On the Final Size of G.P. Zones in Al-Zn 10% Alloy During Isothermal Ageing

1974 ◽  
pp. 409-417
Author(s):  
S. Ceresara ◽  
A. Giarda
Keyword(s):  
Final Size ◽  
Isothermal Ageing

Microstructural Development in Nb-Ti Multifilamentary Superconductors During Processing

1985 ◽  
Vol 43 ◽  
pp. 190-191
Author(s):  
A. W. West
Keyword(s):  
Heat Treatment ◽  
Critical Current Density ◽  
Copper Matrix ◽  
Wire Drawing ◽  
Heat Treatments ◽  
Microstructural Development ◽  
Final Size ◽  
Density Values ◽  
The Wire ◽  
Multifilamentary Superconductors

The influence of the filament microstructure on the critical current density values, Jc, of Nb-Ti multifilamentary superconducting composites has been well documented. However the development of these microstructures during composite processing is still under investigation.During manufacture, the multifilamentary composite is given several heat treatments interspersed in the wire-drawing schedule. Typically, these heat treatments are for 5 to 80 hours at temperatures between 523 and 573K. A short heat treatment of approximately 3 hours at 573K is usually given to the wire at final size. Originally this heat treatment was given to soften the copper matrix, but recent work has shown that it can markedly change both the Jc value and microstructure of the composite.

THE MECHANISM OF FINAL SIZE CONTROL OF L10-FEPT NANOCRYSTALS

2016 ◽  
Vol 72 (9) ◽  
Author(s):  
Seyed Ali Sebt ◽  
Zahra Bamshad ◽  
Mohammad Reza Abolhassani
Keyword(s):  
Size Control ◽  
Final Size

scholarly journals Development of Quantum Dot (QD) Based Color Converters for Multicolor Display

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1089
Author(s):  
Muhammad T. Sajjad ◽  
Ashu K. Bansal ◽  
Francesco Antolini ◽  
Eduard Preis ◽  
Lenuta Stroea ◽  
...  
Keyword(s):  
Polymer Matrix ◽  
Cost Effective ◽  
Final Size ◽  
Force Microscopy ◽  
Morphological Studies ◽  
Color Displays ◽  
Transmission Electron ◽  
Different Temperatures ◽  
Color Conversion ◽  
Temperature Time

Many displays involve the use of color conversion layers. QDs are attractive candidates as color converters because of their easy processability, tuneable optical properties, high photoluminescence quantum yield, and good stability. Here, we show that emissive QDs with narrow emission range can be made in-situ in a polymer matrix, with properties useful for color conversion. This was achieved by blending the blue-emitting pyridine based polymer with a cadmium selenide precursor and baking their films at different temperatures. To achieve efficient color conversion, blend ratio and baking temperature/time were varied. We found that thermal decomposition of the precursor leads to highly emissive QDs whose final size and emission can be controlled using baking temperature/time. The formation of the QDs inside the polymer matrix was confirmed through morphological studies using atomic force microscopy (AFM) and transmission electron microscopy (TEM). Hence, our approach provides a cost-effective route to making highly emissive color converters for multi-color displays.

scholarly journals Transcriptome Analysis of Ginkgo biloba L. Leaves across Late Developmental Stages Based on RNA-Seq and Co-Expression Network

Forests ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 315
Author(s):  
Hailin Liu ◽  
Xin Han ◽  
Jue Ruan ◽  
Lian Xu ◽  
Bing He
Keyword(s):  
Ginkgo Biloba ◽  
Leaf Development ◽  
Developmental Stages ◽  
Leaf Growth ◽  
Rna Seq ◽  
Final Size ◽  
Dioecious Species ◽  
Related Factors ◽  
New Genes ◽  
Gene Modules

The final size of plant leaves is strictly controlled by environmental and genetic factors, which coordinate cell expansion and cell cycle activity in space and time; however, the regulatory mechanisms of leaf growth are still poorly understood. Ginkgo biloba is a dioecious species native to China with medicinally and phylogenetically important characteristics, and its fan-shaped leaves are unique in gymnosperms, while the mechanism of G. biloba leaf development remains unclear. In this study we studied the transcriptome of G. biloba leaves at three developmental stages using high-throughput RNA-seq technology. Approximately 4167 differentially expressed genes (DEGs) were obtained, and a total of 12,137 genes were structure optimized together with 732 new genes identified. More than 50 growth-related factors and gene modules were identified based on DEG and Weighted Gene Co-expression Network Analysis. These results could remarkably expand the existing transcriptome resources of G. biloba, and provide references for subsequent analysis of ginkgo leaf development.

scholarly journals Final size distribution of stochastic susceptible infected recovered (SIR) epidemic model

2021 ◽  
Author(s):  
Jane Lola Mahasmara ◽  
Respatiwulan ◽  
Yuliana Susanti
Keyword(s):  
Size Distribution ◽  
Epidemic Model ◽  
Sir Epidemic Model ◽  
Final Size ◽  
Sir Epidemic

scholarly journals The mathematics of multiple lockdowns

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Antonio Scala
Keyword(s):  
Beneficial Effect ◽  
Epidemic Model ◽  
Final Size ◽  
Optimal Response ◽  
Support Strategy ◽  
The Impact ◽  
New Strategies

AbstractWhile vaccination is the optimal response to an epidemic, recent events have obliged us to explore new strategies for containing worldwide epidemics, like lockdown strategies, where the contacts among the population are strongly reduced in order to slow down the propagation of the infection. By analyzing a classical epidemic model, we explore the impact of lockdown strategies on the evolution of an epidemic. We show that repeated lockdowns have a beneficial effect, reducing the final size of the infection, and that they represent a possible support strategy to vaccination policies.

scholarly journals Performance of Sn-3.0Ag-0.5Cu Composite Solder with Kaolin Geopolymer Ceramic Reinforcement on Microstructure and Mechanical Properties under Isothermal Ageing

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 776
Author(s):  
Nur Syahirah Mohamad Zaimi ◽  
Mohd Arif Anuar Mohd Salleh ◽  
Andrei Victor Sandu ◽  
Mohd Mustafa Al Bakri Abdullah ◽  
Norainiza Saud ◽  
...  
Keyword(s):  
Shear Strength ◽  
Composite Solder ◽  
Printed Circuit Board ◽  
Microwave Sintering ◽  
Copper Substrate ◽  
Bulk Diffusion ◽  
Circuit Board ◽  
Sac305 Solder ◽  
Lap Shear ◽  
Isothermal Ageing

This paper elucidates the effect of isothermal ageing at temperature of 85 °C, 125 °C and 150 °C for 100, 500 and 1000 h on Sn-3.0Ag-0.5Cu (SAC305) lead-free solder with the addition of 1 wt% kaolin geopolymer ceramic (KGC) reinforcement particles. SAC305-KGC composite solders were fabricated through powder metallurgy using a hybrid microwave sintering method and reflowed on copper substrate printed circuit board with an organic solderability preservative surface finish. The results revealed that, the addition of KGC was beneficial in improving the total thickness of interfacial intermetallic compound (IMC) layer. At higher isothermal ageing of 150 °C and 1000 h, the IMC layer in SAC305-KGC composite solder was towards a planar-type morphology. Moreover, the growth of total interfacial IMC layer and Cu3Sn layer during isothermal ageing was found to be controlled by bulk diffusion and grain-boundary process, respectively. The activation energy possessed by SAC305-KGC composite solder for total interfacial IMC layer and Cu3Sn IMC was 74 kJ/mol and 104 kJ/mol, respectively. Based on a lap shear test, the shear strength of SAC305-KGC composite solder exhibited higher shear strength than non-reinforced SAC305 solder. Meanwhile, the solder joints failure mode after shear testing was a combination of brittle and ductile modes at higher ageing temperature and time for SAC305-KGC composite solder.

The Utilisation of metabolic Water in Insects

1944 ◽  
Vol 35 (2) ◽  
pp. 127-139 ◽  
Author(s):  
G. Fraenkel ◽  
M. Blewett
Keyword(s):  
Body Weight ◽  
Water Content ◽  
Larval Development ◽  
Dry Weight ◽  
Larval Period ◽  
Tribolium Confusum ◽  
Ephestia Kuehniella ◽  
Final Size ◽  
Metabolic Water ◽  
Food Consumed

(1) Three insects,Tribolium confusum, Ephestia kuehniellaandDermestes vulpinus, have been grown at several humidities and the following factors have been determined: length of larval period; water content of food and of the freshly formed pupae; wet and dry weight of pupae and wet and dry weight of food consumed during larval development. The “net utilisation” of the food has been calculated as the ratio of dry weight of food eaten per larva to dry weight of pupa.(2) At lower humidities more food is eaten to produce a given unit of body weight. The length of the larval period increases and the weight of the pupae decreases.(3) More food is eaten at low humidities, because part of the food is utilised as water. As a consequence of this, the larva grows more slowly and its final size is smaller. It is shown forDermestesat 30 per cent. andEphestiaat 1 per cent. R.H. that less than 32·9 and 7·6 per cent. of the water in the pupae can be derived from water ingested with the food.

Effect of isothermal ageing on the microstructure, shear behaviour and hardness of the Sn58Bi/SnAgCuBiNi/Cu solder joints

2021 ◽  
pp. 1-9
Author(s):  
Jian Chang ◽  
Yang Liu ◽  
Hao Zhang ◽  
Min Zhou ◽  
Xue Yuxiong ◽  
...  
Keyword(s):  
Solder Joints ◽  
Shear Behaviour ◽  
Isothermal Ageing
Sign in / Sign up

Export Citation Format

Share Document