Bioactive Coatings on Titanium: A Review on Hydroxylation, Self-Assembled Monolayers (SAMs) and Surface Modification Strategies

Titanium (Ti) and its alloys have been demonstrated over the last decades to play an important role as inert materials in the field of orthopedic and dental implants. Nevertheless, with the widespread use of Ti, implant-associated rejection issues have arisen. To overcome these problems, antibacterial properties, fast and adequate osseointegration and long-term stability are essential features. Indeed, surface modification is currently presented as a versatile strategy for developing Ti coatings with all these challenging requirements and achieve a successful performance of the implant. Numerous approaches have been investigated to obtain stable and well-organized Ti coatings that promote the tailoring of surface chemical functionalization regardless of the geometry and shape of the implant. However, among all the approaches available in the literature to functionalize the Ti surface, a promising strategy is the combination of surface pre-activation treatments typically followed by the development of intermediate anchoring layers (self-assembled monolayers, SAMs) that serve as the supporting linkage of a final active layer. Therefore, this paper aims to review the latest approaches in the biomedical area to obtain bioactive coatings onto Ti surfaces with a special focus on (i) the most employed methods for Ti surface hydroxylation, (ii) SAMs-mediated active coatings development, and (iii) the latest advances in active agent immobilization and polymeric coatings for controlled release on Ti surfaces.

Modeling the Properties of Curcumin Derivatives in Relation to the Architecture of the Siloxane Host Matrices

Research in the field of natural dyes has constantly focused on methods of conditioning curcumin and diversifying their fields of use. In this study, hybrid materials were obtained from modified silica structures, as host matrices, in which curcumin dyes were embedded. The influence of the silica network structure on the optical properties and the antimicrobial activity of the hybrid materials was monitored. By modifying the ratio between phenyltriethoxysilane:diphenyldimethoxysilane (PTES:DPDMES), it was possible to evaluate the influence the organosilane network modifiers had on the morphostructural characteristics of nanocomposites. The nanosols were obtained by the sol–gel method, in acid catalysis. The nanocomposites obtained were deposited as films on a glass support and showed a transmittance value (T measured at 550 nm) of around 90% and reflectance of about 11%, comparable to the properties of the uncovered support. For the coatings deposited on PET (polyethylene terephthalate) films, these properties remained at average values of T550 = 85% and R550 = 11% without significantly modifying the optical properties of the support. The sequestration of the dye in silica networks reduced the antimicrobial activity of the nanocomposites obtained, by comparison to native dyes. Tests performed on Candida albicans fungi showed good results for the two curcumin derivatives embedded in silica networks (11–18 mm) by using the spot inoculation method; in comparison, the alcoholic dye solution has a spot diameter of 20–23 mm. In addition, hybrids with the CA derivative were the most effective (halo diameter of 17–18 mm) in inhibiting the growth of Gram-positive bacteria, compared to the curcumin derivative in alcoholic solution (halo diameter of 21 mm). The results of the study showed that the presence of 20–40% by weight DPDMES in the composition of nanosols is the optimal range for obtaining hybrid films that host curcumin derivatives, with potential uses in the field of optical films or bioactive coatings.

Osteocytes Influence on Bone Matrix Integrity Affects Biomechanical Competence at Bone-Implant Interface of Bioactive-Coated Titanium Implants in Rat Tibiae

Osseointegration is a prerequisite for the long-term success of implants. Titanium implants are preferred for their biocompatibility and mechanical properties. Nonetheless, the need for early and immediate loading requires enhancing these properties by adding bioactive coatings. In this preclinical study, extracellular matrix properties and cellular balance at the implant/bone interface was examined. Polyelectrolyte multilayers of chitosan and gelatin or with chitosan and Hyaluronic acid fabricated on titanium alloy using a layer-by-layer self-assembly process were compared with native titanium alloy. The study aimed to histologically evaluate bone parameters that correlate to the biomechanical anchorage enhancement resulted from bioactive coatings of titanium implants in a rat animal model. Superior collagen fiber arrangements and an increased number of active osteocytes reflected a significant improvement of bone matrix quality at the bone interface of the chitosan/gelatin-coated titan implants over chitosan/hyaluronic acid-coated and native implants. Furthermore, the numbers and localization of osteoblasts and osteoclasts in the reparative and remodeling phases suggested a better cellular balance in the chitosan/Gel-coated group over the other two groups. Investigating the micro-mechanical properties of bone tissue at the interface can elucidate detailed discrepancies between different promising bioactive coatings of titanium alloys to maximize their benefit in future medical applications.

PROMISING COMPOSITE MATERIALS BASED ON NANOSCALE APATITE WITH GELATIN AS A BINDING AGENT

Порошки наноразмерных гидроксиапатита и фторапатита синтезированы методом осаждения из растворов. В качестве связующего вещества использован пищевой желатин. Такая композиция имеет высокую адгезию на материалах различной природы и пористости. Получены также пористые пленки и гранулы с развитой удельной поверхностью. Рассмотрены их микроструктуры. Изучена возможность использования коллоидной суспензии и водной суспензии кристаллического апатита в сочетании с раствором желатина в качестве биоактивного материала, как для создания покрытий, так и получения гранул. Установлено, что использование порошка апатита совместно с желатином позволяет существенно сократить сроки формирования биоактивного покрытия и значительно повысить его адгезионную прочность. Сопоставлены получаемые гранулы апатита по размерам в зависимости от концентрации желатина в водном растворе. На разработанные биоактивные покрытия и гранулированный материал на основе наноразмерного апатита со связующим агентом поданы заявки на патент. Nanoscale hydroxyapatite and fluorapatite powders were synthesized by precipitation from solutions. Food gelatin is used as a binder. This composition has a high adhesion on materials of different nature and porosity. Porous films and granules with a developed specific surface area were also obtained. Their microstructures are considered. The possibility of using a colloidal suspension and an aqueous suspension of crystalline apatite in combination with a gelatin solution as a bioactive material, both for creating coatings and obtaining granules, has been studied. It is established that the use of apatite powder together with gelatin can significantly reduce the time of formation of a bioactive coating and significantly increase its adhesive strength. The obtained apatite granules are compared in size depending on the concentration of gelatin in an aqueous solution. Patent applications have been filed for the developed bioactive coatings and granular material based on nanoscale apatite with a binding agent.

NITROGEN THERMAL DESORPTION OF AS A CONTROL METHOD FOR DETERMINATION OF THE NANOPARTICLE SIZE IN COMPOSITIONS BASED ON ZINC OXIDE AND HYDROXYAPATITE

Работа посвящена анализу возможности применения метода тепловой десорбции азота для определения размеров наночастиц в композициях на основе гидроксиапатита и оксида цинка, изготовленных в форме таблеток с помощью ручного гидравлического пресса. Исходные порошки гидроксиапатита получены методом химического осаждения с использованием микроволнового излучения. С применением сорбционного метода БЭТ анализируется удельная поверхность порошков, составляющих композиции, до и после прессования, исследуется влияние состава композиций на удельную поверхность. Приводится расчет средних размеров наночастиц в композициях на основе результатов сорбционных измерений в рамках моделей сферических и стержневидных наночастиц. Область применения рассматриваемых материалов - медицина, в том числе использование в адресной доставке лекарств и в костной инженерии в качестве биоактивных покрытий, нанесенных на поверхность металлического биоимплантата. In this paper we consider the possibility of using the nitrogen thermal desorption method for determining the size of nanoparticles in compositions based on hydroxyapatite and zinc oxide. The compositions in the form of tablets were obtained using a manual water press. The initial powders of hydroxyapatite were obtained by chemical deposition using a microwave radiation. Using the BET sorption method, the specific surface area of the powders is analyzed before and after pressing, and the effect of the composition formulation on the specific surface area is investigated. The calculation of the average sizes of nanoparticles in composites is given on the basis of the results of sorption measurements within the framework of the models of spherical and rod-like nanoparticles. The field of application of the materials under consideration is medicine, including the use of nanocomposites in targeted drug delivery and in bone engineering as bioactive coatings applied to the surface of a metal bioimplant.

Analytical Techniques for the Characterization of Bioactive Coatings for Orthopaedic Implants

The development of bioactive coatings for orthopedic implants has been of great interest in recent years in order to achieve both early- and long-term osseointegration. Numerous bioactive materials have been investigated for this purpose, along with loading coatings with therapeutic agents (active compounds) that are released into the surrounding media in a controlled manner after surgery. This review initially focuses on the importance and usefulness of characterization techniques for bioactive coatings, allowing the detailed evaluation of coating properties and further improvements. Various advanced analytical techniques that have been used to characterize the structure, interactions, and morphology of the designed bioactive coatings are comprehensively described by means of time-of-flight secondary ion mass spectrometry (ToF-SIMS), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), 3D tomography, quartz crystal microbalance (QCM), coating adhesion, and contact angle (CA) measurements. Secondly, the design of controlled-release systems, the determination of drug release kinetics, and recent advances in drug release from bioactive coatings are addressed as the evaluation thereof is crucial for improving the synthesis parameters in designing optimal bioactive coatings.

Bioactive Coatings Loaded with Osteogenic Protein for Metallic Implants

Osteoconductive and osteoinductive coatings represent attractive and tunable strategies towards the enhanced biomechanics and osseointegration of metallic implants, providing accurate local modulation of bone-to-implant interface. Composite materials based on polylactide (PLA) and hydroxyapatite (HAp) are proved beneficial substrates for the modulation of bone cells’ development, being suitable mechanical supports for the repair and regeneration of bone tissue. Moreover, the addition of osteogenic proteins represents the next step towards the fabrication of advanced biomaterials for hard tissue engineering applications, as their regulatory mechanisms beneficially contribute to the new bone formation. In this respect, laser-processed composites, based on PLA, Hap, and bone morphogenetic protein 4(BMP4), are herein proposed as bioactive coatings for metallic implants. The nanostructured coatings proved superior ability to promote the adhesion, viability, and proliferation of osteoprogenitor cells, without affecting their normal development and further sustaining the osteogenic differentiation of the cells. Our results are complementary to previous studies regarding the successful use of chemically BMP-modified biomaterials in orthopedic and orthodontic applications.

Bioactive coatings on 3D printed titanium implants with a complex internal structure for bone replacement

The micro-arc oxidation method was applied to modify the surface of 3D printed titanium implants with a complex internal structure. Two different electrolyte solutions were used for thesurface modification, for which the respective working parameters of the micro-arc oxidation process were developed. Surface coatings formed with these parameters on the 3D implants have the same chemical composition and have the same surface morphology as surface coatings on 2D substrates. The measurement of the coating thickness using the X-ray microtomography demonstrates that this method is a useful tool for the thickness control of porous surface coatings at the inside and outside of the 3D titanium implants.

Capacitive interdigitated system of high osteoinductive/conductive performance for personalized acting-sensing implants

Replacement orthopedic surgeries are among the most common surgeries worldwide, but clinically used passive implants cannot prevent failure rates and inherent revision arthroplasties. Optimized non-instrumented implants, resorting to preclinically tested bioactive coatings, improve initial osseointegration but lack long-term personalized actuation on the bone–implant interface. Novel bioelectronic devices comprising biophysical stimulators and sensing systems are thus emerging, aiming for long-term control of peri-implant bone growth through biointerface monitoring. These acting-sensing dual systems require high frequency (HF) operations able to stimulate osteoinduction/osteoconduction, including matrix maturation and mineralization. A sensing-compatible capacitive stimulator of thin interdigitated electrodes and delivering an electrical 60 kHz HF stimulation, 30 min/day, is here shown to promote osteoconduction in pre-osteoblasts and osteoinduction in human adipose-derived mesenchymal stem cells (hASCs). HF stimulation through this capacitive interdigitated system had significant effects on osteoblasts’ collagen-I synthesis, matrix, and mineral deposition. A proteomic analysis of microvesicles released from electrically-stimulated osteoblasts revealed regulation of osteodifferentiation and mineralization-related proteins (e.g. Tgfb3, Ttyh3, Itih1, Aldh1a1). Proteomics data are available via ProteomeXchange with the identifier PXD028551. Further, under HF stimulation, hASCs exhibited higher osteogenic commitment and enhanced hydroxyapatite deposition. These promising osteoinductive/conductive capacitive stimulators will integrate novel bioelectronic implants able to monitor the bone–implant interface and deliver personalized stimulation to peri-implant tissues.