Determining the spectral responsivity from relative measurements by using multicolor light-emitting diodes as probing light sources

Optik ◽  
2015 ◽  
Vol 126 (21) ◽  
pp. 3088-3092 ◽  
Author(s):  
Pao-Keng Yang
Molecules ◽  
2021 ◽  
Vol 26 (5) ◽  
pp. 1477
Author(s):  
Woo-Suk Jung ◽  
Ill-Min Chung ◽  
Myeong Ha Hwang ◽  
Seung-Hyun Kim ◽  
Chang Yeon Yu ◽  
...  

Light is a key factor that affects phytochemical synthesis and accumulation in plants. Due to limitations of the environment or cultivated land, there is an urgent need to develop indoor cultivation systems to obtain higher yields with increased phytochemical concentrations using convenient light sources. Light-emitting diodes (LEDs) have several advantages, including consumption of lesser power, longer half-life, higher efficacy, and wider variation in the spectral wavelength than traditional light sources; therefore, these devices are preferred for in vitro culture and indoor plant growth. Moreover, LED irradiation of seedlings enhances plant biomass, nutrient and secondary metabolite levels, and antioxidant properties. Specifically, red and blue LED irradiation exerts strong effects on photosynthesis, stomatal functioning, phototropism, photomorphogenesis, and photosynthetic pigment levels. Additionally, ex vitro plantlet development and acclimatization can be enhanced by regulating the spectral properties of LEDs. Applying an appropriate LED spectral wavelength significantly increases antioxidant enzyme activity in plants, thereby enhancing the cell defense system and providing protection from oxidative damage. Since different plant species respond differently to lighting in the cultivation environment, it is necessary to evaluate specific wavebands before large-scale LED application for controlled in vitro plant growth. This review focuses on the most recent advances and applications of LEDs for in vitro culture organogenesis. The mechanisms underlying the production of different phytochemicals, including phenolics, flavonoids, carotenoids, anthocyanins, and antioxidant enzymes, have also been discussed.


CrystEngComm ◽  
2021 ◽  
Author(s):  
Mingming Jiang ◽  
Fupeng Zhang ◽  
Kai Tang ◽  
Peng Wan ◽  
Caixia Kan

Achieving electrically-driven exciton-polaritons has drawn substantial attention toward developing ultralow-threshold coherent light sources, containing polariton laser devices and high-performance light-emitting diodes (LEDs). In this work, we demonstrate an electrically driven...


2011 ◽  
Vol 1286 ◽  
Author(s):  
Th. C. Rosenow ◽  
S. Olthof ◽  
S. Reineke ◽  
B. Lüssem ◽  
K. Leo

ABSTRACTOrganic light-emitting diodes (OLEDs) are developing into a competitive alternative to conventional light sources. Nevertheless, OLEDs need further improvement in terms of efficiency and color rendering for lighting applications. Fluorescent blue emitters allow deep blue emission and high stability, while phosphorescent blue emitter still suffer from insufficient stability. The concept of triplet harvesting is the key for achieving internal quantum efficiencies up to 100 % and simultaneously benefiting from the advantages of fluorescent blue emitters. Here, we present a stacked OLED consisting of two units comprising four different emitters in total. The first unit takes advantage of the concept of triplet harvesting and combines the light emission of a fluorescent blue and a phosphorescent red emitter. The second unit emits light from a single emission layer consisting of a matrix doped with phosphorescent green and yellow emitters. With this approach, we reach white color coordinates close to the standard illuminant A and a color rendering index of above 75. The presented devices are characterized by high luminous efficacies of above 30 lm/W on standard glass substrates without outcoupling enhancement.


Acta Tropica ◽  
2018 ◽  
Vol 183 ◽  
pp. 61-63 ◽  
Author(s):  
Benedita Maria Costa-Neta ◽  
Abdias Ribeiro Lima-Neto ◽  
Apoliana Araújo da Silva ◽  
Jefferson Mesquita Brito ◽  
João Vitor Castro Aguiar ◽  
...  

2007 ◽  
Vol 105 (2) ◽  
pp. 803-808 ◽  
Author(s):  
Kelechi C. Anyaogu ◽  
Andrey A. Ermoshkin ◽  
Douglas C. Neckers ◽  
Alex Mejiritski ◽  
Oleg Grinevich ◽  
...  

2019 ◽  
Vol 11 (10) ◽  
pp. 2867 ◽  
Author(s):  
Pedro García-Caparrós ◽  
Eva Almansa ◽  
Rosa Chica ◽  
María Lao

Specific wavebands may allow precise control of plant growth. However, light sources must be carefully evaluated before the large-scale use of supplemental light sources can be implemented. Dieffenbachia maculata “Compacta” plants were grown for 8 weeks in pots in a growth chamber under tightly controlled temperature and humidity in order to assess the effects of supplemental light. Three treatments were applied: (i) using 18-W fluorescent bulbs (T1), (ii) using the same bulbs with supplemental light emitting diodes (LEDs) (Pure Blue and Pure Red Mix-Light-Emitting Diodes (BR-LEDs)) (T2), and (iii) using high-efficiency TL5 fluorescents (T3). Plant biomass, mineral composition, and physiological and photosynthetic parameters were assessed under each light treatment. Total plant dry weight was highest in plants grown under treatments T1 and T3. Other differences were observed between different light treatments, including variation in biomass partitioning as well as N and K concentrations in roots, stems, and leaves. Further, proline and indole 3-acetic acid (IAA) levels were higher in plants grown under the T1 treatment, whereas total soluble sugars and starch were higher in plants grown under treatment T3. Plants grown under treatment T1 had the lowest chlorophyll concentrations. No differences were observed in organ water content and P concentration. T2 was not the best treatment, as expected. The model proposed a linear regression between integrated use of spectral energy (IUSE) and total dry weight (TDW), which showed a good relationship with an R2 value of 0.83. Therefore, we recommend this methodology to discern the effects of the different spectral qualities on plant biomass.


2017 ◽  
Vol 25 (6) ◽  
pp. 416-422 ◽  
Author(s):  
Clinton J Hayes ◽  
Kerry B Walsh ◽  
Colin V Greensill

Understanding of light-emitting diode lamp behaviour is essential to support the use of these devices as illumination sources in near infrared spectroscopy. Spectral variation in light-emitting diode peak output (680, 700, 720, 735, 760, 780, 850, 880 and 940 nm) was assessed over time from power up and with variation in environmental temperature. Initial light-emitting diode power up to full intensity occurred within a measurement cycle (12 ms), then intensity decreased exponentially over approximately 6 min, a result ascribed to an increase in junction temperature as current is passed through the light-emitting diode. Some light-emitting diodes displayed start-up output characteristics on their first use, indicating the need for a short light-emitting diode ‘burn in’ period, which was less than 24 h in all cases. Increasing the ambient temperature produced a logarithmic decrease in overall intensity of the light-emitting diodes and a linear shift to longer wavelength of the peak emission. This behaviour is consistent with the observed decrease in the IAD Index (absorbance difference between 670 nm and 720 nm, A670–A720) with increased ambient temperature, as measured by an instrument utilising light-emitting diode illumination (DA Meter). Instruments using light-emitting diodes should be designed to avoid or accommodate the effect of temperature. If accommodating temperature, as light-emitting diode manufacturer specifications are broad, characterisation is recommended.


2019 ◽  
Vol 11 (22) ◽  
pp. 6198 ◽  
Author(s):  
Roy H. A. van Grunsven ◽  
Julia Becker ◽  
Stephanie Peter ◽  
Stefan Heller ◽  
Franz Hölker

Among the different light sources used for street lighting, light-emitting diodes (LEDs) are likely to dominate the world market in the coming years. At the same time, the spectral composition of nocturnal illumination is changing. Europe and many other areas worldwide have implemented bans on energy-inefficient lamps, such as the still very common mercury vapor lamps. However, the impact of artificial light on insects is mostly tested with light-traps or flight-intercept traps that are used for short periods only. By comparing the numbers of insects attracted by street lamps before and after replacing mercury vapor light sources (MV) with light emitting diodes, we assessed the impact in more typical (urban and peri-urban) settings over several years. We found that LED attracted approximately half of the number of insects compared to MV lights. Furthermore, most insect groups are less drawn by LED than by MV, while Hymenoptera are less attracted by MV than by LED. Thus, the composition of the attracted communities differed between the light sources, which may impact ecosystem processes and functions. In green peri-urban settings more insects are attracted than in an urban setting, but the relative difference between the light sources is the same.


2019 ◽  
Vol 3 (1) ◽  
Author(s):  
Cheng Lian ◽  
Marta Piksa ◽  
Kou Yoshida ◽  
Saydulla Persheyev ◽  
Krzysztof J. Pawlik ◽  
...  

Abstract Bacterial infection and the growth of antibiotic resistance is a serious problem that leads to patient suffering, death and increased costs of healthcare. To address this problem, we propose using flexible organic light-emitting diodes (OLEDs) as light sources for photodynamic therapy (PDT) to kill bacteria. PDT involves the use of light and a photosensitizer to generate reactive oxygen species that kill neighbouring cells. We have developed flexible top-emitting OLEDs with the ability to tune the emission peak from 669 to 737 nm to match the photosensitizer, together with high irradiance, low driving voltage, long operational lifetime and adequate shelf-life. These features enable OLEDs to be the ideal candidate for ambulatory PDT light sources. A detailed study of OLED–PDT for killing Staphylococcus aureus was performed. The results show that our OLEDs in combination with the photosensitizer methylene blue, can kill more than 99% of bacteria. This indicates a huge potential for using OLEDs to treat bacterial infections.


Sign in / Sign up

Export Citation Format

Share Document