scholarly journals Observations of seasonal and diurnal glacier velocities at Mount Rainier, Washington using terrestrial radar interferometry

2015 ◽  
Vol 9 (4) ◽  
pp. 4067-4116
Author(s):  
K. E. Allstadt ◽  
D. E. Shean ◽  
A. Campbell ◽  
M. Fahnestock ◽  
S. D. Malone

Abstract. We present spatially continuous velocity maps using repeat terrestrial radar interferometry (TRI) measurements to examine seasonal and diurnal dynamics of alpine glaciers at Mount Rainier, Washington. We show that the Nisqually and Emmons glaciers have small slope-parallel velocities near the summit (< 0.2 m day−1), high velocities over their upper and central regions (1.0–1.5 m day−1), and stagnant debris-covered regions near the terminus (< 0.05 m day−1). Velocity uncertainties are as low as ±0.02–0.08 m day−1. We document a large seasonal velocity decrease of 0.2–0.7 m day−1 (−25 to −50 %) from July to November for most of the Nisqually glacier, excluding the icefall, suggesting significant seasonal subglacial water storage under most of the glacier. We did not detect diurnal variability above the noise level. Preliminary 2-D ice flow modeling using TRI velocities suggests that sliding accounts for roughly 91 and 99 % of the July velocity field for the Emmons and Nisqually glaciers, respectively. We validate our observations against recent in situ velocity measurements and examine the long-term evolution of Nisqually glacier dynamics through comparisons with historical velocity data. This study shows that repeat TRI measurements with > 10 km range can be used to investigate spatial and temporal variability of alpine glacier dynamics over large areas, including hazardous and inaccessible areas.

2015 ◽  
Vol 9 (6) ◽  
pp. 2219-2235 ◽  
Author(s):  
K. E. Allstadt ◽  
D. E. Shean ◽  
A. Campbell ◽  
M. Fahnestock ◽  
S. D. Malone

Abstract. We present surface velocity maps derived from repeat terrestrial radar interferometry (TRI) measurements and use these time series to examine seasonal and diurnal dynamics of alpine glaciers at Mount Rainier, Washington. We show that the Nisqually and Emmons glaciers have small slope-parallel velocities near the summit (< 0.2 m day−1), high velocities over their upper and central regions (1.0–1.5 m day−1), and stagnant debris-covered regions near the terminus (< 0.05 m day−1). Velocity uncertainties are as low as &amp;pm;0.02–0.08 m day−1. We document a large seasonal velocity decrease of 0.2–0.7 m day−1 (−25 to −50 %) from July to November for most of the Nisqually Glacier, excluding the icefall, suggesting significant seasonal subglacial water storage under most of the glacier. We did not detect diurnal variability above the noise level. Simple 2-D ice flow modeling using TRI velocities suggests that sliding accounts for 91 and 99 % of the July velocity field for the Emmons and Nisqually glaciers with possible ranges of 60–97 and 93–99.5 %, respectively, when considering model uncertainty. We validate our observations against recent in situ velocity measurements and examine the long-term evolution of Nisqually Glacier dynamics through comparisons with historical velocity data. This study shows that repeat TRI measurements with > 10 km range can be used to investigate spatial and temporal variability of alpine glacier dynamics over large areas, including hazardous and inaccessible areas.


2006 ◽  
Vol 3 (1) ◽  
pp. 3 ◽  
Author(s):  
Sarah Gray ◽  
Grady Hanrahan ◽  
Ian McKelvie ◽  
Alan Tappin ◽  
Florence Tse ◽  
...  

Environmental Context.Eutrophication is a growing problem globally, and it has significant ecological and socio-economic consequences. Understanding the causes of eutrophication requires a knowledge of nutrient biogeochemistry in aquatic systems. Owing to the high spatial and temporal variability of nutrients in these systems, there is a need for autonomous in situ measurement techniques with rapid response and the ability to collect long-term data. Flow injection analysis is one technique that meets these demands. Abstract.Flow analysis offers a versatile and powerful approach to monitoring of the aquatic environment. The present review highlights the drivers for determining macro- and micro-nutrients in marine and fresh waters, and outlines the instrumental requirements for in situ instrumentation. The principles of flow analysis, specifically flow injection and derivative techniques, and the chemical bases for macro- and micro-nutrient detection are discussed, and key examples of suitable approaches are considered. The successful deployment of flow analysis nutrient monitoring systems for spatial and temporal measurements is illustrated by specific examples relating to surface transects, depth profiles and temporal deployments. Finally, the challenges and imperatives of research in this area are outlined.


1987 ◽  
Vol 33 (115) ◽  
pp. 315-318 ◽  
Author(s):  
Stefan Hastenrath

AbstractThe second 4 year phase of a long-term observation program on Lewis Glacier, Mount Kenya, was completed in March 1986. As for the 1978–82 interval, net-balance results at a stake network and repeated mapping of the ice-surface topography allowed assessment of the mass economy by both “glaciological” and “geodetic” methods.The general findings from the 1978–82 observations are confirmed: the vertical flow component is directed downward in the upper glacier, and upward in the lower glacier; surface lowering and negative net balance increase down-glacier; ice flow mitigates surface lowering by the negative net balance in the lower glacier, but enhances it in the upper glacier. However, the major difference between the 1982–86 and 1978–82 periods is the progressive slow-down of ice flow. This entails a reduction of mass redistribution, in consequence of which the surface lowering becomes increasingly dependent on thein-situnet balance. It is expected that this circumstance will simplify any inference on future glacier behavior.


2021 ◽  
Author(s):  
Matthias M. Frey ◽  
Frank Hase ◽  
Thomas Blumenstock ◽  
Darko Dubravica ◽  
Jochen Groß ◽  
...  

Abstract. In this study we present column-averaged dry-air mole fractions of CO2 (XCO2), CH4 (XCH4) and CO (XCO) from a recently established measurement site in Gobabeb, Namibia. Gobabeb is a hyperarid desert site at the sharp transition zone between the sand desert and the gravel plains, offering unique characteristics with respect to surface albedo properties. Measurements started January 2015 and are performed utilizing a ground-based Fourier transform infrared (FTIR) EM27/SUN spectrometer of the COllaborative Carbon Column Observing Network (COCCON). Gobabeb is the first measurement site observaing XCO2 and XCH4 on the African mainland and improves the global coverage of ground-based remote-sensing sites. In order to achieve the high level of precision and accuracy necessary for meaningful greenhouse gas observations, we performed calibration measurements for eight days between November 2015 and March 2016 with the COCCON reference EM27/SUN spectrometer operated at the Karlsruhe Institute of Technology. We derived scaling factors for XCO2, XCH4 and XCO with respect to the reference instrument that are close to 1.0. We compare the results obtained in Gobabeb to measurements at Reunion Island and Lauder from the Total Carbon Column Observing Network (TCCON). We choose these TCCON sites because, while 4000 km apart, the instruments at Gobabeb and Reunion Island operate at roughly the same latitude. The Lauder station is the southernmost TCCON station and functions as a background site without a pronounced XCO2 seasonal cycle. We find a good agreement for the absolute Xgas values and representative diurnal variability. Together with the absence of long term drifts this highlights the quality of the COCCON measurements. In Southern hemispheric summer we observe lower XCO2 values at Gobabeb compared to the TCCON stations, likely due to the influence of the African biosphere. We performed coincident measurements with the Greenhouse Gases Observing Satellite (GOSAT), where GOSAT observed three nearby specific observation points, over the sand desert south of the station, directly over Gobabeb and over the gravel plains to the north. GOSAT H-gain XCO2 and XCH4 agree with the EM27/SUN measurements within the 1 σ uncertainty limit. The number of coincidence soundings is limited, but we confirm a bias of 1.2–2.6 ppm between GOSAT M-gain and H-gain XCO2 soundings depending on the target point. This is in agreement with results reported by a previous study and the GOSAT validation team. We also report a bias of 5.9–9.8 ppb between GOSAT M-gain and H-gain XCH4 measurements which is within the range given by the GOSAT validation team. Finally we use the COCCON measurements to evaluate inversion-optimized CAMS model data. For XCO2 we find high biases of 0.9 &amp;pm; 0.5 ppm for the OCO-2 assimilated product and 1.1 &amp;pm; 0.6 ppm for the in situ-driven product with R2 > 0.9 in both cases. These biases are comparable to reported offsets between the model and TCCON data. The OCO-2 assimilated model product is able to reproduce the drawdown of XCO2 observed by the COCCON instrument beginning of 2017, opposed to the in situ-optimized product. Also for XCH4 the observed biases are in line with prior model comparisons with TCCON.


1987 ◽  
Vol 33 (115) ◽  
pp. 315-318 ◽  
Author(s):  
Stefan Hastenrath

AbstractThe second 4 year phase of a long-term observation program on Lewis Glacier, Mount Kenya, was completed in March 1986. As for the 1978–82 interval, net-balance results at a stake network and repeated mapping of the ice-surface topography allowed assessment of the mass economy by both “glaciological” and “geodetic” methods.The general findings from the 1978–82 observations are confirmed: the vertical flow component is directed downward in the upper glacier, and upward in the lower glacier; surface lowering and negative net balance increase down-glacier; ice flow mitigates surface lowering by the negative net balance in the lower glacier, but enhances it in the upper glacier. However, the major difference between the 1982–86 and 1978–82 periods is the progressive slow-down of ice flow. This entails a reduction of mass redistribution, in consequence of which the surface lowering becomes increasingly dependent on the in-situ net balance. It is expected that this circumstance will simplify any inference on future glacier behavior.


2019 ◽  
Vol 11 (12) ◽  
pp. 1488 ◽  
Author(s):  
Songtao Ai ◽  
Xi Ding ◽  
Jiachun An ◽  
Guobiao Lin ◽  
Zemin Wang ◽  
...  

Ice flow velocity is a sensitive indicator of glacier variations both controlling and representing the delivery of ice and affecting the future stability of ice masses in a warming climate. As one of the poly-thermal glaciers in the high Arctic, Austre Lovénbreen (AL) is on the northwestern coast of Spitsbergen, Svalbard. The ice flow velocity of AL was investigated using in situ global positioning system (GPS) observations over 14 years and numerical modelling with Elmer/Ice. First, the ice flow velocity field of AL along central flow line was presented and the ice flow velocity is approximately 4 m/a. Obvious seasonal changes of ice flow velocity can be found in the middle of the glacier, where the velocity in spring-summer is 47% larger than in autumn–winter in 2016, and the mean annual velocity increased 14% from 2009 until 2016. Second, the numerical simulation was performed considering the poly-thermal character of the glacier, and indicated that there are two peak ice flow regions on the glacier, and not just one peak ice flow region as previously believed. The new peak ice flow zone found by simulation was verified by field work, which also demonstrated that the velocity of the newly identified zone is 8% faster than the previously identified zone. Third, although our field observations showed that the ice flow velocity is slowly increasing recently, the maximum ice flow velocity will soon begin to decrease gradually in the long term according to glacier evolution modelling of AL.


2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Sungmin O. ◽  
Rene Orth

AbstractWhile soil moisture information is essential for a wide range of hydrologic and climate applications, spatially-continuous soil moisture data is only available from satellite observations or model simulations. Here we present a global, long-term dataset of soil moisture derived through machine learning trained with in-situ measurements, SoMo.ml. We train a Long Short-Term Memory (LSTM) model to extrapolate daily soil moisture dynamics in space and in time, based on in-situ data collected from more than 1,000 stations across the globe. SoMo.ml provides multi-layer soil moisture data (0–10 cm, 10–30 cm, and 30–50 cm) at 0.25° spatial and daily temporal resolution over the period 2000–2019. The performance of the resulting dataset is evaluated through cross validation and inter-comparison with existing soil moisture datasets. SoMo.ml performs especially well in terms of temporal dynamics, making it particularly useful for applications requiring time-varying soil moisture, such as anomaly detection and memory analyses. SoMo.ml complements the existing suite of modelled and satellite-based datasets given its distinct derivation, to support large-scale hydrological, meteorological, and ecological analyses.


Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 368
Author(s):  
Lisdelys González-Rodríguez ◽  
Amauri Pereira de Oliveira ◽  
Lien Rodríguez-López ◽  
Jorge Rosas ◽  
David Contreras ◽  
...  

Ultraviolet radiation is a highly energetic component of the solar spectrum that needs to be monitored because is harmful to life on Earth, especially in areas where the ozone layer has been depleted, like Chile. This work is the first to address the long-term (five-year) behaviour of ultraviolet erythemal radiation (UVER) in Santiago, Chile (33.5° S, 70.7° W, 500 m) using in situ measurements and empirical modelling. Observations indicate that to alert the people on the risks of UVER overexposure, it is necessary to use, in addition to the currently available UV index (UVI), three more erythema indices: standard erythemal doses (SEDs), minimum erythemal doses (MEDs), and sun exposure time (tery). The combination of UVI, SEDs, MEDs, and tery shows that in Santiago, individuals with skin types III and IV are exposed to harmfully high UVER doses for 46% of the time that UVI indicates is safe. Empirical models predicted hourly and daily values UVER in Santiago with great accuracy and can be applied to other Chilean urban areas with similar climate. This research inspires future advances in reconstructing large datasets to analyse the UVER in Central Chile, its trends, and its changes.


2021 ◽  
Vol 13 (1) ◽  
Author(s):  
La Li ◽  
Weijia Liu ◽  
Kai Jiang ◽  
Di Chen ◽  
Fengyu Qu ◽  
...  

AbstractZn-ion hybrid supercapacitors (SCs) are considered as promising energy storage owing to their high energy density compared to traditional SCs. How to realize the miniaturization, patterning, and flexibility of the Zn-ion SCs without affecting the electrochemical performances has special meanings for expanding their applications in wearable integrated electronics. Ti3C2Tx cathode with outstanding conductivity, unique lamellar structure and good mechanical flexibility has been demonstrated tremendous potential in the design of Zn-ion SCs, but achieving long cycling stability and high rate stability is still big challenges. Here, we proposed a facile laser writing approach to fabricate patterned Ti3C2Tx-based Zn-ion micro-supercapacitors (MSCs), followed by the in-situ anneal treatment of the assembled MSCs to improve the long-term stability, which exhibits 80% of the capacitance retention even after 50,000 charge/discharge cycles and superior rate stability. The influence of the cathode thickness on the electrochemical performance of the MSCs is also studied. When the thickness reaches 0.851 µm the maximum areal capacitance of 72.02 mF cm−2 at scan rate of 10 mV s−1, which is 1.77 times higher than that with a thickness of 0.329 µm (35.6 mF cm−2). Moreover, the fabricated Ti3C2Tx based Zn-ion MSCs have excellent flexibility, a digital timer can be driven by the single device even under bending state, a flexible LED displayer of “TiC” logo also can be easily lighted by the MSC arrays under twisting, crimping, and winding conditions, demonstrating the scalable fabrication and application of the fabricated MSCs in portable electronics.


Sign in / Sign up

Export Citation Format

Share Document