scholarly journals Assessment of Industrial Symbiosis Implementation Opportunities: A Study in a Selected Industrial Zone, Sri Lanka

2021 ◽  
pp. 38-47
Author(s):  
E. A. C. P. Karunarathne ◽  
W. A. P. Madhushan
Keyword(s):  
Point Of View ◽  
Third Party ◽  
Sri Lankan ◽  
Industrial Symbiosis ◽  
Industrial Zone ◽  
Cost Of Treatment ◽  
Secondary Usage ◽  
Application Potential ◽  
Solid Liquid ◽  
Direct Discharge

Most Sri Lankan Industries discharge or dispose of many waste materials in large quantities in solid, liquid, and gaseous forms. Due to the high cost of treatment, many industries dispose of wastes either to dumpsites or lowlands through third-party contractors. The haphazard disposal of untreated waste is growing into a significant problem in the country. As a result, this study was conducted to identify the application options to treat or reuse the valuable waste generated by some selected industries by implementing the industrial symbiosis process in an industrial zone. Personal interviews and questionnaires were used as the methodological tools of the study to collect firm-related waste. Material properties and feasibility facts were mainly considered concerning industrial symbiosis application potential with respect to the waste receivers' and doners' perspectives. Through the study, potential secondary usage of waste was identified, avoiding direct discharge into the environment. The result from the evaluation indicates some support to the theories that industrial symbiosis can have benefits both from an economic and environmental point of view.

scholarly journals Creation of Technical Conditions for Use or Infringement – The Meanders of the Warehouse Keeper’s Liability in Light of CJEU Judgment C-567/18 Coty Germany

2021 ◽  
Vol 52 (3) ◽  
pp. 265-282
Author(s):  
Krystyna Szczepanowska-Kozłowska
Keyword(s):  
Property Rights ◽  
Point Of View ◽  
Literal Meaning ◽  
Property Right ◽  
Third Party ◽  
Property Law ◽  
Industrial Property ◽  
The Absolute ◽  
The Law ◽  
Trademark Use

AbstractOne form of industrial property right infringement is stocking for the purpose of offering or marketing. This form of infringement appears both in EU legal acts on trademarks or designs, as well as in national regulations, including those concerning patents. What is specific to stocking when compared to other activities comprising the stipulated exclusivity of the holder of industrial property rights is the fact that the literal meaning of “stocking” does not explain whether the infringing party or the warehouse keeper is the entity that places the goods in storage. The structure of industrial property rights as absolute rights would theoretically permit the view that the law is violated by both the entity that accepts the goods for storage and the entity that places such goods in storage. To determine if there is an infringement, it must be established what the goods being stocked are further intended for. It is not without significance that the finding of an infringement of industrial property rights does not depend on fault or awareness. From the point of view of the industrial property law regime, it is difficult to find arguments against this understanding of infringement by stocking. Since the offeror of goods infringing industrial property rights may be held liable even if the goods have not yet been manufactured, it is conceivable that the entity accepting such goods for stocking is also liable. This interpretation of the concept of stocking would certainly correspond to the absolute nature of liability for infringement.In a recent judgment the CJEU confirmed that the warehouse keeper who, on behalf of a third party, stores goods which infringe trademark rights only creates the technical conditions for trademark use by this third party provided that the warehouse keeper is not aware of that infringement. The CJEU also confirmed that only the person who decides about the purpose of storing the goods can be treated as an infringer. However, the CJEU did not respond to the question regarding whether the warehouse keeper could be treated as an infringer if it pursues the aims of storing the goods at the request of the entity that put the goods into storage.

scholarly journals Reinsurance of Third Party Motor Insurance and Motor Insurance in Finland

1962 ◽  
Vol 2 (1) ◽  
pp. 174-176 ◽  
Author(s):  
Teivo Pentikäinen
Keyword(s):  
Point Of View ◽  
Third Party ◽  
Lump Sum ◽  
Legal Limits ◽  
Physical Injuries ◽  
Insurance Cover ◽  
Motor Insurance ◽  
Full Compensation ◽  
The Individual ◽  
Risk Limits

The need and extent of reinsurance of third party motor insurance depends fundamentally on the risk limits prescribed in the legislation of the country in question (and on the other hand the legal limits of the compulsory insurance may have been fixed with regard to the reasonable possibilities of the insurers getting reinsurance). There are two kinds of risk limits which are applied in different countries: total limits and individual limits. The former defines the maximum joint indemnity for an accident, paid to all claiments together, and the latter defines the maximum indemnity paid to each claiment separately. From the social point of view limits of this sort are not expedient, especially in regard to physical injuries. Owing to this total limit the indemnity for a single claiment can depend on the number of other claiments, which is quite inadequate from the point of view of the actual need to get insurance cover for injuries. The individual lump sum limit allows full compensation for slight injuries but can cut down the compensation for serious ones, which is an irrational method of settling an indemnity system. Owing to these risk limits motor car drivers may also be held responsible for the extra claims personally on the basis of civil (or criminal) law, which compels them to take an extra third party liability insurance (which often also has risk limits).

scholarly journals Unstable Hemostasis and Specific Postoperative Complications (Literature Review)

2020 ◽  
Vol 5 (4) ◽  
pp. 98-102
Author(s):  
D. V. Lebedeva ◽  
E. A. Ilyicheva
Keyword(s):  
Postoperative Complications ◽  
Rapid Development ◽  
Point Of View ◽  
The Body ◽  
Cost Of Treatment ◽  
Duration Of Hospital Stay ◽  
Technical Errors ◽  
Perioperative Bleeding ◽  
The Cost

Perioperative bleeding occupies a leading place among all surgical complications and, despite the rapid development of surgery, remains relevant to this day. In addition to an increase in mortality, bleeding can cause the development of other postoperative complications, which lead to disability of patients and to a decrease in the quality of life in all age groups. Most perioperative bleeding are caused by technical errors. This article reviews the problem of perioperative bleeding from the point of view of impaired coagulation capabilities of the body. The main etiopathogenetic features of hemostasis during the development of this complication are considered. The analysis of postoperative complications, which were directly or indirectly caused by bleeding during or after surgery, is presented. The prevalence of these complications in various areas of surgery has been demonstrated. More detailed study of the hemostasis system and the identification of predictors of hemostasis difficulties before the surgery may cause an improvement in the results of surgical treatment and reduce the number of postoperative complications and the duration of hospital stay. Accordingly, this will lead to a decrease in the cost of treatment and an increase in patient satisfaction with the medical care. In connection with the above, there is a great interest among surgeons and anesthesiologists in preventing the development of perioperative bleeding.

scholarly journals Tax Law: Third Party As Payer of Income from Dependent Activity

2013 ◽  
Vol 13 (1) ◽  
pp. 147-161
Author(s):  
Jana Tepperová ◽  
Lucie Rytířová
Keyword(s):  
Income Tax ◽  
Personal Income ◽  
Point Of View ◽  
Third Party ◽  
Personal Income Tax ◽  
The Czech Republic ◽  
International Regulations ◽  
Set Up ◽  
Specific Tax ◽  
Collection Point

Abstract Employment related income paid by a third party (non-employer) has its specific tax treatment. In the Czech Republic, a different approach applies for calculation of personal income tax and obligatory insurance contributions from this income. With the preparation of the Single Collection Point (unifying the collection of personal income tax and obligatory insurance contributions), the question arises whether it is possible to set up unified treatment of this income for all obligatory payments. We provide detailed analyses of this topic from the point of view of the Czech legislation and comparison with selected countries. Further we follow with the discussion of problematic issues in unified treatment for all obligatory payments from this income; such as discrimination and complicated administration. We conclude that even if the national legislation for all obligatory payments from this income would not diff er, there will still be different treatment due to specific international regulations.

Analysis of Hydrodynamics and Mass Transfer of Gas-Liquid and Liquid-Liquid Taylor Flows in Microchannels

2019 ◽  
pp. 1-49
Author(s):  
Rufat Abiev
Keyword(s):  
Mass Transfer ◽  
Point Of View ◽  
Process Conditions ◽  
Two Phase ◽  
Physical Point ◽  
Micro Channels ◽  
Liquid Systems ◽  
Simplifying Assumptions ◽  
Liquid Flows ◽  
Solid Liquid

Analysis of hydrodynamics and mass transfer Taylor flows in micro channels of both gas-liquid and liquid-liquid systems on the basis of classical theoretical approach with some simplifying assumptions was performed. Results of theoretical analysis for description of hydrodynamic parameters and mass transfer characteristics were confirmed by comparison with the author's own and available in literature experimental data. It was shown that the main parameters of two-phase Taylor flows could be quite precisely described theoretically: mean bubble/droplet velocity, liquid film thickness, real gas holdup (which is always smaller than so-called dynamic holdup), pressure drop. Peculiarities of liquid-liquid flows compared to gas-liquid Taylor flows in capillaries are discussed. Wettability effect on hydrodynamics was examined. Tools of mass transfer intensification of gas-liquid and liquid-liquid Taylor flow in micro channels are analyzed. Three-layer model for heat and mass transfer has been proposed and implemented for the case of solid-liquid mass transfer for gas-liquid Taylor flows; optimal process conditions for this process are found theoretically and discussed from physical point of view.

PREPARATION AND CHARACTERIZATION OF SURFACE-FUNCTIONALIZATION OF SILICA-COATED MAGNETITE NANOPARTICLES FOR DRUG DELIVERY

NANO ◽  
2014 ◽  
Vol 09 (04) ◽  
pp. 1450042 ◽  
Author(s):  
CONG-WANG ZHANG ◽  
CHANG-CHUN ZENG ◽  
YING XU
Keyword(s):  
Drug Delivery ◽  
Shell Structure ◽  
Drug Carrier ◽  
Point Of View ◽  
Core Shell ◽  
Shell Nanoparticles ◽  
The Core ◽  
Application Potential ◽  
Core Shell Structure ◽  
Core Shell Nanoparticles

Fe 3 O 4– SiO 2 core–shell structure nanoparticles containing magnetic properties were investigated for their potential use in drug delivery. The Fe 3 O 4– SiO 2 core–shell structure nanoparticles were successfully synthesized by a simple and convenient way. The Fe 3 O 4– SiO 2 nanoparticles showed superparamagnetic behavior, indicating a great application potential in separation technologies. From the application point of view, the prepared nanoparticles were found to act as an efficient drug carrier. Specifically, the surface of the core–shell nanoparticles was modified with amino groups by use of silane coupling agent 3-aminopropyltriethoxysilane (APTS). Doxorubicin (DOX) was successfully grafted to the surface of the core–shell nanoparticles after the decoration with the carboxyl acid groups on the surface of amino-modified core–shell structure nanoparticles. Moreover, the nanocomposite showed a good drug delivery performance in the DOX-loading efficiency and drug release experiments, confirming that the materials had a great application potential in drug delivery. It is envisioned that the prepared materials are the ideal agent for application in medical diagnosis and therapy.

scholarly journals THE EFFECTS OF DISSOLUTION OF THE SOLID NICKEL IN LIQUID ALUMINUM

2016 ◽  
Vol 22 (4) ◽  
pp. 222
Author(s):  
Blagoj Rizov ◽  
Dafinka Stoevska Gogovska ◽  
Ruzica Manojlovic
Keyword(s):  
Thermal Effects ◽  
Liquid Aluminum ◽  
Point Of View ◽  
Experimental Conditions ◽  
Numerous Investigation ◽  
Experimental Procedure ◽  
Heat Effects ◽  
Master Alloys ◽  
Solid Nickel ◽  
Solid Liquid

<p class="Adressess">The preparation of a large number of materials trough the propagating exothermic reactions has been the objective of numerous investigation. Self-propagating reactions are typically associated with high temperatures and extremely steep thermal gradients and thus offer the opportunity to investigate the formation of intermediate and metastable phases. Such reactions are also of interest from a practical point of view since, as has been described in numerous literature accounts, they provide the opportunity to prepare materials with unique properties.</p><p class="Adressess">In this study the thermal effects of dissolution on the solid nickel in liquid aluminum and formation intermetallic phases was studied by simple experimental procedure. The thermal effects generated by exothermic solid-liquid metal interaction was judged by the rise of temperature in the system. Depending on experimental conditions, two different regimes of behavior were found: solid-liquid interaction leading to the considerable rise of the temperature in the system, and characterized by continuos decrease of the temperature in the system with time. The results of the experiments on the heat effects during the interaction of solid nickel with different particle size and liquid aluminum, with and without external mixing, are presented. It has been shown that, depending on experimental conditions, the evolved heat may influence the structure of a zone near to the solid-liquid interface. The experimental procedure correlates with the practical conditions of semi-industrial production of aluminum-nickel master alloys with relatively high percentage of nickel.</p>

scholarly journals Legal Regalements of E-Signature

2020 ◽  
Vol 25 (39) ◽  
pp. 98-127
Author(s):  
Tea Edisherashvili
Keyword(s):  
International Organizations ◽  
Legal Status ◽  
Point Of View ◽  
Third Party ◽  
The Internet ◽  
Safe Environment ◽  
The Third ◽  
Gradual Disappearance ◽  
Written Form ◽  
Technical Safety

AbstractThe development of informative technologies, including that of the Internet, has significantly changed the human’s life. The largest portion of civil turnover has been encompassed by e-commerce. This latter is being executed through e-contracts. The e-contract from the doctrinal point of view is considered as dealt and the existence of e-signature is an essential component of its authentication, which in its turn determines the issue of existence-absence of written form. The present article is related to the issues of legal status, technical safety and reliable environment of application of e-signature. The necessity of applying the legal instrument was conditioned by the necessity of gradual disappearance of paper-based operations’ execution practice. The application of e-document turnover is justified only in case if the authentication of the document and the signature placed on it has been followed and all this has been acknowledged by the third party. Despite the various models of e-signature, for all of them, it is important to have a reliable and safe environment, for guaranteeing the safety and signer’s identity. The article shows the issues related to legal governing of e-signature according to the legislation of Georgia, also Russian Federation, Continental Europe, Common Court member states, as well as directives and guidelines developed by international organizations.

scholarly journals DISCOURSE ON TELEVISION TALK SHOWS: GENRE OR FORMAT

2020 ◽  
Vol 16 (3) ◽  
pp. 124-133
Author(s):  
Tatyana Parsadanova
Keyword(s):  
Art History ◽  
Emotional State ◽  
Point Of View ◽  
Third Party ◽  
Talk Shows ◽  
Theoretical Development ◽  
One Dimensional ◽  
Television Production ◽  
Production Company ◽  
Broadcasting Schedule

Different approaches to the analysis of television production - one-dimensional and multi-dimensional, exist. All television products are classified by purpose, format, way, and frequency of display, audience, genre, country of production, by who it was produced - the channel itself, or a third-party production company, whether this project is licensed or original. In recent years, Russian TV channels have been broadcasting a large number of conversational TV programs - talk shows. In the programmed broadcasting schedule of some TV channels, they take about 9 hours of airtime, and this is without repetitions. These projects can also be classified in several directions. A discussion between people on a particular topic, which includes elements of such genres as interviews and conversation, is the main essence of a talk show. The debate is a recognized genre of analytical journalism, but at the same time, many talk shows are also defined as a genre. The theory of genre is one of the most significant theoretical development areas in art history, but no single, generally accepted definition exists. Some people believe that the tasks of modern talk shows are well known. This is primarily a desire to make a comprehensively exciting television program with elements of intrigue from a primitive topic, to attract attention and a desire to form a specific attitude to the problem under discussion. The author has a different opinion on some points. Indeed, any show is based on attracting attention. For such projects, the presence of viewers in the studio became a kind of confirmation of the audience's interest in the topic and the opportunity to include them in the discussion, to achieve social commonality. However, from the author's point of view, greater attention must be paid to the idea what the producer wants to convey to the audience and how he wants to see it in the future, to the content - with what information and in what genre to do the project, and to the understanding in what form/format to make the content. At the same time, it is essential to remember that according to the theory of V.Behterev, the process of making people have a specific emotional state occurs faster and more efficiently than an attempt to convince them with the help of logical reasoning.

Sign in / Sign up

Export Citation Format

Share Document