Effect of biodegradable oil use on the mechanical properties of plastics used in the railway surface (Odziaływanie biodegradowalnego oleju na właściwości mechaniczne tworzyw sztucznych stosowanych w nawierzchni kolejowej)

2020 ◽  
Vol 128 ◽  
pp. 81-88 ◽  
Author(s):  
Paweł Kowalik ◽  
Mariusz Fabijański
Keyword(s):  
Mechanical Properties ◽  
Polymeric Materials ◽  
Polymer Materials ◽  
Strength Parameters ◽  
Properties Of Materials ◽  
Materials Used ◽  
Plastic Components ◽  
Biodegradable Lubricant ◽  
The Impact ◽  
Railway Turnout

The purpose of this study is to present the requirements, methodology, and results of research on the impact of biodegradable oil on plastic components used in the construction of a railway turnout. Briefly discussed are what railroad turnouts are, how they work, and what problems occur with substances used for their lubrication. They have an impact on the mechanical properties and durability of products made of polymeric materials. These types of materials absorb various kinds of chemicals, to a greater or lesser degree, and this affects their properties. For the tests, we used a universal lubrication oil with biodegradable properties, which is its most significant advantage. However, it may not cause deterioration of the turnout operation and change the properties of materials used for its construction. These types of oils require more frequent applications on cooperating components. We used the two most popular polymer materials. The first is high-density polyethylene (HDPE), used to make all kinds of rail spacers, dowels for fixing rails, sleeves, etc. The second, polyurethane (PUR) is most commonly used for rail pads of various shapes. The methodology and results of testing the impact of a lubricant (biodegradable oil) on the change of mechanical properties such as strength and hardness are presented. The tests were carried out at various temperatures; the time of exposure to oil was seven days; the results were referred to samples conditioned under standard conditions. The tests carried out on the impact of the biodegradable lubricant on polymeric materials (HDPE and PUR) showed little effect on the change of strength parameters of these materials. Celem niniejszego opracowania jest przedstawienie wymagań, metodyki oraz wyników badań oddziałania biodegradowalnego oleju na elementy z tworzyw sztucznych stosownych w budo-wie rozjazdu kolejowego. Krótko omówiono czym są rozjazdy kolejowe i jak działają oraz jakie występują problemy z substancjami używanymi do ich smarowania, które nie pozostają bez wpływu na właściwości mechaniczne i trwałość wyrobów z materiałów polimerowych. Materiały tego typu wchłaniają różnego rodzaju substancje chemiczne w większym lub mniejszym stopniu, a to ma wpływ na ich właściwości. Do badań został wykorzystany uniwersalny olej do smarowania o biodegradowalnych właściwościach, co jest jego największą zaletą. Jednak nie może on powodować pogorszenia pracy rozjazdu oraz zmieniać właściwości materiałów użytych do jego budowy. Tego typu oleje wymagają częstszego aplikowania na elementy współpracujące ze sobą. W pracy wykorzystano dwa najbardziej popularne materiały polimerowe. Pierw-szy to polietylen o dużej gęstości (HDPE), z którego wykonuje się wszelkiego rodzaju przekładki podszynowe, dyble do mocowania szyn, tuleje, itp. Drugi to poliuretan (PUR) stosowany najczęściej na przekładki podszynowe o różnym kształcie. Zaprezentowano metodykę i wyniki ba-dań oddziaływania środka smarnego (biodegradowalnego oleju) na zmianę właściwości mechanicznych takich jak wytrzymałość oraz twardość. Badania zostały przeprowadzone w różnych temperaturach, a czas ekspozycji na olej wynosił 7 dób, wyniki odniesiono do próbek klimatyzowanych w standardowych warunkach. Przeprowadzone badania oddziaływania biodegradowalnego środka smarnego na tworzywa polimerowe (HDPE i PUR), wykazały niewielki wpływ na zmianę parametrów wytrzymałościowych tych materiałów.

scholarly journals Testing of mechanical properties of materials used in FDM technology

Mechanik ◽  
2019 ◽  
Vol 92 (4) ◽  
pp. 285-287 ◽  
Author(s):  
Marcin Snopczyński ◽  
Jarosław Kotliński ◽  
Ireneusz Musiałek
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
3D Printing ◽  
Strength Parameters ◽  
Full Data ◽  
Printing Technology ◽  
3D Printing Technology ◽  
Mechanical Properties Of Materials ◽  
Properties Of Materials ◽  
Materials Used

With the development of 3D printing technology, there is a development in the use of new printing materials. In practice, it often happens that the constructor does not have full data about the material that he wants to use. The article presents the results of tests of tensile strength of samples printed using the FDM method. 3D printing using the FDM method is widespread, however, the properties of the materials used in this method are still not fully understood. The aim of the research was to obtain information on strength parameters that form the basis for further analyzes.

Possibilities of using biodegradable polymeric materials in the agricultural sector

2020 ◽  
Vol 67 (2) ◽  
pp. 115-120
Author(s):  
Raisa A. Alekhina ◽  
Victoriya E. Slavkina ◽  
Yuliya A. Lopatina
Keyword(s):  
Mechanical Properties ◽  
Biodegradable Polymers ◽  
Biodegradable Polymer ◽  
Agricultural Sector ◽  
Polymeric Materials ◽  
Polymer Materials ◽  
Limiting Factors ◽  
Research Purpose ◽  
Biodegradable Materials ◽  
Advantages And Disadvantages

The article presents options for recycling polymers. The use of biodegradable materials is promising. This is a special class of polymers that can decompose under aerobic or anaerobic conditions under the action of microorganisms or enzymes forming natural products such as carbon dioxide, nitrogen, water, biomass, and inorganic salts. (Research purpose) The research purpose is in reviewing biodegradable materials that can be used for the manufacture of products used in agriculture. (Materials and methods) The study are based on open information sources containing information about biodegradable materials. Research methods are collecting, studying and comparative analysis of information. (Results and discussion) The article presents the advantages and disadvantages of biodegradable materials, mechanical properties of the main groups of biodegradable polymers. The article provides a summary list of agricultural products that can be made from biodegradable polymer materials. It was found that products from the general group are widely used in agriculture. Authors have found that products from a special group can only be made from biodegradable polymers with a controlled decomposition period in the soil, their use contributes to increasing the productivity of crops. (Conclusions) It was found that biodegradable polymer materials, along with environmental safety, have mechanical properties that allow them producing products that do not carry significant loads during operation. We have shown that the creation of responsible products (machine parts) from biodegradable polymers requires an increase in their strength properties, which is achievable by creating composites based on them. It was found that the technological complexity of their manufacture and high cost are the limiting factors for the widespread use of biodegradable polymers at this stage.

scholarly journals Analysis of the Impact on the Mechanical Properties of Modification of Oligohydroxyethers in Organic Solvent Solution with Rubbers

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 519
Author(s):  
Vitalii Bezgin ◽  
Agata Dudek ◽  
Adam Gnatowski
Keyword(s):  
Mechanical Properties ◽  
Scientific Paper ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Molecular Weights ◽  
Wide Range ◽  
Strength Tests ◽  
Materials Used ◽  
Styrene Butadiene ◽  
The Impact

This paper proposes and presents the chemical modification of linear hydroxyethers (LHE) with different molecular weights (380, 640, and 1830 g/mol) with the addition of three types of rubbers (polysulfide rubber (PSR), polychloroprene rubber (PCR), and styrene-butadiene rubber (SBR)). The main purpose of choosing this type of modification and the materials used was the possibility to use it in industrial settings. The modification process was conducted for a very wide range of modifier additions (rubber) per 100 g LHE. The materials obtained in the study were subjected to strength tests in order to determine the effect of the modification on functional properties. Mechanical properties of the modified materials were improved after the application of the modifier (rubber) to polyhydroxyether (up to certain modifier content). The most favorable changes in the tested materials were registered in the modification of LHE-1830 with PSR. In the case of LHE-380 and LHE-640 modified in cyclohexanol (CH) and chloroform (CF) solutions, an increase in the values of the tested properties was also obtained, but to a lesser extent than for LHE-1830. The largest changes were registered for LHE-1830 with PSR in CH solution: from 12.1 to 15.3 MPa for compressive strength tests, from 0.8 to 1.5 MPa for tensile testing, from 0.8 to 14.7 MPa for shear strength, and from 1% to 6.5% for the maximum elongation. The analysis of the available literature showed that the modification proposed by the authors has not yet been presented in any previous scientific paper.

scholarly journals The impact of the health condition of oaks from the Krotoszyn Plateau on the mechanical properties of timber structures

2015 ◽  
Vol 57 (4) ◽  
pp. 224-232
Author(s):  
Jarosław Siwiński ◽  
Katarzyna Kubiak ◽  
Miłosz Tkaczyk ◽  
Anna Mazur ◽  
Ryszard Rekucki
Keyword(s):  
Mechanical Properties ◽  
Health Condition ◽  
Health State ◽  
Timber Structures ◽  
Strength Parameters ◽  
Modified Method ◽  
Strength Tests ◽  
Prior Selection ◽  
The Impact ◽  
Selection Of

Abstract The study was conducted to perform a comparative analysis of the mechanical properties of wood samples derived from oaks in the Krotoszyn Plateau, which depend on the health state of the trees. Strength parameters of oak wood were calculated for selected diseased and healthy trees (according to the Roloff classification). The study was conducted by a modified method described in the standard Polish Norm PN EN 408+ A1: 2012. For testing, prior selection of wood samples showed that more wood samples of diseased trees compared with those of healthy oaks did not fulfil the Polish standard requirements. According to the method used, the average results of strength tests of timber structures from healthy oaks exhibited higher strength parameters than those of the diseased trees.

Location Depending Textures of the Human Dental Enamel

2010 ◽  
Vol 160 ◽  
pp. 281-286 ◽  
Author(s):  
Lars Raue ◽  
Helmut Klein
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Dental Enamel ◽  
Polymeric Materials ◽  
Incisor Tooth ◽  
Worst Case ◽  
Dental Fillings ◽  
Anisotropic Mechanical Properties ◽  
Different Types ◽  
Materials Used

Dental enamel is the most highly mineralised and hardest biological tissue in human body [1]. Dental enamel is made of hydroxylapatite (HAP) - Ca5(PO4)3(OH), which is hexagonal (6/m). The lattice parameters are a = b = 0.9418 nm und c = 0.6875 nm [1]. Although HAP is a very hard mineral, it can be dissolved easily in a process which is known as enamel demineralization by lactic acid produced by bacteria. Also the direct consumption of acid (e.g. citric, lactic or phosphoric acid in soft drinks) can harm the dental enamel in a similar way. These processes can damage the dental enamel. It will be dissolved completely and a cavity occurs. The cavity must then be cleaned and filled. It exists a lot of dental fillings, like gold, amalgam, ceramics or polymeric materials. After filling other dangers can occur: The mechanical properties of the materials used to fill cavities can differ strongly from the ones of the dental enamel itself. In the worst case, the filling of a tooth can damage the enamel of the opposite tooth by chewing if the interaction of enamel and filling is not equivalent, so that the harder fillings can abrade the softer enamel of the healthy tooth at the opposite side. This could be avoided if the anisotropic mechanical properties of dental enamel would be known in detail, hence then another filling could be searched or fabricated as an equivalent opponent for the dental enamel with equal properties. To find such a material, one has to characterise the properties of dental enamel first in detail for the different types of teeth (incisor, canine, premolar and molar). This is here exemplary done for a human incisor tooth by texture analysis with the program MAUD from 2D synchrotron transmission images [2,3,4].

Assessment of the mechanical properties of different textile materials used for outer shell of bulletproof vest: woven fabrics for military applications

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
A.I.H. Fayed ◽  
Y.A. Abo El Amaim ◽  
Ossama Ramy ◽  
Doaa H. Elgohary
Keyword(s):  
Mechanical Properties ◽  
Woven Fabrics ◽  
Outer Shell ◽  
Common Mechanism ◽  
Content Type ◽  
Textile Materials ◽  
Steel Core ◽  
Materials Used ◽  
Bulletproof Vest ◽  
The Impact

Purpose This paper aims to investigate the performance of four different textile materials used as an outer shell of the bulletproof vest. Design/methodology/approach In this paper, four different textile materials were used, polyurethane treatment was applied as a surface coating for the woven samples. Mechanical properties were conducted for all samples; scanning electron microscope and X-ray energy disperse spectroscopy were executed to show the surface morphology of samples and the chemical composition of the coating material. Findings One-way ANOVA was used to statistically analyse the results, which proved that all variables were highly significantly affected by using different textile materials, despite the stiffness variable being not significantly affected by textile materials. An overall evaluation was done using radar chart, demonstrated that Cordura material accomplished the best functional performance, using two types of calibres 7.62 × 54 mild steel core and 7.62 × 54 armour piercing incendiary; the common mechanism was localized burn because of the incendiary effect of the projectile in addition to tearing mechanism starting from inside because of penetration effect of the steel core. Originality/value This work was addressed to analyse the impact of using four different materials on its performance as the outer shell of bulletproof vest to achieve the desired degree of protection.

Materials for Safety and Security

2020 ◽  
pp. 288-320
Author(s):  
Jozef Martinka ◽  
Janka Dibdiakova
Keyword(s):  
Hydrogen Cyanide ◽  
Ignition Temperature ◽  
Fire Risk ◽  
Combustion Products ◽  
Security Engineering ◽  
Insulating Materials ◽  
Properties Of Materials ◽  
Materials Used ◽  
Carbon Monoxide Yield ◽  
The Impact

This chapter deals with materials used in safety and security engineering. The most commonly used materials in this field include shielding materials, materials for protective suits, electrically insulating materials and materials for fire protection. The first part of the chapter describes the properties of materials used in the above applications. The second part of the chapter focuses on characteristics of materials that accurately describe their fire risk. The fire risk of a material is quantified by its resistance to ignition (determined generally by critical heat flux and ignition temperature) and by the impact of the fire on the environment. The impact of fire is usually determined by the heat release rate, toxicity of combustion products (primarily determined by carbon monoxide yield and for materials that contain nitrogen, also through the hydrogen cyanide yield) and the decrease of visibility in the area (depending on the geometry of the area and the smoke production rate).

scholarly journals Chemical Sand Consolidation: From Polymers to Nanoparticles

Polymers ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 1069 ◽  
Author(s):  
Fahd Saeed Alakbari ◽  
Mysara Eissa Mohyaldinn ◽  
Ali Samer Muhsan ◽  
Nurul Hasan ◽  
Tarek Ganat
Keyword(s):  
Compressive Strength ◽  
Negative Impact ◽  
Production Performance ◽  
Polymer Materials ◽  
Rock Permeability ◽  
Sand Control ◽  
Materials Used ◽  
The Impact ◽  
Chemical Material ◽  
Chemical Materials

The chemical sand consolidation methods involve pumping of chemical materials, like furan resin and silicate non-polymer materials into unconsolidated sandstone formations, in order to minimize sand production with the fluids produced from the hydrocarbon reservoirs. The injected chemical material, predominantly polymer, bonds sand grains together, lead to higher compressive strength of the rock. Hence, less amounts of sand particles are entrained in the produced fluids. However, the effect of this bonding may impose a negative impact on the formation productivity due to the reduction in rock permeability. Therefore, it is always essential to select a chemical material that can provide the highest possible compressive strength with minimum permeability reduction. This review article discusses the chemical materials used for sand consolidation and presents an in-depth evaluation between these materials to serve as a screening tool that can assist in the selection of chemical sand consolidation material, which in turn, helps optimize the sand control performance. The review paper also highlights the progressive improvement in chemical sand consolidation methods, from using different types of polymers to nanoparticles utilization, as well as track the impact of the improvement in sand consolidation efficiency and production performance. Based on this review, the nanoparticle-related martials are highly recommended to be applied as sand consolidation agents, due to their ability to generate acceptable rock strength with insignificant reduction in rock permeability.

Engineering Structure and Properties of Materials Used as a Matrix in Diamond Impregnated Tools / Kształtowanie Struktury I Własnosci Materiałów Stosowanych Jako Osnowa W Narzedziach Metaliczno-Diamentowych

2013 ◽  
Vol 58 (1) ◽  
pp. 5-8 ◽  
Author(s):  
J. Borowiecka-Jamrozek
Keyword(s):  
Mechanical Properties ◽  
Particle Size ◽  
Structure And Properties ◽  
Hot Press ◽  
Properties Of Materials ◽  
The Mean ◽  
Materials Used ◽  
Hot Press Process ◽  
Scanning Electron ◽  
And Tungsten

The paper presents mechanical properties of materials used as matrices in diamond impregnated tools. Several powder metallurgy materials were manufactured by the hot press process from various combinations of cobalt (Co SMS, Co Extrafine, Co 400mesh), carbonyl iron (Fe CN) and tungsten (WP30) powders. After consolidation the specimens were tested for density, hardness and tensile properties. The fracture surfaces and materials’ microstructure were observed using the Jeol JSM- 5400 scanning electron microscope and the Leica DM4000 light microscope. The main objective of the work was to determine the effects of the mean particle size of cobalt as well as additions of iron and tungsten on properties of the as-consolidated material.

Sign in / Sign up

Export Citation Format

Share Document