Effect of the surface chemistry on the stability and mechanical properties of the Zirconia-Hydroxyapatite bioceramic

2021 ◽  
Vol 23 ◽  
pp. 100980
Author(s):  
M. Es-saddik ◽  
S. Laasri ◽  
M. Taha ◽  
A. Laghzizil ◽  
A. Guidara ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Surface Chemistry ◽  
The Stability

An analysis of the transport properties and mechanical stability of rapidly solidified Al-Sb alloy

2015 ◽  
Vol 10 (2) ◽  
pp. 2663-2681
Author(s):  
Rizk El- Sayed ◽  
Mustafa Kamal ◽  
Abu-Bakr El-Bediwi ◽  
Qutaiba Rasheed Solaiman
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Melt Spinning ◽  
Elastic Moduli ◽  
Mechanical Stability ◽  
Microstructural Analysis ◽  
Alloy System ◽  
Antimony Content ◽  
The Stability ◽  
Rapidly Solidified

The structure of a series of AlSb alloys prepared by melt spinning have been studied in the as melt–spun ribbons  as a function of antimony content .The stability  of these structures has  been  related to that of the transport and mechanical properties of the alloy ribbons. Microstructural analysis was performed and it was found that only Al and AlSb phases formed for different composition.  The electrical, thermal and the stability of the mechanical properties are related indirectly through the influence of the antimony content. The results are interpreted in terms of the phase change occurring to alloy system. Electrical resistivity, thermal conductivity, elastic moduli and the values of microhardness are found to be more sensitive than the internal friction to the phase changes. 

scholarly journals Controlling surface chemistry and mechanical properties of metal ionogels through Lewis acidity and basicity

2021 ◽  
Vol 9 (8) ◽  
pp. 4679-4686
Author(s):  
Coby J. Clarke ◽  
Richard P. Matthews ◽  
Alex P. S. Brogan ◽  
Jason P. Hallett
Keyword(s):  
Mechanical Properties ◽  
Ionic Liquids ◽  
Ethylene Glycol ◽  
Surface Chemistry ◽  
Lewis Acidity ◽  
Metal Species ◽  
Poly Ethylene Glycol ◽  
Acidity And Basicity ◽  
Poly Ethylene

Gels prepared from metal containing ionic liquids with cross-linked poly(ethylene glycol) have surface compositions and mechanical properties that can be controlled by Lewis basicity and acidity of the metal species.

scholarly journals Studies on the Volumetric Stability and Mechanical Properties of Cement-Fly-Ash-Stabilized Steel Slag

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 495
Author(s):  
Mingkai Zhou ◽  
Xu Cheng ◽  
Xiao Chen
Keyword(s):  
Mechanical Properties ◽  
Fly Ash ◽  
Steel Slag ◽  
Critical Issue ◽  
Expansion Behavior ◽  
Strength Tests ◽  
Road Materials ◽  
Base Course ◽  
The Stability ◽  
Aggregate Base

The stability of steel-slag road materials remains a critical issue in their utilization as an aggregate base course. In this pursuit, the present study was envisaged to investigate the effects of fly ash on the mechanical properties and expansion behavior of cement-fly-ash-stabilized steel slag. Strength tests and expansion tests of the cement-fly-ash-stabilized steel slag with varying additions of fly ash were carried out. The results indicate that the cement-fly-ash-stabilized steel slag exhibited good mechanical properties. The expansion rate and the number of bulges of the stabilized material reduced with an increase in the addition. When the addition of fly ash was 30–60%, the stabilized material was not damaged due to expansion. Furthermore, the results of X-CT, XRD and SEM-EDS show that fly ash reacted with the expansive component of the steel slag. In addition, the macro structure of the stabilized material was found to be changed by an increase in the concentration of the fly ash, in order to improve the volumetric stability. Our study shows that the cement-fly-ash-stabilized steel slag exhibits good mechanical properties and volumetric stability with reasonable additions of fly ash.

scholarly journals Effect of Photoinitiator on Precursory Stability and Curing Depth of Thiol-Ene Clickable Gelatin

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1877
Author(s):  
Kai-Hung Yang ◽  
Gabriella Lindberg ◽  
Bram Soliman ◽  
Khoon Lim ◽  
Tim Woodfield ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Visible Light ◽  
Rheological Properties ◽  
Swelling Ratio ◽  
Sodium Persulfate ◽  
Photo Polymerization ◽  
Gelation Kinetics ◽  
The Stability ◽  
Over Time

Recent advances highlight the potential of photopolymerizable allylated gelatin (GelAGE) as a versatile hydrogel with highly tailorable properties. It is, however, unknown how different photoinitiating system affects the stability, gelation kinetics and curing depth of GelAGE. In this study, sol fraction, mass swelling ratio, mechanical properties, rheological properties, and curing depth were evaluated as a function of time with three photo-initiating systems: Irgacure 2959 (Ig2959; 320–500 nm), lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP; 320–500 nm), and ruthenium/sodium persulfate (Ru/SPS; 400–500 nm). Results demonstrated that GelAGE precursory solutions mixed with either Ig2959 or LAP remained stable over time while the Ru/SPS system enabled the onset of controllable redox polymerization without irradiation during pre-incubation. Photo-polymerization using the Ru/SPS system was significantly faster (<5 s) compared to both Ig2959 (70 s) and LAP (50 s). Plus, The Ru/SPS system was capable of polymerizing a thick construct (8.88 ± 0.94 mm), while Ig2959 (1.62 ± 0.49 mm) initiated hydrogels displayed poor penetration depth with LAP (7.38 ± 2.13 mm) in between. These results thus support the use of the visible light based Ru/SPS photo-initiator for constructs requiring rapid gelation and a good curing depth while Ig2959 or LAP can be applied for photo-polymerization of GelAGE materials requiring long-term incubation prior to application if UV is not a concern.

Role of graphene oxide surface chemistry on the improvement of the interlaminar mechanical properties of resin infusion processed epoxy-carbon fiber composites

2017 ◽  
Vol 39 (S4) ◽  
pp. E2116-E2124 ◽  
Author(s):  
Gloria Ramos-Fernandez ◽  
María Muñoz ◽  
Juan C. García-Quesada ◽  
Iluminada Rodriguez-Pastor ◽  
Ignacio Martin-Gullon
Keyword(s):  
Mechanical Properties ◽  
Graphene Oxide ◽  
Carbon Fiber ◽  
Surface Chemistry ◽  
Fiber Composites ◽  
Oxide Surface ◽  
Carbon Fiber Composites ◽  
Resin Infusion

Durability of BFRP and Hybrid FRP Sheets under Freeze-Thaw Cycling

2010 ◽  
Vol 163-167 ◽  
pp. 3297-3300 ◽  
Author(s):  
Jia Wei Shi ◽  
Hong Zhu ◽  
Zhi Shen Wu ◽  
Gang Wu
Keyword(s):  
Mechanical Properties ◽  
Test Data ◽  
Mechanical Characteristics ◽  
Test Results ◽  
Freeze Thaw ◽  
Frp Composites ◽  
Test Parameters ◽  
The Stability ◽  
Better Than

Coupon tests were conducted to investigate the mechanical characteristics of basalt FRP (BFRP) sheet, basalt-carbon hybrid FRP sheets and the corresponding epoxy rein under the effect of freeze-thaw cycling. FRP sheets and epoxy rein coupons were subjected to up to 200 and 250 freeze-thaw cycles respectively. Test parameters included the number of freeze-thaw cycles and the types of FRP composites. Test results show that (1) BFRP sheet perform better than CFRP or GFRP sheets under high freeze-thaw cycles; (2) exposed hybrid FRP sheets not only show very little loss in mechanical properties, but also contribute to the stability of test data; (3) mechanical properties of rein epoxy decrease significantly with increasing freeze-thaw cycles.

Sign in / Sign up

Export Citation Format

Share Document