Modelling Pseudomonas fluorescens and Pseudomonas aeruginosa biofilm formation on stainless steel surfaces and controlling through sanitisers

2021 ◽  
Vol 114 ◽  
pp. 104945
Author(s):  
Marcília Santos Rosado Castro ◽  
Meg da Silva Fernandes ◽  
Dirce Yorika Kabuki ◽  
Arnaldo Yoshiteru Kuaye
2012 ◽  
Vol 32 (1) ◽  
pp. 142-150 ◽  
Author(s):  
Danila Soares Caixeta ◽  
Thiago Henrique Scarpa ◽  
Danilo Florisvaldo Brugnera ◽  
Dieyckson Osvani Freire ◽  
Eduardo Alves ◽  
...  

The biofilm formation of Pseudomonas aeruginosa and Pseudomonas fluorescens on AISI 304 stainless steel in the presence of reconstituted skim milk under different temperatures was conducted, and the potential of three chemical sanitizers in removing the mono-species biofilms formed was compared. Pseudomonas aeruginosa cultivated in skim milk at 28 °C presented better growth rate (10.4 log CFU.mL-1) when compared with 3.7 and 4.2 log CFU.mL-1 for P. aeruginosa and P. fluorescens cultivated at 7 °C, respectively. Pseudomonas aeruginosa formed biofilm when cultivated at 28 °C. However, only the adhesion of P. aeruginosa and P. fluorescens was observed when incubated at 7 °C. The sodium dichloroisocyanurate was the most efficient sanitizer in the reduction of the adhered P. aeruginosa cells at 7 and 28 °C and those on the biofilm, respectively. The hydrogen peroxide was more effective in the reduction of adhered cells of P. fluorescens at 7 °C.


2020 ◽  
Vol 63 (5) ◽  
pp. 1401-1407
Author(s):  
Bog Eum Lee ◽  
Youngsang You ◽  
Won Choi ◽  
Eun-mi Hong ◽  
Marisa M. Wall ◽  
...  

HighlightsNanoporous superhydrophobic surfaces were fabricated using electrochemical etching and Teflon coating.Adhesion of Listeria monocytogenes to the nanoengineered stainless steel surfaces was reduced.Self-cleanable food-contact surfaces prevent bacterial attachment and subsequent biofilm formation.Abstract. Bacterial attachment on solid surfaces and subsequent biofilm formation is a significant problem in the food industry. Superhydrophobic surfaces have potential to prevent bacterial adhesion by minimizing the contact area between bacterial cells and the surface. In this study, stainless steel-based superhydrophobic surfaces were fabricated by manipulating nanostructures with electrochemical etching and polytetrafluoroethylene (PTFE) film. The formation of nanostructures on stainless steel surfaces was characterized by field emission scanning electron microscopy (FESEM). The stainless steel surfaces etched at 10 V for 5 min and at 10 V for 10 min with PTFE deposition resulted in average water contact angles of 154° ±4° with pore diameters of 50 nm. In addition, adhesion of Listeria monocytogenes was decreased by up to 99% compared to the bare substrate. These findings demonstrate the potential for the development of antibacterial surfaces by combining nanoporous patterns with PTFE films. Keywords: Electrochemical etching, PTFE, Nanoengineered surface, L. monocytogenes, Superhydrophobic.


2003 ◽  
Vol 69 (8) ◽  
pp. 4814-4822 ◽  
Author(s):  
Ann-Cathrin Olofsson ◽  
Malte Hermansson ◽  
Hans Elwing

ABSTRACT N-Acetyl-l-cysteine (NAC) is used in medical treatment of patients with chronic bronchitis. The positive effects of NAC treatment have primarily been attributed to the mucus-dissolving properties of NAC, as well as its ability to decrease biofilm formation, which reduces bacterial infections. Our results suggest that NAC also may be an interesting candidate for use as an agent to reduce and prevent biofilm formation on stainless steel surfaces in environments typical of paper mill plants. Using 10 different bacterial strains isolated from a paper mill, we found that the mode of action of NAC is chemical, as well as biological, in the case of bacterial adhesion to stainless steel surfaces. The initial adhesion of bacteria is dependent on the wettability of the substratum. NAC was shown to bind to stainless steel, increasing the wettability of the surface. Moreover, NAC decreased bacterial adhesion and even detached bacteria that were adhering to stainless steel surfaces. Growth of various bacteria, as monocultures or in a multispecies community, was inhibited at different concentrations of NAC. We also found that there was no detectable degradation of extracellular polysaccharides (EPS) by NAC, indicating that NAC reduced the production of EPS, in most bacteria tested, even at concentrations at which growth was not affected. Altogether, the presence of NAC changes the texture of the biofilm formed and makes NAC an interesting candidate for use as a general inhibitor of formation of bacterial biofilms on stainless steel surfaces.


2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Victoria O. Adetunji ◽  
Aderemi O. Kehinde ◽  
Olayemi K. Bolatito ◽  
Jinru Chen

Mycobacterium boviscauses classic bovine tuberculosis, a zoonosis which is still a concern in Africa. Biofilm forming ability of twoMycobacterium bovisstrains was assessed on coupons of cement, ceramic, or stainless steel in three different microbiological media at 37°C with agitation for 2, 3, or 4 weeks to determine the medium that promotes biofilm. Biofilm mass accumulated on coupons was treated with 2 sanitizers (sanitizer A (5.5 mg L−1active iodine) and sanitizer B (170.6 g1alkyl dimethylbenzyl ammonium chloride, 78 g−1didecyldimethyl ammonium chloride, 107.25 g L−1glutaraldehyde, 146.25 g L−1isopropanol, and 20 g L−1pine oil) at 28 and 45°C and in hot water at 85°C for 5 min. Residual biofilms on treated coupons were quantified using crystal violet binding assay. The two strains had a similar ability to form biofilms on the three surfaces. More biofilms were developed in media containing 5% liver extract. Biofilm mass increased as incubation time increased till the 3rd week. More biofilms were formed on cement than on ceramic and stainless steel surfaces. Treatment with hot water at 85°C reduced biofilm mass, however, sanitizing treatments at 45°C removed more biofilms than at 28°C. However, neither treatment completely eliminated the biofilms. The choice of processing surface and temperatures used for sanitizing treatments had an impact on biofilm formation and its removal from solid surfaces.


2016 ◽  
Vol 36 ◽  
pp. 311-319 ◽  
Author(s):  
Alonzo A. Gabriel ◽  
Maria Chelsea Clarisse F. Ugay ◽  
Maria Auxilla T. Siringan ◽  
Leo Mendel D. Rosario ◽  
Roy B. Tumlos ◽  
...  

2014 ◽  
Vol 191 ◽  
pp. 116-124 ◽  
Author(s):  
Fatma Ait Ouali ◽  
Imad Al Kassaa ◽  
Benoit Cudennec ◽  
Marwan Abdallah ◽  
Farida Bendali ◽  
...  

Food Control ◽  
2017 ◽  
Vol 75 ◽  
pp. 255-261 ◽  
Author(s):  
Melvin R. Tapia-Rodriguez ◽  
Adrian Hernandez-Mendoza ◽  
Gustavo A. Gonzalez-Aguilar ◽  
Miguel Angel Martinez-Tellez ◽  
Claudia Miranda Martins ◽  
...  

2003 ◽  
Vol 185 (2) ◽  
pp. 453-460 ◽  
Author(s):  
Eduardo A. Robleto ◽  
Inmaculada López-Hernández ◽  
Mark W. Silby ◽  
Stuart B. Levy

ABSTRACT AdnA is a transcription factor in Pseudomonas fluorescens that affects flagellar synthesis, biofilm formation, and sand adhesion. To identify the AdnA regulon, we used a promoterless Tn5-lacZ element to study the phenotypes of insertion mutants in the presence and absence of AdnA. Of 12,000 insertions, we identified seven different putative open reading frames (ORFs) activated by AdnA (named aba for activated by AdnA). aba120 and aba177 showed homology to flgC and flgI, components of the basal body of the flagella in Pseudomonas aeruginosa. Two other insertions, aba18 and aba51, disrupted genes affecting chemotaxis. The mutant loci aba160 (possibly affecting lipopolysaccharide synthesis) and aba175 (unknown function) led to loss of flagella. The mutant bearing aba203 became motile when complemented with adnA, but the mutated gene showed no similarity to known genes. Curiously, aba18, aba51, aba160, and aba203 mutants formed biofilms even in the absence of AdnA, suppressing the phenotype of the adnA deletion mutant. The combined findings suggest that flagella are nonessential for sand attachment or biofilm formation. Sequence and promoter analyses indicate that AdnA affects at least 23 ORFs either directly or by polar effects. These results support the concept that AdnA regulates cell processes other than those directly related to flagellar synthesis and define a broader cadre of genes in P. fluorescens than that described so far for its homolog, FleQ, in P. aeruginosa.


Toxins ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 420 ◽  
Author(s):  
Danielle Bruno de Carvalho ◽  
Eduardo Gonçalves Paterson Fox ◽  
Diogo Gama dos Santos ◽  
Joab Sampaio de Sousa ◽  
Denise Maria Guimarães Freire ◽  
...  

Biofilm formation on exposed surfaces is a serious issue for the food industry and medical health facilities. There are many proposed strategies to delay, reduce, or even eliminate biofilm formation on surfaces. The present study focuses on the applicability of fire ant venom alkaloids (aka ‘solenopsins’, from Solenopsis invicta) tested on polystyrene and stainless steel surfaces relative to the adhesion and biofilm-formation by the bacterium Pseudomonas fluorescens. Conditioning with solenopsins demonstrates significant reduction of bacterial adhesion. Inhibition rates were 62.7% on polystyrene and 59.0% on stainless steel surfaces. In addition, solenopsins drastically reduced cell populations already growing on conditioned surfaces. Contrary to assumptions by previous authors, solenopsins tested negative for amphipathic properties, thus understanding the mechanisms behind the observed effects still relies on further investigation.


Sign in / Sign up

Export Citation Format

Share Document