynamic evolution of mountain range at million to thousand year timescales. </p>

Post-orogenic sediment drape and flux of mountain range-foreland basin systems: An example from the Northern Pyrenees

2020 ◽  
Author(s):  
Thomas Bernard ◽  
Hugh Sinclair ◽  
Mark Naylor ◽  
Elliot Weir ◽  
Frédéric Christophoul ◽  
...  
Keyword(s):  
Sediment Accumulation ◽  
Foreland Basin ◽  
Sediment Supply ◽  
Sediment Flux ◽  
Crustal Thickening ◽  
Mountain Range ◽  
Foreland Basins ◽  
Isostatic Rebound ◽  
Basin Subsidence ◽  
Mountain Front

<p>The transition from syn- to post-orogenesis is generally identified in foreland basins by a switch from active subsidence and deposition to isostatic rebound and erosion. However, the nature of the interplay between isostatic rebound and sediment supply, and their impact on the topographic evolution of a range and foreland basin during this transition has not been fully explored.</p><p>Here, we use a box model to explore the syn- to post-orogenic evolution of foreland basin/thrust wedge systems. Using a set of parameter values that approximate the northern Pyrenees and the neighbouring Aquitaine foreland basin, we evaluate the controls on: 1) the sediment drape over the frontal parts of the retro-wedge and 2) the sediment accumulation into surrounding continental margins following cessation of crustal thickening. Conglomerate and sandstone sediments preserved at approximately 600 m elevation, which is ~300 m above the present mountain front in the northern Pyrenees record an age of ca. 12 Ma, approximately 8 Myrs younger than the last evidence of crustal thickening in the wedge. These sediments formed a regional drape that reached up to approximately 800 m elevation, but are now preserved in low gradient patches, and are associated with more regional surfaces across the northern Pyrenees. Using the model, this post-orogenic sediment drape can be explained by the combination of a sustained, high sediment influx from the range into the basin relative to the efflux out of the basin, combined with cessation of basin subsidence. The model also predicts higher sediment flux out of the system during the post-orogenic phase involving an increase of sediment accumulation as observed in the Bay of Biscay during this interval.</p><p>Post-orogenic sediment drape and increased sediment flux out the mountain range-foreland basin system are proposed as generic processes of these systems.</p>

Qaanaaq 2001: mineral exploration reconnaissance in North-West Greenland

2002 ◽  
pp. 133-143
Author(s):  
Bjørn Thomassen ◽  
Peter R. Dawes ◽  
Agnete Steenfelt ◽  
Johan Ditlev Krebs
Keyword(s):  
Mineral Exploration ◽  
Mining Industry ◽  
Field Work ◽  
Original Series ◽  
West Greenland ◽  
North West ◽  
Ice Caps ◽  
High Plateau ◽  
Set Up ◽  
Inland Ice

NOTE: This article was published in a former series of GEUS Bulletin. Please use the original series name when citing this article, for example: Thomassen, B., Dawes, P. R., Steenfelt, A., & Krebs, J. D. (2002). Qaanaaq 2001: mineral exploration reconnaissance in North-West Greenland. Geology of Greenland Survey Bulletin, 191, 133-143. https://doi.org/10.34194/ggub.v191.5141 _______________ Project Qaanaaq 2001, involving one season’s field work, was set up to investigate the mineral occurrences and potential of North-West Greenland between Olrik Fjord and Kap Alexander (77°10´N – 78°10´N; Fig. 1). Organised by the Geological Survey of Denmark and Greenland (GEUS) and the Bureau of Minerals and Petroleum (BMP), Government of Greenland, the project is mainly funded by the latter and has the overall goal of attracting the interest of the mining industry to the region. The investigated region – herein referred to as the Qaanaaq region – comprises 4300 km2 of ice-free land centred on Qaanaaq, the administrative capital of Qaanaap (Thule) municipality. Much of the region is characterised by a 500–800 m high plateau capped by local ice caps and intersected by fjords and glaciers. High dissected terrain occurs in Northumberland Ø and in the hinterland of Prudhoe Land where nunataks are common along the margin of the Inland Ice.

scholarly journals Volcanism and Volcanogenic Submarine Sedimentation in the Paleogene Foreland Basins of the Alps: Reassessing the Source-to-Sink Systems with an Actualist View

Geosciences ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 23
Author(s):  
Andrea Di Capua ◽  
Federica Barilaro ◽  
Gianluca Groppelli
Keyword(s):  
Foreland Basin ◽  
Fault System ◽  
Foreland Basins ◽  
The North ◽  
Source To Sink ◽  
The Alps ◽  
Alpine Foreland ◽  
Alpine Foreland Basin ◽  
Tectonic Lineament ◽  
First Time

This work critically reviews the Eocene–Oligocene source-to-sink systems accumulating volcanogenic sequences in the basins around the Alps. Through the years, these volcanogenic sequences have been correlated to the plutonic bodies along the Periadriatic Fault System, the main tectonic lineament running from West to East within the axis of the belt. Starting from the large amounts of data present in literature, for the first time we present an integrated 4D model on the evolution of the sediment pathways that once connected the magmatic sources to the basins. The magmatic systems started to develop during the Eocene in the Alps, supplying detritus to the Adriatic Foredeep. The progradation of volcanogenic sequences in the Northern Alpine Foreland Basin is subsequent and probably was favoured by the migration of the magmatic systems to the North and to the West. At around 30 Ma, the Northern Apennine Foredeep also was fed by large volcanogenic inputs, but the palinspastic reconstruction of the Adriatic Foredeep, together with stratigraphic and petrographic data, allows us to safely exclude the Alps as volcanogenic sources. Beyond the regional case, this review underlines the importance of a solid stratigraphic approach in the reconstruction of the source-to-sink system evolution of any basin.

Leakage Flow Investigations on a Through-Wall Crack Related to Thermal Fatigue of Nuclear Power Plant Piping

2017 ◽  
Author(s):  
Stefan Schmid ◽  
Rudi Kulenovic ◽  
Eckart Laurien
Keyword(s):  
Experimental Data ◽  
Nuclear Power ◽  
Numerical Models ◽  
Measurement Techniques ◽  
Experimental Investigations ◽  
Leakage Flow ◽  
Test Rig ◽  
Reduced Pressure ◽  
Flow Rates ◽  
Set Up

For the validation of empirical models to calculate leakage flow rates in through-wall cracks of piping, reliable experimental data are essential. In this context, the Leakage Flow (LF) test rig was built up at the IKE for measurements of leakage flow rates with reduced pressure (maximum 1 MPA) and temperature (maximum 170 °C) compared to real plant conditions. The design of the test rig enables experimental investigations of through-wall cracks with different geometries and orientations by means of circular blank sheets with integrated cracks which are installed in the tubular test section of the test rig. In the paper, the experimental LF set-up and used measurement techniques are explained in detail. Furthermore, first leakage flow measurement results for one through-wall crack geometry and different imposed fluid pressures at ambient temperature conditions are presented and discussed. As an additional aspect the experimental data are used for the determination of the flow resistance of the investigated leak channel. Finally, the experimental results are compared with numerical results of WinLeck calculations to prove specifically in WinLeck implemented numerical models.

Assessment of Radius of Investigation of Pressure Transient Analysis in Highly Heterogeneous Reservoirs

2021 ◽  
Author(s):  
Murat Zeybek ◽  
Lei Jiang ◽  
Hadrien Dumont
Keyword(s):  
Transient Analysis ◽  
Numerical Models ◽  
Heterogeneous Systems ◽  
Layered Systems ◽  
Pressure Transient ◽  
Heterogeneous Reservoirs ◽  
Geological Features ◽  
Heterogeneous Formations ◽  
Set Up ◽  
New Generation

Abstract The radius of investigation (ROI) of pressure transient analyses has been traditionally assessed using analytical formulations with basic reservoir parameters for homogenous systems. Numerous studies aimed to improve ROI formulations to incorporate all reservoir and testing parameters such as gauge resolution and rate for more accurate ROI assessments. However, new generation wireline formation testers aim to improve deep transient tests with significant developments in gauge resolution and increasing rate. Challenges still remain in heterogeneous formations such as shaly sands and carbonate reservoirs. In this study, detailed conceptual high-resolution numerical models are set up, including comprehensive reservoir and measurement parameters, to investigate more realistic ROI assessments in layered heterogeneous systems without and with hydraulic communication. Several conceptual examples are presented in layered systems with permeability contrasts. In addition, deviation from infinite-acting radial flow (IAFR) and pressure propagation in highly heterogeneous layered systems are investigated to detect the presence of geological features, including closed boundary systems and the presence of a fault in the proximity of wellbore.

Sign in / Sign up

Export Citation Format

Share Document