Dipole-induced Ohmic contacts between monolayer Janus MoSSe and bulk metals

Utilizing a two-dimensional material in an electronic device as channel layer inevitably involves the formation of contacts with metallic electrodes. As these contacts can dramatically affect the behavior of the device, we study the electronic properties of monolayer Janus MoSSe in contact with different metallic electrodes by first-principles calculations, focusing on the differences in the characteristics of contacts with the two sides of MoSSe. In particular, we demonstrate that the Fermi level pinning is different for the two sides of MoSSe, with the magnitude resembling that of MoS2 or MoSe2, while both sides can form Ohmic contacts with common electrode materials without any further adaptation, which is an outstanding advantage over MoS2 and MoSe2.

Design of Driving Waveform for Shortening Red Particles Response Time in Three-Color Electrophoretic Displays

Three-color electrophoretic displays (EPDs) have the advantages of multi-color display and low power consumption. However, their red particles have the disadvantage of long response time. In this paper, a driving waveform, which is based on electrophoresis theory and reference gray scale optimization, was proposed to shorten the response time of red particles in three-color EPDs. The driving waveform was composed of erasing stage, reference gray scale forming stage, red driving stage, and white or black driving stage. Firstly, the characteristics of particle motion were analyzed by electrophoresis theory and Stokes law. Secondly, the reference gray scale of the driving waveform was optimized to shorten the distance between red particles and a common electrode plate. Finally, an experimental platform was developed to test the performance of the driving waveform. Experimental results showed that the proposed driving waveform can shorten the response time of red particles by 65.57% and reduce the number of flickers by 66.67% compared with the traditional driving waveform.

EEG Assessment in Patients With Disorders of Consciousness: Aims, Advantages, Limits, and Pitfalls

This study presents a brief review of literature exploring simple EEG-polygraphic examinations and procedures that can be carried out at a patient's bedside. These include EEG with a common electrode array and sleep evaluation. The review briefly discusses more complex analytical techniques, such as the application of advanced EEG signal processing methods developed by our research group, to define what type of consistent markers are suitable for clinical use or to better understand complex patient conditions. These advanced analytical techniques aim to detect relevant EEG-based markers that could be useful in evaluating patients and predicting outcomes. These data could contribute to future developments in research.

A novel method for noninvasive bioelectric measurement utilizing conductivity of seawater

A novel method of noninvasive bioelectric measurement that utilizes the conductivity of seawater covering a person’s whole body is proposed. Concretely, a conductor used as a common electrode is sunk into the seawater, and four special bioelectrodes isolated from the seawater are attached at measurement points on the body. Bioelectric signals generated between the common electrode and special bioelectrodes are then measured. To verify the effectiveness of the proposed method, bioelectric signals of six participants immersed in a bathtub filled with seawater were experimentally measured. The measurement results revealed that the proposed method enables multipoint bioelectric measurement using about half the number of bioelectrodes used by the conventional method on land, and a plurality of bioelectric phenomena can be observed at one measurement point. It was also revealed that compared with the conventional method, the proposed method significantly reduces external electrical noise included in the bioelectric signals by exploiting the shielding effect of seawater. If simple bioelectric measurements in seawater were possible in the manner described above, not only people such as scuba divers but also precious animals living in the sea could be noninvasively treated as measurement subjects.

Reduced extrinsic recombination process in anatase and rutile TiO2 epitaxial thin films for efficient electron transport layers

TiO2 is the most widely used material for the electron transport layers (ETLs) because it is characterized by proper band alignment with light absorbers, adequate optical transmittance, and high electron mobility. There are two thermodynamically stable crystal phases of TiO2: anatase and rutile. However, understanding which phase is more effective as the ETL is still required. In this paper, we demonstrate the different effects of using epitaxial anatase TiO2 and epitaxial rutile TiO2 (both grown using pulsed laser deposition) as the ETL material on the electrical and optical properties. Epitaxial Nb-doped TiO2 layers were used as the common electrode material for the both epitaxial ETLs for which the crystalline structural analysis revealed high crystalline qualities and good coherency for both phases. By analyzing the recombination kinetics, the anatase phase shows a preferable performance in comparison with the rutile phase, although both epitaxial phases show remarkably reduced extrinsic recombination properties, such as trap-assisted recombination. This study demonstrates not only a better electron transporting performance of anatase phase but also reduced extrinsic recombination through epitaxy growth.

Design of Driving Waveform Based on a Damping Oscillation for Optimizing Red Saturation in Three-Color Electrophoretic Displays

At present, three-color electrophoretic displays (EPDs) have problems of dim brightness and insufficient color saturation. In this paper, a driving waveform based on a damping oscillation was proposed to optimize the red saturation in three-color EPDs. The optimized driving waveform was composed of an erasing stage, a particles activation stage, a red electrophoretic particles purification stage, and a red display stage. The driving duration was set to 360 ms, 880 ms, 400 ms, and 2400 ms, respectively. The erasing stage was used to erase the current pixel state and refresh to a black state. The particles’ activation stage was set as two cycles, and then refreshed to the black state. The red electrophoretic particles’ purification stage was a damping oscillation driving waveform. The red and black electrophoretic particles were separated by changing the magnitude and polarity of applied electric filed, so that the red electrophoretic particles were purified. The red display stage was a low positive voltage, and red electrophoretic particles were driven to the common electrode to display a red state. The experimental results showed that the maximum red saturation could reach 0.583, which was increased by 27.57% compared with the traditional driving waveform.

Membrane Protein Modified Electrodes in Bioelectrocatalysis

Transmembrane proteins involved in metabolic redox reactions and photosynthesis catalyse a plethora of key energy-conversion processes and are thus of great interest for bioelectrocatalysis-based applications. The development of membrane protein modified electrodes has made it possible to efficiently exchange electrons between proteins and electrodes, allowing mechanistic studies and potentially applications in biofuels generation and energy conversion. Here, we summarise the most common electrode modification and their characterisation techniques for membrane proteins involved in biofuels conversion and semi-artificial photosynthesis. We discuss the challenges of applications of membrane protein modified electrodes for bioelectrocatalysis and comment on emerging methods and future directions, including recent advances in membrane protein reconstitution strategies and the development of microbial electrosynthesis and whole-cell semi-artificial photosynthesis.

Ionic Conduction Through Reaction Products at the Electrolyte/electrode Interface in All-Solid-State Li⁺ Batteries

The development of all-solid-state lithium ion batteries has been hindered by the formation of a poorly conductive interphase at the interface between electrode and electrolyte materials. In the manuscript, we shed light on this problem by computationally evaluating potential lithium ion diffusion pathways through metastable arrangements of product phases that can form at 56 interfaces between common electrode and electrolyte materials. The evaluation of lithium-ion conductivities in the product phases is made possible by the use of machine-learned interatomic potentials trained on the fly. We identify likely reasons for the degradation of solid-state battery performance and discuss how these problems could be mitigated. These results provide enhanced understanding of how interface impedance growth limits the performance of all-solid-state lithium-ion batteries.

Ionic Conduction Through Reaction Products at the Electrolyte/electrode Interface in All-Solid-State Li⁺ Batteries

The development of all-solid-state lithium ion batteries has been hindered by the formation of a poorly conductive interphase at the interface between electrode and electrolyte materials. In the manuscript, we shed light on this problem by computationally evaluating potential lithium ion diffusion pathways through metastable arrangements of product phases that can form at 56 interfaces between common electrode and electrolyte materials. The evaluation of lithium-ion conductivities in the product phases is made possible by the use of machine-learned interatomic potentials trained on the fly. We identify likely reasons for the degradation of solid-state battery performance and discuss how these problems could be mitigated. These results provide enhanced understanding of how interface impedance growth limits the performance of all-solid-state lithium-ion batteries.

Multichannel cell detection in microcompartments by means of true parallel measurements using the Solartron S-1260

Designing proper frontend electronics is critical in the development of highly sophisticated electrode systems. Multielectrode arrays for measuring electrical signals or impedance require multichannel readout systems. Even more challenging is the differential or ratiometric configuration with simultaneous assessment of measurement and reference channels. In this work, an eight-channel frontend was developed for contacting a 2×8 electrode array (8 measurement and 8 reference electrodes) with a large common electrode to the impedance gain-phase analyzer Solartron 1260 (S-1260). Using the three independent and truly parallel monitor channels of the S-1260, impedance of trapped cells and reference material was measured at the same time, thereby considerably increasing the performance of the device. The frontend electronics buffers the generator output and applies a potentiostatic signal to the common electrode of the chip. The applied voltage is monitored using the current monitor of the S-1260 via voltage/current conversion. The frontend monitors the current through the electrodes and converts it to a voltage fed into the voltage monitors of the S-1260. For assessment of the 8 electrode pairs featured by the chip, a relay-based multiplexer was implemented. Extensive characterization and calibration of the frontend were carried out in a frequency range between 100 Hz and 1 MHz. Investigating the influence of the multiplexer and the frontend electronics, direct measurement with and without frontend was compared. Although differences were evident, they have been negligible below one per cent. The significance of measurement using the complex S-1260-frontend-electrode was tested using Kohlrausch's law. The impedance of an electrolytic dilution series was measured and compared to the theoretical values. The coincidence of measured values and theoretical prediction serves as an indicator for electrode sensitivity to cell behavior. Monitoring of cell behavior on the microelectrode surface will be shown as an example.