scholarly journals GPR signature of Quaternary faulting: a study from the Mt. Pollino region, southern Apennines, Italy

2021 ◽  
Author(s):  
Maurizio Ercoli ◽  
Daniele Cirillo ◽  
Cristina Pauselli ◽  
Harry M. Jol ◽  
Francesco Brozzetti
Keyword(s):  
Late Quaternary ◽  
Active Faults ◽  
Normal Fault ◽  
Data Interpretation ◽  
Seismic Gap ◽  
Southern Apennines ◽  
Near Surface ◽  
Radar Images ◽  
Sedimentary Fill ◽  
Continental Basin

Abstract. With the aim of unveiling evidence of Late Quaternary faulting, a series of Ground Penetrating Radar (GPR) profiles were acquired across the Campotenese continental basin (Mt. Pollino region) in the southern Apennines active extensional belt (Italy). A set of forty-nine 300 MHz and 500 MHz GPR profiles, traced nearly perpendicular to a buried normal fault, were acquired and carefully processed through a customized workflow. The data interpretation allowed us to reconstruct a pseudo-3D model depicting the boundary between the Mesozoic bedrock and the sedimentary fill of the basin, which were in close proximity to the fault. Once reviewing and defining the GPR signature of faulting, we highlight in our data how near surface alluvial and colluvial sediments appear to be dislocated by a set of conjugate (west and east-dipping) discontinuities that penetrate inside the underlying Triassic dolostones. Close to the contact between the continental deposits and the bedrock, some buried scarps which offset wedge-shaped deposits are interpreted as coseismic ruptures, subsequently sealed by later deposits. Although the use of pseudo-3D GPR data implies more complexity linking the geophysical features among the radar images, we have reconstructed a reliable subsurface fault pattern, discriminating master faults and a series of secondary splays. We believe our contribution provides an improvement in the characterization of active faults in the study area which falls within the Pollino seismic gap and is considered potentially prone to severe surface faulting. Our aim is for our approach and workflow to be of inspiration for further studies in the region as well as for similar high seismic hazard areas characterized by scarcity of near-surface data.

scholarly journals Ground-penetrating radar signature of Quaternary faulting: a study from the Mt. Pollino region, southern Apennines, Italy

Solid Earth ◽  
2021 ◽  
Vol 12 (11) ◽  
pp. 2573-2596
Author(s):  
Maurizio Ercoli ◽  
Daniele Cirillo ◽  
Cristina Pauselli ◽  
Harry M. Jol ◽  
Francesco Brozzetti
Keyword(s):  
Ground Penetrating Radar ◽  
Late Quaternary ◽  
Normal Fault ◽  
Data Interpretation ◽  
Seismic Gap ◽  
Southern Apennines ◽  
Near Surface ◽  
3D Gpr ◽  
2D Data ◽  
Ground Penetrating

Abstract. With the aim of unveiling evidence of Late Quaternary faulting, a series of ground-penetrating radar (GPR) profiles were acquired across the southern portion of the Fosso della Valle–Campotenese normal fault (VCT), located at the Campotenese continental basin (Mt. Pollino region) in the southern Apennines active extensional belt (Italy). A set of 49 GPR profiles, traced nearly perpendicular to this normal fault, was acquired using 300 and 500 MHz antennas and carefully processed through a customized workflow. The data interpretation allowed us to reconstruct a pseudo-3D model depicting the boundary between the Mesozoic bedrock and the sedimentary fill of the basin, which were in close proximity to the fault. Once the GPR signature of faulting was reviewed and defined, we interpret near-surface alluvial and colluvial sediments dislocated by a set of conjugate (W- and E-dipping) discontinuities that penetrate inside the underlying Triassic dolostones. Close to the contact between the continental deposits and the bedrock, some buried scarps which offset wedge-shaped deposits are interpreted as coseismic ruptures, subsequently sealed by later deposits. Our pseudo-3D GPR dataset represented a good trade-off between a dense 3D-GPR volume and conventional 2D data, which normally requires a higher degree of subjectivity during the interpretation. We have thus reconstructed a reliable subsurface fault pattern, discriminating master faults and a series of secondary splays. This contribution better characterizes active Quaternary faults in an area which falls within the Pollino seismic gap and is considered prone to severe surface faulting. Our results encourage further research at the study site, whilst we also recommend our workflow for similar regions characterized by high seismic hazard and scarcity of near-surface geophysical data.

scholarly journals Late Quaternary faulting in southern Matese (central Italy): implications for earthquake potential in the southern Apennines

2021 ◽  
Author(s):  
Paolo Boncio ◽  
Eugenio Auciello ◽  
Vincenzo Amato ◽  
Pietro Aucelli ◽  
Paola Petrosino ◽  
...  
Keyword(s):  
Late Quaternary ◽  
Central Italy ◽  
Slip Rate ◽  
Normal Fault ◽  
Historical Earthquakes ◽  
Fault System ◽  
Southern Apennines ◽  
Mountain Front ◽  
Point Data ◽  
Earthquake Potential

Abstract. We studied in detail the Gioia Sannitica active normal fault (GF) along the Southern Matese Fault system in the southern Apennines of Italy. The current activity of the fault system and its potential to produce strong earthquakes have been underestimated so far, and are now defined. Precise mapping of the GF fault trace on a 1 : 20,000 geological map and several point data on geometry, kinematics and throw rate are made available in electronic format. The GF, and in general the entire fault system along the southern Matese mountain front, is made of slowly-slipping faults, with a long active history revealed by the large geologic offsets, mature geomorphology, and complex fault pattern and kinematics. Present activity has resulted in Late Quaternary fault scarps resurrecting the foot of the mountain front, and Holocene surface faulting. The slip rate varies along-strike, with maximum Late Pleistocene – Holocene throw rate of ~0.5 mm/yr. Activation of the 11.5 km-long GF can produce up to M 6.1 earthquakes. If activated together with the 18 km-long Ailano-Piedimonte Matese fault (APMF), the seismogenic potential would be M 6.8. The slip history of the two faults is compatible with a contemporaneous rupture. The observed Holocene displacements on the GF and APMF are compatible with activations during some poorly known historical earthquakes, such as the 1293 (M 5.8), 1349 (M 6.8; southern prolongation of the rupture on the Aquae Iuliae fault?) and CE 346 earthquakes. A fault rupture during the 847 poorly-constrained historical earthquake is also compatible with the dated displacements.

scholarly journals Inference of a seismic gap from geological data: Thessaly ( Central Greece) as a case study

1995 ◽  
Vol 38 (1) ◽  
Author(s):  
R. Caputo
Keyword(s):  
Late Quaternary ◽  
Active Faults ◽  
Slip Rate ◽  
Morphological Data ◽  
Tectonic Activity ◽  
Seismic Gap ◽  
Microseismic Activity ◽  
Two Sectors

As a result of neotectonic, morphotectonic and seismotectonic research it is now possible to draw detailed maps of the major active faults affecting Thessaly, a large region of continental Greece. For many of these faults, where specific studies have been carried out, the degree of fault activity (i.e. the long-term slip-rate) has been also assigned ranging from 0.05 to 4 mm/yr-l. In the present work, the main morphotectonic features and seismotectonic characteristics of the more important faults are recalled from previous works, while the recent tectonic activity is compared with the seismic activity of the area. The occuuence of both large (M ?x2264; 6.0) and moderate (M ?x2265; 6.0) earthquakes during the present century is concentrated in the southern sector. Earthquakes have been virtually absent in the northern part of the region during the same period. In contrast, according to geological and geomorphological criteria, the recent (Late Quaternary) tectonic evolution of the region and the overall extensional rate do not seem to djffer significantly in the two sectors. Although palaeosejsmological trenches, geodetic surveying and the record of the microseismic activity may enhance our knowledge of this problem, on the basis of available geological (structural and morphological) data, it is likely that the northern sector of Thessaly represents a large seismic gap. The implications on seismic hazard in one of the more populated regions of Greece are also discussed.

scholarly journals Holocene surface-rupturing earthquakes on the Dinaric Fault System, western Slovenia

Solid Earth ◽  
2021 ◽  
Vol 12 (10) ◽  
pp. 2211-2234
Author(s):  
Christoph Grützner ◽  
Simone Aschenbrenner ◽  
Petra Jamšek Rupnik ◽  
Klaus Reicherter ◽  
Nour Saifelislam ◽  
...  
Keyword(s):  
Late Quaternary ◽  
Active Faults ◽  
Historical Seismicity ◽  
Fault System ◽  
Historical Event ◽  
Near Surface ◽  
Geological Evidence ◽  
Geophysical Surveys ◽  
Deformation Features ◽  
Surface Ruptures

Abstract. The Dinaric Fault System in western Slovenia, consisting of NW–SE-trending, right-lateral strike-slip faults, accommodates the northward motion of Adria with respect to Eurasia. These active faults show a clear imprint in the morphology, and some of them hosted moderate instrumental earthquakes. However, it is largely unknown if the faults also had strong earthquakes in the late Quaternary. This hampers our understanding of the regional tectonics and the seismic hazard. Geological evidence of co-seismic surface ruptures only exists for one historical event, the 1511 Idrija earthquake with a magnitude of ∼ M 6.8, but the causative fault is still disputed. Here we use geomorphological data, near-surface geophysical surveys, and paleoseismological trenching to study two of these faults: the Predjama Fault and the Idrija Fault. In a paleoseismological trench across the Predjama Fault we found deformation features that may have been caused by an earthquake between 13–0.7 ka, very likely not earlier than 8.4 ka. At the Idrija Fault, a surface-rupturing earthquake happened around 2.5 ka. We show that instrumental and historical seismicity data do not capture the strongest events in this area.

scholarly journals Holocene surface rupturing earthquakes on the Dinaric Fault System, western Slovenia

2021 ◽  
Author(s):  
Christoph Grützner ◽  
Simone Aschenbrenner ◽  
Petra Jamšek Rupnik ◽  
Klaus Reicherter ◽  
Nour Saifelislam ◽  
...  
Keyword(s):  
Late Quaternary ◽  
Active Faults ◽  
Historical Seismicity ◽  
Fault System ◽  
Historical Event ◽  
Near Surface ◽  
Geological Evidence ◽  
Strong Earthquakes ◽  
Geophysical Surveys ◽  
Seismic Moment Release

Abstract. The Dinaric Fault System in western Slovenia, consisting of NW-SE trending, right-lateral strike-slip faults, accommodates the northward motion of Adria with respect to Eurasia. These active faults show a clear imprint in the morphology and some of them hosted moderate instrumental earthquakes. However, it is largely unknown if the faults also had strong earthquakes in the Late Quaternary. This hampers our understanding of the regional tectonics and the seismic hazard. Geological evidence of co-seismic surface ruptures only exists for one historical event, the 1511 Idrija Earthquake with a magnitude of ~M6.8, but the causative fault is still disputed. Here we use geomorphological data, near-surface geophysical surveys, and paleoseismological trenching to show that two of these faults, the Predjama Fault and the Idrija Fault ruptured in strong earthquakes in the Holocene. In a paleoseismological trench across the Predjama Fault we found at least one earthquake with a minimum magnitude of MW6.1 that occurred between 13–0.7 ka, very likely not earlier than 8.4 ka. At the Idrija Fault, a surface-rupturing earthquake with a magnitude of at least MW6.1 happened in the last ~2.1 ka. This event could correspond to the 1511 Idrija earthquake. Our results show that the faults rupture in rare, but strong earthquakes, which dominate the seismic moment release. We show that instrumental and historical seismicity data do not capture the strongest events in this area. The fact that many of the NW-SE trending, parallel faults are active implies that the deformation in western Slovenia is distributed, rather than focussed on one major structure.

scholarly journals Seismogenesis in Central Apennines, Italy: an integrated analysis of minor earthquake sequences and structural data in the Amatrice-Campotosto area

2009 ◽  
Vol 47 (6) ◽  
Author(s):  
P. Boncio ◽  
G. Lavecchia ◽  
G. Milana ◽  
B. Rozzi
Keyword(s):  
Late Quaternary ◽  
Central Italy ◽  
Normal Fault ◽  
Structural Data ◽  
Integrated Analysis ◽  
Fault Plane Solutions ◽  
Small Magnitude ◽  
Fault Surface ◽  
Displacement Profile ◽  
Earthquake Sequences

We present a seismotectonic study of the Amatrice-Campotosto area (Central Italy) based on an integrated analysis of minor earthquake sequences, geological data and crustal rheology. The area has been affected by three small-magnitude seismic sequences: August 1992 (M=3.9), June 1994 (M=3.7) and October 1996 (M=4.0). The hypocentral locations and fault plane solutions of the 1996 sequence are based on original data; the seismological features of the 1992 and 1994 sequences are summarised from literature. The active WSWdipping Mt. Gorzano normal fault is interpreted as the common seismogenic structure for the three analysed sequences. The mean state of stress obtained by inversion of focal mechanisms (WSW-ENE-trending deviatoric tension) is comparable to that responsible for finite Quaternary displacement, showing that the stress field has not changed since the onset of extensional tectonics. Available morphotectonic data integrated with original structural data show that the Mt. Gorzano Fault extends for ~28 km along strike. The along-strike displacement profile is typical of an isolated fault, without significant internal segmentation. The strong evidence of late Quaternary activity in the southern part of the fault (with lower displacement gradient) is explained in this work in terms of displacement profile readjustment within a fault unable to grow further laterally. The depth distribution of seismicity and the crustal rheology yield a thickness of ~15 km for the brittle layer. An area of ~530 km2 is estimated for the entire Mt. Gorzano Fault surface. In historical times, the northern portion of the fault was probably activated during the 1639 Amatrice earthquake (I = X, M~ 6.3), but this is not the largest event we expect on the fault. We propose that a large earthquake might activate the entire 28 km long Mt. Gorzano Fault, with an expected Mmax up to 6.7.

scholarly journals IDENTIFYING FAULT ACTIVITY IN THE CENTRAL EVOIKOS GULF (GREECE)

2018 ◽  
Vol 40 (1) ◽  
pp. 439 ◽  
Author(s):  
Th. Rondoyanni ◽  
D. Galanakis ◽  
Ch. Georgiou ◽  
I. Baskoutas
Keyword(s):  
Late Quaternary ◽  
Active Faults ◽  
Point Of View ◽  
Geological Mapping ◽  
Normal Faults ◽  
Geophysical Research ◽  
Alluvial Deposits ◽  
Moderate Seismicity ◽  
Limestone Bedrock ◽  
Topographic Relief

Geological mapping on a 1:5.000 scale and a tectonic analysis in the wider Chalkida region of the Island of Evia and the adjacent Drossia area of Central Greece, have allowed the identification of a number of active and potentially active normal faults. These faults have been formed or reactivated during the Late Quaternary, since they affect Pleistocene brackish and terrestrial deposits. Some of the faults affect the contact of the limestone bedrock with the Quaternary formations, presenting characteristic polished surfaces. The faults, in places covered by the alluvial deposits of the Chalkida plain, are also detected by geophysical research. Among the identified faults, the most important are considered the Aghios Minas- Chalkida, the Avlida and the Lefkadi active faults. The first one extends from Drossia to the Chalkida area, crossing the sea straights, and has an ENE-WSW direction and a south dip. The other two, are parallel antithetic faults oriented WNW-ESE, and bound the South Evoikos Gulf on the Greek mainland and the Evia Island respectively. The mapping and evaluation of active faults in this region of moderate seismicity, with low topographic relief and consequent absence of morphotectonic features, is especially important from a seismic hazard point of view.

scholarly journals Identification of Paleoearthquakes and Coseismic Slips on a Normal Fault Using High-Precision Quantitative Morphology: Application to the Jiaocheng Fault in the Shanxi Rift, China

Lithosphere ◽  
2021 ◽  
Vol 2021 (Special 2) ◽  
Author(s):  
Junjie Zou ◽  
Honglin He ◽  
Yusuke Yokoyama ◽  
Adam D. Sproson ◽  
Yoshiki Shirahama ◽  
...  
Keyword(s):  
Active Faults ◽  
Normal Fault ◽  
Seismic Events ◽  
Quantitative Morphology ◽  
Coseismic Slip ◽  
Slip History ◽  
Absolute Dating ◽  
Future Work ◽  
Shanxi Rift

Abstract The quantitative morphology of bedrock fault surfaces combined with aerial surveys and field identification is a useful approach to identify paleoearthquakes, obtain coseismic slips, and evaluate the seismogenic capacity of active faults in bedrock areas where traditional trenching methods are not applicable. Here, we report a case study of the Jiaocheng Fault (JCF) in the Shanxi Rift, China. Although several studies have been conducted on the JCF, its coseismic slip history and seismogenic capacity are still unclear. To address these problems, we investigated two bedrock fault surfaces, Sixicun (SXC) and Shanglanzhen (SLZ), on the JCF’s northern segment using quantitative morphological analysis together with aerial and field surveys. Quantitative fractal analysis based on the isotropic empirical variogram and moving window shows that both bedrock fault surfaces have the characteristics of vertical segmentation, which is likely due to periodic earthquakes, the coseismic slip of which can be determined by the height of the segments. Three seismic events at SXC, with a coseismic vertical slip of 1.74, 1.65, and 1.99 m, and three seismic events at SLZ, with a coseismic vertical slip of 1.32, 2.35, and 1.88 m, are identified. Compared with the previous studies, these three seismic events may occur in the Holocene, but it requires absolute dating ages to support, which is also the focus of our future work. Considering the seismologic capability (M>7.5) and the relationship between the recurrence interval of ~2.6 kyr and elapsed time of more than 3 kyr, the seismic hazard of the northern and middle segments of the JCF requires immediate attention.

Do active faults’ clay mineral compositions affect whether earthquake ruptures they host will displace the surface?

2021 ◽  
Author(s):  
Selina S. Fenske ◽  
Virginia G. Toy ◽  
Bernhard Schuck ◽  
Anja M. Schleicher ◽  
Klaus Reicherter
Keyword(s):  
Fault Zone ◽  
Clay Mineral ◽  
Active Faults ◽  
Surface Displacement ◽  
Surface Rupture ◽  
Near Surface ◽  
Ground Shaking ◽  
Physical Measurements ◽  
Surface Displacements ◽  
Earthquake Ruptures

<p>The tectonophysical paradigm that earthquake ruptures should not start, or easily propagate into, the shallowest few kilometers of Earth’s crust makes it difficult to understand why damaging surface displacements have occurred during historic events. The paradigm is supported by decades of analyses demonstrating that near the surface, most major fault zones are composed of clay minerals – particularly extraordinarily weak smectites – which most laboratory physical measurements suggest should prevent surface rupture if present. Recent studies of New Zealand’s Alpine Fault Zone (AFZ) demonstrate smectites are absent from some near surface fault outcrops, which may explain why this fault was able to offset the surface locally in past events. The absence of smectites in places within the AFZ can be attributed to locally exceptionally high geothermal gradients related to circulation of meteoric (surface-derived) water into the fault zone, driven by significant topographic gradients. The record of surface rupture of the AFZ is heterogeneous, and no one has yet systematically examined the distribution of segments devoid of evidence for recent displacement. There are significant implications for seismic hazard, which comprises both surface displacements and ground shaking with intensity related to the area of fault plane that ruptures (which will be reduced if ruptures do not reach the surface).  We will present results of new rigorous XRD clay mineral analyses of AFZ principal slip zone gouges that indicate where smectites are present, and consider if these display systematic relationships to surface displacement records. We also plan to apply the same methodology to the Carboneras Fault Zone in Spain, and the infrequent Holocene-active faults in Western Germany.</p>

Delineating active faults across the Narmada-Son Lineament (NSL), India using the technique of Fracture Induced Electromagnetic Radiation (FEMR)

2021 ◽  
Author(s):  
Shreeja Das ◽  
Jyotirmoy Mallik
Keyword(s):  
Electromagnetic Radiation ◽  
Process Zone ◽  
Active Faults ◽  
Central India ◽  
Earthquake Forecasting ◽  
Tectonic Activity ◽  
Eurasian Plate ◽  
Near Surface ◽  
Crustal Stresses ◽  
Tectonically Active

<p>The Fracture Induced Electromagnetic Radiation (FEMR) technique has gradually progressed in the past decade as a useful geophysical tool to determine the direction and magnitude of recent crustal stresses, visualize the modification and realignment of stresses inside tunnels thus proving to be an important precursor for geohazards, earthquake forecasting, as well as delineate landslide-prone slip planes in unstable regions. Its working principle is based on the generation of geogenic electromagnetic radiation emanating from the brittle rock bodies that are fractured being subjected to an incremental increase of the differential stress in the near-surface of the Earth’s crust. The “Process zone” at the fractured crack tip contains numerous microcracks which subsequently creates dipoles due to the polarization of charges on such microcrack tips which rapidly oscillates emitting FEMR waves of frequencies between KHz to MHz range. The coalescence of the microcracks eventually leads to a macro failure dampening the amplitude of the FEMR pulses. The attenuation of FEMR pulses is comparatively lesser than seismic waves making it a more efficient precursor to potential tectonic activities indicating an upcoming earthquake a few hours/days before the actual event. In the current study, we have attempted to exploit this technique to identify the locations of the potential active faults across the tectonically active Narmada-Son Lineament (NSL), Central India. Although the first tectonic stage involved rifting and formation of the NSL during the Precambrian time, the rifting continued at least till the time of Gondwana deposition. Later, tectonic inversion took place as a result of the collision between the Indian and the Eurasian plate resulting in reverse reactivation of the faults. Episodic reverse movement along NSL caused recurrent earthquakes and linear disposition of the sediments that were deposited at the foothills of the Satpura Horst. Although the origin of East-West trending NSL dates back to the Precambrian time, it is very much tectonically active as manifested by recent earthquakes. The study has been conducted by taking linear FEMR readings across 3 traverses along the NSL which on analysis provides an idea about the potential active faults, their locations, and frequency of occurrence. The accumulation of strain in the brittle rocks that can eventually lead to a macro failure is demarcated as an anomalous increase in the amplitude of the FEMR pulses indicative of an upcoming tectonic episode in the region. To further corroborate the analysis, we have attempted to determine the neo-tectonic activity in the region by calculating the morphometric parameters across the Khandwa-Itarsi-Jabalpur region, Central India. Finally, we attempt to comment on the tectonic evolution of Central India in the recent past. We also encourage researchers to adapt the novel technique of FEMR which is swift, affordable, and feasible compared to conventional techniques deployed to survey the active tectonics of a region.</p>

Sign in / Sign up

Export Citation Format

Share Document