A Fast-Response Driving Waveform Design Based on High-Frequency Voltage for Three-Color Electrophoretic Displays

Three-color electrophoretic displays (EPDs) have the characteristics of colorful display, reflection display, low power consumption, and flexible display. However, due to the addition of red particles, response time of three-color EPDs is increased. In this paper, we proposed a new driving waveform based on high-frequency voltage optimization and electrophoresis theory, which was used to shorten the response time. The proposed driving waveform was composed of an activation stage, a new red driving stage, and a black or white driving stage. The response time of particles was effectively reduced by removing an erasing stage. In the design process, the velocity of particles in non-polar solvents was analyzed by Newton’s second law and Stokes law. Next, an optimal duration and an optimal frequency of the activation stage were obtained to reduce ghost images and improve particle activity. Then, an optimal voltage which can effectively drive red particles was tested to reduce the response time of red particles. Experimental results showed that compared with a traditional driving waveform, the proposed driving waveform had a better performance. Response times of black particles, white particles and red particles were shortened by 40%, 47.8% and 44.9%, respectively.

PSIV-B-18 Performance response of weanling and grower pigs fed graded levels of poultry byproduct meal (PBM) in the diet

Two experiments were conducted to investigate effects of feeding graded levels of PBM on performance of weanling pigs and to evaluate feed preference for PBM-based diets relative to spray-dried plasma protein (SDPP)-based diets. A third experiment evaluated PBM in grower diets on performance. In Exp. 1, 120 pigs [body weight (BW) 7.1 ± 0.6 kg] were randomly allotted to 1 of 5 treatments (0, 1, 2, 3, or 5% PBM) and housed 4 pigs/pen for a 28-d growth trial. In Exp. 2, 60 pigs (BW 6.7 ± 1.4 kg) were randomly allotted to 1 of 3 comparisons including: Comparison 1) 0% PBM vs. 2% PBM, Comparison 2) 0% PBM vs. 2% SDPP, and Comparison 3) 2% PBM vs. 2% SDPP and housed 4 pigs/pen for a 28-d preference trial; pigs were provided ad libitum access to feeders; feeder location was switched 3 times/wk. In Exp. 3, 120 pigs (BW 25.9 ± 2.1 kg) were randomly allotted to 1 of 4 treatments (0, 1.25, 2.5 or 5% PBM) and housed 5 pigs/pen for a 41-d growth trial. Increasing PBM from 0 to 5% in Exp. 1 resulted in no differences in ADG (398, 417, 424, 432, and 428 g) or G:F (0.675, 0.686, 0.733, 0.711, and 0.717). Feed preference results (Exp. 2) demonstrated that pigs consumed a higher percentage (76 vs. 24%, P < 0.01) of their total feed intake from the 2% PBM-based diet compared to the 2% SDPP-based diet (Comparison 3). In Exp. 3, increasing PBM for grower pigs resulted in no differences in ADG (1007, 1025, 1002, and 1025 g) or G:F (0.484, 0.472, 0.484, and 0.478). Thus, feeding PBM up to 5% of the diet had no effect on overall performance of nursery or grower pigs, indicating it is an acceptable option as a feed ingredient.

Comparison of lightweight frameworks for Java by analyzing proprietary web applications

There are many frameworks available in the IT environment that differ in performance, security, complexity, and speed. The user who wants to start working with the selected framework should know whether it will meet the architectural requirements and business assumptions. The aim of this work is to compare the performance and complexity of web applications built using different lightweight frameworks for the Java language. Spring Boot, Micronaut, Quarkus and Javalin frameworks will be compared. At the beginning of the work, the main problems related to the creation of modern applications were discussed. In the following sections, basic analysis of the complexity of the syntax and conventions of the selected skeletons was performed. Then, experiments were conducted to compare performance - response and build times and memory consumption during application development and use. A wide cross-section of efficiency has been obtained in selected lightweight framework usages. The prepared comparison can be used to select the appropriate framework for the project.

Effect of Blade Leading and Trailing Edge Configurations on the Performance of a Micro Tubular Propeller Turbine Using Response Surface Methodology

With the recent rise in importance of environmental issues, research on micro hydropower, a kind of renewable energy source, is being actively conducted. In this study, a micro tubular propeller turbine was selected for study of micro hydropower in pipes. Numerical analysis was conducted to evaluate the performance. Response surface methodology using design of experiments was performed to efficiently investigate the effect of the blade leading and trailing edge elliptic aspect ratios on the performance. The trailing edge configuration was found to be more related to the performance, because of the drastic pressure variation due to the stagnation point formed, regardless of the leading edge configuration. To improve the performance, a NACA airfoil was introduced. The results show that the flow became more stable than the reference model, and the efficiency was increased by 2.44%.

Factors affecting performance response of pigs exposed to different challenge models: a multivariate approach

Factors associated with the severity with which different challenge models (CMs) compromise growth performance in pigs were investigated using hierarchical clustering on principal components (HCPC) analysis. One hundred seventy-eight studies reporting growth performance variables (average daily gain [ADG], average daily feed intake [ADFI], gain:feed [GF], and final body weight [FBW]) of a Control (Ct) vs. a Challenged (Ch) group of pigs using different CMs (enteric [ENT], environmental [ENV], lipopolysaccharide [LPS], respiratory [RES], or sanitary condition [SAN] challenges) were included. Studies were grouped by similarity in performance in three clusters (C1, C2, and C3) by HCPC. The effects of CM, cluster, and sex (males [M], females [F], mixed [Mi]) were investigated. Linear (LRP) and quadratic (QRP) response plateau models were fitted to assess the interrelationships between the change in ADG (∆ADG) and ADFI (∆ADFI) and the duration of challenge. All variables increased from C1 through C3, except for GF, which decreased (P < 0.05). LPS was more detrimental to ADG than ENV, RES, and SAN models (P < 0.05). Furthermore, LPS also lowered GF more than all the other CMs (P < 0.05). The ∆ADG independent of ∆ADFI was significant in LPS and SAN (P < 0.05), showed a trend toward the significance in ENT and RES (P < 0.10), and was not significant in ENV (P > 0.10), while the ∆ADG dependent on ∆ADFI was significant in ENT, ENV, and LPS only (P < 0.05). The critical value of ∆ADFI influencing the ∆ADG was significant in pigs belonging to C1 (P < 0.05) but not C2 or C3 (P > 0.10). The ∆ADG independent of duration post-Ch (irreparable portion of growth) was significant in C1 and C2 pigs, whereas the ∆ADFI independent of duration post-Ch (irreparable portion of feed intake) was significant in C1 pigs only (P < 0.05). Moreover, the time for recovery of ADG and ADFI after Ch was significant in pigs belonging to C1 and C2 (P < 0.05). Control F showed reduced ADG compared with Ct-M, and Ch-F showed reduced ADFI compared with Ch-M (P < 0.05). Moreover, the irreparable portion of ΔADG was 4.8 higher in F (−187.7; P < 0.05) compared with M (−39.1; P < 0.05). There are significant differences in growth performance response to CM based on cluster and sex. Furthermore, bacterial lipopolysaccharide appears to be an appropriate noninfectious model for immune stimulation and growth impairment in pigs.

Research on Catalytic Denitrification by Zero-Valent Iron (Fe0) and Pd-Ag Catalyst

This study primarily focused on how to effectively remove nitrate by catalytic denitrification through zero-valent iron (Fe0) and Pd-Ag catalyst. In order to get better catalytic performance, response surface methodology (RSM), instead of the single factor experiments and orthogonal tests, was firstly applied to optimize the condition parameters of the catalytic process. Results indicated that RSM is accurate and feasible for the condition optimization of catalytic denitrification. Better catalytic performance (71.6% N2 Selectivity) was obtained under the following conditions: 5.1 pH, 127 min reaction time, 3.2 mass ration (Pd: Ag), and 4.2 g/L Fe0, which was higher than the previous study designed by the single factor experiments (68.1%) and orthogonal tests (68.7%). However, under the optimal conditions, N2 selectivity showed a mild decrease (69.3%), when the real wastewater was used as the influent. Further study revealed that the cations (e.g., K+, Na+, Ca2+, Mg2+, and Al3+) and anions (e.g., Cl-, HCO3-, and SO42-) exist in wastewater may have distinctive influence on N2 selectivity. Finally, the reaction mechanism and kinetic model of catalytic denitrification were further studied.

PSIV-20 Impact of High Protein Dried Distiller Grains and Soybean Meal Inclusion Level on Grow-finish Pig Performance and Carcass Traits

High protein dried distiller grains are a novel protein source for commercial swine diets. Questions related to how concentrations of branched chain amino acids (BCAA) in corn protein sources affect pig performance remain. A randomized complete block design (RCBD) grow-finish experiment was conducted at the South Dakota State University Commercial Research Facility using NexPro® protein ingredient (HPDDG) to determine the performance response of grow-finish pigs fed corrected levels of BCAA through soybean meal (SBM) or synthetic amino acids (SAA). Pigs (n = 1,170; 59.5 ± 0.48 kg) were used in a 79-d study (9 replicates per treatment). Pens of pigs were allotted to one of five dietary treatments which consisted of 1) corn-SBM diet, 2) HPDDG not corrected for BCAA levels or HPDDG corrected for BCAA levels through additions of 3) SBM, 4) 50% SBM and 50% SAA blend or 5) SAA only. The HPDDG were included in diets at 15% in phase 1 and 10% in phases 2 and 3. Additions of SAA were included to maintain a SID Ile:Lys of 65% and SID Val:Lys of 75% for BCAA corrected diets. Data was analyzed as a RCBD, pair-wise comparisons and single degree of freedom orthogonal polynomials (BCAA corrected only) were used to evaluate treatment responses, and pen served as the experimental unit for all analyses. Reducing SBM in BCAA corrected diets decreased cumulative ADG and G:F (linear; P < 0.05). Decreasing SBM in BCAA corrected diets tended to decrease (linear; P = 0.09) standardized fat-free lean but increase (linear; P = 0.07) dressing percent and back fat depth (quadratic; P = 0.08) while not impacting hot carcass weight (P > 0.14). This data indicates HPDDG is a suitable feedstuff for grow-finish swine diets at low inclusion levels due to minimal impact on performance and carcass characteristics. Correction of BCAA levels through SBM inclusion provided an improved performance response compared to SAA only.

Comparative chemical composition of 24-hour fermented sweet orange fruit (Citrus sinensis) peel meal and maize and effect on performance response of starting pullet chicks

The study evaluated the effect of 24-hour fermentation of sweet orange fruit (Citrus sinensis) peel meal (24SOFPM) on its chemical composition and performance response to graded levels of peel meal in the diets of pullet chicks. Dry matter, crude protein and phosphorus level in 24SOFPM were close to that of maize. While limonene was higher in 24SOPFM, phytate was higher in maize than the 24SOPFM. One hundred and forty-four fourteen dayold Nera black pullet chicks were assigned to four experimental diets F0, F10, F20 and F30. SOPFM substituted maize in F0, F10, F20 and F30 respectively at 0, 10, 20 and 30%. The feeding trial lasted the remaining 6 weeks of the chicks’ phase. The study design was Completely Randomized Design. Daily feed intake was not significantly different (p>0.05). Average body weight gain was significantly different (p<0.05) and was depressed with no definite pattern in the SOPFM based diets. FCR was significantly different (p<0.05). Substitution of maize with SOFPM significantly (p<0.05) reduced feed cost/25kg, feed cost/bird and cost of production while decreasing efficiency of feed utilization for growth. Apparently, SOPFM might be a potential feedstuff which could substitute a proportion of maize in pullet chick’s diet when fermented for 24 hours.