Aluminum Smelting Carbon Dust as a Potential Raw Material for Gallium and Germanium Extraction

JOM ◽  
2021 ◽  
Author(s):  
Aleksandr Shimanskii ◽  
Andrey Yasinskiy ◽  
Igor Yakimov ◽  
Vladimir Losev ◽  
Olga Buyko ◽  
...  
2001 ◽  
Vol 60 (1) ◽  
pp. 11-14 ◽  
Author(s):  
Lucia Savadori ◽  
Eraldo Nicotra ◽  
Rino Rumiati ◽  
Roberto Tamborini

The content and structure of mental representation of economic crises were studied and the flexibility of the structure in different social contexts was tested. Italian and Swiss samples (Total N = 98) were compared with respect to their judgments as to how a series of concrete examples of events representing abstract indicators were relevant symptoms of economic crisis. Mental representations were derived using a cluster procedure. Results showed that the relevance of the indicators varied as a function of national context. The growth of unemployment was judged to be by far the most important symptom of an economic crisis but the Swiss sample judged bankruptcies as more symptomatic than Italians who considered inflation, raw material prices and external accounts to be more relevant. A different clustering structure was found for the two samples: the locations of unemployment and gross domestic production indicators were the main differences in representations.


2006 ◽  
Vol 103 (2) ◽  
pp. 76-81
Author(s):  
C. Perin Filho ◽  
D. Tassinari Miranda ◽  
E. Medeiros Milanez ◽  
E. Luiz Massanori Harano ◽  
E. Torres Bispo dos Santos ◽  
...  

Metrologiya ◽  
2020 ◽  
pp. 38-51
Author(s):  
V. N. Astapov ◽  
I. N. Kozlova

This article presents the rationale and methodology for developing an intrinsically safe device, namely, a hydrostatic fiber optic sensor with a position-sensitive detector for monitoring the level of oil products in large-capacity tanks at oil depots and during pumping in a raw material warehouses. This device suitable for continuous monitoring of the liquid level, based on the measurement of a hydrostatic column of liquid with automatic offset of changes in the density of the liquid. Offset is carried out by means of a displacer (a fully submerged float), inside which a housing with a position-sensitive detector (PSD) is integrated. Theoretical validation of the bellows suspension usage for a displacer is given. During filling a container with a liquid whose level is measured, liquid bellows, the movement of which is recorded by an optical triangulation sensor using the reflected infrared ray incident on the bottom of the bellows. The principle of the triangulation sensor operation is based on the geometric properties of the triangles. The pulses of infrared radiation come through a fiber optic cable. In order to measure the movement of the surface (the bottom of the bellows) by measuring the movement of the reflected beam, a position-sensitive detector is used, which is located in a remote controller. In this device for the intrinsic safety problem solution, optical inputs of a fiber optic flat cable are located in the active zone of the sensor, which is connected to the optical inputs of a position-sensitive detector, operated on the principles of photoelectric effect. The light spot moving along the sensitive zone and converted by the detector into a one-dimensional signal proportional to the distance to the object. hydrostatically applies pressure over the entire effective area of the measuring


2016 ◽  
Vol 2 (4) ◽  
pp. 234-241
Author(s):  
Mohammed Al-Shakka ◽  
Ebtesam Abood ◽  
Adel Al-Dhubhany ◽  
Sami Abdo Radman Aldubai ◽  
Khaled Said ◽  
...  

Because of the almost-instant connection with the welfare and well-being of individuals, pharmaceutical industry stands prominently as a very important factor for the improvement and progress of a healthy productive nation. These days, pharmaceutical industry thrives as one of the largest and exponentially expanding global industries. Nonetheless, millions of people in low income developing countries, have to suffer from the fatal consequences of the inaccessibility and non-availability of essential drugs. This is also happening in Yemen, where the pharmaceutical manufacturers sector have to face up to many challenges. The Yemen Drug Company (YEDCO) was founded in 1964 by the Yemeni government as it collaborated with private investors. It was endorsed as a company with the expertise in the medicinal drug marketing. YEDCO started its work by taking in drugs from foreign companies and then locally marketing and distributing them. In 1982, YEDCO built the first medicinal factory for drugs in Sana’a. Since then, seven companies were set up to manufacture medicines in Yemen. The expanding population has led to the need to have more pharmaceutical products. It may be understandable that pharmaceutical manufacturer companies are also hit by the political crisis in the country. Inadequate amount of fuel and raw material as well as low security status were some of the underlying factors behind these ill-effects in Yemen. Imported drugs make up about nearly 90% % of the pharmaceutical market compared to 10% drugs from the domestic market. This situation has led to an additional burden being shouldered by the national economy, where Yemen spends about US$263 million annually on pharmaceutical drugs, in reference to the national Supreme Drugs Authority. Although there is a very quick growth in the population and drugs consumption, the pharmaceutical industry has not been very active, where global pharmaceutical products play their role dominantly on the domestic market. The pharmaceutical production necessitates skilled human resources like university graduates. By contrast, the government and the private sector should also motivate the pharmaceutical industry and make use of the local employment


Liquidity ◽  
2017 ◽  
Vol 6 (2) ◽  
pp. 95-102
Author(s):  
Sri Setia Ningsih

The purpose of this research is to know about working capital management applied, and its influence on profitability and risk. The research object is trading company moves in import & distribute chemical raw material. The research used analysis descriptive method, and the hypothesis was testing by simple linier regression, correlation, and determination. The result of the research shows that the effect of the implementation of working capital management on the change of the net working capital with tend to rise has a profitability level of 10.4% lower than the net working capital change with tend to go down of 46%, but instead on the risk level, the net working capital change with tend to rise has a risk level of 43.8% higher than the change in net working capital with tend to go down of 0.3%.Based on  t test, the result shows that the net working capital change influence  is not significant  to profitability and risk.


TAPPI Journal ◽  
2013 ◽  
Vol 12 (6) ◽  
pp. 9-15 ◽  
Author(s):  
TOMI HIETANEN ◽  
JUHA TAMPER ◽  
KAJ BACKFOLK

The use of a new, technical, high-purity magnesium hydroxide-based peroxide bleaching additive was evaluated in full mill-scale trial runs on two target brightness levels. Trial runs were conducted at a Finnish paper mill using Norwegian spruce (Picea abies) as the raw material in a conventional pressurized groundwood process, which includes a high-consistency peroxide bleaching stage. On high brightness grades, the use of sodium-based additives cause high environmental load from the peroxide bleaching stage. One proposed solution to this is to replace all or part of the sodium hydroxide with a weaker alkali, such as magnesium hydroxide. The replacement of traditional bleaching additives was carried out stepwise, ranging from 0% to 100%. Sodium silicate was dosed in proportion to sodium hydroxide, but with a minimum dose of 0.5% by weight on dry pulp. The environmental effluent load from bleaching of both low and high brightness pulps was significantly reduced. We observed a 35% to 48% reduction in total organic carbon (TOC), 37% to 40% reduction in chemical oxygen demand (COD), and 34% to 60% reduction in biological oxygen demand (BOD7) in the bleaching effluent. At the same time, the target brightness was attained with all replacement ratios. No interference from transition metal ions in the process was observed. The paper quality and paper machine runnability remained good during the trial. These benefits, in addition to the possibility of increasing production capacity, encourage the implementation of the magnesium hydroxide-based bleaching concept.


TAPPI Journal ◽  
2014 ◽  
Vol 13 (11) ◽  
pp. 37-43 ◽  
Author(s):  
LIISA KOTANEN ◽  
MIKA KÖRKKÖ ◽  
ARI ÄMMÄLÄ ◽  
JOUKO NIINIMÄKI

The use of recovered paper as a raw material for paper production is by far the most economical and ecological strategy for the disposal of waste paper. However, paper production from recovered paper furnish generates a great amount of residues, and the higher the demand requirements for the end product, the higher the amount of rejected material. The reason for this is that the selectivity of the deinking process is limited; therefore, some valuable components are also lost in reject streams. The rejection of usable components affects the economics of recycled paper production. As the cost of waste disposal continues to increase, this issue is becoming more and more severe. This paper summarizes the current state of the resource efficiency in recycled pulp production and provides information on the volumes of rejected streams and the usable material within them. Various means to use these reject streams are also discussed, including the main findings of a recent thesis by the main author. This review summarizes current internal and external use of reject streams generated in the deinking operations.


TAPPI Journal ◽  
2015 ◽  
Vol 14 (3) ◽  
pp. 167-174 ◽  
Author(s):  
QIANQIAN WANG ◽  
J.Y. ZHU

Mixed office paper (MOP) pulp without deinking with an ash content of 18.1 ± 1.5% was used as raw material to produce nanofiller-paper. The MOP pulp with filler was mechanically fibrillated using a laboratory stone grinder. Scanning electron microscope imaging revealed that the ground filler particles were wrapped by cellulose nanofibrils (CNFs), which substantially improved the incorporation of filler into the CNF matrix. Sheets made of this CNF matrix were densified due to improved bonding. Specific tensile strength and modulus of the nanofiller-paper with 60-min grinding reached 48.4 kN·m/kg and 8.1 MN·m/kg, respectively, approximately 250% and 200% of the respective values of the paper made of unground MOP pulp. Mechanical grinding duration did not affect the thermal stability of the nanofiller-paper.


2015 ◽  
Vol 2 (1) ◽  
pp. 6-12
Author(s):  
Agus Sugiarta ◽  
Houtman P. Siregar ◽  
Dedy Loebis

Automation of process control in chemical plant is an inspiring application field of mechatronicengineering. In order to understand the complexity of the automation and its application requireknowledges of chemical engineering, mechatronic and other numerous interconnected studies.The background of this paper is an inherent problem of overheating due to lack of level controlsystem. The objective of this research is to control the dynamic process of desired level more tightlywhich is able to stabilize raw material supply into the chemical plant system.The chemical plant is operated within a wide range of feed compositions and flow rates whichmake the process control become difficult. This research uses modelling for efficiency reason andanalyzes the model by PID control algorithm along with its simulations by using Matlab.


Fitoterapia ◽  
2019 ◽  
Vol 4 (4) ◽  
pp. 55-58
Author(s):  
J. M. Steshenko ◽  
◽  
O. V. Мazulin ◽  
G. P. Smoylovska ◽  
G. V. Mazulin ◽  
...  
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document