Synthesis of ZnO/TiO2 spherical particles for blue light screening by ultrasonic spray pyrolysis

2020 ◽  
Vol 24 ◽  
pp. 101126 ◽  
Author(s):  
Ratanathavorn Wittawat ◽  
Rungruang Rittipun ◽  
Modsuwan Jarasfah ◽  
Bouhoad Nattaporn
Keyword(s):  
Spray Pyrolysis ◽  
Blue Light ◽  
Ultrasonic Spray Pyrolysis ◽  
Spherical Particles ◽  
Ultrasonic Spray

LPG Synthesis from Syngas over Cu/ZnO-Pd-β Catalysts Prepared by Ultrasonic Spray Pyrolysis

2015 ◽  
Vol 659 ◽  
pp. 252-256
Author(s):  
Sudarat Chaiwatyothin ◽  
Wittawat Ratanathavorn ◽  
Tharapong Vitidsant ◽  
Prasert Reubroycharoen
Keyword(s):  
Spray Pyrolysis ◽  
Fixed Bed ◽  
Ultrasonic Spray Pyrolysis ◽  
Product Distribution ◽  
Fixed Bed Reactor ◽  
Spherical Particles ◽  
Gaseous State ◽  
X Ray ◽  
Ultrasonic Spray ◽  
Co Conversion

Synthesis of nanoCu/ZnO catalyst for LPG production was prepared by ultrasonic spray pyrolysis (USP). Hollow spherical particles were obtained by USP technique using an aqueous solution of Cu (NO3)3.6H2O and Zn (NO3)3.3H2O with different concentration of 0.05, 0.1 and 0.5 molar under the pyrolysis temperatures of 600, 700 and 800°C. Mists of the solution were generated from the precursor solution by ultra sonic vibrators at frequency of ~1.7 MHz. The physicochemical properties of catalysts were characterized by X-ray diffraction, temperature-programmed reduction, scanning electron microscope, nitrogen adsorption-desorption, and energy dispersive X-ray spectrometer. The results showed that increasing in precursor concentration resulted in a large particle and particles size distributed in a range of 0.63-1.21 μm. Particles prepared at pyrolysis temperature 700°C exhibited homogeneous in size and shape compared to other temperature. The catalytic activity of nanoCu/ZnO-Pd-β catalysts was performed in a fixed-bed reactor for synthesizing LPG. The reaction took place at 260°C, 3.0 MPa, and the ratio of H2/CO = 2/1. All the products from the reactor were in gaseous state, and analyzed by on-line gas chromatography. The results showed that %CO conversion was high but decreased rapidly with increasing reaction time. Cu/ZnO catalyst prepared by co-precipitation gave higher %CO conversion than that prepared by ultrasonic spray pyrolysis. Moreover, hydrocarbon product distribution for Cu/ZnO catalyst produced at concentration 0.1 M 700°C by ultrasonic spray pyrolysis gave the highest LPG selectivity.

scholarly journals Synthesis of Silica Particles Using Ultrasonic Spray Pyrolysis Method

Metals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 463
Author(s):  
Srecko Stopic ◽  
Felix Wenz ◽  
Tatjana-Volkov Husovic ◽  
Bernd Friedrich
Keyword(s):  
Spray Pyrolysis ◽  
Sol Gel ◽  
Ultrasonic Spray Pyrolysis ◽  
Silica Particles ◽  
Cement Industry ◽  
Submicron Particles ◽  
Spherical Particles ◽  
Spray Pyrolysis Method ◽  
X Ray ◽  
Ultrasonic Spray

Silica has sparked strong interest in hydrometallurgy, catalysis, the cement industry, and paper coating. The synthesis of silica particles was performed at 900 °C using the ultrasonic spray pyrolysis (USP) method. Ideally, spherical particles are obtained in one horizontal reactor from an aerosol. The controlled synthesis of submicron particles of silica was reached by changing the concentration of precursor solution. The experimentally obtained particles were compared with theoretically calculated values of silica particles. The characterization was performed using a scanning electron microscope (SEM) and energy-dispersive X-ray spectroscopy (EDS). X-ray diffraction, frequently abbreviated as XRD, was used to analyze the structure of obtained materials. The obtained silica by ultrasonic spray pyrolysis had an amorphous structure. In comparison to other methods such as sol–gel, acidic treatment, thermal decomposition, stirred bead milling, and high-pressure carbonation, the advantage of the ultrasonic spray method for preparation of nanosized silica controlled morphology is the simplicity of setting up individual process segments and changing their configuration, one-step continuous synthesis, and the possibility of synthesizing nanoparticles from various precursors.

Synthesis, morphology, and formation mechanism of mullite particles produced by ultrasonic spray pyrolysis

1996 ◽  
Vol 11 (7) ◽  
pp. 1706-1716 ◽  
Author(s):  
Dj. Janaćković ◽  
V. Jokanović ◽  
Lj. Kostić-Gvozdenović ◽  
Lj. Živković ◽  
D. Uskoković
Keyword(s):  
Spray Pyrolysis ◽  
Silicic Acid ◽  
Formation Mechanism ◽  
Ultrasonic Spray Pyrolysis ◽  
Spherical Particles ◽  
Mullite Phase ◽  
Ultrasonic Spray ◽  
Solution Preparation ◽  
Subsequent Phase ◽  
Mullite Powder

Submicrometer spherical particles of mullite powder were synthesized by ultrasonic spray pyrolysis of emulsion and solutions, using tetra-ethyl-orthosilicate (TEOS) or silicic-acid and Al(NO3)3 · 9H2O as initial compounds. Crystallization of mullite phase was determined by differential thermal (DT), thermogravimetric (TG), infrared (IR), and x-ray analyses. The synthesis of mullite from TEOS emulsion occurs by crystallization of γ–Al2O3 (or Al, Si-spinel) from the amorphous phase and its subsequent reaction with amorphous SiO2, as well as by crystallization of pseudotetragonal mullite below 1000 °C and its subsequent phase transformation into orthorhombic mullite. In the powders produced from silicic acid solutions, synthesis of mullite occurs only by crystallization of γ–Al2O3 between 900 and 1000 °C and its further reaction with amorphous SiO2 between 1100 and 1200 °C. Particle formation mechanism depended directly on the initial emulsion or solution preparation, i.e., on the phase separation in the emulsion and on the silicic-acid crosslinking conditions.

Nanoparticles Synthesis by Air-Assisted Ultrasonic Spray Pyrolysis

2001 ◽  
Vol 704 ◽  
Author(s):  
Shirley C. Tsai ◽  
Yu L. Song ◽  
C.Y. Chen ◽  
T. Kuan Tseng ◽  
Chen S. Tsai ◽  
...  
Keyword(s):  
Spray Pyrolysis ◽  
Ultrasonic Spray Pyrolysis ◽  
Vapor Condensation ◽  
Spherical Particles ◽  
Drive Power ◽  
Ultrasonic Atomization ◽  
Ultrasonic Spray ◽  
New Findings ◽  
Particle Size And Morphology ◽  
Size And Morphology

AbstractThis paper presents new findings regarding the effects of precursor drop size and concentration on product particle size and morphology in ultrasonic spray pyrolysis. Large precursor drops (diameter >30 μm) generated by ultrasonic atomization at 120kHz yielded particles with holes. Precursor drops 6-9 μm in diameter, generated by an ultrasonic nebulizer at 1.65MHz and 23.5W electric drive power, yielded uniform spherical particles 150nm in diameter under proper control of heating rate and precursor concentration. Moreover, air-assisted ultrasonic spray pyrolysis at 120kHz and 2.3W yielded spherical particles of which nearly half were smaller than those produced by the ultrasonic spray pyrolysis of the 6-9 μm precursor drops, despite the much larger precursor drop sizes (28 μm peak diameter versus 7 μm mean diameter). These particles are much smaller than those predicted by the conventional one particle per drop mechanism, suggesting that a vapor condensation mechanism may also be involved in spray pyrolysis. It may be concluded that through this new mechanism air-assisted ultrasonic spray pyrolysis can become a viable process for mass production of nanoparticles.

scholarly journals Preparation of Spherical Zn-Substituted Tricalcium Phosphate Powder by Ultrasonic Spray-Pyrolysis Technique and Its Characterization

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Hiroki Nishikawa ◽  
Michiyo Honda ◽  
Tomohiro Yokota ◽  
Yusuke Shimizu ◽  
Mamoru Aizawa
Keyword(s):  
Bulk Density ◽  
Spray Pyrolysis ◽  
Tricalcium Phosphate ◽  
Spray Pyrolysis Technique ◽  
Ultrasonic Spray Pyrolysis ◽  
Zinc Content ◽  
Spherical Particles ◽  
Ultrasonic Spray Pyrolysis Technique ◽  
Ultrasonic Spray ◽  
Zinc Addition

Zinc, an essential trace element, has a stimulatory effect on bone formation. To enhance the osteoconduction of implant materials such as hydroxyapatite and tricalcium phosphate (TCP), zinc was incorporated into them. In this study, we have synthesized spherical zinc-substituted TCP (Zn-TCP) powders using ultrasonic spray-pyrolysis technique, fabricated Zn-TCP ceramics, and characterized their powder properties. Four kinds of Zn-TCPs with various amounts of zinc content were prepared, to examine the influence of zinc addition to the crystal structure of TCP and to compare the different Zn-TCPs with each other. Zn-TCP ceramics were fabricated from the resulting powders under different sintering temperatures. Zn-TCP samples were analyzed and led to the following results: the resulting powders were composed ofα- andβ-TCP phases, whereas the fabricated ceramics mainly consisted ofβ-TCP phase. The determination of zinc content in the resulting powders and fabricated ceramics showed a maximum content of ~12 mol%. The resulting powders consisted of spherical particles with diameters <2 μm. The lattice constants of ceramics did not show a significant change of thea-axis,b-axis, andc-axis. The bulk density of Zn-TCPs showed their maximum at 1100°C, while the bulk density of Zn-TCP(0) was greatest at 1000°C.

Preparation of Silver-Containing Hydroxyapatite Powder by Ultrasonic Spray-Pyrolysis Technique and its Antibacterial Property

2011 ◽  
Vol 493-494 ◽  
pp. 678-683 ◽  
Author(s):  
Yusuke Kawanobe ◽  
Michiyo Honda ◽  
Toshiisa Konishi ◽  
Minori Mizumoto ◽  
Yuri Habuto ◽  
...  
Keyword(s):  
Antibacterial Activity ◽  
Spray Pyrolysis ◽  
Single Phase ◽  
Spray Pyrolysis Technique ◽  
Ultrasonic Spray Pyrolysis ◽  
Spherical Particles ◽  
Nominal Composition ◽  
Ultrasonic Spray Pyrolysis Technique ◽  
Ultrasonic Spray ◽  
Starting Solutions

We prepared silver-containing hydroxyapatite (Ag-HAp) powders by an ultrasonic spray-pyrolysis (USSP) technique and evaluated their antibacterial activity.　　Ag-HAp powders with Ag contents of 0, 1, 2, 5, and 20 mol% as nominal composition were prepared by the above USSP technique. The droplets of starting solutions were dried at 300 °C and then pyrolyzed at 850 °C to prepare the Ag-HAp powders. Ag-HAp powders showed a HAp single phase and were composed of spherical particles with a diameter of 0.5 - 3.0 μm. To evaluate the antibacterial activity of resulting powders, colony count method was performed using Staphylococcus aureus. Ag-HAp powders with the contents of Ag more than 5 mol% showed good antibacterial activity.

scholarly journals Structural and Electrochemical Properties of Nesting and Core/Shell Pt/TiO2 Spherical Particles Synthesized by Ultrasonic Spray Pyrolysis

Metals ◽  
2019 ◽  
Vol 10 (1) ◽  
pp. 11 ◽  
Author(s):  
Milica G. Košević ◽  
Milana M. Zarić ◽  
Srećko R. Stopić ◽  
Jasmina S. Stevanović ◽  
Thomas E. Weirich ◽  
...  
Keyword(s):  
Spray Pyrolysis ◽  
Oxygen Reduction ◽  
Hollow Spheres ◽  
Ultrasonic Spray Pyrolysis ◽  
Ex Situ ◽  
Spherical Particles ◽  
Core Shell ◽  
Ultrasonic Spray ◽  
Solid Spheres

Pt/TiO2 composites were synthesized by single-step ultrasonic spray pyrolysis (USP) at different temperatures. In an in-situ method, Pt and TiO2 particles were generated from tetra-n-butyl orthotitanate and chloroplatinic acid, and hydrothermally-prepared TiO2 colloidal dispersion served as Pt support in an ex-situ USP approach. USP-synthesized Pt/TiO2 composites were generated in the form of a solid mixture, morphologically organized in nesting huge hollow and small solid spheres, or TiO2 core/Pt shell regular spheroids by in-situ or ex-situ method, respectively. This paper exclusively reports on characteristic mechanisms of the formation of novel two-component solid composites, which are intrinsic from the USP approach and controlled precursor composition. The generation of the two morphological components within the in-situ approach, the hollow spheres and all-solid spheres, was indicated to be caused by characteristic sol-gel/solid phase transition of TiO2. Both the walls of the hollow spheres and the cores of all-solid ones consist of TiO2 matrix populated by 10 nm-sized Pt. On the other hand, spherical, uniformly-sized, Pt particles of a few nanometers in size created a shell uniformly deposited onto TiO2 spheres of ca. 150 nm size. Activities of the prepared samples in an oxygen reduction reaction and combined oxygen reduction and hydrogen evolution reactions were electrochemically tested. The ex-situ synthesized Pt/TiO2 was more active for oxygen reduction and combined oxygen reduction and hydrogen reactions in comparison to the in-situ Pt/TiO2 samples, due to better availability of Pt within a core/shell structure for the reactions.

Fireworks: How to Simulate the Manufacture and Operation in the Atmosphere with the Substitution of Ultrasonic Spray Pyrolysis

2018 ◽  
Vol 15 (2) ◽  
pp. 147-156
Author(s):  
Rebeka Rudolf ◽  
Urban Ferčec ◽  
Mohammed Shariq
Keyword(s):  
Spray Pyrolysis ◽  
Final Section ◽  
Web Of Science ◽  
Raw Materials ◽  
Ultrasonic Spray Pyrolysis ◽  
Physiochemical Properties ◽  
Physical Size ◽  
Respiratory Problems ◽  
Ultrasonic Spray ◽  
Temperature Ranges

Background: This review provides a closer look at recent work in the field of fireworks manufacture, which could see the replacement of micron-sized particles with their nano-scaled counterparts. Moreover, we also discuss micron-sized particles as well as nanoparticles (NPs) from K, Fe, Al, Ti, Ba, etc., that are produced in the atmosphere as a result of these fireworks. One of the possible technological substitutes for fireworks is presented in detail, i.e., the use of ultrasonic spray pyrolysis (USP) technology. Method: We searched Google, Web of Science and PubMed for a literature survey of fireworks and their products: firecrackers, micron-sized and nanoparticles. Moreover, we used some of our own knowledge and experimental data to strengthen the possibility of simulating the synthesis of firework products on the laboratory scale. Results: The use of nano reactants and oxidisers has seen a substantial increase in the sound efficiency and a decrease in the amount of chemicals used, making fireworks more eco-friendly. The application of Al- and Ti-based nano flash powder in the size range from 35 nm to 50 μm resulted in a significant improvement in the ignition properties of the fireworks. Under changing aerodynamic conditions, it is difficult to collect them as samples for real-time monitoring, needed for their characterization or the testing of their harmfulness under laboratory conditions. As a result, NPs below 100 nm in the surroundings could be easily inhaled into the lungs and cause more pulmonary and respiratory problems than micron-sized particles. USP produces nanoparticles in the laboratory that could replace the conventional micron-sized firecracker raw materials, or nanoparticles that are similar to those formed by fireworks. It will also help to identify the physiochemical properties of the airborne particulates in order to understand and evaluate their impact. </P><P> This review could be valuable for a controlled economic synthesis through USP, and in the use of nanopowders in pyrotechnology that could reduce pollution to a great extent, thus contributing to the growth and good practise of the fireworks industry. With respect to the USP synthesis, we have also discussed in detail the physical (size, shape) and chemical (composition) characteristics of Al2O3 and TiO2 NPs from different precursors and their temperature ranges. An in-depth explanation for a comparative analysis for the formation mechanism of nanoparticles through both fireworks and USP is presented in the final section. We can produce nanoparticles in the laboratory with ultrasonic spray pyrolysis that have similar properties to those produced from fireworks and can then be used for further testing.

Sign in / Sign up

Export Citation Format

Share Document