scholarly journals Probabilistic assessment of geothermal resources and their development in Dikili-İzmir region

2021 ◽  
Vol 3 (6) ◽  
Author(s):  
A. Turan ◽  
E. Artun ◽  
S. Saner
Keyword(s):  
Thermal Power ◽  
Electrical Power ◽  
Critical Parameters ◽  
Geothermal System ◽  
Geothermal Resources ◽  
Western Turkey ◽  
Reservoir Systems ◽  
Potential Benefits ◽  
Net Power Output ◽  
The Impact

AbstractDikili-Izmir Region (Western Turkey) has been an active area of development for the utilization of geothermal resources. In this study, we aim to quantify the untapped resource-potential in this region for both direct and indirect utilization purposes. After collecting geological data from the literature, probabilistic heat-in-place calculations are carried out. Yuntdağ Volcanites and Kozak Pluton are considered, and the latter is proposed as an enhanced geothermal system. It is shown that, with 50% probability, 75 MW$$_e$$ e and 17 MW$$_e$$ e of net electrical power can be produced from Yuntdağ and Kozak reservoir systems, respectively. When the unit volumes of reservoirs are considered, Kozak can produce 3.2 and 2.5 times of what Yuntdağ can produce in terms of electrical and thermal power, respectively. A sensitivity analysis is performed to understand the impact of reservoir characteristics on the reserves. Within the uncertainty ranges defined, reservoir size, temperature and recovery factor are found to be critical parameters that affect the net power output. Sustainability attributes are evaluated from both economic and environmental perspectives and potential benefits are discussed.

scholarly journals Aspects of the Chronology, Structure and Thermal History of the Kawerau Geothermal Field

2021 ◽  
Author(s):  
◽  
Sarah Dawn Milicich
Keyword(s):  
New Zealand ◽  
Hydrothermal Alteration ◽  
Electrical Power ◽  
Geothermal Field ◽  
Geothermal System ◽  
Hydrothermal Conditions ◽  
Geothermal Resources ◽  
Textural Characteristic ◽  
Structural Framework ◽  
Geological Conditions

<p>The development and management of high-temperature geothermal resources for electrical power generation requires accurate knowledge of the local geological conditions, particularly where they impact on the hydrology of the resource. This study is an integrated programme of work designed to develop new perspectives on the geological and structural framework of the Kawerau geothermal resource as a sound basis for field management. Although the geological approaches and techniques utilised in this study have previously been used, their application to an integrated study of a geothermal system in New Zealand has not been previously undertaken.  Correlating volcanic and sedimentary stratigraphy in geothermal areas in New Zealand can be challenging due to similarities in lithology and the destruction of distinctive chemical, mineralogical and textural characteristic by hydrothermal alteration. A means to overcoming these issues is to utilise dating to correlate the stratigraphy. Zircons are resistant to the effects of typical hydrothermal conditions and were dated using SIMS techniques (SHRIMP-RG) to retrieve U–Pb ages on zircons. These age data were then used to correlate units across the field, in part aided by correlations to material that had previously been dated from fresh rock by ⁴⁰Ar/³⁹Ar techniques, and used to redefine the stratigraphic framework for the area. [...]  Although previously inferred to be a long–lived system, the modern Kawerau Geothermal Field is a Holocene entity reflecting the rejuvenation of magmatic heat flux associated with Putauaki volcano superimposed on an area of multiple reactivated fault structures, sporadic magmatism and variable rates of subsidence. This study documents past patterns of fluid flow, temperatures and chemistry, and inferred permeability within the field. Using textural relationships in selected samples, the relative timing and patterns of hydrothermal alteration, and fluid flows can be established. These textural relationships are then calibrated against fluid inclusion palaeotemperature measurements and isotope data and related to temperatures and compositions of past fluids. Short–lived heat sources beneath the field resulted from local magma intrusions, and are responsible for the 0.36 Ma and 0.138 Ma rhyolites and Holocene eruptive activity of Putauaki andesite–dacite volcano. The Putauaki activity is inferred to be responsible for the thermal and alteration characteristics of the modern system.</p>

scholarly journals Aspects of the Chronology, Structure and Thermal History of the Kawerau Geothermal Field

2021 ◽  
Author(s):  
◽  
Sarah Dawn Milicich
Keyword(s):  
New Zealand ◽  
Hydrothermal Alteration ◽  
Electrical Power ◽  
Geothermal Field ◽  
Geothermal System ◽  
Hydrothermal Conditions ◽  
Geothermal Resources ◽  
Textural Characteristic ◽  
Structural Framework ◽  
Geological Conditions

<p>The development and management of high-temperature geothermal resources for electrical power generation requires accurate knowledge of the local geological conditions, particularly where they impact on the hydrology of the resource. This study is an integrated programme of work designed to develop new perspectives on the geological and structural framework of the Kawerau geothermal resource as a sound basis for field management. Although the geological approaches and techniques utilised in this study have previously been used, their application to an integrated study of a geothermal system in New Zealand has not been previously undertaken.  Correlating volcanic and sedimentary stratigraphy in geothermal areas in New Zealand can be challenging due to similarities in lithology and the destruction of distinctive chemical, mineralogical and textural characteristic by hydrothermal alteration. A means to overcoming these issues is to utilise dating to correlate the stratigraphy. Zircons are resistant to the effects of typical hydrothermal conditions and were dated using SIMS techniques (SHRIMP-RG) to retrieve U–Pb ages on zircons. These age data were then used to correlate units across the field, in part aided by correlations to material that had previously been dated from fresh rock by ⁴⁰Ar/³⁹Ar techniques, and used to redefine the stratigraphic framework for the area. [...]  Although previously inferred to be a long–lived system, the modern Kawerau Geothermal Field is a Holocene entity reflecting the rejuvenation of magmatic heat flux associated with Putauaki volcano superimposed on an area of multiple reactivated fault structures, sporadic magmatism and variable rates of subsidence. This study documents past patterns of fluid flow, temperatures and chemistry, and inferred permeability within the field. Using textural relationships in selected samples, the relative timing and patterns of hydrothermal alteration, and fluid flows can be established. These textural relationships are then calibrated against fluid inclusion palaeotemperature measurements and isotope data and related to temperatures and compositions of past fluids. Short–lived heat sources beneath the field resulted from local magma intrusions, and are responsible for the 0.36 Ma and 0.138 Ma rhyolites and Holocene eruptive activity of Putauaki andesite–dacite volcano. The Putauaki activity is inferred to be responsible for the thermal and alteration characteristics of the modern system.</p>

scholarly journals Potential Benefits Of Electricaly Driven Ferry, Case Study

2021 ◽  
Vol 93 (7s) ◽  
pp. 217-224
Author(s):  
Tina Perić ◽  
◽  
Ladislav Stazić ◽  
Karlo Bratić ◽  
Keyword(s):  
Diesel Engine ◽  
Electrical Power ◽  
Local Area ◽  
Exhaust Gas ◽  
Gas Emissions ◽  
Potential Benefits ◽  
The Moment ◽  
Exhaust Gas Emissions ◽  
The Impact

There have been several news articles in the newspapers lately about the introduction of electrically powered ferry boats in Croatia, especially on several shorter routes. This introduction will require serious investigation into potential benefits and also into potential drawbacks to determine if a solution is viable or not. One of those shorter ferry routes in Croatia is a route from peninsula Pelješac to the island of Korčula. The route at the moment is operated by one ferry, driven by four independent propellers, each driven by one diesel engine. This paper is addressing one small aspect of problems, assessing potential benefits of the conversion of a ferry (or replacement with electrically driven ferry) on the mentioned route to electrical power and the impact on the local area due to the reduction of all exhaust gas emissions.

POTENSI PENGEMBANGAN PEMBANGKIT LISTRIK PANASBUMI SUHU RENDAH DI KABUPATEN MANOKWARI SELATAN

2014 ◽  
Vol 13 (3) ◽  
Author(s):  
Agustinus Denny Unggul Raharjo
Keyword(s):  
Population Growth ◽  
Natural Resources ◽  
Geothermal System ◽  
Reservoir Temperature ◽  
Geothermal Resources ◽  
Autonomous Region ◽  
Electric Generator ◽  
Binary Cycle ◽  
West Papua ◽  
The Government

<p class="BodyA">South Manokwari Regency is a new autonomous region in West Papua Province with abundant natural resources. As a new autonomous region South Manokwari Regency will be experiencing significant population growth. Population growth along with development and modernization will give burden to electricity demand. Alternatively, electricity can be provided with geothermal resources in Momiwaren District. Based on survey conducted by the government through the Geology Resources Centre in 2009, the reservoir temperature of the geothermal sources is 84<sup>o</sup>C with non volcanic geothermal system. Thus, the geothermal resources in South Manokwari Regency could be developed into binary cycle electric generator.</p>

The Impact of Climate Change on Storage-Yield Curves for Multi-Reservoir Systems

1999 ◽  
Vol 30 (2) ◽  
pp. 129-146 ◽  
Author(s):  
N. R. Nawaz ◽  
A. J. Adeloye ◽  
M. Montaseri
Keyword(s):  
Climate Change ◽  
Surface Fluxes ◽  
Runoff Coefficient ◽  
Impact Study ◽  
Yield Functions ◽  
Reservoir Systems ◽  
English System ◽  
Multiple Reservoir ◽  
The Impact ◽  
Impacts Of Climate Change

In this paper, we report on the results of an investigation into the impacts of climate change on the storage-yield relationships for two multiple-reservoir systems, one in England and the other in Iran. The impact study uses established protocol and obtains perturbed monthly inflow series using a simple runoff coefficient approach which accounts for non-evaporative losses in the catchment, and a number of recently published GCM-based scenarios. The multi-reservoir analysis is based on the sequent-peak algorithm which has been modified to analyse multiple reservoirs and to accommodate explicitly performance norms and reservoir surface fluxes, i.e. evaporation and rainfall. As a consequence, it was also possible to assess the effect of including reservoir surface fluxes on the storage-yield functions. The results showed that, under baseline conditions, consideration of net evaporation will require lower storages for the English system and higher storages for the Iranian system. However, with perturbed hydroclimatology different impacts were obtained depending on the systems' yield and reliability. Possible explanations are offered for the observed behaviours.

scholarly journals Sustainable Modularity Approach to Facilities Development Based on Geothermal Energy Potential

2021 ◽  
Vol 11 (6) ◽  
pp. 2691
Author(s):  
Nataša Ćuković Ignjatović ◽  
Ana Vranješ ◽  
Dušan Ignjatović ◽  
Dejan Milenić ◽  
Olivera Krunić
Keyword(s):  
Geothermal Energy ◽  
Architectural Design ◽  
Pannonian Basin ◽  
Thermal Power ◽  
Chemical Compositions ◽  
Energy Potential ◽  
Southeastern Part ◽  
Geothermal Resources ◽  
Heating And Cooling ◽  
Different Temperatures

The study presented in this paper assessed the multidisciplinary approach of geothermal potential in the area of the most southeastern part of the Pannonian basin, focused on resources utilization. This study aims to present a method for the cascade use of geothermal energy as a source of thermal energy for space heating and cooling and as a resource for balneological purposes. Two particular sites were selected—one in a natural environment; the other within a small settlement. Geothermal resources come from different types of reservoirs having different temperatures and chemical compositions. At the first site, a geothermal spring with a temperature of 20.5 °C is considered for heat pump utilization, while at the second site, a geothermal well with a temperature of 54 °C is suitable for direct use. The calculated thermal power, which can be obtained from geothermal energy is in the range of 300 to 950 kW. The development concept was proposed with an architectural design to enable sustainable energy efficient development of wellness and spa/medical facilities that can be supported by local authorities. The resulting energy heating needs for different scenarios were 16–105 kW, which can be met in full by the use of geothermal energy.

scholarly journals Investigation of the Impact of Large-Scale Integration of Electric Vehicles for a Swedish Distribution Network

Energies ◽  
2019 ◽  
Vol 12 (24) ◽  
pp. 4717 ◽  
Author(s):  
Sylvester Johansson ◽  
Jonas Persson ◽  
Stavros Lazarou ◽  
Andreas Theocharis
Keyword(s):  
Electric Vehicles ◽  
Power Distribution ◽  
Large Scale ◽  
Electrical Power ◽  
Distribution Network ◽  
Transport Sector ◽  
Smart Charging ◽  
Large Scale Integration ◽  
Scale Integration ◽  
The Impact

Social considerations for a sustainable future lead to market demands for electromobility. Hence, electrical power distribution operators are concerned about the real ongoing problem of the electrification of the transport sector. In this regard, the paper aims to investigate the large-scale integration of electric vehicles in a Swedish distribution network. To this end, the integration pattern is taken into consideration as appears in the literature for other countries and applies to the Swedish culture. Moreover, different charging power levels including smart charging techniques are examined for several percentages of electric vehicles penetration. Industrial simulation tools proven for their accuracy are used for the study. The results indicate that the grid can manage about 50% electric vehicles penetration at its current capacity. This percentage decreases when higher charging power levels apply, while the transformers appear overloaded in many cases. The investigation of alternatives to increase the grid’s capabilities reveal that smart techniques are comparable to the conventional re-dimension of the grid. At present, the increased integration of electric vehicles is manageable by implementing a combination of smart gird and upgrade investments in comparison to technically expensive alternatives based on grid digitalization and algorithms that need to be further confirmed for their reliability for power sharing and energy management.

scholarly journals A Stochastic Optimal Control Approach for Power Management in Plug-In Hybrid Electric Vehicles

2008 ◽  
Author(s):  
Scott J. Moura ◽  
Hosam K. Fathy ◽  
Duncan S. Callaway ◽  
Jeffrey L. Stein
Keyword(s):  
Power Management ◽  
Hybrid Electric Vehicle ◽  
Single Mode ◽  
Stochastic Dynamic ◽  
Electricity Pricing ◽  
Control Approach ◽  
Potential Benefits ◽  
Hybrid Electric ◽  
The Impact ◽  
Charge Depletion

This paper examines the problem of optimally splitting driver power demand among the different actuators (i.e., the engine and electric machines) in a plug-in hybrid electric vehicle (PHEV). Existing studies focus mostly on optimizing PHEV power management for fuel economy, subject to charge sustenance constraints, over individual drive cycles. This paper adds three original contributions to this literature. First, it uses stochastic dynamic programming to optimize PHEV power management over a distribution of drive cycles, rather than a single cycle. Second, it explicitly trades off fuel and electricity usage in a PHEV, thereby systematically exploring the potential benefits of controlled charge depletion over aggressive charge depletion followed by charge sustenance. Finally, it examines the impact of variations in relative fuel-to-electricity pricing on optimal PHEV power management. The paper focuses on a single-mode powersplit PHEV configuration for mid-size sedans, but its approach is extendible to other configurations and sizes as well.

Low Temperature Pre-Epi Treatment: Critical Parameters to Control Interface Contamination

2009 ◽  
Vol 145-146 ◽  
pp. 177-180 ◽  
Author(s):  
Roger Loo ◽  
Andriy Hikavyy ◽  
Frederik E. Leys ◽  
Masayuki Wada ◽  
Kenichi Sano ◽  
...  
Keyword(s):  
Low Temperature ◽  
Sige Layer ◽  
Ex Situ ◽  
Critical Parameters ◽  
Process Equipment ◽  
Successful Implementation ◽  
Lifetime Measurements ◽  
Deposition Processes ◽  
Cleaning Methods ◽  
The Impact

Several device concepts have been further evaluated after the successful implementation of epitaxial Si, SiGe and/or Si:C layers. Most of the next device generations will put limitations on the thermal budget of the deposition processes without making concessions on the epitaxial layer quality. In this work we address the impact of ex-situ wet chemical cleans and in-situ pre-epi bake steps, which are required to obtain oxide free Si surfaces for epitaxial growth. The combination of defect measurements, Secondary Ion Mass Spectroscopy, photoluminescence, lifetime measurements, and electrical diode characterization gives a very complete overview of the performance of low-temperature pre-epi cleaning methods. Contamination at the epi/substrate interface cannot be avoided if the pre-epi bake temperature is too low. This interface contamination is traceable by the photoluminescence and lifetime measurements. It may affect device characteristics by enhanced leakage currents and eventually by yield issues due to SiGe layer relaxation or other defect generation. A comparison of state of the art 200 mm and 300 mm process equipment indicates that for the same thermal budgets the lowest contamination levels are obtained for the 300 mm equipments.

scholarly journals Damping Studies on PMLG-Based Wave Energy Converter under Oceanic Wave Climates

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 920
Author(s):  
Yue Hong ◽  
Irina Temiz ◽  
Jianfei Pan ◽  
Mikael Eriksson ◽  
Cecilia Boström
Keyword(s):  
Wave Energy ◽  
Energy Production ◽  
Full Range ◽  
Electrical Power ◽  
Damping Coefficient ◽  
Irregular Wave ◽  
Ocean Wave Energy ◽  
Optimal Damping ◽  
The Impact

Wave energy converters (WECs), which are designed to harvest ocean wave energy, have recently been improved by the installation of numerous conversion mechanisms; however, it is still difficult to find an appropriate method that can compromise between strong environmental impact and robust performance by transforming irregular wave energy into stable electrical power. To solve this problem, an investigation into the impact of varied wave conditions on the dynamics of WECs and to determine an optimal factor for WECs to comply with long-term impacts was performed. In this work, we researched the performance of WECs influenced by wave climates. We used a permanent magnet linear generator (PMLG)-based WEC that was invented at Uppsala University. The damping effect was first studied with a PMLG-type WEC. Then, a group of sea states was selected to investigate their impact on the power production of the WEC. Two research sites were chosen to investigate the WEC’s annual energy production as well as a study on the optimal damping coefficient impact. In addition, we compared the WEC’s energy production between optimal damping and constant damping under a full range of sea states at both sites. Our results show that there is an optimal damping coefficient that can achieve the WEC’s maximum power output. For the chosen research sites, only a few optimal damping coefficients were able to contribute over 90% of the WEC’s annual energy production. In light of the comparison between optimal and constant damping, we conclude that, for specific regions, constant damping might be a better choice for WECs to optimize long-term energy production.

Sign in / Sign up

Export Citation Format

Share Document