SIFAT MEKANIK PAPAN GYPSUM DARI SERBUK LIMBAH KAYU NON KOMERSIAL

2014 ◽  
Vol 6 (2) ◽  
pp. 1
Author(s):  
Saibatul Hamdi
Keyword(s):  
Raw Materials ◽  
Wood Particle ◽  
Quality Standards ◽  
Gypsum Board ◽  
Average Value ◽  
Wood Particles ◽  
Sawn Timber ◽  
Materials Used ◽  
Artocarpus Elasticus ◽  
Ficus Glomerata

The purpose of this research is to know the mechanical strength of gypsum board by utilizing waste sawn wood. Raw materials used consist of flour, gypsum,wood particles, boraks and kambang (Goniothalamus sp), wood tarap (Artocarpus elasticus REINW) and lua (Ficus glomerata ROXB). Wood particle 40 mesh and 60 mesh, concentrations boraks of 1 and 2 and the percentage particles of gypsum sawn timber is 300, 400 and 500%. The results showed that the average value Modulus of Rufture (MoR) in lua wood ranges from 12.55 – 14,47 kgcm2, wood kambang 25.10-31,11 kgcm2 and wood tarap 19.20- 24,18 kgcm2. As for Modulus of Elasticity (MoE) on the lua 1129,80- 2092,70 kgcm2, wood kambang 2512,37-3971,32 kgcm2 and tarap 2050,63-2691,09 kgcm2. Gypsum board are mechanical properties do not meet quality standards created SNI 03-6434-2000.Keywords: sawdust, lua, kambang, tarap, gypsum, mechanical

Determination of the true metabolizable energy (TMEN) by roosters of feedstuffs made from seal by-products

1997 ◽  
Vol 77 (1) ◽  
pp. 165-167 ◽  
Author(s):  
D. M. Anderson ◽  
L. White ◽  
J. MacLean
Keyword(s):  
Raw Materials ◽  
Calcium Content ◽  
Matter Content ◽  
Metabolizable Energy ◽  
Dry Matter Content ◽  
Average Value ◽  
Freeze Dried ◽  
Gross Energy ◽  
Materials Used ◽  
By Products

TMEN values for various seal by-product feedstuffs were determined using roosters. Four samples of seal meal [seal meal 1991, seal meal 1992, seal meal 1994 (juveniles), seal meal 1994 (mixed ages)] and three samples of seal meat (oven-dried at 50 °C, oven-dried at 120 °C, and freeze-dried) were given to 16 roosters (30 g: precision fed) housed in individual wire cages. Total collection of excreta from a 48-h period was used to provide samples for analysis of gross energy, nitrogen, and dry matter content. TMEN results indicate variability in quality of the meals, associated with the different raw materials used to produce the seal meals as well as year of production. The TMEN values for the seal meals ranged from 3896 kcal kg−1 to 4621 kcal kg−1 with an average value of 4283 kcal kg−1. The crude protein content of the seal meals ranged from 64.2 to 67.6%, the crude fat content from 12.7 to 14.7%, the calcium content from 5.38 to 8.98% and the total phosphorus content from 3.16 to 4.79%. Oven-drying the seal meat at 120 °C significantly reduced TMEN (2643 kcal kg–1). The TMEN values for the freeze-dried and the low temperature oven-dried (50 °C) seal meat were not significantly different (4008 kcal kg–1 and 4013 kcal kg–1, respectively). Key words: True metabolizable energy, seal by-products, roosters, seal meal, seal meat, TMEN

scholarly journals PEMANFAATAN KACANG MERAH (Phaseolus vulgaris L) PADA PEMBUATAN KECAP MANIS

2019 ◽  
Author(s):  
yurnalis
Keyword(s):  
Phaseolus Vulgaris ◽  
Chemical Analysis ◽  
Raw Materials ◽  
Consumer Preference ◽  
Quality Standards ◽  
Quality Standard ◽  
Soy Sauce ◽  
Phaseolus Vulgaris L ◽  
Quality Requirements ◽  
Materials Used

Soy sauce is a liquid fermented vegetable or animal protein with high protein in a salt solution and is currently not used as a source of protein but more for flavoring purposes. This study aims to determine the level of substitution of red beans that produce red soy sauce according to quality standards and preferred by consumers. This research has been carried out at the Basic Laboratory of Ekasakti Padang University and ATIP in August to September 2006. The raw materials used are red beans, and other additives. Chemicals are used for chemical analysis accompanied by laboratory equipment.The results of the study: (1) protein content to the level of soybean substitution with red beans by 30% still meet the quality requirements of red soy sauce according to the Soy Sauce Quality Standard (SII), (2) the amount of red soy sauce mold at all levels of soybean substitution with red beans meets the standards required, and (3) the level of consumer preference (organoleptic test) on the resulting sweet soy sauce decreases as the use of soybeans decreases, ranging from normal to like.

PENGEMBANGAN BAHAN AJAR TEKS DRAMA BERDASARKAN PENGALAMAN PENGARANG

2019 ◽  
Vol 8 (2) ◽  
Author(s):  
Didin Khaerudin ◽  
Suherli Kusmana ◽  
Iyay Robia Khaerudin
Keyword(s):  
Personal Experience ◽  
Teaching Materials ◽  
Learning Skills ◽  
Student Activities ◽  
Development Method ◽  
Average Value ◽  
Surrounding Environment ◽  
Basic Competencies ◽  
Materials Used ◽  
Minimum Criteria

Research conducted to develop drama text teaching materials based on the experience of the author of the drama script aims to make it easier for students to understand drama text material. In addition, based on the author's experience students are expected to emulate the author's creative process in writing a paper. The research method used in this research is the research and development method. Based on the results of the interview it can be concluded that the ability to write drama is determined based on mastery of the elements of drama and the ability to develop stories based on the author's experience. The process of writing drama is done in several steps: (1) searching for ideas based on personal experience, other people, or the surrounding environment; (2) processing ideas to find plots (characters), characters or characters that vary with their inner conflicts, settings and dialogues, interesting conflicts, and messages to be conveyed; (3) starts the process of writing drama with stages and elements of drama; (4) revision of drama products. Teaching material developed is presented from basic competencies of knowledge and basic competencies of learning skills. Based on experiments on developed teaching materials it is known that the average value of the ability to write plays gets a score exceeding the minimum criteria, so that the teaching materials used are effective. Based on observations it is known that teaching materials can help students in learning and student activities become more independent, and active.

COMPARATIVE ANALYSIS OF BIOACTIVE SUBSTANCES CONTENT IN THE LEAVES AND FRUITS OF A ROWAN-TREE (SORBUS AUCUPARIA FRUCTUS) AND ASSESSMENT OF PROSPECTS IN MEDICINE AND PHARMACY

2020 ◽  
pp. 58-62
Author(s):  
Chernichkina A.D.
Keyword(s):  
Raw Materials ◽  
Wide Distribution ◽  
Biologically Active ◽  
Bioactive Substances ◽  
Plant Raw Materials ◽  
Mountain Ash ◽  
The Russian Federation ◽  
Materials Used ◽  
Active Substances ◽  
Pectin Substances

A large number of biologically active substances, organic acids, tannins, and pectin substances were detected during the study of fruits, leaves, and pulp of the fruits of mountain Ash. The content of these substances in leaves and pulp will significantly expand the arsenal of medicinal plant raw materials used. Given the wide distribution of mountain Ash in the territory of the Russian Federation, harvesting leaves from the same plants after harvesting the fruit and using pulp will make it possible to obtain new phytopreparations.

Mutual Influence Study of Food Acids and Polysaccharides of Different Nature on the Sensory Perception of Low-Calorie Sweet Dishes

Food Industry ◽  
2020 ◽  
Vol 5 (2) ◽  
pp. 71-78
Author(s):  
Ekaterina Minnikhanova ◽  
Nataliya Zavorokhina ◽  
Anna Gilina
Keyword(s):  
Mutual Influence ◽  
Raw Materials ◽  
Sucrose Solution ◽  
Complex Mixture ◽  
The Body ◽  
Sensory Characteristics ◽  
Apple Pectin ◽  
Low Calorie ◽  
Functional Reserves ◽  
Materials Used

Abstract The inclusion of polysaccharide thickeners in the recipes of sweet dishes increases the functional reserves of the body, contributes to the preservation of health and the prevention of diseases. The purpose of the research is to study the sensory characteristics of polysaccharides of various nature when combined with food acids, to develop a recipe for a basic mixture of low-calorie meals for public catering. The authors analyzed citric, lactic and succinic acids in combinations with polysaccharides of various nature. Organoleptic tests were evaluated by a touch panel. The organization of the tasting analysis corresponded to GOST ISO 6658-2016; the consistency was determined according to GOST 31986-2012, GOST ISO 11036-2017, GOST ISO 8588-2011. The optimal organoleptic combinations of the presented food acids and complex additives of sweeteners (CDP) were identified, which included aspartame, sodium saccharinate, Sucralose, sweetness coefficient – 340: the mixture with citric acid had a long pleasant aftertaste without foreign tastes and the best taste characteristics. Using the “A-not A” method, we found that the sample with the addition of CDP is identical to the sucrose solution. In the second part of the study, polysaccharides were added to model samples of acids with complex sweeteners; the best sensory characteristics were obtained by model samples consisting of a mixture of low-esterified Apple pectin with lactic acid and KDP. The technology of obtaining a stable elastic jelly using low-esterified Apple pectin has been developed, since the complex mixture of sweeteners and food acids does not have a dehydrating effect. Developed a dry mix recipe that can serve as a basic development, low-calorie sweet products for catering and has a variance of use of lactic and succinic acids, depending on the flavor characteristics of the raw materials used and its corrective ability.

DAMPAK SUBSITUSI IMPORT TERHADAP DEFISIT NERACA PERDAGANGAN: STUDI KASUS IMPOR KULIT INDONESIA

2020 ◽  
Vol 4 (2) ◽  
Author(s):  
Ivan Yulianto ◽  
Ario Seno Nugroho
Keyword(s):  
General Equilibrium ◽  
Foreign Exchange ◽  
Computable General Equilibrium ◽  
Trade Balance ◽  
Raw Materials ◽  
Import Substitution ◽  
Leather Industry ◽  
Materials Used ◽  
Net Export ◽  
Balance Deficit

An alternative strategy to reduce the trade balance deficit simultaneously to increase the net foreign exchange is the import-substitution for raw materials used to produce an export goods. This paper proposes an import substitution study on footwear products that have a dependency on imported raw materials by 70 percent, with the largest composition being leather raw materials by 67 percent. This paper analyzes the relationship between subsidies on the leather industry to leather import-substitution, multiplier effect to footwear sector, and Indonesia trade balance. Author make use of simulation the on Input-Output 2010 table and Computable General Equilibrium (CGE) Model. The simulation shows 100 billion subsidies on the leather sector, lead for the substitution-import of leather by 7,94 million rupiah, increase the net export foreign exchange by 1.1 billion rupiah of the footwear sector, and for overall, increase Indonesia trade balance deficit by 68 billion rupiah. Keywords: Computable General Equilibrium, footwear, leather, net foreign exchange, subsidy.ABSTRAK: Salah satu terobosan untuk mengurangi defisit neraca perdagangan dan meningkatkan nilai neto devisa ekspor adalah dengan substitusi impor bahan baku yang digunakan untuk memproduksi barang ekspor. Paper ini mengusulkan kajian substitusi impor pada produk alas kaki yang mempunyai ketergantungan bahan baku impornya sebesar 70 persen, dengan komposisi terbesar adalah bahan baku kulit sebesar 67 persen. Tujuan penelitian ini adalah untuk mengetahui dampak stimulus subsidi pada industri kulit terhadap subtitusi impor kulit, dukungan multiplier sektor kulit terhadap sektor alas kaki, serta terhadap devisa ekspor Indonesia. Penelitian ini menggunakan simulasi model Computable General Equilibrium (CGE). Hasil simulasi menunjukkan stimulus subsidi sebesar 100 milyar rupiah pada sektor kulit memberikan substitusi bahan baku kulit sebesar 7,94 juta rupiah, menaikkan devisa ekspor sektor alas kaki sebesar 1.1 miliar rupiah, serta secara keseluruhan menambah defisit neraca berjalan Indonesia sebesar 68 miliar rupiah. Kata kunci: alas kaki, Computable General Equilibrium (CGE), devisa ekspor, kulit, subsidi.

New surface treatment techniques to minimize copper alloy leaching in drinking water

2012 ◽  
Vol 7 (4) ◽  
Author(s):  
Norikazu Sugaya
Keyword(s):  
Surface Treatment ◽  
Raw Materials ◽  
Organic Film ◽  
Forming Process ◽  
Mixed Acid ◽  
Treatment Techniques ◽  
Acid Washing ◽  
Washing Process ◽  
Film Forming ◽  
Materials Used

This new surface treatment is simple and easy as well as low in cost. The processes can even be performed by hand. Pharmaceutical raw materials used for the surface treatment, such as hydrochloric acid and nitric acid used in a mixed acid washing process and vegetable oil used in an organic film forming process, are easily obtained in many countries.

scholarly journals Bio-Based Alternatives to Phenol and Formaldehyde for the Production of Resins

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2237 ◽  
Author(s):  
P. R. Sarika ◽  
Paul Nancarrow ◽  
Abdulrahman Khansaheb ◽  
Taleb Ibrahim
Keyword(s):  
Raw Materials ◽  
Phenol Formaldehyde ◽  
Raw Material ◽  
Wood Industry ◽  
Suitable Material ◽  
The Past ◽  
Wide Range ◽  
Recent Developments ◽  
Sustainable Materials ◽  
Materials Used

Phenol–formaldehyde (PF) resin continues to dominate the resin industry more than 100 years after its first synthesis. Its versatile properties such as thermal stability, chemical resistance, fire resistance, and dimensional stability make it a suitable material for a wide range of applications. PF resins have been used in the wood industry as adhesives, in paints and coatings, and in the aerospace, construction, and building industries as composites and foams. Currently, petroleum is the key source of raw materials used in manufacturing PF resin. However, increasing environmental pollution and fossil fuel depletion have driven industries to seek sustainable alternatives to petroleum based raw materials. Over the past decade, researchers have replaced phenol and formaldehyde with sustainable materials such as lignin, tannin, cardanol, hydroxymethylfurfural, and glyoxal to produce bio-based PF resin. Several synthesis modifications are currently under investigation towards improving the properties of bio-based phenolic resin. This review discusses recent developments in the synthesis of PF resins, particularly those created from sustainable raw material substitutes, and modifications applied to the synthetic route in order to improve the mechanical properties.

scholarly journals Warpage Optimisation Using Recycled Polycar-bonates (PC) on Front Panel Housing

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1416
Author(s):  
Nur Aisyah Miza Ahmad Tamizi ◽  
Shayfull Zamree Abd Rahim ◽  
Abdellah El-hadj Abdellah ◽  
Mohd Mustafa Al Bakri Abdullah ◽  
Marcin Nabiałek ◽  
...  
Keyword(s):  
Simulation Analysis ◽  
Processing Parameters ◽  
Front Panel ◽  
Processing Parameter ◽  
Mechanical Recycling ◽  
Great Opportunity ◽  
Average Value ◽  
Optimal Processing ◽  
Materials Used ◽  
Optimisation Methods

Many studies have been done using recycled waste materials to minimise environmental problems. It is a great opportunity to explore mechanical recycling and the use of recycled and virgin blend as a material to produce new products with minimum defects. In this study, appropriate processing parameters were considered to mould the front panel housing part using R0% (virgin), R30% (30% virgin: 70% recycled), R40% (40% virgin: 60% recycled) and R50% (50% virgin: 50% recycled) of Polycarbonate (PC). The manufacturing ability and quality during preliminary stage can be predicted through simulation analysis using Autodesk Moldflow Insight 2012 software. The recommended processing parameters and values of warpage in x and y directions can also be obtained using this software. No value of warpage was obtained from simulation studies for x direction on the front panel housing. Therefore, this study only focused on reducing the warpage in the y direction. Response Surface Methodology (RSM) and Genetic Algorithm (GA) optimisation methods were used to find the optimal processing parameters. As the results, the optimal ratio of recycled PC material was found to be R30%, followed by R40% and R50% materials using RSM and GA methods as compared to the average value of warpage on the moulded part using R0%. The most influential processing parameter that contributed to warpage defect was packing pressure for all materials used in this study.

scholarly journals Architectural ruins: geoculture of the anatomy of buildings as illustrated by Casa Ippolito, Malta

2021 ◽  
Vol 9 (1) ◽  
Author(s):  
Lino Bianco
Keyword(s):  
Material Culture ◽  
Building Materials ◽  
Raw Materials ◽  
Primary Source ◽  
Secondary Sources ◽  
Non Invasive ◽  
History Of ◽  
Aerial Vehicle ◽  
Materials Used ◽  
Building Physics

AbstractRuins are a statement on the building materials used and the construction method employed. Casa Ippolito, now in ruins, is typical of 17th-century Maltese aristocratic country residences. It represents an illustration of secondary or anthropogenic geodiversity. This paper scrutinises these ruins as a primary source in reconstructing the building’s architecture. The methodology involved on-site geographical surveying, including visual inspection and non-invasive tests, a geological survey of the local lithostratigraphy, and examination of notarial deeds and secondary sources to support findings about the building’s history as read from its ruins. An unmanned aerial vehicle was used to digitally record the parlous state of the architectural structure and karsten tubes were used to quantify the surface porosity of the limestone. The results are expressed from four perspectives. The anatomy of Casa Ippolito, as revealed in its ruins, provides a cross-section of its building history and shows two distinct phases in its construction. The tissue of Casa Ippolito—the building elements and materials—speaks of the knowledge of raw materials and their properties among the builders who worked on both phases. The architectural history of Casa Ippolito reveals how it supported its inhabitants’ wellbeing in terms of shelter, water and food. Finally, the ruins in their present state bring to the fore the site’s potential for cultural tourism. This case study aims to show that such ruins are not just geocultural remains of historical built fabric. They are open wounds in the built structure; they underpin the anatomy of the building and support insights into its former dynamics. Ruins offer an essay in material culture and building physics. Architectural ruins of masonry structures are anthropogenic discourse rendered in stone which facilitate not only the reconstruction of spaces but also places for human users; they are a statement on the wellbeing of humanity throughout history.

Sign in / Sign up

Export Citation Format

Share Document