THE PLANT BREEDING POTENTIAL OF GENETIC VARIATION IN CEREAL PHYTOHORMONE SYSTEMS

Author(s):  
M.D. GALE ◽  
P.R. HANSON
2021 ◽  
Vol 9 ◽  
Author(s):  
Heather R. Kates ◽  
Fernando López Anido ◽  
Guillermo Sánchez-de la Vega ◽  
Luis E. Eguiarte ◽  
Pamela S. Soltis ◽  
...  

Studies of domestication genetics enrich our understanding of how domestication shapes genetic and morphological diversity. We characterized patterns of genetic variation in two independently domesticated pumpkins and their wild progenitors to assess and compare genetic consequences of domestication. To compare genetic diversity pre- and post-domestication and to identify genes targeted by selection during domestication, we analyzed ∼15,000 SNPs of 48 unrelated accessions, including wild, landrace, and improved lines for each of two pumpkin species, Cucurbita argyrosperma and Cucurbita maxima. Genetic diversity relative to its wild progenitor was reduced in only one domesticated subspecies, C. argyrosperma ssp. argyrosperma. The two species have different patterns of genetic structure across domestication status. Only 1.5% of the domestication features identified for both species were shared between species. These findings suggest that ancestral genetic diversity, wild-crop gene flow, and domestication practices shaped the genetic diversity of two similar Cucurbita crops in different ways, adding to our understanding of how genetic diversity changes during the processes of domestication and how trait improvement impacts the breeding potential of modern crops.


1970 ◽  
Vol 75 (1) ◽  
pp. 159-167 ◽  
Author(s):  
A. J. Thomson ◽  
H. H. Rogers

SUMMARYFive selected clones of Lolium perenne were selfed and the ten possible diallel crosses, without reciprocals, made. The progenies were grown in a split-plot design in which whole plots comprised the four nitrogen rates (0, 225, 450 and 675 kg/ha of N) and sub-plots the fifteen progenies, square planted at 0·25 m.The percentage of the applied nitrogen recovered, and the utilization of the nitrogen by the plant, were measured. Data were collected from four harvests in each of two consecutive years. The diallel was analysed by Griffing's (1956) Method II, Model II.There were significant effects for nitrogen rates, progenies and their interaction for both ‘recovery’ and ‘utilization’, but years were significantly different for ‘recovery’ only. The effect of applied nitrogen was mainly linear and it was the linear effect of applied nitrogen which interacted most with the progeny effects.Significant g.c.a. and s.c.a. effects were found but they varied between nitrogen rates and years. For ‘utilization’ the interaction nitrogen rates x g.c.a. was significant on two year means but there was no significance for the nitrogen interaction with s.c.a. The g.c.a. values obtained for both parameters did reveal some trends between the five parents.The presence of significant additive and non-additive genetic variation is discussed in relation to a plant breeding programme.


Author(s):  
Nathaniel Schleif ◽  
Shawn M. Kaeppler ◽  
Heidi F. Kaeppler

AbstractPlant breeding relies on the presence of genetic variation, which is generated by a random process of mutagenesis that acts on existing gene pools. This variation is then recombined into new forms at frequencies impacted by the local euchromatin and heterochromatin environment. The result is a genetic lottery where plant breeders face increasingly low odds of generating a “winning” plant genotype. Genome editing tools enable targeted manipulation of the genome, providing a means to increase genetic variation and enhancing the chances for plant breeding success. Editing can be applied in a targeted way, where known genetic variation that improves performance can be directly brought into lines of interest through either deletion or insertion. This empowers approaches that are traditionally difficult such as novel domestication and introgression of wild accessions into a germplasm pool. Furthermore, broader editing-mediated approaches such as recombination enhancement and targeted random mutagenesis bring novel ways of variation creation to the plant breeding toolbox. Continued development and application of plant genome editing tools will be needed to aid in meeting critical global crop improvement needs.


Author(s):  
Indah Anita Sari ◽  
Bayu Setyawan ◽  
Marcelinus A.S. Adhiwibawa ◽  
Agung Wahyu Susilo

A problem encountered in plant breeding process to determine bean color quality of fine-flavor cocoa is a long selection period. Preliminary results indicatedthat the fine-flavor cocoa has a low color reflectance than bulk cocoa. The objectiveof this study is to find more applicable and easier method to do the early detectionof fine-flavor cocoa on the breeding population. Detection of the leaf color haracteristics was done by chromatographic and spectrophotometry analysis. hromatographic analysis was carried out in Kaliwining Experimental Station, IndonesianCoffee and Cocoa Research Institute using complete random design consistedof two types of cocoa; fine-flavor (10 clones) and bulk cocoa (10 clones). pectrophotometric analysis was conducted at Ma Chung University, Malang, East Java.Four clones of bulk cocoa and six clones of fine flavor cocoa were used in thisanalysis. The results of the study showed that the flush color characteristics of thefine-flavor cocoa were different from the bulk cocoa characteristics as shown bythe differences in the value of L*, b* and anthocyanin content. Flush characteristic s ofthe fine-flavor cocoa had brighter color, more toward green with higher yellowlevel, while the bulk cocoa had darker flush, red and lower yellow level. Thecolor parameter of L* and b* had a higher genetic variation compared with theenvironment variation. However, the parameter a* had a higher environmental variation compared with genetic variation. Grouping of fine-flavor cocoa and bulk cocoacould be done through the detection of flush anthocyanin content, when tendencyof flush anthocyanin content on fine-flavor cocoa was lower than bulk cocoa.The detection of flush color particularly L* and b* parameters through hromatographic analysis and anthocyanin content through spectrophotometric analysismay be used as a criteria for selection the fine flavor cocoa on seedling phase.


2022 ◽  
Author(s):  
Irene S. Breider ◽  
R. Chris Gaynor ◽  
Gregor Gorjanc ◽  
Steve Thorn ◽  
Manish K. Pandey ◽  
...  

Abstract Some of the most economically important traits in plant breeding show highly polygenic inheritance. Genetic variation is a key determinant of the rates of genetic improvement in selective breeding programs. Rapid progress in genetic improvement comes at the cost of a rapid loss of genetic variation. Germplasm available through expired Plant Variety Protection (exPVP) lines is a potential resource of variation previously lost in elite breeding programs. Introgression for polygenic traits is challenging, as many genes have a small effect on the trait of interest. Here we propose a way to overcome these challenges with a multi-part pre-breeding program that has feedback pathways to optimise recurrent genomic selection. The multi-part breeding program consists of three components, namely a bridging component, population improvement, and product development. Parameters influencing the multi-part program were optimised with the use of a grid search. Haploblock effect and origin were investigated. Results showed that the introgression of exPVP germplasm using an optimised multi-part breeding strategy resulted in 1.53 times higher genetic gain compared to a two-part breeding program. Higher gain was achieved through reducing the performance gap between exPVP and elite germplasm and breaking down linkage drag. Both first and subsequent introgression events showed to be successful. In conclusion, the multi-part breeding strategy has a potential to improve long-term genetic gain for polygenic traits and therefore, potential to contribute to global food security.


2011 ◽  
Vol 15 ◽  
pp. 139-147 ◽  
Author(s):  
H.S. Easton ◽  
A.V. Stewart ◽  
G.A. Kerr

The suggestion that modern pasture cultivars persist less well than their predecessors is not supported by facts. However in some regions there is a crisis in farmer experience of persistence of ryegrass pastures, and ryegrass breeding can contribute to a resolution. This paper considers the turnover of tillers in a pasture, the population structure of a grass sward and the involvement of endophyte and companion clover. Knowledge gaps in key processes of pasture persistence are discussed. The plant breeding process involves access to relevant genetic variation, its assessment, and creation of improved populations and eventually cultivars based on selected superior plants. All these scientific processes use ever-evolving techniques. Breeding objectives evolve with industry needs and the changing environment. The methods employed in the breeding phases, the breeding objectives and the final evaluation of cultivars require ongoing revision. Plant breeding will make a growing contribution to modern farming if its developing capabilities are interfaced with other research disciplines providing critical information on key pasture processes. Keywords: Lolium perenne, endophyte, persistence, tillering


Author(s):  
M Cooper ◽  
O Powell ◽  
K P Voss-Fels ◽  
C D Messina ◽  
C Gho ◽  
...  

Abstract Plant breeding programs are designed and operated over multiple cycles to systematically change the genetic makeup of plants to achieve improved trait performance for a Target Population of Environments (TPE). Within each cycle, selection applied to the standing genetic variation within a structured reference population of genotypes (RPG) is the primary mechanism by which breeding programs make the desired genetic changes. Selection operates to change the frequencies of the alleles of the genes controlling trait variation within the RPG. The structure of the RPG and the TPE has important implications for the design of optimal breeding strategies. The breeder’s equation, together with the quantitative genetic theory behind the equation, informs many of the principles for design of breeding programs. The breeder’s equation can take many forms depending on the details of the breeding strategy. Through the genetic changes achieved by selection, the cultivated varieties of crops (cultivars) are improved for use in agriculture. From a breeding perspective, selection for specific trait combinations requires a quantitative link between the effects of the alleles of the genes impacted by selection and the trait phenotypes of plants and their breeding value. This gene-to-phenotype link function provides the G2P map for one to many traits. For complex traits controlled by many genes, the infinitesimal model for trait genetic variation is the dominant G2P model of quantitative genetics. Here we consider motivations and potential benefits of using the hierarchical structure of crop models as CGM-G2P trait link functions in combination with the infinitesimal model for the design and optimisation of selection in breeding programs.


Plant protoplasts of several horticultural and crop species can now be readily regenerated into plants. There are now available several opportunities for their use in the manipulation of genetic systems in plant breeding. Protoplast cloning has recently been shown to produce additional genetic variation in potatoes; the possibility is examined for protoplast cloning of seed producing crop species for new genetic variation. Fusion of protoplasts of different species is now providing an additional method of hybridization; sexually incompatible species can be hybridized and horticulturally useful hybrids are now being produced. Many possibilities exist for hybridization assessments, both nuclear and cytoplasmic, between various crop species; however, the extent to which these wider hybridizations will produce useful genetic variation is not yet clear, and in many instances plant regeneration from these cultured cell hybrids is not yet possible. Plant protoplasts are also providing an opportunity for the transfer of genes between different species. This may be by fusion with an irradiated protoplast system, or by direct transformation. Transfer of genes by using Agrobacterium plasmid as a vector system appears promising, and fusions with wild-type protoplasts will ensure the regeneration of non-tumorous plants.


2020 ◽  
Author(s):  
Ramswaroop Saini ◽  
Amit Kumar Singh ◽  
Geoffrey J. Hyde ◽  
Ramamurthy Baskar

AbstractCrossing over, the exchange of DNA between the chromosomes during meiosis, contributes significantly to genetic variation. The rate of crossovers (CO) varies depending upon the taxon, population, age, external conditions, and also, sometimes, between the sexes, a phenomenon called heterochiasmy. In the model plant Arabidopsis thaliana, the male rate of crossovers (mCO) is typically nearly double the female rate (fCO). With increasing parental age, it has been reported that the disparity decreases, because fCO rises while mCO remains stable. That finding, however, is based on chromosome-based averaging, and it is unclear whether all parts of the genome respond similarly. We addressed this point by examining how the level of heterochiasmy responded to parental age in eight genomic intervals distributed across the five chromosomes of Arabidopsis. Unlike the previous work, in each of the eight intervals, the level of heterochiasmy did not change with age, that is, the ratio mCO:fCO remained stable. As expected, though, amongst the intervals, the levels of heterochiasmy at any of the four ages examined, did vary. We propose that while the levels of heterochiasmy in Arabidopis might decrease with age on a chromosomal basis, as reported earlier, this is not true for all locations within each chromosome. This has practical implications for plant breeding research, a major aim of which is identifying ways to induce local increases in CO rates.


Sign in / Sign up

Export Citation Format

Share Document