Metrological Aspects of Measuring the Volume-Average Temperature of Filaments in Illuminating Lamps

2019 ◽  
Vol 62 (4) ◽  
pp. 358-364
Author(s):  
Yu. A. Zakharov ◽  
S. S. Gots ◽  
R. Z. Bakhtizin
2020 ◽  
Vol 14 (3) ◽  
Author(s):  
Y Verkhivker ◽  
E. Altman ◽  
A. Palamarchuk ◽  
N. Kushnyrenko ◽  
S. Patyukov

The purpose of this research was to study the modes of  heating different types of plant raw materials in model technological environments that imitate the blanching of raw materials under factory conditions. The research aimed at expanding the range of canned products made from fruit and vegetables. To this end, new methods were searched for, in addition to the existing ones, allowing heating various plant raw materials and increasing the energy efficiency of canned fruit and vegetables production. Saturated water steam was selected as the treatment medium. The experimental studies included determining the volume-average  temperature of the fruit layer in the container. A pulse method of supplying the heating media has also been investigated. It allows using the inertial properties of raw materials and significantly reducing the expenditure of the heating media.  The objects selected for study were various species of pomes and drupes, in particular, apples, plums, cherries, sweet cherries, as well as a vegetable crop of the gourd family, or Cucurbitaceae. The following characteristics have been studied: the dynamics of heating individual fruit and vegetables in the saturated water steam environment at atmospheric pressure; the dependence of the heating and cooling rates of individual fruit and vegetables on the geometric index; the dependence of the heating rate of individual fruit and vegetables on the value of the characteristic dimension; the dependences of changes in the volume-average temperature of the fruit layer on the duration of treatment with saturated water steam. It has been established that the volume-average temperature in the centre of a fruit is also influenced by the shape of the fruit itself. To characterise the anomalous shapes of plant raw materials, the geometric index G has been calculated. This index characterises the elliptical shape of a fruit, and allows determining parameters in two mutually perpendicular planes. Also, to compare fruit of the elliptical and the spherical shapes, a special concept of characteristic dimension was used, which is applicable to fruit of different shapes. The experimental data on the change in the dependences of the heating and cooling rates of individual elliptical fruit have been analysed. The analysis has shown that the size of a fruit significantly affects the volume-average temperature in the fruit layer. It has been suggested to use pulsed heating of the fruit layer with saturated  water steam, which will appreciably increase the energy efficiency of production due to a significant reduction in heating media consumption


2013 ◽  
Vol 25 (1-2) ◽  
pp. 136-148
Author(s):  
I. V. Gryb

The concept of an explosion in freshwater ecosystems as a result of the release of accumulated energy, accompanied by the destruction of the steady climax successions of hydrocenoses is presented. The typification of local explosions as well as methods for assessing their risk during the development of river basins are shown. The change in atmospheric circulation, impaired phases of the hydrological regime of rivers, increasing the average temperature of the planet, including in Polesie to 0,6 ºC, deforestation leads to concentration and release of huge amounts of unmanaged terrestrial energy, which manifests itself in the form of disasters and emergencies. Hydroecological explosion is formed as a result of multifactorial external influence (natural and anthropogenic) on the water body in a certain period of time. Moreover, its level at wastewater discharge depends on the mass of recycled impurities and behaved processing capacity of the reservoir, and the mass of dumped on biocides and the possibility of the water flow to their dilution and to the utilization of non-toxic concentrations. In all these cases the preservation of "centers of life" in the tributaries of the first order – local fish reproduction areas contributed to ecosystem recovery, and the entire ecosystem has evolved from equilibrium to non-equilibrium with further restructuring after the explosion and environmental transition to a new trophic level. It means that hydroecological explosion can be researched as the logical course of development of living matter in abiotic environmental conditions, ending abruptly with the formation of new species composition cenoses and new bio-productivity. The buffer capacity of the water environment is reduced due to re-development and anthropic transformation of geobiocenoses of river basins, which leads to a weakening of life resistance. This applies particularly to the southern industrial regions of Ukraine, located in the arid zone that is even more relevant in the context of increased average temperature due to the greenhouse effect, as well as to Polesie (Western, Central and Chernihiv), had been exposed to large-scale drainage of 60-80th years, which contributed to the degradation of peatlands and fitostroma. Imposing the western trace of emissions from the Chernobyl accident to these areas had created the conditions of prolonged hydroecological explosion in an intense process of aging water bodies, especially lakes, change in species composition of fish fauna and the occurrence of neoplasms at the organismal level. Under these conditions, for the existence of man and the environment the vitaukta should be strengthened, i.e. buffer resistance and capacitance the aquatic environment, bioefficiency on the one hand and balanced using the energy deposited - on the other. This will restore the functioning of ecosystems "channel-floodplain", "riverbed-lake", reducing the energy load on the aquatic environment. Hydroecological explosions of natural origin can not be considered a pathology – it is a jump process of natural selection of species of biota. Another thing, if they are of anthropogenic origin and if the magnitude of such an impact is on the power of geological factors. Hydroecological explosions can be regarded as a manifestation of environmental wars that consciously or unconsciously, human society is waging against themselves and their kind in the river basins, so prevention of entropy increase in the aquatic environment and the prevention of hydroecological explosions is a matter of human survival. While the man - is not the final link in the development of living matter, it can develop without him, as matter is eternal, and the forms of its existence are different.


2020 ◽  
Author(s):  
Bryan J Pesta ◽  
John Fuerst ◽  
Emil O. W. Kirkegaard

Using a sample of ~3,100 U.S. counties, we tested geoclimatic explanations for why cognitive ability varies across geography. These models posit that geoclimatic factors will strongly predict cognitive ability across geography, even when a variety of common controls appear in the regression equations. Our results generally do not support UV radiation (UVR) based or other geoclimatic models. Specifically, although UVR alone predicted cognitive ability at the U.S. county-level (β = -.33), its validity was markedly reduced in the presence of climatic and demographic covariates (β = -.16), and was reduced even further with a spatial lag (β = -.10). For climate models, average temperature remained a significant predictor in the regression equation containing a spatial lag (β = .35). However, the effect was in the wrong direction relative to typical cold weather hypotheses. Moreover, when we ran the analyses separately by race/ethnicity, no consistent pattern appeared in the models containing the spatial lag. Analyses of gap sizes across counties were also generally inconsistent with predictions from the UVR model. Instead, results seemed to provide support for compositional models.


HortScience ◽  
1998 ◽  
Vol 33 (3) ◽  
pp. 509a-509
Author(s):  
C.E. Wieland ◽  
J.E. Barrett ◽  
D.G. Clark ◽  
G. J. Wilfret

Four poinsettia cultivars were grown in glass greenhouses in Gainesville, Fla., in the Fall 1997 to evaluate differences in floral initiation and subsequent development. Three means of regulating photoperiod were 1) natural days 2) long-day lighting to 6 Oct. and then natural days (lights out) 3) long-day lighting to 6 Oct., and then short-day conditions by black cloth for 15 h (black cloth). At 2-day intervals, sample meristems were collected and examined for initiation of reproductive development. Average minimum and maximum temperatures during the first two weeks of October were 22 and 29 °C, respectively, with an average temperature of 25.3 °C. The overall average temperature was 23.2 °C from planting to anthesis. Differences in anthesis dates among cultivars were primarily due to time to initiation vs. rate of development. Under natural days, `Lilo' initiated first on 8 Oct. and `Freedom', `Peterstar', and `Success', followed by 6, 8, and 18 days, respectively. Lights out resulted in `Lilo' initiating 17 Oct., followed by `Freedom', `Peterstar', and `Success' initiating 7, 12, and 15 days later, respectively. Differences between cultivars in time of initiation was reduced under black cloth, where `Lilo' initiated 14 Oct., followed by `Freedom' 2 days later, and `Peterstar' and `Success' 7 days afterward. Initiation was positively correlated to visible bud and anthesis. First color was positively correlated to initiation and visible bud, with the exception of `Lilo'. Growth room studies conducted using various high temperatures and photoperiods indicated similar trends.


Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 713
Author(s):  
Yanyan Peng ◽  
Qunchao Lin ◽  
Manchao He ◽  
Chun Zhu ◽  
Haijiang Zhang ◽  
...  

In rock engineering, it is of great significance to study the failure mechanical behavior of rocks with holes. Using a combination of experiment and infrared detection, the strength, deformation, and infrared temperature evolution behavior of marble with elliptical holes under uniaxial compression were studied. The test results showed that as the vertical axis b of the ellipse increased, the peak intensity first decreased and then increased, and the minimum value appeared when the horizontal axis was equal to the vertical axis. The detection results of the infrared thermal imager showed that the maximum temperature, minimum temperature, and average temperature of the observation area in the loading stage showed a downward trend, and the range of change was between 0.02 °C and 1 °C. It was mainly due to the accumulation of energy in the loading process of the rock sample that caused the surface temperature of the specimen to decrease. In the brittle failure stage, macroscopic cracks appeared on the surface of the rock sample, which caused the energy accumulated inside to dissipate, thereby increasing the maximum temperature and average temperature of the rock sample. The average temperature increase was about 0.05 °C to about 0.19 °C. The evolution of infrared temperature was consistent with the mechanical characteristics of rock sample failure, indicating that infrared thermal imaging technology can provide effective monitoring for the study of rock mechanics. The research in this paper provides new ideas for further research on the basic characteristics of rock failure under uniaxial compression.


Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2217
Author(s):  
Daniela Șova ◽  
Mariana Domnica Stanciu ◽  
Sergiu Valeriu Georgescu

Investigating the large number of various materials now available, some materials scientists promoted a method of combining existing materials with geometric features. By studying natural materials, the performance of simple constituent materials is improved by manipulating their internal geometry; as such, any base material can be used by performing millimeter-scale air channels. The porous structure obtained utilizes the low thermal conductivity of the gas in the pores. At the same time, heat radiation and gas convection is hindered by the solid structure. The solution that was proposed in this research for obtaining a material with porous structure consisted in perforating extruded polystyrene (XPS) panels, as base material. Perforation was performed horizontally and at an angle of 45 degrees related to the face panel. The method is simple and cost-effective. Perforated and simple XPS panels were subjected to three different temperature regimes in order to measure the thermal conductivity. There was an increase in thermal conductivity with the increase in average temperature in all studied cases. The presence of air channels reduced the thermal conductivity of the perforated panels. The reduction was more significant at the panels with inclined channels. The differences between the thermal conductivity of simple XPS and perforated XPS panels are small, but the latter can be improved by increasing the number of channels and the air channels’ diameter. Additionally, the higher the thermal conductivity of the base material, the more significant is the presence of the channels, reducing the effective thermal conductivity. A base material with low emissivity may also reduce the thermal conductivity.


Horticulturae ◽  
2021 ◽  
Vol 7 (7) ◽  
pp. 165
Author(s):  
Allan Waniale ◽  
Rony Swennen ◽  
Settumba B. Mukasa ◽  
Arthur K. Tugume ◽  
Jerome Kubiriba ◽  
...  

Seed set in banana is influenced by weather, yet the key weather attributes and the critical period of influence are unknown. We therefore investigated the influence of weather during floral development for a better perspective of seed set increase. Three East African highland cooking bananas (EAHBs) were pollinated with pollen fertile wild banana ‘Calcutta 4′. At full maturity, bunches were harvested, ripened, and seeds extracted from fruit pulp. Pearson’s correlation analysis was then conducted between seed set per 100 fruits per bunch and weather attributes at 15-day intervals from 105 days before pollination (DBP) to 120 days after pollination (DAP). Seed set was positively correlated with average temperature (P < 0.05–P < 0.001, r = 0.196–0.487) and negatively correlated with relative humidity (RH) (P < 0.05–P < 0.001, r = −0.158–−0.438) between 75 DBP and the time of pollination. After pollination, average temperature was negatively correlated with seed set in ‘Mshale’ and ‘Nshonowa’ from 45 to 120 DAP (P < 0.05–P < 0.001, r = −0.213–−0.340). Correlation coefficients were highest at 15 DBP for ‘Mshale’ and ‘Nshonowa’, whereas for ‘Enzirabahima’, the highest were at the time of pollination. Maximum temperature as revealed by principal component analysis at the time of pollination should be the main focus for seed set increase.


Computation ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 63
Author(s):  
Sondre Norheim ◽  
Shokri Amzin

Gas turbine performance is closely linked to the turbine inlet temperature, which is limited by the turbine guide vanes ability to withstand the massive thermal loads. Thus, steam cooling has been introduced as an advanced cooling technology to improve the efficiency of modern high-temperature gas turbines. This study compares the cooling performance of compressed air and steam in the renowned radially cooled NASA C3X turbine guide vane, using a numerical model. The conjugate heat transfer (CHT) model is based on the RANS-method, where the shear stress transport (SST) k−ω model is selected to predict the effects of turbulence. The numerical model is validated against experimental pressure and temperature distributions at the external surface of the vane. The results are in good agreement with the experimental data, with an average error of 1.39% and 3.78%, respectively. By comparing the two coolants, steam is confirmed as the superior cooling medium. The disparity between the coolants increases along the axial direction of the vane, and the total volume average temperature difference is 30 K. Further investigations are recommended to deal with the local hot-spots located near the leading- and trailing edge of the vane.


Sign in / Sign up

Export Citation Format

Share Document