scholarly journals A Fast-Response Driving Waveform Design Based on High-Frequency Voltage for Three-Color Electrophoretic Displays

Micromachines ◽  
2021 ◽  
Vol 13 (1) ◽  
pp. 59
Author(s):  
Hu Zhang ◽  
Zichuan Yi ◽  
Liming Liu ◽  
Feng Chi ◽  
Yunfeng Hu ◽  
...  
Keyword(s):  
Response Time ◽  
High Frequency ◽  
Response Times ◽  
Fast Response ◽  
Waveform Design ◽  
Optimal Frequency ◽  
Polar Solvents ◽  
Flexible Display ◽  
Performance Response ◽  
Driving Waveform

Three-color electrophoretic displays (EPDs) have the characteristics of colorful display, reflection display, low power consumption, and flexible display. However, due to the addition of red particles, response time of three-color EPDs is increased. In this paper, we proposed a new driving waveform based on high-frequency voltage optimization and electrophoresis theory, which was used to shorten the response time. The proposed driving waveform was composed of an activation stage, a new red driving stage, and a black or white driving stage. The response time of particles was effectively reduced by removing an erasing stage. In the design process, the velocity of particles in non-polar solvents was analyzed by Newton’s second law and Stokes law. Next, an optimal duration and an optimal frequency of the activation stage were obtained to reduce ghost images and improve particle activity. Then, an optimal voltage which can effectively drive red particles was tested to reduce the response time of red particles. Experimental results showed that compared with a traditional driving waveform, the proposed driving waveform had a better performance. Response times of black particles, white particles and red particles were shortened by 40%, 47.8% and 44.9%, respectively.

scholarly journals Pengembangan Sistem Diseminasi Prakiraan Cuaca Menggunakan Aplikasi Bot Telegram dengan Metode Webhook

2020 ◽  
Vol 12 (1) ◽  
pp. 41-47
Author(s):  
TrI Istiana ◽  
Raksaka Indra A ◽  
G.S. Budhi Dharmawan ◽  
Bowo Prakoso
Keyword(s):  
Response Time ◽  
Satellite Imagery ◽  
Response Times ◽  
Instant Messaging ◽  
System Development ◽  
Performance Testing ◽  
Weather Forecast ◽  
Fast Response ◽  
Operational Environment ◽  
Service Application

An official weather forecast dissemination application named @infoBMKG developed for Android and iOS by BMKG available since 2016. Following users behaviour on instant messaging service application, system development is necessary needed for accommodating request-based dissemination. The Telegram Bot feature with Webhook method is applied because of the efficiency on coding for initial setup in the development of Telegram Bot. Therefore, it allows fast response in sending reply to any request. There are three main menus in the design of the telegram Bot (@BMKGbot) displayed as Weather Forecast, Airport Weather, and Satellite Imagery. As results of performance testing, the average response time dissemination-request 2.54s  for Weather Forecast, 2.76s for Airport Weather and 7.28s for Satellite Imagery. Bigger size of data disseminated in an image format of satellite imagery cause longer response time, however the performance testing obtain response times within satisfactory period and meet as expected.  It is recommended to implement @BMKGbot at reliable hosting service on its operational environment for chasing users’ satisfaction with high availability services in term of weather forecast dissemination.

scholarly journals Design of Driving Waveform Based on Overdriving Voltage for Shortening Response Time in Electrowetting Displays

2021 ◽  
Vol 9 ◽  
Author(s):  
Wenjun Zeng ◽  
Zichuan Yi ◽  
Yiming Zhao ◽  
Weibo Zeng ◽  
Simin Ma ◽  
...  
Keyword(s):  
Response Time ◽  
Physical Model ◽  
Performance Testing ◽  
Charge Trapping ◽  
Response Speed ◽  
Fast Response ◽  
Optimal Performance ◽  
Experimental Results ◽  
Target Luminance ◽  
Driving Waveform

A fast response speed of a pixel is important for electrowetting displays (EWDs). However, traditional driving waveforms of EWDs have the disadvantage of long response time. So, a driving waveform, which based on overdriving voltages and charge trapping theory, was proposed in this paper to shorten the response time of EWDs. The driving waveform was composed of an overdriving stage and a driving stage. Firstly, a simplified physical model was introduced to analyze the influence of driving voltages on the response time. Then, an overdriving voltage was applied in the overdriving stage to increase the respond speed of oil, and a target voltage was applied in the driving stage to obtain a target luminance. In addition, the effect of different overdriving voltages and overdriving time values on the response time was analyzed by charge trapping theory to achieve an optimal performance. Finally, the driving waveform was imported into an EWD for performance testing. Experimental results showed that the response time of the EWD can be shortened by 29.27% compared with a PWM driving waveform.

Application of Nano-Sized CeO2 Powder for Fast Response Oxygen Sensors

2009 ◽  
Vol 421-422 ◽  
pp. 323-327
Author(s):  
Norimitsu Murayama ◽  
Noriya Izu ◽  
Woosuck Shin ◽  
Ichiro Matsubara
Keyword(s):  
Response Time ◽  
High Frequency ◽  
Oxygen Sensor ◽  
Diffusion Rate ◽  
Technological Development ◽  
Fast Response ◽  
Sine Wave ◽  
High Frequency Region ◽  
The Relationship ◽  
Grain Diameter

For resistive oxygen sensor elements of Ce1-xZrxO2 (x = 0.0, 0.05, 0.1, 0.2), grain diameter was varied in the range of 86 – 300 nm by changing sintering temperature or changing Zr content. The grain diameter decreased with increasing Zr content. The response time was approximately proportional to the square of the grain diameter. In the relationship between the amplitude of sensor output, An and the frequency, f of sine wave of variation in oxygen partial pressure, the gradient in the high-frequency region of a plot of log An vs. log f in was approximately –0.5. From these results, it was concluded that the sensor response was determined by the oxygen vacancy diffusion rate. The grain diameter of Ce0.8Zr0.2O2 element was 86 nm and the response time at 1073 K was 9 ms, which result opens the door to the technological development of independent control of engine cylinders.

scholarly journals Design of Driving Waveform for Shortening Response Time of Black Particles and White Particles in Three-Color Electrophoretic Displays

Micromachines ◽  
2021 ◽  
Vol 12 (11) ◽  
pp. 1306
Author(s):  
Hu Zhang ◽  
Zichuan Yi ◽  
Simin Ma ◽  
Shaoning Deng ◽  
Weibiao Zhou ◽  
...  
Keyword(s):  
Response Time ◽  
High Frequency ◽  
Oscillation Period ◽  
Experimental Results ◽  
High Frequency Oscillation ◽  
Frequency Oscillation ◽  
Motion Characteristics ◽  
Driving Waveform

The shortage of color in traditional electrophoretic displays (EPDs) can be compensated by three-color EPDs. However, the response time of black particles and white particles is increased. A new driving waveform based on the principle of three-color EPDs and electrophoresis theory was proposed to shorten the response time of black particles and white particles. The proposed driving waveform consisted of an erasing stage, an activation stage, a red driving stage, and a white or a black driving stage. The activation stage was mainly optimized in this paper. Firstly, the motion characteristics of the particles were analyzed using Stokes law and electrophoresis theory. Secondly, an optimal high frequency oscillation voltage was tested in order to improve the activity of the particles. Then, the influence of oscillation period and oscillation times on the activation stage were analyzed for optimizing the reference grayscale. According to the luminance of pixels, an oscillation period of 30 ms and an oscillation time of 30 were determined. The experimental results showed that the response time of black particles was shortened by 45%, and the response time of white particles was shortened by 40% compared with a traditional driving waveform.

Nanostructure of semiconductor quantum dots in a borosilicate glass matrix by complementary use of HREM and AEM

1990 ◽  
Vol 48 (4) ◽  
pp. 728-729
Author(s):  
M.J. Kim ◽  
L.C. Liu ◽  
S.H. Risbud ◽  
R.W. Carpenter
Keyword(s):  
Quantum Dots ◽  
Borosilicate Glass ◽  
Glass Matrix ◽  
Optical Switching ◽  
Response Times ◽  
Fast Response ◽  
Processing Technique ◽  
Internal Stresses ◽  
Electron Hole ◽  
Spatial Dimensions

When the size of a semiconductor is reduced by an appropriate materials processing technique to a dimension less than about twice the radius of an exciton in the bulk crystal, the band like structure of the semiconductor gives way to discrete molecular orbital electronic states. Clusters of semiconductors in a size regime lower than 2R {where R is the exciton Bohr radius; e.g. 3 nm for CdS and 7.3 nm for CdTe) are called Quantum Dots (QD) because they confine optically excited electron- hole pairs (excitons) in all three spatial dimensions. Structures based on QD are of great interest because of fast response times and non-linearity in optical switching applications.In this paper we report the first HREM analysis of the size and structure of CdTe and CdS QD formed by precipitation from a modified borosilicate glass matrix. The glass melts were quenched by pouring on brass plates, and then annealed to relieve internal stresses. QD precipitate particles were formed during subsequent "striking" heat treatments above the glass crystallization temperature, which was determined by differential thermal analysis.

Compact and efficient gas diffusion electrodes based on nanoporous alumina membranes for microfuel cells and gas sensors

The Analyst ◽  
2020 ◽  
Vol 145 (1) ◽  
pp. 122-131 ◽  
Author(s):  
Wanda V. Fernandez ◽  
Rocío T. Tosello ◽  
José L. Fernández
Keyword(s):  
Response Times ◽  
Hydrogen Oxidation ◽  
Fast Response ◽  
Gas Diffusion ◽  
Limiting Current ◽  
Gas Diffusion Electrodes ◽  
Nanoporous Alumina ◽  
Alumina Membranes ◽  
Current Densities ◽  
Microfuel Cells

Gas diffusion electrodes based on nanoporous alumina membranes electrocatalyze hydrogen oxidation at high diffusion-limiting current densities with fast response times.

scholarly journals Dual-Cation Electrolytes Crosslinked with MXene for High-Performance Electrochromic Devices

Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 874
Author(s):  
Soyoung Bae ◽  
Youngno Kim ◽  
Jeong Min Kim ◽  
Jung Hyun Kim
Keyword(s):  
Ionic Conductivity ◽  
Response Time ◽  
Indium Tin Oxide ◽  
High Performance ◽  
Fast Response ◽  
High Ionic Conductivity ◽  
Electrochromic Device ◽  
Fast Response Time ◽  
Coloration Efficiency ◽  
Conduction Pathway

MXene, a 2D material, is used as a filler to manufacture polymer electrolytes with high ionic conductivity because of its unique sheet shape, large specific surface area and high aspect ratio. Because MXene has numerous -OH groups on its surface, it can cause dehydration and condensation reactions with poly(4-styrenesulfonic acid) (PSSA) and consequently create pathways for the conduction of cations. The movement of Grotthuss-type hydrogen ions along the cation-conduction pathway is promoted and a high ionic conductivity can be obtained. In addition, when electrolytes composed of a conventional acid or metal salt alone is applied to an electrochromic device (ECD), it does not bring out fast response time, high coloration efficiency and transmittance contrast simultaneously. Therefore, dual-cation electrolytes are designed for high-performance ECDs. Bis(trifluoromethylsulfonyl)amine lithium salt (LiTFSI) was used as a source of lithium ions and PSSA crosslinked with MXene was used as a source of protons. Dual-Cation electrolytes crosslinked with MXene was applied to an indium tin oxide-free, all-solution-processable ECD. The effect of applying the electrolyte to the device was verified in terms of response time, coloration efficiency and transmittance contrast. The ECD with a size of 5 × 5 cm2 showed a high transmittance contrast of 66.7%, fast response time (8 s/15 s) and high coloration efficiency of 340.6 cm2/C.

scholarly journals A Separated Reset Waveform Design for Suppressing Oil Backflow in Active Matrix Electrowetting Displays

Micromachines ◽  
2021 ◽  
Vol 12 (5) ◽  
pp. 491
Author(s):  
Linwei Liu ◽  
Pengfei Bai ◽  
Zichuan Yi ◽  
Guofu Zhou
Keyword(s):  
Experimental Data ◽  
Dielectric Layer ◽  
Waveform Design ◽  
Second Phase ◽  
Active Matrix ◽  
Two Phases ◽  
Back Stage ◽  
A Charge ◽  
Electric Field Force ◽  
Driving Waveform

The electrowetting display (EWD) is a kind of reflective paper-like display. Flicker and grayscale distortion are caused by oil backflow, which is one of the important factors restricting the wide application of EWDs. The charge embedding caused by the electric field force in the dielectric layer is the cause of oil backflow. To suppress oil backflow, a separated reset waveform based on the study of oil movement is proposed in this paper. The driving waveform is divided into two parts: a reset waveform and a grayscale waveform. The reset waveform generated by a reset circuit can be used to output various voltages. The grayscale waveform is set as a traditional PWM waveform. The reset waveform is composed of a charge-releasing stage and oil-moving back stage. Two phases are contained in the charge releasing stage. The overdriving voltage is used during the first phase to reverse the voltage of all pixels. The trapped charges can then be released from the dielectric layer during the second phase. A higher voltage is used during the oil-moving back stage to drive the oil faster in the pixel. By comparing the experimental data, the oil backflow time is extended 761 times by the reset waveform. The four grayscales can be maintained by the reset waveform after driving for 300 s.

scholarly journals FEM Simulation of Frequency-Selective Surface Based on Thermoelectric Bi-Sb Thin Films for THz Detection

Photonics ◽  
2021 ◽  
Vol 8 (4) ◽  
pp. 119
Author(s):  
Anastasiia Tukmakova ◽  
Ivan Tkhorzhevskiy ◽  
Artyom Sedinin ◽  
Aleksei Asach ◽  
Anna Novotelnova ◽  
...  
Keyword(s):  
Thin Films ◽  
Response Times ◽  
Fem Simulation ◽  
Film Surface ◽  
Frequency Selective Surface ◽  
Fast Response ◽  
Radiation Absorption ◽  
Thz Radiation ◽  
Frequency Filter ◽  
Frequency Selective

Terahertz (THz) filters and detectors can find a wide application in such fields as: sensing, imaging, security systems, medicine, wireless connection, and detection of substances. Thermoelectric materials are promising basis for THz detectors’ development due to their sensitivity to the THz radiation, possibility to be heated under the THz radiation and produce voltage due to Seebeck effect. Thermoelectric thin films of Bi-Sb solid solutions are semimetals/semiconductors with the band gap comparable with THz energy and with high thermoelectric conversion efficiency at room temperature. Detecting film surface can be transformed into a periodic frequency selective surface (FSS) that can operate as a frequency filter and increases the absorption of THz radiation. We report for the first time about the simulation of THz detector based on thermoelectric Bi-Sb thin-filmed frequency-selective surface. We show that such structure can be both detector and frequency filter. Moreover, it was shown that FSS design increases not only a heating due to absorption but a temperature gradient in Bi-Sb film by two orders of magnitude in comparison with continuous films. Local temperature gradients can reach the values of the order of 100 K·mm−1. That opens new perspectives for thin-filmed thermoelectric detectors’ efficiency increase. Temperature difference formed due to THz radiation absorption can reach values on the order of 1 degree. Frequency-transient calculations show the power dependence of film temperature on time with characteristic saturation at times around several ms. That points to the perspective of reaching fast response times on such structures.

Sign in / Sign up

Export Citation Format

Share Document