scholarly journals Fillers in Wood Adhesives

Fillers ◽  
2021 ◽  
Author(s):  
Abbas Hasan Faris
Keyword(s):  
Phenol Formaldehyde ◽  
Urea Formaldehyde ◽  
Curing Temperature ◽  
Polymer Materials ◽  
Curing Time ◽  
Wood Panel ◽  
Advantages And Disadvantages ◽  
Simple Addition ◽  
Synthetic Adhesives ◽  
Composite Production

The introduction of a second component to polymers has been presented; this component is often used to modify the characteristics of the products and to acquire new polymer materials with improved properties. Composite materials have a pivotal role in industries that are now considered the most progressive worldwide. At present, synthetic adhesives based on formaldehyde such as phenol-formaldehyde (PF), urea formaldehyde (UF), and melamine formaldehyde (MF) are predominantly used for wood composite production, and these adhesives are commonly used in the wood panel industry. These adhesives have some advantages and disadvantages. The use of PF adhesives is as important as UF adhesives in the wood panel industry. However, their application is still limited because of its brittleness, brown color, high curing temperature, long curing time, and toxicity due to liberation of phenol and formaldehyde. A variety of methods have been used to improve the performance of UF and PF adhesives as well as to expand their use. These methods are widely used in the industry; they include the simple addition of fillers. Moreover, the addition of fillers could reduce shrinkage and alleviate the stress on the glue line, which improves the hardness and durability.

Hybrid polymer composite materials. Part 2. Preparation technology

2020 ◽  
pp. 8-13
Keyword(s):  
Composite Materials ◽  
Impact Toughness ◽  
Polymer Composites ◽  
The Other ◽  
Polymer Materials ◽  
Hybrid Polymer ◽  
Preparation Technology ◽  
Advantages And Disadvantages ◽  
Hybrid Polymer Composite ◽  
The One

The main methods (pressing and winding) of the processing of hybrid polymer composites to obtain items were examined. Advantages and disadvantages of the methods were noted. Good combinations of different-module fibers (carbon, glass, boron, organic) in hybrid polymer materials are described, which allow one to prepare materials with high compression strength on the one hand, and to increase fracture energy of samples and impact toughness on the other hand.

Possibilities of using biodegradable polymeric materials in the agricultural sector

2020 ◽  
Vol 67 (2) ◽  
pp. 115-120
Author(s):  
Raisa A. Alekhina ◽  
Victoriya E. Slavkina ◽  
Yuliya A. Lopatina
Keyword(s):  
Mechanical Properties ◽  
Biodegradable Polymers ◽  
Biodegradable Polymer ◽  
Agricultural Sector ◽  
Polymeric Materials ◽  
Polymer Materials ◽  
Limiting Factors ◽  
Research Purpose ◽  
Biodegradable Materials ◽  
Advantages And Disadvantages

The article presents options for recycling polymers. The use of biodegradable materials is promising. This is a special class of polymers that can decompose under aerobic or anaerobic conditions under the action of microorganisms or enzymes forming natural products such as carbon dioxide, nitrogen, water, biomass, and inorganic salts. (Research purpose) The research purpose is in reviewing biodegradable materials that can be used for the manufacture of products used in agriculture. (Materials and methods) The study are based on open information sources containing information about biodegradable materials. Research methods are collecting, studying and comparative analysis of information. (Results and discussion) The article presents the advantages and disadvantages of biodegradable materials, mechanical properties of the main groups of biodegradable polymers. The article provides a summary list of agricultural products that can be made from biodegradable polymer materials. It was found that products from the general group are widely used in agriculture. Authors have found that products from a special group can only be made from biodegradable polymers with a controlled decomposition period in the soil, their use contributes to increasing the productivity of crops. (Conclusions) It was found that biodegradable polymer materials, along with environmental safety, have mechanical properties that allow them producing products that do not carry significant loads during operation. We have shown that the creation of responsible products (machine parts) from biodegradable polymers requires an increase in their strength properties, which is achievable by creating composites based on them. It was found that the technological complexity of their manufacture and high cost are the limiting factors for the widespread use of biodegradable polymers at this stage.

scholarly journals Synthesis of Geopolymer from Inorganic Construction Waste

2013 ◽  
Vol 30 ◽  
pp. 45-51 ◽  
Author(s):  
Arbind Pathak ◽  
Vinay Kumar Jha
Keyword(s):  
Compressive Strength ◽  
Coal Fly Ash ◽  
Chemical Society ◽  
Raw Material ◽  
Curing Temperature ◽  
Alkali Concentration ◽  
Curing Time ◽  
Mass Ratio ◽  
Construction Waste ◽  
Alumino Silicate

Recently, the demolition of old houses and the construction of new buildings in Kathmandu valley are in the peak which in turn generates a huge amount of construction waste. There are two major types of construction wastes which are burden for disposal namely cement-sand-waste (CSW) and the coal fly ash (CFA). These construction wastes are rich source of alumino-silicate and thus used as raw material for the synthesis of geopolymer in this study. Geopolymers have been synthesized from CSW and CFA using NaOH-KOH and Na2SiO3 as activators. Some parameters like alkali concentration, amount of Na2SiO3 and curing time have been varied in order to improve the quality of geopolymeric product. The geopolymerization process has been carried out using 3-8M KOH/NaOH solutions, Na2SiO3 to CFA and CSW mass ratio of 0.25-2.00 and curing time variation from 5-28 days. The curing temperature was fixed at 40ºC in all the cases. 6M NaOH and 7M KOH solutions were found appropriate alkali concentrations while the ratio of sodium silicate to CSW and CFA of 0.5 and 1.75 respectively were found suitable mass ratio for the process of geopolymer synthesis. The maximum compressive strength of only 7.3 MPa after 15 days curing time with CSW raw material was achieved while with CFA, the compressive strength was found to be 41.9 MPa with increasing the curing time up to 28 days.DOI: http://dx.doi.org/10.3126/jncs.v30i0.9334Journal of Nepal Chemical Society Vol. 30, 2012 Page:  45-51 Uploaded date: 12/16/2013    

Effect of Adhesive Thickness on the Impact Toughness of Butt-Joints

2011 ◽  
Vol 230-232 ◽  
pp. 1350-1354 ◽  
Author(s):  
Min You ◽  
Jing Rong Hu ◽  
Xiao Ling Zheng ◽  
Ai Ping He ◽  
Cun Jun Chen
Keyword(s):  
Impact Toughness ◽  
Adhesive Layer ◽  
Curing Temperature ◽  
Curing Time ◽  
Optimum Thickness ◽  
Adhesively Bonded ◽  
Butt Joints ◽  
Notched Specimen ◽  
Adhesive Thickness ◽  
The Impact

The effect of the adhesive thickness on the impact toughness of the adhesively bonded steel joint under impact loading is studied using the experimental method. The results obtained show that the impact toughness increases when the adhesive thickness increased then it decrease as the adhesive thickness increase. When the curing time is set as a constant, the higher the curing temperature is, the lower the impact toughness of the joint. The optimum thickness of the adhesive layer for the specimen of impact toughness test cured at 60 C for 1 h is 0.6 mm and it is 0.4 mm to 0.6 mm for the specimen cured 1 h at temperature of 90 C or higher than it. It is recommended using the notched specimen to decrease the testing deviation.

scholarly journals THE INFLUENCE OF SEVERAL TYPES OF RESINS ON THE DYNAMIC MECHANICAL PROPERTIES OF POLYMER MIXTURE BASED ON BUTYL RUBBER

2020 ◽  
Vol 3 (2) ◽  
pp. 36-45 ◽  
Author(s):  
O. Tarasova ◽  
Yu. Yurkin ◽  
A. Toroschin
Keyword(s):  
Phenol Formaldehyde ◽  
Dynamic Properties ◽  
Dynamic Mechanical Properties ◽  
Mechanical Analysis ◽  
Strength Properties ◽  
Butyl Rubber ◽  
Polymer Materials ◽  
Polymer Mixture ◽  
Damping Properties ◽  
Dynamic Mechanical

this work is devoted to the problem of developing vibration-damping polymer materials with high damping properties in a wide temperature range. The study of the effect of modifying additives on the strength, damping, adhesive and cohesive properties of a butyl rubber composite is the aim of this work. The task is to identify the actual temperature, frequency, dynamic and mechanical characteristics of a composite material based on butyl rubber depending on the type and concentration of resins. The key methods for studying this problem is the dynamic mechanical analysis method, aimed at obtaining information about changes in the dynamic properties of polymer materials (bond strength with metal when peeling samples of composites, determining the flow resistance of samples, determining the migration of plasticizer). Due to the established experimental dependences, it was found that the addition of resins (3% by weight) in the composition based on butyl rubber leads to an increase in the damping properties of composite materials, and an increase to (4.25% by weight) leads to their decrease. It was established that the obtained filled mixtures with a high damping peak and good adhesive and strength properties are mixtures with the addition of alkyl phenol-formaldehyde resins.

scholarly journals Synthesis and thermal properties of some phenolic resins

2019 ◽  
Vol 7 (1) ◽  
pp. 1-15
Author(s):  
Alshawi F M ◽  
Abdul Razzq K ◽  
Hanoosh W S
Keyword(s):  
Phenol Formaldehyde ◽  
Chemical Properties ◽  
Decomposition Temperature ◽  
Industrial Applications ◽  
Stability Study ◽  
Curing Temperature ◽  
Molar Ratio ◽  
Scanning Calorimetry ◽  
Phenolic Resins ◽  
Physical And Chemical

Introduction: Phenolic resins have been in use since the early twentieth century and are considered the first class of synthetic polymers to achieve commercial success, moreover phenolic resins continue to succeed and attract special interest in a large range of industrial applications such as adhesives, paints, and composites; because of their unique physical and chemical properties. Materials and Methods: Prepolymers resol resins (RR, RH, RP, and RC) were synthesized by the reaction of phenolic compounds (resorcinol, hydroquinone, phloroglucinol, and catechol) respectively, with formaldehyde at molar ratio phenol/ formaldehyde 1/1.5, using sodium hydroxide as a catalyst. These resins were characterized by FTIR. The curing reaction of these resins was evaluated using differential scanning calorimetry (DSC), while the thermal stability study was evaluated using thermogravimetric analysis (TGA). Results and Discussion:From the results showing that these prepolymers have different curing temperatures and curing energy, while the TGA study showed that the cured resins have decomposition temperature more than 300 ºC, and char residue at 650 ºC more than 60%. Conclusions: These resol resins have different gel times (8-55) min, and viscosities (435-350) mpa.s. The curing temperature of these resin obtained from DSC curves was (120, 129, 105 and 127 °C), while the thermal behavior of the cured resins obtained from TGA curves showed that these cured resin have two decomposition temperatures and the rate of decomposition in the order of RC < RR< .

scholarly journals The Reducing Approaches of Scattering Losses in Polymer Planar Optical Waveguides

2021 ◽  
Vol 7 (1) ◽  
pp. 31-40
Author(s):  
T. Radzievskaya ◽  
N. Ivanov ◽  
S. Tarasov
Keyword(s):  
Data Transmission ◽  
Optical Waveguides ◽  
Soft Lithography ◽  
High Speed ◽  
Polymeric Materials ◽  
Polymer Materials ◽  
Advantages And Disadvantages ◽  
High Speed Data ◽  
Scattering Losses ◽  
Planar Optical Waveguides

The article presents the development prospects of planar optical waveguides for high-speed data transmission systems optoelectronic buses by polymer materials. The advantages and disadvantages of using non-specialized polymeric materials for general use are revealed. The polymer planar optical waveguides fabrication technologies are proposed. The main losses types in planar optical waveguides, the reasons for their occurrence, as well as approaches to their reduction are determined. Using the example of PDMS polymer and soft lithography technology, the technological process critical stages of polymer planar optical waveguides production are noted, which contribute to an scattering losses increase. For each stage, algorithms are proposed to prevent an scattering losses increase. These algorithms were implemented in practice in the manufacture of layouts of polymer planar optical waveguides of the optical-electronic data transmission bus.

scholarly journals Lignosulphonates as an Alternative to Non-Renewable Binders in Wood-Based Materials

Polymers ◽  
2021 ◽  
Vol 13 (23) ◽  
pp. 4196
Author(s):  
Sofia Gonçalves ◽  
João Ferra ◽  
Nádia Paiva ◽  
Jorge Martins ◽  
Luísa H. Carvalho ◽  
...  
Keyword(s):  
Phenolic Compounds ◽  
Aromatic Ring ◽  
Phenol Formaldehyde ◽  
Urea Formaldehyde ◽  
Value Added ◽  
Wood Adhesives ◽  
Renewable Source ◽  
Pressing Time ◽  
Value Added Products ◽  
Total Market

Lignin is a widely abundant renewable source of phenolic compounds. Despite the growing interest on using it as a substitute for its petroleum-based counterparts, only 1 to 2% of the global lignin production is used for obtaining value-added products. Lignosulphonates (LS), derived from the sulphite pulping process, account for 90% of the total market of commercial lignin. The most successful industrial attempts to use lignin for wood adhesives are based on using this polymer as a partial substitute in phenol-formaldehyde or urea-formaldehyde resins. Alternatively, formaldehyde-free adhesives with lignin and lignosulphonates have also been developed with promising results. However, the low number of reactive sites available in lignin’s aromatic ring and high polydispersity have hindered its application in resin synthesis. Currently, finding suitable crosslinkers for LS and decreasing the long pressing time associated with lignin adhesives remains a challenge. Thus, several methods have been proposed to improve the reactivity of lignin molecules. In this paper, techniques to extract, characterize, as well as improve the reactivity of LS are addressed. The most recent advances in the application of LS in wood adhesives, with and without combination with formaldehyde, are also reviewed.

Sign in / Sign up

Export Citation Format

Share Document