Phenotypic and genetic associations between feeding behavior and carcass merit in crossbred growing cattle

In growing cattle, the phenotypic and genetic relationships between feeding behavior and both live animal ultrasound measures and subsequent carcass merit are generally poorly characterized. The objective of the current study was to quantify the phenotypic and genetic associations between a plethora of feeding behavior traits with both pre-slaughter ultrasound traits and post-slaughter carcass credentials in crossbred Bos taurus cattle. Carcass data were available on 3,146 young bulls, steers, and heifers, of which 2,795 and 2,445 also had records for pre-slaughter ultrasound muscle depth and intramuscular fat percentage, respectively; a total of 1,548 steers and heifers had information on all of the feeding behavior, ultrasound, and carcass traits. Young bulls were fed concentrates, while steers and heifers were fed a total mixed ration. Feeding behavior traits were defined based on individual feed events or meal events (i.e., individual feed events grouped into meals). Animal linear mixed models were used to estimate (co)variance components. Phenotypic correlations between feeding behavior and both ultrasound and carcass traits were generally weak and not different from zero, although there were phenotypic correlations of 0.40, 0.26, and 0.37 between carcass weight and feeding rate, energy intake per feed event, and energy intake per meal, respectively. Genetically, cattle that had heavier carcass weights, better carcass conformation, or a higher dressing percentage fed for a shorter time per day (genetic correlations [±SE] of −0.46 ± 0.12, −0.39 ± 0.11, and −0.50 ± 0.10, respectively). Genetic correlations of 0.43 ± 0.12 and 0.68 ± 0.13 were estimated between dressing difference (i.e., differential between live weight pre-slaughter and carcass weight) and energy intake per feed event and energy intake per meal, respectively. Neither intramuscular fat percentage measured on live animals nor carcass fat score (i.e., a measure of subcutaneous fat cover of the carcass) was genetically associated with any of the feeding behavior traits. The genetic associations between some feeding behavior traits and both ultrasound and carcass traits herein suggested that indirect responses in the feeding behavior of growing cattle from selection for improved carcass merit would be expected. Such changes in feeding behavior patterns in cattle may be reduced by measuring and including feeding behavior in a multiple-trait selection index alongside carcass traits.

Identification of Genomic Regions for Carcass Quality Traits within the American Simmental Association Carcass Merit Program

USDA quality and yield grade are primary driving forces for carcass value in the United States. Carcass improvements can be achieved by making selection decisions based on the results of genetic evaluations in the form of expected progeny differences (EPD), real-time ultrasound imaging, and physical evaluation of candidate breeding animals. In an effort to advance their ability to accurately predict the breeding value of potential sires for carcass traits, the American Simmental Association launched the Carcass Merit Program as a means to collect progeny sire group carcass information. All records were extracted from the American Simmental Association database. Progeny data were organized by sire family and progeny performance phenotypes were constructed. Sire genotypes were filtered, and a multi-locus mixed linear model was used to perform an association analysis on the genotype data, while correcting for cryptic relatedness and pedigree structure. Three chromosomes were found to have genome-wide significance and this conservative approach identified putative QTL in those regions. Three hundred ninety-three novel regions were identified across all traits, as well as 290 novel positional candidate genes. Correlations between carcass characteristics and maternal traits were less unfavorable than those previously reported.

The effect of life history events on carcass merit and price of cull dairy cows

Cull dairy cows contribute almost 10% of national beef production in the United States. However, different factors throughout the life of dairy cows affect their weight and overall body condition as well as carcass traits, and consequently affect their market price. Therefore, the objectives of this study were: 1) to assess relationships between price ratio and carcass merit of cull dairy cows sold through several sites of an auction market, and 2) to investigate the effect of animal life history events and live weight on sale barn price (BP) and price ratio (as a measure of relative price), as an indicator of carcass merit. Data from four dairy operations included 3,602 cull dairy cow records during the period of 2015 to 2019. Life history events data were collected from each dairy operation through Dairy Comp software; live weight and price were obtained periodically from the auction market, and the carcass data were provided by a local packing plant. Cow price in dollars per unit of live weight ($/cwt) and price ratio were the two outcome variables used in the analyses. Price ratio was created aiming to remove seasonality effects from BP (BP divided by the national average price for its respective month and year of sale). The association between price ratio and carcass merit traits was investigated using canonical correlation analysis (CCA), and the effect of life history events on both BP and price ratio was inferred using a multiple linear regression technique. More than 70% of the cows were culled in the first three lactations, with an average live weight of 701.5kg, carcass weight of 325kg, and dressing percentage of 46.3%. On average, cull cows were sold at $57.0/cwt during the period considered. The canonical correlation between price ratio and carcass merit traits was 0.76, indicating that price ratio reflected carcass merit of cull cows. Later lactations led to lower BP compared to cows culled during the first two lactations. Injury, and leg and feet problems negatively affected BP. Productive variables demonstrated that the greater milk production might lead to lower cow prices. A large variation between farms was also noted. In conclusion, price ratio was a good indicator of carcass merit of cull cows, and life history events significantly affected sale barn price and carcass merit of cull cows sold through auction markets.

PSXI-18 Influence of Akaushi Genetics on Beef Performance and Carcass Merit in Grain and Grass-finishing Systems

The study objective was to investigate the impact of beef genetics and finishing system on beef production and carcass merit. Red Angus (RA, n = 30) and RA x Akaushi (AK, n = 30) were equally assigned to one of two finishing treatments: a mixed-species pasture forage (GRASS) or a total mixed feedlot ration (GRAIN) in three replications. Each finishing treatment had free access to mineral and water, and GRAIN were fed once daily (20% hay and 80% concentrate) over 107 d. The grazing period was 80 d. Body weight (BW) was measured after a 12-hour fasting period at the onset and end of the trial. Animals were slaughtered at 18 and 26 mo (GRAIN and GRASS, respectively), and carcass data was collected 48 h postmortem. Initial and final BW were greater for GRAIN (469.7 and 611.0 kg) than GRASS (439.1 and 548.7 kg). Although steers had different total BW gain (141 kg for GRAIN vs 90 kg for GRASS; P < 0.01), there was no difference for average daily gain between two systems. The GRAIN’s advantage in performance, led to higher HCW (+16%), ribeye area (+10%), and backfat (+52%) compared to GRASS. Dressing and marbling score were greater in GRAIN compared to GRASS (61.2 % and 621 vs 57.8 % and 417). The AK cattle presented higher values for dressing (58.7 vs 60.1%; P < 0.0001), ribeye area (70.2 vs 74.3 cm2; P = 0.02), and marbling (548 vs 490, P = 0.03) compared to RA. There was genetics x diet interaction for internal fat, where AK animals had greater value than RA (2.7 vs 2.3%; P < 0.0001) in the GRAIN treatment. These results indicate that GRAIN had superior performance and carcass merit and that AK enhanced these traits to a greater degree as compared to RA.

Candidate serum metabolite biomarkers of residual feed intake and carcass merit in sheep

Mutton and lamb sales continue to grow globally at a rate of 5% per year. However, sheep farming struggles with low profit margins due to high feed costs and modest carcass yields. Selecting those sheep expected to convert feed efficiently and have high carcass merit, as early as possible in their life cycle, could significantly improve the profitability of sheep farming. Unfortunately, direct measurement of feed conversion efficiency (via residual feed intake [RFI]) and carcass merit is a labor-intensive and expensive procedure. Thus, indirect, marker-assisted evaluation of these traits has been explored as a means of reducing the cost of its direct measurement. One promising and potentially inexpensive route to discover biomarkers of RFI and/or carcass merit is metabolomics. Using quantitative metabolomics, we profiled the blood serum metabolome (i.e., the sum of all measurable metabolites) associated with sheep RFI and carcass merit and identified candidate biomarkers of these traits. The study included 165 crossbred ram-lambs that underwent direct measurement of feed consumption to determine their RFI classification (i.e., low vs. high) using the GrowSafe System over a period 40 d. Carcass merit was evaluated after slaughter using standardized methods. Prior to being sent to slaughter, one blood sample was drawn from each animal, and serum prepared and frozen at −80 °C to limit metabolite degradation. A subset of the serum samples was selected based on divergent RFI and carcass quality for further metabolomic analyses. The analyses were conducted using three analytical methods (nuclear magnetic resonance spectroscopy, liquid chromatography mass spectrometry, and inductively coupled mass spectrometry), which permitted the identification and quantification of 161 unique metabolites. Biomarker analyses identified three significant (P < 0.05) candidate biomarkers of sheep RFI (AUC = 0.80), seven candidate biomarkers of carcass yield grade (AUC = 0.77), and one candidate biomarker of carcass muscle-to-bone ratio (AUC = 0.74). The identified biomarkers appear to have roles in regulating energy metabolism and protein synthesis. These results suggest that serum metabolites could be used to categorize and predict sheep for their RFI and carcass merit. Further validation using a larger (3×) and more diverse cohort of sheep is required to confirm these findings.

The Impact of Selection using Residual Average Daily Gain and Marbling EPDs on Growth Performance and Carcass Traits in Angus Steers

ObjectivesProfitability in the beef industry has narrow margins regulated by revenue from output traits like growth and carcass merit, but profitability is also largely impacted by input expenses like feed costs. Selecting for improvements in feed efficiency during the finishing phase, one of the most feed intensive segments of the industry, can help to mitigate those input costs. This study compared growth performance, feed efficiency, body composition, and carcass characteristics in Angus steers (n = 321) from bulls divergently selected for feed efficiency and marbling.Materials and MethodsAngus sires were selected based on high (10th percentile or better) and low (85th percentile or worse) residual average daily gain (RADG) EPD as well as high (fifth percentile or better) and average (near 50th percentile) marbling (MARB) EPD. These criteria resulted in a 2 × 2 factorial design with four breeding lines: high RADG/high MARB, high RADG/average MARB, low RADG/high MARB, low RADG/average MARB. Data were analyzed using MIXED procedures of SAS with RADG and MARB as main effects. Significance was set at α = 0.05. Generation was also analyzed, where generation one (GEN1) steers were from a selected sire while generation two (GEN2) steers were from a selected sire and a selected dam.ResultsUltrasound and carcass data revealed no differences (P ≥ 0.12) in 12th rib backfat thickness from weaning through slaughter for the RADG EPD groups. Yield grade and dressing percent did not differ (P ≥ 0.56) across RADG or MARB groups. At the beginning and end of the feeding trial, the high RADG (P ≤ 0.02) group had larger ultrasound ribeye area (REA) than the low RADG group. Carcass REA tended (P = 0.08) to be larger in the high versus low RADG steers. During the feedlot trial and through slaughter, body weight was heavier (P ≤ 0.006) for the high versus low RADG steers but did not differ (P ≥ 0.44) across MARB EPD. Feed efficiency measures did not differ (P ≥ 0.32) across RADG or MARB groups apart from the tendency (P = 0.08) for residual feed intake to be lower in the high versus low RADG steers. Marbling scores differed (P ≤ 0.04) across RADG and MARB groups with the low RADG steers and the high MARB steers having improved marbling. The quality grade distribution across MARB EPD revealed that the average MARB steers graded 73% Choice and 25% Prime while the high MARB steers graded 56% and 42%, respectively. Slice shear force did not differ (P ≥ 0.32) across RADG or MARB EPD. Body weights tended (P = 0.06) to be heavier at the start of the feeding trial for GEN1 versus GEN2 steers. Total gain, average daily gain, and feed to gain (F:G) differed by generation (P ≤ 0.007) with increased rates of gain and reduced F:G in the GEN2 versus GEN1 steers. Body weights did not differ (P = 0.72) across GEN at the end of the feeding trial. Backfat thickness at the start and end of the feedlot phase was less (P ≤ 0.03) and marbling score was improved (P = 0.02) in the GEN2 versus GEN1 steers, respectively.ConclusionThese results suggest that selection using RADG EPD has negligible impacts on meat quality; and that progress in selection for efficiency can be achieved while advancing carcass quality and value. Furthermore, continued divergent selection for feed efficiency and marbling has the potential to improve feed efficiency through advancements in the rate of gain, while enhancing carcass merit through marbling.