Sustainable low liquor ratio dyeing of wool with acid dyes: Effect of auxiliaries on agglomeration of dye molecules in a dyebath and dyeing uniformity

2017 ◽  
Vol 152 ◽  
pp. 464-473 ◽  
Author(s):  
Mohammad M. Hassan ◽  
Meetal Bhagvandas
Keyword(s):  
Dye Molecules ◽  
Acid Dyes ◽  
Liquor Ratio

scholarly journals A green approach for the treatment of dye and surfactant contaminated industrial wastewater

2020 ◽  
Vol 80 (3) ◽  
pp. 615-620
Author(s):  
Ü. D. Gül
Keyword(s):  
Textile Industry ◽  
Industrial Wastewater ◽  
Biological Treatment ◽  
Textile Wastewater ◽  
Textile Dye ◽  
Synthetic Dyes ◽  
Dye Molecules ◽  
Acid Dyes ◽  
Green Approach ◽  
Excellent Color

Abstract Synthetic dyes, particularly reactive and acid dyes, are commonly used in the textile industry because of their advantages as excellent color fastness and brightness. Also, surfactants are used for an increment of coloring success in the textile industry. One of the major problems concerning textile wastewater is the treatment of the effluents containing both dyes and surfactants. Biological treatment systems are recommended as useful, economic and eco-friendly methods for treatment of industrial wastewater. The purpose of this study was to investigate the binary removal of a textile dye and a surfactant by growing Aspergillus versicolor culture in molasses medium. The effect of dye and surfactant concentration on the removal of dye and surfactant was determined. This study resulted that 100% of the surfactant and dye molecules removed together with the formation of a dye-surfactant complex by fungus. It is concluded that binary removal systems are very efficient for industrial wastewater treatment.

Evaluation of Antibacterial Potential of New Acid Dyes Based on Substituted Aryl Amines and Amino Hydroxy Sulfonic Acid

2020 ◽  
Vol 42 (5) ◽  
pp. 783-783
Author(s):  
Zeeshan Akhtar Zeeshan Akhtar ◽  
Syed Imran Ali Syed Imran Ali ◽  
Naseem Abbas Naseem Abbas ◽  
Muhammad Ali Muhammad Ali ◽  
Muhammad Yasir Khan Muhammad Yasir Khan ◽  
...  
Keyword(s):  
Antimicrobial Activity ◽  
Sulfonic Acid ◽  
Diffusion Method ◽  
Dye Molecules ◽  
Bacterial Strains ◽  
Acid Dyes ◽  
Aryl Amines ◽  
Coupling Components ◽  
Antibacterial Potential

Six newly synthesized acid dye derivatives were evaluated for their in vitro antimicrobial activity against four (04) Gram positive (Staphylococcus aureus, Staphylococcus lugdunensis, Streptococcus pneumoniae and Bacillus subtilis) and six (06) Gram negative (Pseudomonas aeruginosa, Acinetobacter baumannii, Citrobacter freundii, Klebsiella pneumoniae,Pseudomonas fluorescens and Shigella sonnei) bacterial strains. The dyes were synthesized using substituted aryl amines and substituted amino hydroxy sulfonic acid as diazo and coupling components, respectively. The antimicrobial activity was explored by Agar-Well Diffusion method using 100 mg/ml dye concentration. The results demonstrated that the dyes possess varying degrees of activities against the bacterial strains tested and the structure of the dye molecules was found to have considerable influence on their antimicrobial activity.

Quantitative Freeze Fracture Studies of Gap Junctions in Somatic Cell Hybrids, Their Parents, and Revertants

1976 ◽  
Vol 34 ◽  
pp. 218-219
Author(s):  
W. J. Larsen ◽  
R. Azarnia ◽  
W. R. Loewenstein
Keyword(s):  
Gap Junctions ◽  
Striated Muscle ◽  
Freeze Fracture ◽  
Cell Movement ◽  
Dye Molecules ◽  
Somatic Cell Hybrids ◽  
Cell Coupling ◽  
Normal Cells ◽  
Mediate Cell ◽  
Almost All

Although the physiological significance of the gap junction remains unspecified, these membrane specializations are now recognized as common to almost all normal cells (excluding adult striated muscle and some nerve cells) and are found in organisms ranging from the coelenterates to man. Since it appears likely that these structures mediate the cell-to-cell movement of ions and small dye molecules in some electrical tissues, we undertook this study with the objective of determining whether gap junctions in inexcitable tissues also mediate cell-to-cell coupling.To test this hypothesis, a coupling, human Lesh-Nyhan (LN) cell was fused with a non-coupling, mouse cl-1D cell, and the hybrids, revertants, and parental cells were analysed for coupling with respect both to ions and fluorescein and for membrane junctions with the freeze fracture technique.

Study on the Chemical Modification Process of Jute Fiber

TAPPI Journal ◽  
2010 ◽  
Vol 9 (2) ◽  
pp. 23-29 ◽  
Author(s):  
Wei-ming Wang ◽  
Zai-sheng Cai ◽  
Jian-yong Yu
Keyword(s):  
Sodium Hydroxide ◽  
Sodium Silicate ◽  
Treatment Time ◽  
Jute Fiber ◽  
Process Conditions ◽  
Silicate Concentration ◽  
Sodium Hydroxide Concentration ◽  
Liquor Ratio ◽  
Degumming Process ◽  
Selection Of

Degumming of pre-chlorite treated jute fiber was studied in this paper. The effects of sodium hydroxide concentration, treatment time, temperature, sodium silicate concentration, fiber-to-liquor ratio, penetrating agent TF-107B concentration, and degumming agent TF-125A concentration were the process conditions examined. With respect to gum decomposition, fineness and mechanical properties, sodium hydroxide concentration, sodium silicate concentration, and treatment time were found to be the most important parameters. An orthogonal L9(34) experiment designed to optimize the conditions for degumming resulted in the selection of the following procedure: sodium hydroxide of 12g/L, sodium silicate of 3g/L, TF-107B of 2g/L, TF-125A of 2g/L, treatment time of 105 min, temperature of 100°C and fiber to liquor ratio of 1:20. The effect of the above degumming process on the removal of impurities was also examined and the results showed that degumming was an effective method for removing impurities, especially hemicellulose.

Enhanced Electroluminescence of Urethane Containing Processable Polythiophene Derivative by Addition of Dye Molecules

2000 ◽  
Vol 660 ◽  
Author(s):  
Amarjeet Kaur ◽  
Mario J. Cazeca ◽  
Kethinni G. Chittibabu ◽  
Jayant Kumar ◽  
Sukant K. Tripathy
Keyword(s):  
Fluorescent Dyes ◽  
Visible Region ◽  
Dye Molecules ◽  
Flat Panel Display ◽  
Large Area ◽  
Good Efficiency ◽  
Display Devices ◽  
Yellow Color ◽  
Organic Electroluminescent ◽  
Important Approach

ABSTRACTOrganic electroluminescent (EL) diodes based on fluorescent dyes and conducting polymers have attracted the interest of researchers, mainly because of their emission in the visible region and for application to large area portable flat panel display devices, driven at low voltages. Therefore, for the development of higher efficiency polymer EL diodes, the optimal combination of the merits of organic fluorescent dye molecules with that of conjugated polymer is an important approach. We report electroluminescence studies of polymer light emitting diodes (p-LEDs) fabricated with poly[2-(3-thienyl)ethanol n-butoxy carbonylmethyl urethane] (PURET) and its composite with 4-dicyanomethylene-2-methyl-6-(p-dimethylaminostyryl)-4H pyran (DCM) dye. These materials have been chosen in view of the fact that PURET exhibits a small overlap between emission and absorption spectra whereas DCM has a good efficiency of trapping both electrons as well as holes. Polyaniline has been utilized as hole injecting layer whereas tris-8-hydroxyquinoline-aluminum as electron injecting layer. Enhanced electroluminescence with bright yellow color has been observed in p-LEDs by the addition of dye.

On-Demand Guest Release from MOF-5 Sealed with Nitrophenylacetic Acid Photocapping Groups

2019 ◽  
Author(s):  
Jingjing Yan ◽  
Rick Homan ◽  
Corrianna Boucher ◽  
Prem N. Basa ◽  
Katherine Fossum ◽  
...  
Keyword(s):  
Acetic Acid ◽  
Crystal Violet ◽  
Dye Molecules ◽  
Phenyl Acetic Acid ◽  
On Demand ◽  
Crystal Violet Dye ◽  
Dye Diffusion ◽  
Triphenylacetic Acid

Recently, we demonstrated that triphenylacetic acid could be used to seal dye molecules within MOF-5, but guest release required digestion of the framework by treatment with acid. We prepared the sterically bulky photocapping group [bis-(3-nitro-benzyl)-amino]-(3-nitro-phenyl)-acetic acid (PC1) can prevent Crystal violet dye diffusion from inside MOF-5 until removed by photolysis.

On-Demand Guest Release from MOF-5 Sealed with Nitrophenylacetic Acid Photocapping Groups

2019 ◽  
Author(s):  
Jingjing Yan ◽  
Rick Homan ◽  
Corrianna Boucher ◽  
Prem N. Basa ◽  
Katherine Fossum ◽  
...  
Keyword(s):  
Acetic Acid ◽  
Crystal Violet ◽  
Dye Molecules ◽  
Phenyl Acetic Acid ◽  
On Demand ◽  
Crystal Violet Dye ◽  
Dye Diffusion ◽  
Triphenylacetic Acid

Recently, we demonstrated that triphenylacetic acid could be used to seal dye molecules within MOF-5, but guest release required digestion of the framework by treatment with acid. We prepared the sterically bulky photocapping group [bis-(3-nitro-benzyl)-amino]-(3-nitro-phenyl)-acetic acid (PC1) can prevent Crystal violet dye diffusion from inside MOF-5 until removed by photolysis.

Photocatalytic Discolouration of Solutions of Reactive Dyes in the Presence of H2O2

1995 ◽  
Vol 30 (1) ◽  
pp. 53-60 ◽  
Author(s):  
Deng Nansheng ◽  
Tian Shizhong ◽  
Xia Mei
Keyword(s):  
Photochemical Reaction ◽  
Uv Light ◽  
Reactive Dyes ◽  
Solar Light ◽  
Rate Equations ◽  
Oh Radical ◽  
Test Results ◽  
Dye Molecules ◽  
First Order ◽  
Dye Solutions

Abstract Tests for the photocatalytic degradation of solutions of three reactive dyes, Red M-5B, Procion Blue MX-R and Procion Black H-N, in the presence of H2O2 were carried out. When the solutions of the three reactive dyes were irradiated by UV or solar light, the colour of the solutions disappeared gradually. A statistical analysis of the test results indicated a linear relation between the concentration of dyes and the time of irradiation. The discolouration reaction of the solutions was of the first order. Rate equations for the discolouration reactions of dye solutions were developed. The dark reactions or the dye solutions containing H2O2 were very slow, illustrating that the photochemical reaction played a very important role. It was demonstrated that UV light and solar light (300 to 380 nm) photolyzes the HO and that the resulting OH radical reacts with the dye molecules and destroys the chromophore.

A Study on the Use of Bipolar-Particles-Electrodes in Decolorization of Dyeing Effluents and Its Principle

1987 ◽  
Vol 19 (3-4) ◽  
pp. 391-400 ◽  
Author(s):  
Zhou Ding ◽  
Cai Wei Min ◽  
Wang Qun Hui
Keyword(s):  
Energy Consumption ◽  
High Efficiency ◽  
Low Energy ◽  
Acid Dyes ◽  
Underlying Principle ◽  
Low Energy Consumption ◽  
Transparent Liquid

This paper studies the use of bipolar-particles-electrodes in the decolorization of dyeing effluents. Treatment of highly colored solutions of various soluble dyes (such as direct, reactive, cationic or acid dyes) and also samples of dyeing effluents gave rise to an almost colorless transparent liquid, with removal of CODcr and BOD5 being as high as over 80%. The method is characterized by its high efficiency, low energy consumption and long performance life. A discussion of the underlying principle is given.

Sign in / Sign up

Export Citation Format

Share Document