scholarly journals Pd Nanoparticles Stabilized on the Cross-Linked Melamine-Based SBA-15 as a Catalyst for the Mizoroki–Heck Reaction

2021 ◽  
Author(s):  
Ayat Nuri ◽  
Abolfazl Bezaatpour ◽  
Mandana Amiri ◽  
Nemanja Vucetic ◽  
Jyri-Pekka Mikkola ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Inductively Coupled Plasma ◽  
High Surface ◽  
High Surface Area ◽  
Coupling Reaction ◽  
Pd Nanoparticles ◽  
Significant Activity ◽  
Inductively Coupled ◽  
Transmission Electron ◽  
Ft Ir

AbstractMesoporous SBA-15 silicate with a high surface area was prepared by a hydrothermal method, successively modified by organic melamine ligands and then used for deposition of Pd nanoparticles onto it. The synthesized materials were characterized with infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), nitrogen physisorption, scanning electron microscopy (SEM) coupled with energy dispersive X-ray analysis (EDX), transmission electron microscopy (TEM), nuclear magnetic resonance (NMR) and inductively coupled plasma (ICP-OES). The catalyst was effectively used in the Mizoroki–Heck coupling reaction of various reactants in the presence of an organic base giving the desired products in a short reaction time and with small catalysts loadings. The reaction parameters such as the base type, amounts of catalyst, solvents, and the temperature were optimized. The catalyst was easily recovered and reused at least seven times without significant activity losses. Graphic Abstract

Synthesis and Characterization of PVP/Eu4/3L(phen)•2H2O Luminescent Complex

2011 ◽  
Vol 121-126 ◽  
pp. 1500-1503
Author(s):  
Hui Juan Ren ◽  
Hua Yang ◽  
De Hui Sun ◽  
Zhen Feng Cui ◽  
Guang Yan Hong
Keyword(s):  
Electron Microscopy ◽  
Inductively Coupled Plasma ◽  
Atomic Emission ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
Pyromellitic Acid ◽  
Inductively Coupled ◽  
Transmission Electron ◽  
Ft Ir

Rare earth europium (Eu(III))-pyromellitic acid (H4L)-1,10-phenanthroline (phen) ternary luminescent complex has been synthesized in polyvinylpyrrolidone (PVP) matrix by precipitation method. The chemical constitution of the complex has been demonstrated as PVP/EuL4/3L(phen)•2H2O by a combination of elemental analysis, inductively coupled plasma-atomic emission spectroscopy (ICP-AES) and Fourier-transform infrared spectroscopy (FT-IR). X-ray diffraction analysis (XRD) has shown that the complex is a new kind of crystal whose structure is totally different from two ligands. The morphology of the complex has been investigated by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results have shown that the complex has a rodlike crystal structure and the diameter of the rod is about 400 nm. Thermogravimetric analysis (TG) has indicated that the luminescent complex is thermally stable below 300 °C. Photoluminescence spectra (PL) have revealed that the complex can emit Eu3+ characteristic red fluorescence under ultraviolet excitation.

Magnetic Fe3O4@C nanoparticles as adsorbents for removal of amoxicillin from aqueous solution

2013 ◽  
Vol 69 (1) ◽  
pp. 147-155 ◽  
Author(s):  
Babak Kakavandi ◽  
Ali Esrafili ◽  
Anoushiravan Mohseni-Bandpi ◽  
Ahmad Jonidi Jafari ◽  
Roshanak Rezaei Kalantary
Keyword(s):  
Electron Microscopy ◽  
Activated Carbon ◽  
Kinetic Models ◽  
High Surface ◽  
High Surface Area ◽  
Order Kinetic ◽  
Magnetic Composites ◽  
Factors Affecting ◽  
Transmission Electron ◽  
Pseudo Second Order

In the present study, powder activated carbon (PAC) combined with Fe3O4 magnetite nanoparticles (MNPs) were used for the preparation of magnetic composites (MNPs-PAC), which was used as an adsorbent for amoxicillin (AMX) removal. The properties of magnetic activated carbon were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Brunaeur, Emmett and Teller and vibrating sample magnetometer. The operational factors affecting adsorption such as pH, contact time, adsorbent dosage, initial AMX concentration and temperature were studied in detail. The high surface area and saturation magnetization for the synthesized adsorbent were found to be 671.2 m2/g and 6.94 emu/g, respectively. The equilibrium time of the adsorption process was 90 min. Studies of adsorption equilibrium and kinetic models revealed that the adsorption of AMX onto MNPs-PAC followed Freundlich and Langmuir isotherms and pseudo-second-order kinetic models. The calculated values of the thermodynamic parameters, such as ΔG°, ΔH° and ΔS° demonstrated that the AMX adsorption was endothermic and spontaneous in nature. It could be concluded that MNPs-PAC have a great potential for antibiotic removal from aquatic media.

Enhanced Specific Heat of Silica Nanofluid

2010 ◽  
Vol 133 (2) ◽  
Author(s):  
Donghyun Shin ◽  
Debjyoti Banerjee
Keyword(s):  
Electron Microscopy ◽  
Specific Heat ◽  
Unit Volume ◽  
High Surface ◽  
High Surface Area ◽  
Lithium Carbonate ◽  
Sem Image ◽  
Surface Energies ◽  
Transmission Electron ◽  
The Stability

Silica nanoparticles (1% by weight) were dispersed in a eutectic of lithium carbonate and potassium carbonate (62:38 ratio) to obtain high temperature nanofluids. A differential scanning calorimeter instrument was used to measure the specific heat of the neat molten salt eutectic and after addition of nanoparticles. The specific heat of the nanofluid was enhanced by 19–24%. The measurement uncertainty for the specific heat values in the experiments is estimated to be in the range of 1–5%. These experimental data contradict earlier experimental results reported in the literature. (Notably, the stability of the nanofluid samples was not verified in these studies.) In the present study, the dispersion and stability of the nanoparticles were confirmed by using scanning electron microscopy (SEM). Percolation networks were observed in the SEM image of the nanofluid. Furthermore, no agglomeration of the nanoparticles was observed, as confirmed by transmission electron microscopy. The observed enhancements are suggested to be due to the high specific surface energies that are associated with the high surface area of the nanoparticles per unit volume (or per unit mass).

scholarly journals Synthesis and Characterization of Hierarchical Porousα-FeOOH for the Adsorption and Photodegradation of Rhodamine B

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Jianliang Cao ◽  
Gaojie Li ◽  
Yan Wang ◽  
Guang Sun ◽  
Hari Bala ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Rhodamine B ◽  
Uv Light ◽  
Low Cost ◽  
High Surface ◽  
High Surface Area ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Hierarchical Porous ◽  
Templated Method

Hierarchical porousα-FeOOH nanoparticles were controlled and prepared via a facile polystyrene (PS) microspheres-templated method. Theα-Fe2O3was obtained by the calcination of the as-preparedα-FeOOH. The resulting nanoparticles were characterized by X-ray diffraction analysis (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and N2-sorption techniques. The adsorption and photodegradation of Rhodamine B performance were evaluated under UV light at room temperature. The results indicated that the photocatalytic activity of theα-FeOOH nanoparticles is superior toα-Fe2O3-200 andα-Fe2O3-300 due to the hierarchically multiporous structure and high surface area. This convenient and low-cost process provides a rational synthesis alternative for the preparation of multiporous materials and the as-synthesis products have great foreground applications in many aspects.

scholarly journals Towards Reconfigurable Electronics: Silicidation of Top-Down Fabricated Silicon Nanowires

2019 ◽  
Vol 9 (17) ◽  
pp. 3462 ◽  
Author(s):  
Muhammad Bilal Khan ◽  
Dipjyoti Deb ◽  
Jochen Kerbusch ◽  
Florian Fuchs ◽  
Markus Löffler ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Silicon Nanowires ◽  
Inductively Coupled Plasma ◽  
Density Functional ◽  
Field Effect Transistors ◽  
Density Functional Theory Calculations ◽  
Silicide Phase ◽  
Top Down ◽  
Inductively Coupled ◽  
Transmission Electron

We present results of our investigations on nickel silicidation of top-down fabricated silicon nanowires (SiNWs). Control over the silicidation process is important for the application of SiNWs in reconfigurable field-effect transistors. Silicidation is performed using a rapid thermal annealing process on the SiNWs fabricated by electron beam lithography and inductively-coupled plasma etching. The effects of variations in crystallographic orientations of SiNWs and different NW designs on the silicidation process are studied. Scanning electron microscopy and transmission electron microscopy are performed to study Ni diffusion, silicide phases, and silicide–silicon interfaces. Control over the silicide phase is achieved together with atomically sharp silicide–silicon interfaces. We find that {111} interfaces are predominantly formed, which are energetically most favorable according to density functional theory calculations. However, control over the silicide length remains a challenge.

Ni-doped, urchin-like Bi2S3 particles for electrocatalytic oxidation of glucose

2021 ◽  
pp. 2150006
Author(s):  
Biao Wang ◽  
Ya Liu ◽  
Xu Huai ◽  
Yuqing Miao
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Electrocatalytic Oxidation ◽  
High Surface ◽  
High Surface Area ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Capacitance Current ◽  
Oxidation Of Glucose

In order to develop non-noble metal-based electrocatalysts for glucose oxidation, the Ni-doped, urchin-like Bi2S3 particles were prepared by a solvothermal method using the solvent of ethylene glycol/H2O. The obtained products were characterized by scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy and X-ray diffraction. The background signal from capacitance current is relatively low and the electrocatalytic oxidation current of glucose relatively high due to the urchin-like nanostructure of Bi2S3 particles and high surface area where the presence of Bi also improves the electrocatalytic performance of NiII/NiIII shift.

Preparation and Characterization of Nickel(Ni)-Silver(Ag) Core-Shell Nanoparticles for Conductive Pastes

2012 ◽  
Vol 531 ◽  
pp. 211-214 ◽  
Author(s):  
Jun Jie Jing ◽  
Ji Min Xie ◽  
Hui Ru Qin ◽  
Wen Hua Li ◽  
Ming Mei Zhang
Keyword(s):  
Electron Microscopy ◽  
Inductively Coupled Plasma ◽  
Water Solution ◽  
Average Diameter ◽  
Core Shell ◽  
Ni Nanoparticles ◽  
Shell Nanoparticles ◽  
Inductively Coupled ◽  
Transmission Electron ◽  
Core Shell Nanoparticles

Nickel(Ni)-silver(Ag) core-shell nanoparticles with different shell thickness were synthesized with Ni nanoparticles by liquid phase reduction technique form water solution. The product was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and inductively coupled plasma spectroscopy (ICP). The results showed that the Ni nanoparticles are in sphere shape and the average diameter is 104nm , the nickel(Ni)-silver(Ag) core-shell nanoparticles has good crystallinity and the thinkness of Ag nanoshells could be effectively controlled by changing the concentration of silver nitrate. The product can be used for nickel-based conductive paste preparation because of the surface character of Ag and the magnetic property of Ni

scholarly journals Electrical Conductivity Based Ammonia Sensing Properties of Polypyrrole/MoS2 Nanocomposite

Polymers ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 3047
Author(s):  
Sharique Ahmad ◽  
Imran Khan ◽  
Ahmad Husain ◽  
Anish Khan ◽  
Abdullah M. Asiri
Keyword(s):  
Electron Microscopy ◽  
Electrical Conductivity ◽  
Active Sites ◽  
High Surface ◽  
High Surface Area ◽  
High Sensitivity ◽  
Ambient Air ◽  
Sensing Properties ◽  
Ammonia Sensing ◽  
Transmission Electron

Polypyrrole (PPy) and Polypyrrole/MoS2 (PPy/MoS2) nanocomposites were successfully prepared, characterized and studied for ammonia sensing properties. The as-prepared PPy and PPy/MoS2 nanocomposites were confirmed by FTIR (Fourier transform infrared spectroscopy), XRD (X-ray diffraction), SEM (scanning electron microscopy) and TEM (transmission electron microscopy) techniques. The ammonia sensing properties of PPy and PPy/MoS2 nanocomposites were studied in terms of change in DC electrical conductivity on exposure to ammonia vapors followed by ambient air at room temperature. It was observed that the incorporation of MoS2 in PPy showed high sensitivity, significant stability and excellent reversibility. The enhanced sensing properties of PPy/MoS2 nanocomposites could be attributed to comparatively high surface area, appropriate sensing channels and efficiently available active sites. The sensing mechanism is explained on the basis of simple acid-base chemistry of polypyrrole.

Sign in / Sign up

Export Citation Format

Share Document