scholarly journals Szklary nickel deposit — a review and introduction to attempts in hydrometallurgical processing

2021 ◽  
Author(s):  
Wojciech Kaczan ◽  
Jan Kudełko ◽  
Herbert Wirth
Keyword(s):  
Fifteenth Century ◽  
Circular Economy ◽  
Raw Materials ◽  
Heap Leaching ◽  
Nickel Deposit ◽  
Hydrometallurgical Processing ◽  
History Of ◽  
Materials Used ◽  
Future Project ◽  
Pilot Tests

AbstractSzklary Massif is situated about 60 km from Wrocław (southwestern Poland) and around 7 km from Ząbkowice Śląskie. The history of raw materials in this region started in the fifteenth century with the discovery of precious minerals like chrysoprase, chalcedony, and opal. The exploitation of nickel ore in this region started in the nineteenth century and was conducted with few stops until 1983. The remaining 17.21 mln mg of ore with 125,000 mg of nickel might be a chance to satisfy rising demand for raw materials used to develop electromobility. One of the crucial aspects regarding possible investment is the processing of ore. The pilot tests show the efficient use of heap leaching. The authors provide the future project in Szklary within the framework of circular economy.

scholarly journals Architectural ruins: geoculture of the anatomy of buildings as illustrated by Casa Ippolito, Malta

2021 ◽  
Vol 9 (1) ◽  
Author(s):  
Lino Bianco
Keyword(s):  
Material Culture ◽  
Building Materials ◽  
Raw Materials ◽  
Primary Source ◽  
Secondary Sources ◽  
Non Invasive ◽  
History Of ◽  
Aerial Vehicle ◽  
Materials Used ◽  
Building Physics

AbstractRuins are a statement on the building materials used and the construction method employed. Casa Ippolito, now in ruins, is typical of 17th-century Maltese aristocratic country residences. It represents an illustration of secondary or anthropogenic geodiversity. This paper scrutinises these ruins as a primary source in reconstructing the building’s architecture. The methodology involved on-site geographical surveying, including visual inspection and non-invasive tests, a geological survey of the local lithostratigraphy, and examination of notarial deeds and secondary sources to support findings about the building’s history as read from its ruins. An unmanned aerial vehicle was used to digitally record the parlous state of the architectural structure and karsten tubes were used to quantify the surface porosity of the limestone. The results are expressed from four perspectives. The anatomy of Casa Ippolito, as revealed in its ruins, provides a cross-section of its building history and shows two distinct phases in its construction. The tissue of Casa Ippolito—the building elements and materials—speaks of the knowledge of raw materials and their properties among the builders who worked on both phases. The architectural history of Casa Ippolito reveals how it supported its inhabitants’ wellbeing in terms of shelter, water and food. Finally, the ruins in their present state bring to the fore the site’s potential for cultural tourism. This case study aims to show that such ruins are not just geocultural remains of historical built fabric. They are open wounds in the built structure; they underpin the anatomy of the building and support insights into its former dynamics. Ruins offer an essay in material culture and building physics. Architectural ruins of masonry structures are anthropogenic discourse rendered in stone which facilitate not only the reconstruction of spaces but also places for human users; they are a statement on the wellbeing of humanity throughout history.

scholarly journals Architectural Ruins: Geoculture of the anatomy of buildings as illustrated by Casa Ippolito, Malta

2021 ◽  
Author(s):  
Lino Bianco
Keyword(s):  
Material Culture ◽  
Building Materials ◽  
Raw Materials ◽  
Primary Source ◽  
Secondary Sources ◽  
Non Invasive ◽  
History Of ◽  
Aerial Vehicle ◽  
Materials Used ◽  
Building Physics

Abstract Ruins are a statement on the building materials used and the construction method employed. Casa Ippolito, now in ruins, is typical of seventeenth-century Maltese aristocratic country residences. It represents an illustration of secondary or anthropogenic geodiversity. This paper scrutinises these ruins as a primary source in reconstructing the building’s architecture. The methodology involved on-site geographical surveying, including visual inspection and non-invasive tests, a geological survey of the local lithostratigraphy, and examination of notarial deeds and secondary sources to support findings about the building’s history as read from its ruins. An unmanned aerial vehicle was used to digitally record the parlous state of the architectural structure and karsten tubes were used to quantify the surface porosity of the limestone. The results are expressed from four perspectives. The anatomy of Casa Ippolito, as revealed in its ruins, provides a cross-section of its building history and shows two distinct phases in its construction. The tissue of Casa Ippolito – the building elements and materials – speaks of the knowledge of raw materials and their properties among the builders who worked on both phases. The architectural history of Casa Ippolito reveals how it supported its inhabitants’ wellbeing in terms of shelter, water and food. Finally, the ruins in their present state bring to the fore the site’s potential for cultural tourism. This case study aims to show that such ruins are not just geocultural remains of historical built fabric. They are open wounds in the built structure; they underpin the anatomy of the building and support insights into its former dynamics. Ruins offer an essay in material culture and building physics. Architectural ruins of masonry structures are anthropogenic discourse rendered in stone which facilitate not only the reconstruction of spaces but also places for human users; they are a statement on the wellbeing of humanity throughout history.

scholarly journals Architectural Ruins: A geocultural essay on the anatomy of buildings as illustrated by Casa Ippolito, Malta

2020 ◽  
Author(s):  
Lino Bianco
Keyword(s):  
Material Culture ◽  
Building Materials ◽  
Raw Materials ◽  
Primary Source ◽  
Secondary Sources ◽  
Non Invasive ◽  
History Of ◽  
Materials Used ◽  
Building Physics

Abstract Ruins are a statement on the building materials used and the construction method employed. Casa Ippolito, now in ruins, is typical of seventeenth-century Maltese aristocratic country residences. It represents an illustration of secondary or anthropogenic geodiversity. This paper scrutinises these ruins as a primary source in reconstructing the building’s architecture. The methodology involved on-site geographical surveying, including visual inspection and non-invasive tests, a geological survey of the local lithostratigraphy, and examination of notarial deeds and secondary sources to support findings about the building’s history as read from its ruins. The results are expressed from four perspectives. The anatomy of Casa Ippolito, as revealed in its ruins, provides a cross-section of its construction history and shows two distinct phases in its construction. The tissue of Casa Ippolito – the building elements and materials – speaks of the knowledge of raw materials and their properties among the builders who worked on both phases of its construction. The architectural history of Casa Ippolito reveals how it met its inhabitants’ needs for shelter, water and food. Finally, the ruins in their present state bring to the fore the site’s potential for cultural tourism. This case study aims to show that such ruins are not just geocultural remains of historical built fabric. They are open wounds in the built structure; they underpin the anatomy of the building and support insights into its former dynamics. Ruins offer an essay in material culture and building physics. Architectural ruins of masonry structures are anthropogenic essays rendered in stone which facilitate not only the reconstruction of spaces but also places for human users; they are a statement on the wellbeing of humanity throughout history.

scholarly journals Rhazes’ Contributions to Alchemy and Pharmacy

2021 ◽  
Vol In Press (In Press) ◽  
Author(s):  
Ensiye Affi ◽  
Samaneh Soleymani ◽  
Arman Zargaran
Keyword(s):  
History Of Science ◽  
Raw Materials ◽  
Google Scholar ◽  
Human History ◽  
Speed Of Light ◽  
Finite Speed ◽  
Experimental Apparatus ◽  
History Of ◽  
Materials Used ◽  
Citation Databases

Context: Persia has been the cradle of science across human history. Many of today’s concepts in science, such as the finite speed of light and alcohol distillation, were first proposed by Persian scientists. Mohammad ibn Zakariya Razi (Rhazes) is undoubtedly one of the greatest Persian scientists over human history. Evidence Acquisition: In this paper, in addition to a brief review of the history of pharmacy and chemistry sciences in Persia, Rhazes’ valuable books in the fields of pharmacy and chemistry, along with a brief description of them, were introduced. Data were extracted from different historical and bibliography books and also the citation databases of PubMed, Scopus, and Google Scholar. Results: Rhazes’ books and treatises in the fields of pharmacy and chemistry have been classified into three categories: 1) the books and treatises containing some sections on pharmacy like Al-Hawi fi al-Tibb (Liber Continens) and Al-Mansouri fi al-Tibb, 2) those written merely on pharmacy, like Qarabadin (pharmacopeia), and 3) the books focusing on alchemy (kimia), like Sirr al-Asrar (Secret of secrets) and Al Asrar (Liber Secretorum). Three volumes of Al Hawi fi al-Tibb were applied as a reference in pharmacology in Western universities for many years. Sirr al-Asrar is his most important book on alchemy, describing raw materials used in alchemy, experimental apparatus necessary for alchemical investigations, and detailed procedures for the chemical manipulation of arsenic and sulfur. Conclusions: These valuable manuscripts demonstrate the ancient heritage of Persians and the great roles and contributions of Persian scientists in the history of science.

scholarly journals Rare-earth metal ore processing technologies when developing new deposits

2020 ◽  
pp. 47-53
Author(s):  
T. I. Yushina ◽  
◽  
I. M. Petrov ◽  
S. A. Cherny ◽  
A. I. Petrova ◽  
...  
Keyword(s):  
Rare Earth ◽  
Raw Materials ◽  
Rare Earth Metals ◽  
Earth Metal ◽  
Dense Medium ◽  
Clear Trend ◽  
Processing Technologies ◽  
Hydrometallurgical Processing ◽  
Mass Fractions ◽  
Materials Used

The article provides a brief overview of processing technologies for rare-earth raw materials used under greenfield development projects in different countries of the world (Africa, Greenland, Australia, Canada). The projects feature deposits with different mineral compositions, mass fractions of rare-earth metals (REM) in ores of 0.2 to 15 %, and the presence of niobium, zirconium, tantalum, phosphorus, uranium, and thorium. The resulting production facilities will extract 180 kt to 7.2 Mt rare-earth ore annually to generate 1.5 to 20 kt oxides of heavy and light groups of rare-earth metals along with the rare metals. The analysis of technologies for the projects considered demonstrates that magnetic and radiometric separation, dense-medium concentration and flotation with hydrometallurgical processing in the form of leaching with sulfuric or hydrochloric acid, followed by extraction of the target products, will be used for the processing of rare-earth raw materials. A characteristic feature of a number of projects is, first of all, the direct hydrometallurgical processing of the feed. The concentration technologies for ores containing rare-earth metals also indicate a clear trend towards a more active use of high-intensity magnetic separation. The main products to be obtained with these technologies will include composite concentrates of oxides or carbonates of rare-earth metals. At the same time, the commissioning dates for the projects are being repeatedly postponed; the implementation of many projects remains uncertain, which is largely due to the stagnant dynamics of global prices for rare-earth metals.

SIFAT MEKANIK PAPAN GYPSUM DARI SERBUK LIMBAH KAYU NON KOMERSIAL

2014 ◽  
Vol 6 (2) ◽  
pp. 1
Author(s):  
Saibatul Hamdi
Keyword(s):  
Raw Materials ◽  
Wood Particle ◽  
Quality Standards ◽  
Gypsum Board ◽  
Average Value ◽  
Wood Particles ◽  
Sawn Timber ◽  
Materials Used ◽  
Artocarpus Elasticus ◽  
Ficus Glomerata

The purpose of this research is to know the mechanical strength of gypsum board by utilizing waste sawn wood. Raw materials used consist of flour, gypsum,wood particles, boraks and kambang (Goniothalamus sp), wood tarap (Artocarpus elasticus REINW) and lua (Ficus glomerata ROXB). Wood particle 40 mesh and 60 mesh, concentrations boraks of 1 and 2 and the percentage particles of gypsum sawn timber is 300, 400 and 500%. The results showed that the average value Modulus of Rufture (MoR) in lua wood ranges from 12.55 – 14,47 kgcm2, wood kambang 25.10-31,11 kgcm2 and wood tarap 19.20- 24,18 kgcm2. As for Modulus of Elasticity (MoE) on the lua 1129,80- 2092,70 kgcm2, wood kambang 2512,37-3971,32 kgcm2 and tarap 2050,63-2691,09 kgcm2. Gypsum board are mechanical properties do not meet quality standards created SNI 03-6434-2000.Keywords: sawdust, lua, kambang, tarap, gypsum, mechanical

European experience in transition to circular economy

2020 ◽  
Vol 19 (4) ◽  
pp. 598-617 ◽  
Author(s):  
S.V. Ratner
Keyword(s):  
European Union ◽  
Circular Economy ◽  
Raw Materials ◽  
Action Plan ◽  
National Level ◽  
The European Union ◽  
Scientific Methods ◽  
European Experience ◽  
General Scientific ◽  
The Eu

Subject. The article considers the concept of circular economy, which has originated relatively recently in the academic literature, and is now increasingly recognized in many countries at the national level. In the European Union, the transition to circular economy is viewed as an opportunity to improve competitiveness of the European Union, protect businesses from resource shortages and fluctuating prices for raw materials and supplies, and a way to increase employment and innovation. Objectives. The aim of the study is to analyze the incentives developed by the European Commission for moving to circular economy, and to assess their effectiveness on the basis of statistical analysis. Methods. I employ general scientific methods of research. Results. The analysis of the EU Action Plan for the Circular Economy enabled to conclude that the results of the recent research in circular economy barriers, eco-innovation, technology and infrastructure were successfully integrated into the framework of this document. Understanding the root causes holding back the circular economy development and the balanced combination of economic and administrative incentives strengthened the Action Plan, and it contributed to the circular economy development in the EU. Conclusions. The measures to stimulate the development of the circular economy proposed in the European Action Plan can be viewed as a prototype for designing similar strategies in other countries, including Russia. Meanwhile, a more detailed analysis of barriers to the circular economy at the level of individual countries and regions is needed.

COMPARATIVE ANALYSIS OF BIOACTIVE SUBSTANCES CONTENT IN THE LEAVES AND FRUITS OF A ROWAN-TREE (SORBUS AUCUPARIA FRUCTUS) AND ASSESSMENT OF PROSPECTS IN MEDICINE AND PHARMACY

2020 ◽  
pp. 58-62
Author(s):  
Chernichkina A.D.
Keyword(s):  
Raw Materials ◽  
Wide Distribution ◽  
Biologically Active ◽  
Bioactive Substances ◽  
Plant Raw Materials ◽  
Mountain Ash ◽  
The Russian Federation ◽  
Materials Used ◽  
Active Substances ◽  
Pectin Substances

A large number of biologically active substances, organic acids, tannins, and pectin substances were detected during the study of fruits, leaves, and pulp of the fruits of mountain Ash. The content of these substances in leaves and pulp will significantly expand the arsenal of medicinal plant raw materials used. Given the wide distribution of mountain Ash in the territory of the Russian Federation, harvesting leaves from the same plants after harvesting the fruit and using pulp will make it possible to obtain new phytopreparations.

Mutual Influence Study of Food Acids and Polysaccharides of Different Nature on the Sensory Perception of Low-Calorie Sweet Dishes

Food Industry ◽  
2020 ◽  
Vol 5 (2) ◽  
pp. 71-78
Author(s):  
Ekaterina Minnikhanova ◽  
Nataliya Zavorokhina ◽  
Anna Gilina
Keyword(s):  
Mutual Influence ◽  
Raw Materials ◽  
Sucrose Solution ◽  
Complex Mixture ◽  
The Body ◽  
Sensory Characteristics ◽  
Apple Pectin ◽  
Low Calorie ◽  
Functional Reserves ◽  
Materials Used

Abstract The inclusion of polysaccharide thickeners in the recipes of sweet dishes increases the functional reserves of the body, contributes to the preservation of health and the prevention of diseases. The purpose of the research is to study the sensory characteristics of polysaccharides of various nature when combined with food acids, to develop a recipe for a basic mixture of low-calorie meals for public catering. The authors analyzed citric, lactic and succinic acids in combinations with polysaccharides of various nature. Organoleptic tests were evaluated by a touch panel. The organization of the tasting analysis corresponded to GOST ISO 6658-2016; the consistency was determined according to GOST 31986-2012, GOST ISO 11036-2017, GOST ISO 8588-2011. The optimal organoleptic combinations of the presented food acids and complex additives of sweeteners (CDP) were identified, which included aspartame, sodium saccharinate, Sucralose, sweetness coefficient – 340: the mixture with citric acid had a long pleasant aftertaste without foreign tastes and the best taste characteristics. Using the “A-not A” method, we found that the sample with the addition of CDP is identical to the sucrose solution. In the second part of the study, polysaccharides were added to model samples of acids with complex sweeteners; the best sensory characteristics were obtained by model samples consisting of a mixture of low-esterified Apple pectin with lactic acid and KDP. The technology of obtaining a stable elastic jelly using low-esterified Apple pectin has been developed, since the complex mixture of sweeteners and food acids does not have a dehydrating effect. Developed a dry mix recipe that can serve as a basic development, low-calorie sweet products for catering and has a variance of use of lactic and succinic acids, depending on the flavor characteristics of the raw materials used and its corrective ability.

Sign in / Sign up

Export Citation Format

Share Document