Effect of ultrasonic vibrations on the cooling capacity of quenching oil

1973 ◽  
Vol 15 (10) ◽  
pp. 877-878 ◽  
Author(s):  
V. G. Pogodin ◽  
N. P. Firsov ◽  
E. M. Kremlev
Keyword(s):  
Cooling Capacity ◽  
Ultrasonic Vibrations

Effect of ultrasonic vibrations on the cooling capacity of the quenching medium

1966 ◽  
Vol 8 (9) ◽  
pp. 692-693 ◽  
Author(s):  
V. N. Chachin ◽  
V. E. Eremin
Keyword(s):  
Cooling Capacity ◽  
Ultrasonic Vibrations ◽  
Quenching Medium

MODEL-BASED ANALYSIS OF EFFECTIVENESS OF ENGINEERING SOLUTIONS DESIGNED TO INCREASE COOLING CAPACITY OF TASHLYK WATER RESERVOIR OF SOUTHUKRAINIAN NUCLEAR POWER PLANT

2012 ◽  
Vol 13 (1-4) ◽  
pp. 39-51
Author(s):  
Roman V. Bezhenar ◽  
Volodymyr I. Koshebutsky ◽  
Ivan V. Kovalets ◽  
Vladimir S. Maderich ◽  
Mark J. Zheleznyak
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Nuclear Power ◽  
Water Reservoir ◽  
Cooling Capacity ◽  
Model Based ◽  
Model Based Analysis

Воздействиеультразвуковогополянадинамическуювязкостьводы

2019 ◽  
pp. 27-29
Author(s):  
P. Vikulin ◽  
K. Khlopov ◽  
M. Cherkashin
Keyword(s):  
Dynamic Viscosity ◽  
Experimental Studies ◽  
Ultrasonic Field ◽  
Maximum Effect ◽  
Ultrasonic Frequency ◽  
Ultrasonic Vibrations ◽  
Wastewater Disposal ◽  
Laboratory Setup ◽  
Sonic Treatment ◽  
The Impact

Enhancing water purification processes is provided by various methods including physical ones, in particular, exposure to ultrasonic vibrations. The change in the dynamic viscosity of water affects the rate of deposition of particles in the aquatic environment which can be used in natural and wastewater treatment. At the Department Water Supply and Wastewater Disposal of the National Research Moscow State University of Civil Engineering experimental studies were conducted under laboratory conditions to study the effect of ultrasound on the change in the dynamic viscosity of water. A laboratory setup has been designed consisting of an ultrasonic frequency generator of the relative intensity, a transducer (concentrator) that transmits ultrasonic vibrations to the source water, and sonic treatment tanks. Experimental studies on the impact of the ultrasonic field in the cavitation mode on the dynamic viscosity of the aqueous medium were carried out the exposure time was obtained to achieve the maximum effect.Интенсификация процессов очистки воды осуществляется с помощью различных методов, в том числе и физических, в частности воздействием ультразвуковых колебаний. Изменение динамической вязкости воды влияет на скорость осаждения частиц в водной среде, что может быть использовано в процессах очистки природных и сточных вод. На кафедре Водоснабжение и водоотведение Национального исследовательского Московского государственного строительного университета в лабораторных условиях проведены экспериментальные исследования по изучению влияния ультразвука на изменение динамической вязкости воды. Разработана схема лабораторной установки, состоящая из генератора ультразвуковых частот с соответствующей интенсивностью, преобразователя (концентратора), передающего ультразвуковые колебания в исходную воду, и емкости для озвучивания. Выполнены экспериментальные исследования по влиянию ультразвукового поля в режиме кавитации на динамическую вязкость водной среды, получено время экспозиции для достижения максимального эффекта.

Use of ultrasonic surface hardening in modifi cation of surface layer

2020 ◽  
pp. 200-204
Author(s):  
Yu.S. Semenova ◽  
A.G. Samul’ ◽  
S.V. Mazhuga
Keyword(s):  
Surface Layer ◽  
Chemical Treatment ◽  
Surface Hardening ◽  
Manufacturing Cost ◽  
Ultrasonic Vibrations ◽  
Surface Microrelief ◽  
Scientific Schools ◽  
Structure Changes ◽  
Wide Range ◽  
Finishing Machining

Overview of the research results got by various scientific schools in the field of application of ultrasonic surface hardening is provided. Wide range of opportunities of ultrasonic surface hardening is shown for the application in the preliminary machining of surfaces before thermal and chemical treatment, coating, and also as finishing machining. The effect of the energy of ultrasonic vibrations on structure changes in the material of the surface layer and on surface microrelief on parts performance is considered. The prospects of using of the ultrasonic surface hardening method in combination with other methods of the material modification are presented. In addition the possibilities of reducing the manufacturing cost of product by introducing ultrasonic surface hardening into the technological process are shown.

A simplified method of temperature control maximizing productivity of the batch reactor; The effect of inertia of the cooling system

1982 ◽  
Vol 47 (2) ◽  
pp. 454-464 ◽  
Author(s):  
František Jiráček ◽  
Josef Horák
Keyword(s):  
Mathematical Model ◽  
Temperature Control ◽  
Cooling System ◽  
Batch Reactor ◽  
Exothermic Reaction ◽  
Cooling Capacity ◽  
Variable Activity ◽  
Simplified Method ◽  
Opening And Closing ◽  
Time Of Operation

The effect has been studied of the inertia of the cooling system on the reliability of control of the temperature of the reaction mixture. The study has been made using a mathematical model of the batch reactor with an exothermic reaction. The temperature has been controlled by a two-level controller opening and closing the flow of the coolant. The aim of the control has been to maintain a constant value of the degree of utilization of the cooling capacity of the reactor. The instantaneous value of the degree of utilization has been assessed from the ratio of times for which the cooling system is idle to the time of operation. The reliability of control has been studied for variable activity of the catalyst.

scholarly journals Evaporative Cooling Options for Building Air-Conditioning: A Comprehensive Study for Climatic Conditions of Multan (Pakistan)

Energies ◽  
2020 ◽  
Vol 13 (12) ◽  
pp. 3061 ◽  
Author(s):  
Shazia Noor ◽  
Hadeed Ashraf ◽  
Muhammad Sultan ◽  
Zahid Mahmood Khan
Keyword(s):  
Thermal Comfort ◽  
Co2 Emissions ◽  
Air Conditioning ◽  
Evaporative Cooling ◽  
Cooling Capacity ◽  
Climatic Conditions ◽  
Maximum Temperature ◽  
Human Thermal Comfort ◽  
Work Input ◽  
System Configurations

This study provides comprehensive details of evaporative cooling options for building air-conditioning (AC) in Multan (Pakistan). Standalone evaporative cooling and standalone vapor compression AC (VCAC) systems are commonly used in Pakistan. Therefore, seven AC system configurations comprising of direct evaporative cooling (DEC), indirect evaporative cooling (IEC), VCAC, and their possible combinations, are explored for the climatic conditions of Multan. The study aims to explore the optimum AC system configuration for the building AC from the viewpoints of cooling capacity, system performance, energy consumption, and CO2 emissions. A simulation model was designed in DesignBuilder and simulated using EnergyPlus in order to optimize the applicability of the proposed systems. The standalone VCAC and hybrid IEC-VCAC & IEC-DEC-VCAC system configurations could achieve the desired human thermal comfort. The standalone DEC resulted in a maximum COP of 4.5, whereas, it was 2.1 in case of the hybrid IEC-DEC-VCAC system. The hybrid IEC-DEC-VCAC system achieved maximum temperature gradient (21 °C) and relatively less CO2 emissions as compared to standalone VCAC. In addition, it provided maximum cooling capacity (184 kW for work input of 100 kW), which is 85% higher than the standalone DEC system. Furthermore, it achieved neutral to slightly cool human thermal comfort i.e., 0 to −1 predicted mean vote and 30% of predicted percentage dissatisfied. Thus, the study concludes the hybrid IEC-DEC-VCAC as an optimum configuration for building AC in Multan.

scholarly journals Comparison of Industrial Quenching Oils

Metals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 250
Author(s):  
Jiří Hájek ◽  
Zaneta Dlouha ◽  
Vojtěch Průcha
Keyword(s):  
State Of The Art ◽  
Cooling Capacity ◽  
Steel Grade ◽  
Cooling Curves ◽  
Cooling Process ◽  
Industrial Practice ◽  
Product Size ◽  
Cct Curve ◽  
Hardening Power ◽  
The Impact

This article is a response to the state of the art in monitoring the cooling capacity of quenching oils in industrial practice. Very often, a hardening shop requires a report with data on the cooling process for a particular quenching oil. However, the interpretation of the data can be rather difficult. The main goal of our work was to compare various criteria used for evaluating quenching oils. Those of which prove essential for operation in tempering plants would then be introduced into practice. Furthermore, the article describes monitoring the changes in the properties of a quenching oil used in a hardening shop, the effects of quenching oil temperature on its cooling capacity and the impact of the water content on certain cooling parameters of selected oils. Cooling curves were measured (including cooling rates and the time to reach relevant temperatures) according to ISO 9950. The hardening power of the oil and the area below the cooling rate curve as a function of temperature (amount of heat removed in the nose region of the Continuous cooling transformation - CCT curve) were calculated. V-values based on the work of Tamura, reflecting the steel type and its CCT curve, were calculated as well. All the data were compared against the hardness and microstructure on a section through a cylinder made of EN C35 steel cooled in the particular oil. Based on the results, criteria are recommended for assessing the suitability of a quenching oil for a specific steel grade and product size. The quenching oils used in the experiment were Houghto Quench C120, Paramo TK 22, Paramo TK 46, CS Noro MO 46 and Durixol W72.

scholarly journals Evaporator Optimization of Refrigerator Systems Using Quality Analysis

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 555
Author(s):  
Sangkyung Na ◽  
Sanghun Song ◽  
Seunghyuk Lee ◽  
Jehwan Lee ◽  
Hyun Kim ◽  
...  
Keyword(s):  
Power Consumption ◽  
Operating Time ◽  
Cooling Capacity ◽  
Operating Conditions ◽  
Quality Analysis ◽  
Lubricating Oil ◽  
Optimal Operating ◽  
Compressor Piston ◽  
Refrigerator Temperature ◽  
Visualization Experiments

In this study, evaporator optimization, via both experimental and simulation methods was conducted. To evaluate the evaporator performance, under the optimal system, the compressor operating time and the effects of oil on the refrigerator system were studied. If the temperature of the refrigerator chamber reaches the setting value, the compressor stops working and it leads to the temperature of the refrigerator chamber slowly increasing, due to the heat transfer to the ambient. When the refrigerator temperature is out of the setting range, the compressor works again, and the refrigerator repeats this process until the end of its life. These on/off period can be controlled through the compressor piston movement. To determine the optimal compressor operating conditions, experiments of monthly power consumption were conducted under various compressor working times and the lowest power consumption conditions was determined when the compressor worked continuously. Lubricating oil, the refrigerator system, using oil, also influenced the system performance. To evaluate the effect of oil, oil eliminated and oil systems were compared based on cooling capacity and power consumption. The cooling capacity of the oil eliminated system was 2.6% higher and the power consumption was 3.6% lower than that of the oil system. After determining the optimal operating conditions of the refrigerator system, visualization experiments and simulations were conducted to decide the optimal evaporator and the conventional evaporator size can be reduced by approximately 2.9%.

scholarly journals Developing a Cold Accumulator with a Capsule Bed Containing Water as a Phase-Change Material

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2703
Author(s):  
Robert Sekret ◽  
Przemysław Starzec
Keyword(s):  
Energy Efficiency ◽  
Heat Pump ◽  
Cold Storage ◽  
Cooling Capacity ◽  
Cooling Power ◽  
Storage Process ◽  
Water Ice ◽  
Measurement Results ◽  
Mathematical Relationships ◽  
Change Material

The paper presents the investigation of a prototype cold accumulator using water–ice latent heat for the cold storage process. The concept of the cold accumulator was based on a 200-L-capacity cylindrical storage tank in which spherical capsules filled with water were placed. Beds of polypropylene capsules with diameters of 80 mm, 70 mm, and 60 mm were used in the tests. The cold accumulator operated with a water–air heat pump. Based on the test results, the following parameters were calculated: the cooling capacity, cooling power, energy efficiency of the cold storage, and energy efficiency ratio (EER) of the accumulator. The obtained measurement results were described with mathematical relationships (allowing for measurement error) using criterial numbers and the developed “Research Stand Factor Number” (RSFN) index. It has been found that, for the prototype cold accumulator under investigation, the maximum values of the cooling capacity (17 kWh or 85.3 kWh per cubic meter of the accumulator), energy efficiency (0.99), and EER (4.8) occur for an RSFN of 144·10−4. The optimal conditions for the operation of the prototype cold accumulator were the closest to laboratory tests conducted for a bed with capsules with a diameter of 70 mm and a mass flow of the water–glycol mixture flowing between the accumulator and the heat pump of 0.084 kg/s. During the tests, no significant problems with the operation of the prototype cold accumulator were found.

Sign in / Sign up

Export Citation Format

Share Document