Cellulose-glycerol-polyvinyl alcohol composite films for food packaging: Evaluation of water adsorption, mechanical properties, light-barrier properties and transparency

2018 ◽  
Vol 195 ◽  
pp. 432-443 ◽  
Author(s):  
Patricia Cazón ◽  
Manuel Vázquez ◽  
Gonzalo Velazquez
Keyword(s):  
Mechanical Properties ◽  
Polyvinyl Alcohol ◽  
Food Packaging ◽  
Water Adsorption ◽  
Composite Films ◽  
Barrier Properties ◽  
Light Barrier

scholarly journals Preparation and Properties of Cyanobacteria-Based Carbon Quantum Dots/Polyvinyl Alcohol/ Nanocellulose Composite

Polymers ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 1143 ◽  
Author(s):  
Li Xu ◽  
Ying Li ◽  
Shiyu Gao ◽  
Yue Niu ◽  
Huaxuan Liu ◽  
...  
Keyword(s):  
Quantum Dots ◽  
Polyvinyl Alcohol ◽  
Water Resistance ◽  
Composite Films ◽  
Barrier Properties ◽  
Carbon Quantum Dots ◽  
Infrared Light ◽  
Quantum Yields ◽  
Hydroxyl Groups ◽  
Light Barrier

Blue luminescent carbon quantum dots (CQDs) were prepared from cyanobacteria by a hydrothermal method. The PL quantum yields of the obtained CQDs was 5.30%. Cyanobacteria-based carbon quantum dots/polyvinyl alcohol/nanocellulose composite films were prepared, which could emit bright blue under UV light. FTIR characterization showed that the composite films had hydroxyl groups on the surface and no new groups were formed after combining the three materials. The photoluminescence (PL) spectra revealed that the emission of the prepared CQDs was excitation dependent. Studies on the water resistance performance and light barrier properties of the composite films showed that they possessed higher water resistance properties and better UV/infrared light barrier properties. Therefore, we report the cyanobacteria-based carbon quantum dots/polyvinyl alcohol/nanocellulose composite films have the potential to be applied in flexible packaging materials, anti-fake materials, UV/infrared light barrier materials and so on.

scholarly journals Understanding the Barrier and Mechanical Behavior of Different Nanofillers in Chitosan Films for Food Packaging

Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 721 ◽  
Author(s):  
João Pires ◽  
Camila Damásio de Paula ◽  
Victor Gomes Lauriano Souza ◽  
Ana Luísa Fernando ◽  
Isabel Coelhoso
Keyword(s):  
Mechanical Properties ◽  
Mechanical Behavior ◽  
Food Packaging ◽  
Scientific Research ◽  
Barrier Properties ◽  
Plastic Pollution ◽  
Functional Attributes ◽  
Chitosan Films ◽  
Commercial Applications ◽  
Innovative Techniques

The continuous petroleum-based plastics manufacturing generates disposal issues, spreading the problem of plastic pollution and its rise in the environment. Recently, innovative techniques and scientific research promoted biopolymers as the primary alternative for traditional plastics, raising and expanding global bioplastic production. Due to its unmatched biological and functional attributes, chitosan (Ch) has been substantially explored and employed as a biopolymeric matrix. Nevertheless, the hydrophilicity and the weak mechanical properties associated with this biopolymer represent a significant intrinsic restriction to its implementation into some commercial applications, namely, in food packaging industries. Distinct methodologies have been utilized to upgrade the mechanical and barrier properties of Ch, such as using organic or inorganic nanofillers, crosslinkers, or blends with other polymers. This review intends to analyze the most recent works that combine the action of different nanoparticle types with Ch films to reinforce their mechanical and barrier properties.

Enhanced functional properties of biodegradable Polyvinyl alcohol /carboxymethyl cellulose (PVA/CMC) composite films reinforced with L-alanine surface modified CuO nanorods

2021 ◽  
Author(s):  
Yamanappagouda Amaregouda ◽  
Kantharaju Kamanna ◽  
Tilak Gasti ◽  
Vijay Kumbar
Keyword(s):  
Polyvinyl Alcohol ◽  
Carboxymethyl Cellulose ◽  
Food Packaging ◽  
Composite Films ◽  
Nanocomposite Films ◽  
Soil Burial ◽  
High Antibacterial Activity ◽  
Active Food Packaging ◽  
Surface Modified ◽  
Cuo Nanorods

Abstract Herein, we described novel biogenic preparation of the CuO nanorods and its surface modification with L-alanine amino acid accelerated by microwave irradiation. The effect of surface functionalized CuO nanorods on the polyvinyl alcohol/carboxymethyl cellulose film physico-mechanical properties were investigated through various characterization techniques. The tensile strength was improved from 28.58 ± 0.73 MPa to 43.40 ± 0.93 MPa, UV shielding ability and barrier to the water vapors were highly enhanced when PVA/CMC matrices filled with 8 wt% of CuO-L-alanine. In addition, the prepared films exhibited acceptable overall migration limit and readily undergoes soil burial degradation. Nevertheless, CuO-L-alanine incorporated films showed potent antioxidant activity against DPPH radicals and had high antibacterial activity against Staphylococcus aureus and Escherichia coli, and antifungal activity against Candida albicans and Candida tropicalis. Furthermore, the nanocomposite films showed negligible cytotoxic effect on HEK293 and Caco-2 cell lines. In these contexts, the developed nanocomposite films can be implementing as an active food packaging material.

scholarly journals Effect of High Pressure Treatment on Poly(lactic acid)/Nano–TiO2 Composite Films

Molecules ◽  
2018 ◽  
Vol 23 (10) ◽  
pp. 2621 ◽  
Author(s):  
Hai Chi ◽  
Wenhui Li ◽  
Chunli Fan ◽  
Cheng Zhang ◽  
Lin Li ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
High Pressure ◽  
Lactic Acid ◽  
Composite Film ◽  
Composite Films ◽  
Barrier Properties ◽  
Poly Lactic Acid ◽  
Pressure Treatment ◽  
Nano Tio2 ◽  
High Pressure Treatment

The microstructure, thermal properties, mechanical properties and oxygen and water vapor barrier properties of a poly(lactic acid) (PLA)/nano-TiO2 composite film before and after high pressure treatment were studied. Structural analysis showed that the functional group structure of the high pressure treated composite film did not change. It was found that the high pressure treatment did not form new chemical bonds between the nanoparticles and the PLA. The micro-section of the composite film after high pressure treatment became very rough, and the structure was depressed. Through the analysis of thermal and mechanical properties, high pressure treatment can not only increase the strength and stiffness of the composite film, but also increase the crystallinity of the composite film. Through the analysis of barrier properties, it is found that the barrier properties of composite films after high pressure treatment were been improved by the applied high pressure treatment.

scholarly journals Hybrid Biocomposites Based on Poly(Lactic Acid) and Silica Aerogel for Food Packaging Applications

Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 4910 ◽  
Author(s):  
Alejandro Aragón-Gutierrez ◽  
Marina P. Arrieta ◽  
Mar López-González ◽  
Marta Fernández-García ◽  
Daniel López
Keyword(s):  
Thermal Stability ◽  
Lactic Acid ◽  
Silica Aerogel ◽  
Food Packaging ◽  
Mechanical Performance ◽  
Composite Films ◽  
Barrier Properties ◽  
Extrusion Process ◽  
Poly Lactic Acid ◽  
Barrier Performance

Bionanocomposites based on poly (lactic acid) (PLA) and silica aerogel (SiA) were developed by means of melt extrusion process. PLA-SiA composite films were plasticized with 15 wt.% of acetyl (tributyl citrate) (ATBC) to facilitate the PLA processability as well as to attain flexible polymeric formulations for films for food packaging purposes. Meanwhile, SiA was added in four different proportions (0.5, 1, 3 and 5 wt.%) to evaluate the ability of SiA to improve the thermal, mechanical, and barrier performance of the bionanocomposites. The mechanical performance, thermal stability as well as the barrier properties against different gases (carbon dioxide, nitrogen, and oxygen) of the bionanocomposites were evaluated. It was observed that the addition of 3 wt.% of SiA to the plasticized PLA-ATBC matrix showed simultaneously an improvement on the thermal stability as well as the mechanical and barrier performance of films. Finally, PLA-SiA film formulations were disintegrated in compost at the lab-scale level. The combination of ATBC and SiA sped up the disintegration of PLA matrix. Thus, the bionanocomposites produced here show great potential as sustainable polymeric formulations with interest in the food packaging sector.

scholarly journals Preparation and Characterization of Carboxymethyl Cellulose-Based Bioactive Composite Films Modified with Fungal Melanin and Carvacrol

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 499
Author(s):  
Łukasz Łopusiewicz ◽  
Paweł Kwiatkowski ◽  
Emilia Drozłowska ◽  
Paulina Trocer ◽  
Mateusz Kostek ◽  
...  
Keyword(s):  
Water Vapour ◽  
Carboxymethyl Cellulose ◽  
Food Packaging ◽  
Antioxidant Activities ◽  
Antioxidant Properties ◽  
Composite Films ◽  
Barrier Properties ◽  
Good Potential ◽  
Fungal Melanin ◽  
Spectroscopy Studies

Preparation of biodegradable packaging materials and valorisation of food industry residues to achieve “zero waste” goals is still a major challenge. Herein, biopolymer-based (carboxymethyl cellulose—CMC) bioactive films were prepared by the addition, alone or in combination, of carvacrol and fungal melanin isolated from champignon mushroom (Agaricus bisporus) agro-industrial residues. The mechanical, optical, thermal, water vapour, and UV-Vis barrier properties were studied. Fourier-transform infrared (FT-IR) spectroscopy studies were carried out to analyse the chemical composition of the resulting films. Antibacterial, antifungal, and antioxidant activities were also determined. Both CMC/melanin and CMC/melanin/carvacrol films showed some antimicrobial activity against Escherichia coli, Staphylococcus aureus, and Candida albicans. The addition of melanin increased the UV-blocking, mechanical, water vapour barrier, and antioxidant properties without substantially reducing the transparency of the films. The addition of carvacrol caused loss of transparency, however, composite CMC/melanin/carvacrol films showed excellent antioxidant activity and enhanced mechanical strength. The developed bioactive biopolymer films have a good potential to be green bioactive alternatives to plastic films in food packaging applications.

scholarly journals Mechanical Properties of Thermoplastic Starch Biocomposite Films with Hybrid Fillers

2021 ◽  
Vol 2080 (1) ◽  
pp. 012011
Author(s):  
Di Sheng Lai ◽  
Sinar Arzuria Adnan ◽  
Azlin Fazlina Osman ◽  
Ismail Ibrahim ◽  
Hazrul Haq
Keyword(s):  
Mechanical Properties ◽  
Food Packaging ◽  
Corn Starch ◽  
Composite Films ◽  
Thermoplastic Starch ◽  
Elongation At Break ◽  
Biocomposite Films ◽  
Hybrid Fillers ◽  
The Matrix ◽  
Dry Food

Abstract Thermoplastic starch (TPS) was studied extensively to replace conventional plastic in packaging application. In this study, granule corn starch was first plasticized with water and glycerol to form TPS films and two different fillers were incorporated with TPS to form hybrid biocomposite films (TPSB). Two different fillers: Microcrystalline cellulose (MC) and Nano bentonite (NB) fixed at 1: 4 ratios in various loading (1wt%-6wt%) were incorporated in TPS to study effect of hybrid fillers on the mechanical properties of TPSB films. The effect of different loading of MC/NB on TPSB films was investigated through the structural, morphological and mechanical testing. Fourier Transform Infrared Spectroscopy (FTIR) shows TPS matrix and hybrid fillers are highly compatible due to hydroxyl bonding and verified through the shifting of spectra band. Scanning Electron Microscope (SEM) showed even distribution of fillers in the matrix of TPS. The TPSB films exhibited significant improvement 40% in elongation at break compared to pure TPS films. In this study, 5wt% is best loading of the hybrid fillers to incorporated in TPSB films as it achieved the highest value of tensile strength (8.52MPa), Young’s Modulus (42.0 MPa) and elongation at break (116.3%). Generally, previous studies showed flexibility of TPS composite films reduced with incorporating filler, however in this study, the flexibility TPSB show significant improvement compared to previous studies and exhibit promising potential in dry food packaging application.

scholarly journals Design of Novel PLA/OMMT Films with Improved Gas Barrier and Mechanical Properties by Intercalating OMMT Interlayer with High Gas Barrier Polymers

Polymers ◽  
2021 ◽  
Vol 13 (22) ◽  
pp. 3962
Author(s):  
Abdul Shakoor Shar ◽  
Caili Zhang ◽  
Xieqing Song ◽  
Yunxuan Weng ◽  
Qiuyue Du
Keyword(s):  
Mechanical Properties ◽  
Vinyl Alcohol ◽  
Composite Films ◽  
Barrier Properties ◽  
Poly Vinyl Alcohol ◽  
Diffraction Measurement ◽  
Scanning Calorimetry ◽  
Gas Barrier ◽  
Ethylene Vinyl Alcohol ◽  
Barrier Polymers

Polymer/clay composites are an innovative class of materials. In this study, we present a facile method for the preparation of biodegradable and robust PLA/organomodified montmorillonite (OMMT) composite films with excellent gas barrier performance. When the design of PLA/OMMT composite films, in addition to making OMMT have good intercalation effect in the matrix, the compatibility of intercalating polymer and matrix should also be considered. In this work, two polymers with high gas barrier properties, namely poly(vinyl alcohol) (PVA) and ethylene vinyl alcohol copolymer (EVOH), were selected to intercalate OMMT. The morphology and microstructures of the prepared PLA/PVA/OMMT and PLA/EVOH/OMMT composites were characterized by the X-ray diffraction measurement, scanning electron microscopy, and differential scanning calorimetry. It was shown that the good dispersibility of PVA in the PLA matrix, rather than the intercalation effect, was responsible for the improved gas barrier and mechanical properties of PLA/PVA/OMMT composite. The elongation at break increases from 4.5% to 22.7% when 1 wt % PVA is added to PLA/OMMT. Moreover, gas barrier of PLA/PVA1/OMMT measured as O2 permeability is 52.8% higher than that of neat PLA. This work provides a route to intercalate OMMT interlayer with high gas barrier polymers and thus can be a useful reference to fabricate PLA/OMMT composites with improved gas barrier and mechanical properties. A comparison of oxygen permeabilities with existing commercial packaging films indicates that the biodegradable PLA/PVA/OMMT may serve as a viable substitute for packaging film applications.

Sign in / Sign up

Export Citation Format

Share Document