Chemical Vapor Deposition of Nickel Ferrite Using Ni C5H5 2 and Fe C5H4C4H9 C5H5

2010 ◽  
Vol 3 (1) ◽  
Author(s):  
Rachel Walker ◽  
M. Singh ◽  
Y. Yang ◽  
C.G. Takoudis
Keyword(s):  
Thin Films ◽  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Photoelectron Spectroscopy ◽  
Nickel Ferrite ◽  
Chemical Vapor ◽  
Silicon Substrates ◽  
Pressure Chemical ◽  
Oxygen Gas ◽  
The Individual

Chemical vapor deposition was used to deposit thin films of nickel oxide (NiO) and iron oxide (Fe2O3) on silicon substrates. Precursors chosen for this process were nickelocene,Ni(C5H5)2 and n-butylferrocene, Fe(C5H4C4H9)(C5H5), which were oxidized with oxygen gas in a low-pressure chemical vapor deposition system. Following the deposition of the individual metal oxides, the two precursors were used together with the goal of depositing a thin film of nickel ferrite (NiFe2O4). Both co-deposition and cyclic deposition were carried out, and the resulting thin films were analyzed using x-ray photoelectron spectroscopy. This study found that the resulting thin films did not contain NiFe2O4, but were composed of NiO and Fe2O3 in a different ratio. It is suggested that changing various parameters in this experiment can be used to vary this ratio.

A Novel Direct Liquid Injection Low Pressure Chemical Vapor Deposition System (DLI-LPCVD) for the Deposition of Thin Films

2017 ◽  
Vol 19 (8) ◽  
pp. 1700193 ◽  
Author(s):  
Mattias Vervaele ◽  
Bert De Roo ◽  
Jolien Debehets ◽  
Marilyne Sousa ◽  
Luman Zhang ◽  
...  
Keyword(s):  
Thin Films ◽  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Chemical Vapor ◽  
Low Pressure ◽  
Liquid Injection ◽  
Pressure Chemical ◽  
Direct Liquid Injection

Measurement of The Activation Energy in Phosphorous Doped Polycrystalline Diamond Thin Films Grown on Silicon Substrates by Hot Filament Chemical Vapor Deposition

1996 ◽  
Vol 423 ◽  
Author(s):  
S. Mirzakuchaki ◽  
H. Golestanian ◽  
E. J. Charlson ◽  
T. Stacy
Keyword(s):  
Thin Films ◽  
Activation Energy ◽  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Chemical Vapor ◽  
Polycrystalline Diamond ◽  
Silicon Substrates ◽  
Boron Doped Diamond ◽  
Diamond Thin Films ◽  
Hot Filament

AbstractAlthough many researchers have studied boron-doped diamond thin films in the past several years, there have been few reports on the effects of doping CVD-grown diamond films with phosphorous. For this work, polycrystalline diamond thin films were grown by hot filament chemical vapor deposition (HFCVD) on p-type silicon substrates. Phosphorous was introduced into the reaction chamber as an in situ dopant during the growth. The quality and orientation of the diamond thin films were monitored by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Current-voltage (I-V) data as a function of temperature for golddiamond film-silicon-aluminum structures were measured. The activation energy of the phosphorous dopants was calculated to be approximately 0.29 eV.

Ultra-high vacuum chemical vapor deposition and in situ characterization of titanium oxide thin films

1991 ◽  
Vol 6 (9) ◽  
pp. 1913-1918 ◽  
Author(s):  
Jiong-Ping Lu ◽  
Rishi Raj
Keyword(s):  
Thin Films ◽  
Chemical Vapor Deposition ◽  
Titanium Oxide ◽  
Vapor Deposition ◽  
Photoelectron Spectroscopy ◽  
High Vacuum ◽  
Chemical Vapor ◽  
Titanium Isopropoxide ◽  
Ultra High Vacuum

Chemical vapor deposition (CVD) of titanium oxide films has been performed for the first time under ultra-high vacuum (UHV) conditions. The films were deposited through the pyrolysis reaction of titanium isopropoxide, Ti(OPri)4, and in situ characterized by x-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES). A small amount of C incorporation was observed during the initial stages of deposition, through the interaction of precursor molecules with the bare Si substrate. Subsequent deposition produces pure and stoichiometric TiO2 films. Si–O bond formation was detected in the film-substrate interface. Deposition rate was found to increase with the substrate temperature. Ultra-high vacuum chemical vapor deposition (UHV-CVD) is especially useful to study the initial stages of the CVD processes, to prepare ultra-thin films, and to investigate the composition of deposited films without the interference from ambient impurities.

Sign in / Sign up

Export Citation Format

Share Document