Специфика статистики упругих и деформационно-прочностных свойств высокопрочных волокон полипропилена

Regularities of statistical distributions of a complex of mechanical properties, including the module of elasticity (E), strength () and strain at break (b), high-strength industrial oriented polypropylene (PP) fibers have been analyzed using the Weibull and Gauss models based on large a wide array of measurements (50 identical samples in each series). The values of the statistical Weibull modulus (m) - a parameter characterizing the scatter of the measured values of the data arrays of E,  and b – have been estimated for the PP samples of two types: single fibers (monofilaments) and multifilament fibers consisting from several hundred single fibers. For the PP multifilament fibers, a more correct description of the distributions of E,  and b has been received both in the framework of the normal distribution (Gaussian distribution) and in the framework of the Weibull distribution in comparison with the description of such distributions for the PP monofilaments. The influence of the polymer chain conformation on the regularities of the statistical distributions of E,  and b for the high-strength oriented polymeric materials with different chemical chain structures and the correctness of their descriptions in the framework of the Gauss and Weibull models have been analyzed. For this purpose, the values of m calculated in this work for PP with a helical chain conformation have been compared with the values of m determined by us earlier for ultra-high molecular weight polyethylene and polyamide-6 with the chain conformations in the form of an in-plane trans-zigzag.

Surface modification of recycled coir fibers with hybrid coating and its effect on the properties of ABS composites

In this work, a hybrid coating (TSMA) was produced using tetraethyl orthosilicate (TEOS)/KH550/Styrene maleic anhydride copolymer (SMA) as raw materials. The coating was afterwards applied to modify recycled coir (r-coir) fibers via dip-coating. R-coir fibers reinforced ABS composites were then prepared and the reinforcing effect of fibers on the composite structure was investigated, as well. The r-coir fibers coated with TSMA were hydrolyzed in air for 3 days. The SiO2 particles produced by sol-gel reaction of TEOS were used to connect KH550 and SMA to the surface of the fibers and form an organic-inorganic ‘armor’ structure. The successful surface modification of the r-coir fibers was proved via FTIR spectroscopic study and the improvement of their decomposition temperature was evidenced by TGA. Furthermore, the homogeneous dispersion of TSMA on the surface of r-coir fibers was observed via SEM. In addition, the tensile strength of single fibers was found to increase by 36.1%. According to the results, TSMA can be successfully homogenized on the fiber surface, enabling one to repair the damaged areas and improve the tensile strength of single fibers. Besides, good compatibility between r-coir fibers and ABS was revealed by contact angle measurements. Furthermore, the bending strength and elastic modulus of TSMA-modified r-coir fibers/ABS composites were improved by 6% and 27%, respectively. Therefore, the method of plant fiber modification proposed in present work provides a reliable way for effective reuse of r-coir fibers.

Tensile Characterizations of Oil Palm Empty Fruit Bunch (OPEFB) Fibres Reinforced Composites in Various Epoxy/Fibre Fractions

Oil palm empty fruit bunch (OPEFB) single fibers and reinforced composites were comprehensively characterized through tensile tests to assess their performance as potential reinforcing materials in polymer composites. The performances of OPEFB single fibers and reinforced composites with untreated and treated fibers conditions were compared. The fibers were variously treated with 3% sodium hydroxide, 2% silane, 3% sodium hydroxide mixed with 2% silane, and 3% sodium hydroxide prior to 2% silane for 2 hours soaking time. The highest toughness of the single fibers test was then selected to proceed with composites fabrication. The OPEFB composites were fabricated in 90:10, 80:20, 70:30, and 60:40 epoxy-fibre fractions. The result shows that the selected treated fiber composite exhibits better performance. The selected treated fiber composite increased the highest ultimate tensile strength by 145.3% for the 90:10 fraction. The highest Young’s Modulus was increased by about 166.7% for 70:30 fraction. Next, the highest toughness was increased by 389.5% for the 30:70 fraction. The treated fibers provided a better interlocking mechanism between the matrix and fibers in reinforced composites, thus improving their interfacial bonding.

Tribologische Charakterisierung von Polymerfasern unter Trockenreibung, Mischreibung und Hydrodynamik mittels einer optimierten Pin-on-Disc-Prüfmethode

Based on the conventional pin-on-disc test method, a tribology test rig was adapted and optimized regarding its ability to characterize polymer fibers. The method is explained and first applications in the field of tribological characterization of single fibers are presented. The test sequence to investigate the polymer fibers (diameters of only a few 100 µm) is generated in such a way that data can be recorded continuously as a function of time in the wear range from a few 10 µm to several 100 µm even during the first few minutes. The test mode starts by applying line load and dynamically progresses to area load by changing the contact area during the measurement. It is shown that single fibers can be characterized with respect to their friction and wear properties in different tribological systems. The dependence of the wear rates of fiber material, surface roughness of the counter bodies and lubrication rates is presented.

EXPERIMENTAL EVALUATION OF COMPRESSIVE STRENGTH OF PAN-BASED CARBON MONOFILAMENT BY POISSON’S DEFORMATION IN CRUCIFORM SPECIMEN

Carbon fiber has relatively high anisotropy in tensile and compressive strength. Since, the diameter of carbon fiber is 5~10[μm], it is difficult to directly evaluate the compressive strength of monofilament. In this study, the compressive strength of carbon single fiber was evaluated using Poisson's deformation of Cruciform specimen. Using the Cruciform test method, the compressive strengths of monofilaments of PAN-based carbon fibers, T300B and T700SC, were experimentally and analytically evaluated. As a result, the compressive strengths of carbon single fibers was 5.12 [GPa] for T300/PA6 and 5.54 [GPa] for T700/PA6 in this study.

Origami hand for soft robotics driven by thermally controlled polymeric fiber actuators

Active fibers can serve as artificial muscles in robotics or components of smart textiles. Here, we present an origami hand robot, where single fibers control the reversible movement of the fingers. A recovery/contracting force of 0.2 N with a work capacity of 0.175 kJ kg−1 was observed in crosslinked poly[ethylene-co-(vinyl acetate)] (cPEVA) fibers, which could enable the bending movement of the fingers by contraction upon heating. The reversible opening of the fingers was attributed to a combination of elastic recovery force of the origami structure and crystallization-induced elongation of the fibers upon cooling. Graphic abstract

Dynamic Mechanical Properties of Several High-Performance Single Fibers

High-performance fiber-reinforced composites (FRCs) are widely used in bulletproof structures, in which the mechanical properties of the single fibers play a crucial role in ballistic resistance. In this paper, the quasi-static and dynamic mechanical properties of three commonly used fibers, single aramid III, polyimide (PI), and poly-p-phenylenebenzobisoxazole (PBO) fibers are measured by a small-scale tensile testing machine and mini-split Hopkinson tension bar (mini-SHTB), respectively. The results show that the PBO fiber is superior to the other two fibers in terms of strength and elongation. Both the PBO and aramid III fibers exhibit an obvious strain-rate strengthening effect, while the tensile strength of the PI fiber increases initially, then decreases with the increase in strain rate. In addition, the PBO and aramid III fibers show ductile-to-brittle transition with increasing strain rate, and the PI fiber possesses plasticity in the employed strain rate range. Under a high strain rate, a noticeable radial splitting and fibrillation is observed for the PBO fiber, which can explain the strain-rate strengthening effect. Moreover, the large dispersion of the strength at the same strain rate is observed for all the single fibers, and it increases with increasing strain rate, which can be ascribed to the defects in the fibers. Considering the effect of strain rate, only the PBO fiber follows the Weibull distribution, suggesting that the hypothesis of Weibull distribution for single fibers needs to be revisited.