Study upon the Mechanical Properties of Most Used Dental Restoration Materials

2017 ◽  
pp. 345-350
Author(s):  
D. Cotoros ◽  
A. Stanciu ◽  
M. M. Scutariu
Keyword(s):  
Mechanical Properties ◽  
Dental Restoration

Crystal Phase Formation and Mechanical Properties of Lithium Disilicate Glass-Ceramics for Dental Restoration

2010 ◽  
Vol 177 ◽  
pp. 447-450 ◽  
Author(s):  
Xin Zhang ◽  
Yi Wen Hu ◽  
Yin Wu ◽  
Wen Jie Si
Keyword(s):  
Mechanical Properties ◽  
Phase Formation ◽  
Glass Ceramics ◽  
High Strength ◽  
Lithium Disilicate ◽  
Sem Analysis ◽  
Dental Restoration ◽  
Bending Test ◽  
Crystal Phase ◽  
High Temperature Xrd

The purpose of this study was to evaluate the crystal phase formation behavior and its influence on the mechanical properties of LiO2-SiO2-P2O5 glass-ceramics system. High temperature XRD was used to analyze the crystal phase formation in situ. The crystalline phases in the material both before and after heat-treatment were also analyzed. The flexural strength was measured by three-point bending test according to ISO 6872:2008(E). The SEM analysis showed that the high strength of the glass-ceramics is attributed to the continuous interlocking microstructure with fine lithium disilicate crystallines.

Characterization of NiCrMo Dental Restoration Alloy

2021 ◽  
Vol 875 ◽  
pp. 373-378
Author(s):  
Ali Haider ◽  
Omar Farooq Azam ◽  
Muhammad Talha ◽  
Saleem Akhtar
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Dental Materials ◽  
Dental Restoration ◽  
Restorative Material ◽  
Nicr Alloy ◽  
In Vitro Biocompatibility ◽  
Dental Prostheses ◽  
Materials Used

Restorative material is a class of dental materials used for direct filling and fabrication of indirect restoration. NiCr alloy is a restorative material frequently used for dental prostheses due to its properties and economic reasons. In present work beryllium free NiCrMo alloy was developed and studied for dental restoration application. The alloy have unique characteristics of resistance to oxidation and biocompatibility; the requisites for dental prostheses. NiCrMo alloy is found to possess mechanical strength and fabrication properties suitable for dental repairs. In this study the developed alloy was tested for its mechanical properties, biocompatibility and corrosion resistance. An in-vitro biocompatibility study was carried out. No signs of toxicity and no signs of cell growth inhibition, in presence of NiCrMo alloy specimen, were observed. Mechanical properties and corrosion resistance are found in the range that is suitable for dental prostheses and easy fabrication.

Forensic study of mechanical properties of dental restoration after burial in mangrove environment

2020 ◽  
Vol 308 ◽  
pp. 110166 ◽  
Author(s):  
Caroline Frota Brito de Almeida Salema ◽  
Paulo Goberlânio de Barros Silva ◽  
Patrícia Maria da Costa Oliveira ◽  
Juliana Paiva Marques Lima ◽  
Ricardo Henrique Alves da Silva ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Dental Restoration ◽  
Mangrove Environment

Matching Ability of Dental Shaded Zirconia Ceramics and Veneering Porcelain

2012 ◽  
Vol 512-515 ◽  
pp. 1751-1755
Author(s):  
Li Min Dong ◽  
Chen Wang ◽  
Ning Wen ◽  
Yuan Fu Yi ◽  
Qing Feng Zan ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Flexural Strength ◽  
Porcelain Body ◽  
Dental Restoration ◽  
Zirconia Ceramics ◽  
Posterior Teeth ◽  
Dental Crowns ◽  
Shock Resistance ◽  
Radial Cracks ◽  
Shade Guide

The matching properties of ceramics and veneering porcelain play an important role for the overall color and mechanical properties of dental crowns. The Vita VM9 veneering porcelain was coated on the surfaces of two zirconia, three-point flexural strength, heat shock resistance and the overall color after veneered with porcelain were tested. The results showed that the interlayer cracks, radial cracks or porcelain body cracks were not appeared in all samples during thermal shock experiments at 60~220°C. Their flexural strength was all above 700MPa and the overall color covered the common color of VITA-3D Master shade guide. There is good thermal compatibility between the two dental shaded zirconia ceramics and Vita VM9 veneering porcelain. The mechanical properties are suitable for clinical posterior teeth area restorative, and the overall color is also suitable for the requirements on the color and brightness of clinical dental restoration.

A Review of the Low-Temperature Degradation of Dental Zirconia

2014 ◽  
Vol 606 ◽  
pp. 85-88
Author(s):  
Mohamed M. Aboras ◽  
Kai Yuan Theng ◽  
Andanastuti Muchtar ◽  
Che Husna Azhari ◽  
Norziha Yahaya
Keyword(s):  
Mechanical Properties ◽  
Optical Properties ◽  
Low Temperature ◽  
Tetragonal Zirconia ◽  
Dental Restoration ◽  
Restorative Material ◽  
Dental Restorations ◽  
Biological Compatibility ◽  
Oral Environment ◽  
Dental Restorative

The use of tetragonal zirconia as a dental restorative material has recently increased because of its unique mechanical and optical properties, as well as high biological compatibility with the oral cavity environment. However, the mechanical properties of zirconia can be severely degraded, which leads to the failure of dental restorations. This review focuses on the low-temperature degradation of dental zirconia and its effects on the properties of zirconia and on the oral environment. The purpose is to show the importance of this negative phenomenon and suggest guidelines for minimizing the aging of zirconia that is used as a dental restoration material.

scholarly journals THE EFFECT OF Musa acuminata AND Ocimum basilicum MIXED EXTRACTS TO THE SURFACE HARDNESS OF BIOACTIVE COMPOSITE RESIN

2020 ◽  
Vol 5 (2) ◽  
pp. 172
Author(s):  
Dewi Puspitasari ◽  
Maharani Laillyza Apriasari ◽  
Dewi Rahayu ◽  
Priyawan Rachmadi
Keyword(s):  
Mechanical Properties ◽  
Composite Resin ◽  
Surface Hardness ◽  
Ocimum Basilicum ◽  
Musa Acuminata ◽  
Dental Restoration ◽  
Composite Resins ◽  
Mixed Solution ◽  
Leaf Extracts ◽  
Banana Stem

ABSTRACTBackgrounds: The use of mouthwash daily may influence the mechanical properties of bioactive composite resin as a dental restoration, one of the mechanical properties is surface hardness. Herbal mouthwash can be used to minimize the side effect of mouthwash that contain alcohol. Mauli banana stem and basil leaf extracts can be produced into herbal mouthwash. Methods: Thirty specimens (10mm diameter x 2mm thick; n=5/group) bioactive composite resins were immersed in a mixed solution of Mauli banana and basil leaf extracts with concentration of 25%, 50%, 75 %%, 100%, the control group of chlorhexidine gluconate 0.2% and aquadest for 7 days in 37oC. Measurement of the surface hardness was using the Vickers Microhardness Tester with 100 gf load for 15 seconds. Results: One Way ANOVA and Post Hoc Bonferroni exhibited the significant differences (p <0.05) in hardness values between the specimens that immersed in the mixed solution Mauli banana and Basil leaf extracts, which in the concentration of 100% (4,49 ± 4,61 VHN) compared with 25% (38,20 ± 2,58 VHN), 50% (41,40 ± 3,84 VHN) and 75% concentration (40,40 ± 3,55 VHN). There was no siginificant difference (p >0.05) between specimens immersed in CHX, aquadest and the mixed solution of mauli banana and basil leaf extracts in all concentration. Conclusion: There is no change in bioactive composite resin surface hardness after immersed in the mixed solution of Mauli Banana stem (Musa acuminata) and Basil leaf (Ocimum basilicum) extracts.Keywords: Basil leaf extract, Bioactive resin, Mauli Banana stem extract, Surface hardness

scholarly journals Polymerization characteristics of colored compomers cured with different LED units

2019 ◽  
Vol 17 (1) ◽  
pp. 228080001982780 ◽  
Author(s):  
Meltem Bakkal ◽  
Berza Yılmaz ◽  
Ali Durmus ◽  
Zehra Durmus ◽  
Serife Ozalp
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Dental Restoration ◽  
The Other ◽  
Microstructural Properties ◽  
Complex Interactions ◽  
Light Curing ◽  
Degree Of Curing ◽  
Light Absorbance ◽  
Scanning Electron

Aim: Incomplete polymerization of a resin material used for dental restoration affects the properties of the restoration. We evaluated the structural and mechanical properties of three different colored compomers cured with three different LED units to observe the characteristic changes occurring in different matches. Methods: Polytetrafluoroethylene molds (5 mm in diameter and 2 mm in thickness) were used to prepare disk-shaped sample specimens. Nine sample groups (each of five specimens) were prepared, three each of different compomer resin colors (gold, berry, and silver). Samples were cured using three different LED units (Optima, VALO, and Demi Ultra), according to the manufacturers’ instructions. Microstructural properties of samples were characterized by determining the degree of curing using Fourier-transform infrared spectroscopy and by analyzing sample morphology under a scanning electron microscope. The Vickers hardness, compressive strength, and elastic modulus of the samples were measured to investigate their mechanical properties. Results: The degrees of curing decreased in the order of silver > berry > gold for all curing units. Conversely, gold compomers exhibited poorer mechanical values than the berry and silver counterparts. The Optima 10 unit yielded slightly higher degrees of curing than the other devices, followed by Demi Ultra and VALO light-curing units, respectively. Conclusion: The resin color affected the structural and mechanical properties of the compomers, possibly as a result of the complex interactions and relationships between the irradiation light and resin material, such as light absorbance and reflectance; thus, depending on the color as well as the curing protocol.

Mechanical Properties of Ceramic/Polymer Blocks for CAD/CAM Dental Restoration

2017 ◽  
Vol 44 (2) ◽  
pp. 107-117 ◽  
Author(s):  
Seung-Won Ku ◽  
Jong-Hwan Park ◽  
Yeong-Mu Ko
Keyword(s):  
Mechanical Properties ◽  
Dental Restoration ◽  
Cad Cam

scholarly journals A Study of 3D-Printable Reinforced Composite Resin: PMMA Modified with Silver Nanoparticles Loaded Cellulose Nanocrystal

Materials ◽  
2018 ◽  
Vol 11 (12) ◽  
pp. 2444 ◽  
Author(s):  
Shenggui Chen ◽  
Junzhong Yang ◽  
Yong-Guang Jia ◽  
Bingheng Lu ◽  
Li Ren
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Silver Nanoparticles ◽  
Composite Resin ◽  
Antibacterial Activities ◽  
Dental Restoration ◽  
Composite Resins ◽  
Resin Matrix ◽  
Homogeneous Distribution ◽  
Reinforced Composite

With the rapid application of light-curing 3D printing technology, the demand for high-performance polymer resins is increasing. Existing light-curable resins often have drawbacks limiting their clinical applications. This study aims to develop a new type of polymethyl methacrylate (PMMA) composite resins with enhanced mechanical properties, high antibacterial activities and excellent biocompatibilities. A series of reinforced composite resins were prepared by mechanically mixing PMMA with modified cellulose nanocrystals (CNCs), which were coated with polydopamine and decorated by silver nanoparticles (AgNPs) via Tollen reaction. The morphology of CNCs-Ag was observed by transmission electron microscopy and the formation of AgNPs on CNCs was confirmed by X-Ray photoelectron spectroscopy analyses. Functional groups in PMMA-CNCs-Ag composites were verified by Fourier Transform infrared spectroscopy (FTIR) spectroscopy. The mechanical assessment and scanning electron microscopy analysis suggested that the evenly distributed CNCs-AgNPs composite effectively improve mechanical properties of PMMA resin. Cytotoxicity assay and antibacterial activity tests indicated excellent biocompatibility and high antibacterial activities. Furthermore, PMMA with CNCs-AgNPs of 0.1 wt.% (PMMA-CNCs-AgNPs-0.1) possessed the most desirable mechanical properties owing to the homogeneous distribution of AgNPs throughout the resin matrix. This specific composite resin can be used as a functional dental restoration material with potential of other medical applications.

Properties of Nanostructured 3Y-TZP Blocks Used for CAD/CAM Dental Restoration

2008 ◽  
Vol 396-398 ◽  
pp. 603-606 ◽  
Author(s):  
Claudinei dos Santos ◽  
Felipe Antunes Santos ◽  
Carlos Nelson Elias
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Weibull Modulus ◽  
Bending Strength ◽  
Dental Restoration ◽  
Tetragonal Zro2 ◽  
All Ceramic ◽  
Cad Cam ◽  
Ceramic Blocks ◽  
Xrd Patterns

Several CAD/CAM systems are available to dental prosthesis laboratories which can be used to fabricate all-ceramic copings and frameworks. The use of these systems presents low demand, due principally the high blocks ceramics cost used for theses systems. Usually, these ceramic blocks are sintered at high temperatures, between 1450 and 15500C, resulting in micrometric ZrO2 microstructure. A considerable innovation in these ceramics systems used in CAD/CAM applications was introduced by the use of nanometric-tetragonal ZrO2 blocks, which are sintered at low sintering temperatures resulting in nanometric grains morphology and improved mechanical properties. The purpose of the present work is to characterize the mechanical properties of nanoparticled zirconium oxide blocks comparing with commercial micrometric ceramic parts. XRD patterns showed that the blocks have only the tetragonal-ZrO2 as crystalline phase. The tetragonal-monoclinic transformation phase was responsible for the excellent mechanical properties. Nanometric blocks presented hardness of 13GPa, fracture toughness of 11MPam1/2 , bending strength of 1020MPa and Weibull modulus, m=14, while micrometric ZrO2 blocks similar hardness, fracture toughness 8.5MPam1/2, bending strength of 850MPa and Weibull modulus of 10.

Sign in / Sign up

Export Citation Format

Share Document