scholarly journals Pure and Sb-doped ZrO2 for removal of IO3− from radioactive waste solutions

2021 ◽  
Author(s):  
V. Suorsa ◽  
M. Otaki ◽  
J. Virkanen ◽  
R. Koivula
Keyword(s):  
High Mobility ◽  
Practical Applications ◽  
Zirconium Oxides ◽  
Effective Removal ◽  
Antimony Doping ◽  
Competing Anions ◽  
Single Method ◽  
Complicated Task ◽  
Competing Ions ◽  
Hydrous Zirconium

AbstractRadioactive 129I with a long half-life (1.57 × 107 y) and high mobility is a serious radiohazard and one of the top risk radionuclides associated with its accidental and planned releases to nature. The complex speciation chemistry of iodine makes its removal a complicated task, and usually a single method is not able to remove all iodine species. Especially its oxidized form iodate (IO3−) lacks a selective and effective removal method. Here, the granular aggregates of hydrous zirconium oxides with and without antimony doping were tested for IO3− removal and the effects of contact time, competing anions in different concentrations and pH were examined. The materials showed high selectivity for IO3− (Kd over up to 50,000 ml/g) in the presence of competing ions and relatively fast uptake kinetics (eq. < 1 h). However, B(OH)4− and SO42−, as competing ions, lowered the iodate uptake significantly in basic and acidic solution, respectively. The suitability of the materials for practical applications was tested in a series of column experiments where the materials showed remarkably high apparent capacity for the IO3− uptake (3.2–3.5 mmol/g). Graphic abstract

scholarly journals Phase Field Modelling of Abnormal Grain Growth

Materials ◽  
2019 ◽  
Vol 12 (24) ◽  
pp. 4048 ◽  
Author(s):  
Ying Liu ◽  
Matthias Militzer ◽  
Michel Perez
Keyword(s):  
Grain Growth ◽  
Phase Field ◽  
High Mobility ◽  
Abnormal Grain Growth ◽  
Critical Threshold ◽  
Polycrystalline Materials ◽  
Computational Techniques ◽  
Practical Applications ◽  
Field Modelling ◽  
Grain Structures

Heterogeneous grain structures may develop due to abnormal grain growth during processing of polycrystalline materials ranging from metals and alloys to ceramics. The phenomenon must be controlled in practical applications where typically homogeneous grain structures are desired. Recent advances in experimental and computational techniques have, thus, stimulated the need to revisit the underlying growth mechanisms. Here, phase field modelling is used to systematically evaluate conditions for initiation of abnormal grain growth. Grain boundaries are classified into two classes, i.e., high- and low-mobility boundaries. Three different approaches are considered for having high- and low-mobility boundaries: (i) critical threshold angle of grain boundary disorientation above which boundaries are highly mobile, (ii) two grain types A and B with the A–B boundaries being highly mobile, and (iii) three grain types, A, B and C with the A–B boundaries being fast. For these different scenarios, 2D simulations have been performed to quantify the effect of variations in the mobility ratio, threshold angle and fractions of grain types, respectively, on the potential onset of abnormal grain growth and the degree of heterogeneity in the resulting grain structures. The required mobility ratios to observe abnormal grain growth are quantified as a function of the fraction of high-mobility boundaries. The scenario with three grain types (A, B, C) has been identified as one that promotes strongly irregular abnormal grains including island grains, as observed experimentally.

scholarly journals A novel framework for bringing smart big data to proactive decision making in healthcare

2021 ◽  
Vol 27 (2) ◽  
pp. 146045822110246
Author(s):  
Shengyao Zhou ◽  
Runtong Zhang ◽  
Donghua Chen ◽  
Xiaomin Zhu
Keyword(s):  
Decision Making ◽  
Big Data ◽  
Human Life ◽  
Real Life ◽  
Data Driven ◽  
Practical Applications ◽  
Single Method ◽  
Fusion Analysis ◽  
Intelligent Healthcare ◽  
Medical And Healthcare

Big data have shown their great potential value to serve many aspects of human life. Due to complexity of the medical and healthcare big data in real life, traditional big data analysis methods are difficult to be dealt with. Therefore, a single method is unable to analyze and manage heterogeneous big data sources. To utilize data fully from the perspective of decision-making, we propose a novel framework which guides the healthcare big data to be smartly and proactively processed for decision-making without user interventions. The framework contains five stages, which are intelligent data cleaning, customized data fusion, analysis mapping, exploratory visualization analysis, and generation of decision-making reports. It also enables learning from the data and correlating them with the existing human knowledge. Subsequently, a smart big data-driven application exhibits innovative management in intelligent healthcare. The proposed framework provides the guidelines of the best practices of big data-driven analysis for intelligent healthcare according to our practical applications. The platform provides the appropriate reference for the big data-driven innovation of management in intelligent healthcare.

scholarly journals Charge Carrier Mediation and Ferromagnetism induced in MnBi6Te10 Magnetic Topological Insulators by antimony doping

2021 ◽  
Author(s):  
Hangkai Xie ◽  
Fucong Fei ◽  
Fenzhen Fang ◽  
Bo Chen ◽  
Jingwen Guo ◽  
...  
Keyword(s):  
Charge Carrier ◽  
Ground State ◽  
Topological Insulators ◽  
Quantum Effect ◽  
Magnetic Coupling ◽  
Anomalous Hall Effect ◽  
Practical Applications ◽  
Topological Quantum ◽  
Antimony Doping ◽  
High Carrier

Abstract A new kind of intrinsic magnetic topological insulators (MTI) MnBi2Te4 family have shed light on the observation of novel topological quantum effect such as quantum anomalous Hall effect (QAHE). However, the strong anti-ferromagnetic (AFM) coupling and high carrier concentration in the bulk hinder the practical applications. In closely related materials MnBi4Te7 and MnBi6Te10, the interlayer magnetic coupling is greatly suppressed by Bi2Te3 layer intercalation. However, AFM is still the ground state in these compounds. Here by magnetic and transport measurements, we demonstrate that Sb substitutional dopant plays a dual role in MnBi6Te10, which can not only adjust the charge carrier type and the concentration, but also induce the solid into a ferromagnetic (FM) ground state. AFM ground state region which is also close to the charge neutral point can be found in the phase diagram of Mn(SbxBi1-x)6Te10 when x ~ 0.25. An intrinsic FM-MTI candidate is thus demonstrated, and it may take a step further for the realization of high-quality and high-temperature QAHE and the related topological quantum effects in the future.

Ion Beam Induced Interfacial Reactions in Molybdenum Thin Films on Silicon

1981 ◽  
Vol 39 ◽  
pp. 162-163
Author(s):  
L. J. Chen ◽  
L. S. Hung ◽  
J. W. Mayer
Keyword(s):  
Ion Beam ◽  
Chemical Vapor ◽  
Interfacial Reactions ◽  
Practical Applications ◽  
Microelectronic Devices ◽  
Recent Emergence ◽  
Chemical Vapor Deposited ◽  
Atomic Mixing ◽  
Silicon Interface ◽  
Kinetics Of

When an energetic ion penetrates through an interface between a thin film (of species A) and a substrate (of species B), ion induced atomic mixing may result in an intermixed region (which contains A and B) near the interface. Most ion beam mixing experiments have been directed toward metal-silicon systems, silicide phases are generally obtained, and they are the same as those formed by thermal treatment.Recent emergence of silicide compound as contact material in silicon microelectronic devices is mainly due to the superiority of the silicide-silicon interface in terms of uniformity and thermal stability. It is of great interest to understand the kinetics of the interfacial reactions to provide insights into the nature of ion beam-solid interactions as well as to explore its practical applications in device technology.About 500 Å thick molybdenum was chemical vapor deposited in hydrogen ambient on (001) n-type silicon wafer with substrate temperature maintained at 650-700°C. Samples were supplied by D. M. Brown of General Electric Research & Development Laboratory, Schenectady, NY.

1250-kilovolt scanning transmission electron microscope

1984 ◽  
Vol 42 ◽  
pp. 624-625
Author(s):  
T. Imura ◽  
S. Maruse ◽  
K. Mihama ◽  
M. Iseki ◽  
M. Hibino ◽  
...  
Keyword(s):  
High Voltage ◽  
Electron Probe ◽  
Scanning Transmission Electron Microscope ◽  
Pressure Vessels ◽  
Practical Applications ◽  
Voltage Generator ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
New Applications ◽  
High Voltage Generator

Ultra high voltage STEM has many inherent technical advantages over CTEM. These advantages include better signal detectability and signal processing capability. It is hoped that it will explore some new applications which were previously not possible. Conventional STEM (including CTEM with STEM attachment), however, has been unable to provide these inherent advantages due to insufficient performance and engineering problems. Recently we have developed a new 1250 kV STEM and completed installation at Nagoya University in Japan. It has been designed to break through conventional engineering limitations and bring about theoretical advantage in practical applications.In the design of this instrument, we exercised maximum care in providing a stable electron probe. A high voltage generator and an accelerator are housed in two separate pressure vessels and they are connected with a high voltage resistor cable.(Fig. 1) This design minimized induction generated from the high voltage generator, which is a high frequency Cockcroft-Walton type, being transmitted to the electron probe.

Characterization of intergranular cuprous oxide in polycrystalline YBa2Cu3O7-x

1988 ◽  
Vol 46 ◽  
pp. 880-881
Author(s):  
Bradley L. Thiel ◽  
Chan Han R. P. ◽  
Kurosky L. C. Hutter ◽  
I. A. Aksay ◽  
Mehmet Sarikaya
Keyword(s):  
Grain Boundary ◽  
Cuprous Oxide ◽  
Room Temperature ◽  
Boundary Phase ◽  
Spectroscopic Techniques ◽  
Transition Width ◽  
Practical Applications ◽  
Thin Foils ◽  
Superconducting Oxides

The identification of extraneous phases is important in understanding of high Tc superconducting oxides. The spectroscopic techniques commonly used in determining the origin of superconductivity (such as RAMAN, XPS, AES, and EXAFS) are surface-sensitive. Hence a grain boundary phase several nanometers thick could produce irrelevant spectroscopic results and cause erroneous conclusions. The intergranular phases present a major technological consideration for practical applications. In this communication we report the identification of a Cu2O grain boundary phase which forms during the sintering of YBa2Cu3O7-x (1:2:3 compound).Samples are prepared using a mixture of Y2O3. CuO, and BaO2 powders dispersed in ethanol for complete mixing. The pellets pressed at 20,000 psi are heated to 950°C at a rate of 5°C per min, held for 1 hr, and cooled at 1°C per min to room temperature. The samples show a Tc of 91K with a transition width of 2K. In order to prevent damage, a low temperature stage is used in milling to prepare thin foils which are then observed, using a liquid nitrogen holder, in a Philips 430T at 300 kV.

Resolution and measurement in the scanning electron microscope

1987 ◽  
Vol 45 ◽  
pp. 534-537 ◽  
Author(s):  
Michael T. Postek
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Engineering Design ◽  
Resolving Power ◽  
Practical Applications ◽  
Instrument Resolution ◽  
Accurate Definition ◽  
Definition Of ◽  
Scanning Electron ◽  
Better Than

The term ultimate resolution or resolving power is the very best performance that can be obtained from a scanning electron microscope (SEM) given the optimum instrumental conditions and sample. However, as it relates to SEM users, the conventional definitions of this figure are ambiguous. The numbers quoted for the resolution of an instrument are not only theoretically derived, but are also verified through the direct measurement of images on micrographs. However, the samples commonly used for this purpose are specifically optimized for the measurement of instrument resolution and are most often not typical of the sample used in practical applications.SEM RESOLUTION. Some instruments resolve better than others either due to engineering design or other reasons. There is no definitively accurate definition of how to quantify instrument resolution and its measurement in the SEM.

In situ TEM Studies of agglomeration of sub-nanometer Ru layers in Ru/C multilayers

1992 ◽  
Vol 50 (1) ◽  
pp. 256-257
Author(s):  
Tai D. Nguyen ◽  
Ronald Gronsky ◽  
Jeffrey B. Kortright
Keyword(s):  
Layered Structure ◽  
Driving Force ◽  
High Energy ◽  
Superior Performance ◽  
In Situ Tem ◽  
Rayleigh Instability ◽  
Practical Applications ◽  
Transmission Electron ◽  
Diffraction Patterns

Nanometer period Ru/C multilayers are one of the prime candidates for normal incident reflecting mirrors at wavelengths < 10 nm. Superior performance, which requires uniform layers and smooth interfaces, and high stability of the layered structure under thermal loadings are some of the demands in practical applications. Previous studies however show that the Ru layers in the 2 nm period Ru/C multilayer agglomerate upon moderate annealing, and the layered structure is no longer retained. This agglomeration and crystallization of the Ru layers upon annealing to form almost spherical crystallites is a result of the reduction of surface or interfacial energy from die amorphous high energy non-equilibrium state of the as-prepared sample dirough diffusive arrangements of the atoms. Proposed models for mechanism of thin film agglomeration include one analogous to Rayleigh instability, and grain boundary grooving in polycrystalline films. These models however are not necessarily appropriate to explain for the agglomeration in the sub-nanometer amorphous Ru layers in Ru/C multilayers. The Ru-C phase diagram shows a wide miscible gap, which indicates the preference of phase separation between these two materials and provides an additional driving force for agglomeration. In this paper, we study the evolution of the microstructures and layered structure via in-situ Transmission Electron Microscopy (TEM), and attempt to determine the order of occurence of agglomeration and crystallization in the Ru layers by observing the diffraction patterns.

A New Detector System For The HB5 Stem Instrument

1985 ◽  
Vol 43 ◽  
pp. 134-135
Author(s):  
J.M. Cowley
Keyword(s):  
Dark Field ◽  
Detector System ◽  
Electron Holography ◽  
Small Specimen ◽  
Bright Field ◽  
Multiple Images ◽  
Practical Applications ◽  
Wide Range ◽  
Diffraction Patterns ◽  
Operational Modes

The HB5 STEM instrument at ASU has been modified previously to include an efficient two-dimensional detector incorporating an optical analyser device and also a digital system for the recording of multiple images. The detector system was built to explore a wide range of possibilities including in-line electron holography, the observation and recording of diffraction patterns from very small specimen regions (having diameters as small as 3Å) and the formation of both bright field and dark field images by detection of various portions of the diffraction pattern. Experience in the use of this system has shown that sane of its capabilities are unique and valuable. For other purposes it appears that, while the principles of the operational modes may be verified, the practical applications are limited by the details of the initial design.

Practical applications of scanning tunneling microscopy

1989 ◽  
Vol 47 ◽  
pp. 18-19
Author(s):  
D. R. Denley
Keyword(s):  
High Resolution ◽  
Scanning Tunneling Microscopy ◽  
Quantitative Information ◽  
Digital Data ◽  
Scanning Tunneling ◽  
Ambient Atmosphere ◽  
Tunneling Microscopy ◽  
Clear Trend ◽  
Practical Applications ◽  
Promising Tool

Scanning tunneling microscopy (STM) has recently been introduced as a promising tool for analyzing surface atomic structure. We have used STM for its extremely high resolution (especially the direction normal to surfaces) and its ability for imaging in ambient atmosphere. We have examined surfaces of metals, semiconductors, and molecules deposited on these materials to achieve atomic resolution in favorable cases.When the high resolution capability is coupled with digital data acquisition, it is simple to get quantitative information on surface texture. This is illustrated for the measurement of surface roughness of evaporated gold films as a function of deposition temperature and annealing time in Figure 1. These results show a clear trend for which the roughness, as well as the experimental deviance of the roughness is found to be minimal for evaporation at 300°C. It is also possible to contrast different measures of roughness.

Sign in / Sign up

Export Citation Format

Share Document