Contact underwater explosion response of metallic sandwich panels with different face-sheet configurations and core materials

2020 ◽  
Vol 157 ◽  
pp. 107126 ◽  
Author(s):  
Ganchao Chen ◽  
Yuansheng Cheng ◽  
Pan Zhang ◽  
Jun Liu ◽  
Changhai Chen ◽  
...  
Keyword(s):  
Sandwich Panels ◽  
Underwater Explosion ◽  
Face Sheet ◽  
Core Materials

Dynamic Response of Sandwich Panels With Functionally Graded Aluminum Foam Cores Subjected to Underwater Explosion

2016 ◽  
Author(s):  
Changzai Zhang ◽  
Pan Zhang ◽  
Jun Liu ◽  
Jianqiang Pan ◽  
Yanjie Zhao ◽  
...  
Keyword(s):  
Dynamic Response ◽  
Energy Absorption ◽  
High Efficiency ◽  
Sandwich Panels ◽  
Underwater Explosion ◽  
Functionally Graded ◽  
Face Sheet ◽  
Permanent Displacement ◽  
Bottom Face ◽  
Stretching Deformation

Numerical investigations were conducted using the MSC.Dytran software on the dynamic response of functionally graded sandwich panels when subjected to underwater explosion. The effects of the number of layers and density distribution of graded cores on the blast performance were analyzed in several aspects under the constraint of equivalent mass. The simulation results have demonstrated that sandwich panels experience both bending and large plastic stretching deformation. Compared to single layered sandwich panel, those panels with graded cores overall possess smaller central permanent displacement and better energy absorption capability. Central deflection of bottom face sheet decreases as the density of cores descends from top to bottom face. A large proportion of the energy dissipates in the plastic deformation of top face sheet by the end of response, followed by the bottom face sheet, and core compression absorbers the minimum. Utilizing the high efficiency of energy absorption by adjusting those cores with greater density near to the top face sheet can further mitigate the damage from explosion.

scholarly journals Bending Response of 3D-Printed Titanium Alloy Sandwich Panels with Corrugated Channel Cores

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 556
Author(s):  
Zhenyu Zhao ◽  
Jianwei Ren ◽  
Shaofeng Du ◽  
Xin Wang ◽  
Zihan Wei ◽  
...  
Keyword(s):  
Titanium Alloy ◽  
Heat Dissipation ◽  
Sandwich Panels ◽  
Face Sheet ◽  
Collapse Mechanism ◽  
Corrugated Channel ◽  
Four Point Bending ◽  
Numerical Predictions ◽  
Load Carrying ◽  
3D Printed

Ultralight sandwich constructions with corrugated channel cores (i.e., periodic fluid-through wavy passages) are envisioned to possess multifunctional attributes: simultaneous load-carrying and heat dissipation via active cooling. Titanium alloy (Ti-6Al-4V) corrugated-channel-cored sandwich panels (3CSPs) with thin face sheets and core webs were fabricated via the technique of selective laser melting (SLM) for enhanced shear resistance relative to other fabrication processes such as vacuum brazing. Four-point bending responses of as-fabricated 3CSP specimens, including bending resistance and initial collapse modes, were experimentally measured. The bending characteristics of the 3CSP structure were further explored using a combined approach of analytical modeling and numerical simulation based on the method of finite elements (FE). Both the analytical and numerical predictions were validated against experimental measurements. Collapse mechanism maps of the 3CSP structure were subsequently constructed using the analytical model, with four collapse modes considered (face-sheet yielding, face-sheet buckling, core yielding, and core buckling), which were used to evaluate how its structural geometry affects its collapse initiation mode.

Impact Analysis of Honeycomb Core Sandwich Panels

2020 ◽  
Author(s):  
Shah Alam ◽  
Damodar Khanal
Keyword(s):  
Sandwich Panels ◽  
Sheet Thickness ◽  
Composite Panel ◽  
Face Sheet ◽  
Impact Behavior ◽  
Front Face ◽  
Geometrical Parameters ◽  
Honeycomb Core ◽  
Back Face ◽  
The Impact

Abstract The goal of this paper is to analyze the impact behavior among geometrically different sandwich panels shown upon impact velocities. Initially, composite model with aluminum honeycomb core and Kevlar (K29) face sheets is developed in ABAQUS/Explicit and different impact velocities are applied. Keeping other parameters constant, model is simulated with T800S/epoxy face sheets. Residual velocities, energy absorption (%), and maximum deformation depth is calculated for sandwich panel for both models at five different velocities by executing finite element analysis. Once the better material is found for face sheets, process is extended by varying the ratio of front face sheet thickness to back face sheet thickness keeping other geometrical parameters constant to find the better geometry. Also, comparison of impact responses of sandwich composite panel on different ratio of front face sheet thickness to back face sheet thickness is done and validated with other results available in literature.

scholarly journals Fibers Networks as a New Type of Core Material. Processing and Mechanical Properties

2009 ◽  
Vol 1188 ◽  
Author(s):  
Laurent Mezeix ◽  
Christophe Bouvet ◽  
Serge Crézé ◽  
Dominique Poquillon
Keyword(s):  
Epoxy Resin ◽  
Carbon Fibers ◽  
Sandwich Panels ◽  
Open Architecture ◽  
Core Material ◽  
Cross Linking ◽  
Damping Capacity ◽  
The Core ◽  
Water Accumulation ◽  
Core Materials

AbstractMany different sandwich panels are used for aeronautical applications. Open and closed cell structured foam, balsa wood or honeycomb are often used as core materials. When the core material contains closed cells, water accumulation into the cell has to be taken into account. This phenomenon occurs when in service conditions lead to operate in humidity atmosphere. Then, water vapor from air naturally condenses on cold surfaces when the sandwich panel temperature decreases. This water accumulation might increase significantly the weight of the core material. Core with a ventilated structure helps to prevent this phenomenon. Periodic cellular metal (PCM) has been motivated by potential multifunctional applications that exploit their open architecture as well as their apparent superior strength and stiffness: pyramidal, lattice, Kagome truss or woven. One of the drawbacks of these materials is the expensive cost of the manufacturing. Recently, a novel type of sandwich has been developed with bonded metallic fibers as core material. This material presents attractive combination of properties like high specific stiffness, good damping capacity and energy absorption. Metal fibers bonded with a polymeric adhesive or fabricated in a mat-like form consolidated by solid state sintering. Entangled cross-linked carbon fibers have been also studied for using as core material by Laurent Mezeix. In the present study, ventilated core materials are elaborated from networks fibers. The simplicity of elaboration is one of the main advantages of this material. Multifunctional properties are given by mixing different sorts of fibers, by example adding fibers with good electrical conduction to give electrical conductivity properties. In this study network fibers as core material are elaborated using carbon fibers, glass fibers and stainless steel fibers. In aeronautical skins of sandwich panels used are often carbon/epoxy prepreg, so epoxy resin was used to cross-link fibers. The core thickness was chosen at 30 mm and fibers length was chosen at 40 mm. Entanglement, separation of filaments and cross-linking are obtained in a specific blower room. Fibers are introduced in the blower room, compressed air is applied and in same time epoxy resin is sprayed. Indeed one of the sandwich core material properties required is low density, so yarns size need to be decreased by separating filaments. Network fibers are introduced in a specific mould and then are compressed. The density obtained before epoxy spaying is 150 kg/m3. Finally samples are polymerized at 80°C for 2 hours in a furnace under laboratory air. Compressive behavior is study to determinate the influence of fibers natures and the effect of cross-linking. Reproducibility is also checked.

Ballistic impact behaviors of aluminum alloy sandwich panels with honeycomb cores: An experimental study

2016 ◽  
Vol 20 (7) ◽  
pp. 861-884 ◽  
Author(s):  
QN Zhang ◽  
XW Zhang ◽  
GX Lu ◽  
D Ruan
Keyword(s):  
Aluminum Alloy ◽  
Energy Absorption ◽  
Impact Velocity ◽  
Sandwich Panels ◽  
Sheet Thickness ◽  
Face Sheet ◽  
Ballistic Limit ◽  
Core Density ◽  
Impact Tests ◽  
Honeycomb Cores

To study the protection property of aluminum alloy sandwich panels with honeycomb cores under the attack of bullets or debris, quasi-static perforation, and ballistic impact tests were conducted, in which the thicknesses of the face sheet and core were 0.5–2.0 and 12.7 mm, respectively, while projectiles with diameter 7.5 mm and impact velocity 50–220 m/s were employed. Based on the experiments, the influences of impact velocity, face sheet thickness, core density as well as the nose shape of the projectiles were investigated. The results showed that in the impact tests, the sandwich panels dissipated much more energy than those in quasi-static perforation tests, and the energy absorption and ballistic limit of the sandwich panels increased with the increase of impact velocity. The influence of face sheet thickness was more remarkable than the core density, which was due to the relative density of honeycomb is too small. Although the increase of core density could induce the increase of energy absorption, this effect is more effective for thinner face sheet. Moreover, under the same impact velocity about 200 m/s and face sheet thickness 1.0 mm, the ballistic limit for conical-nosed projectile is highest, while it is lowest for flat-nosed projectile.

Eddy Current Array Inspection of Damaged CFRP Sandwich Panels

2020 ◽  
Vol 3 (3) ◽  
Author(s):  
P. R. Underhill ◽  
T. Rellinger ◽  
T. W. Krause ◽  
D. Wowk
Keyword(s):  
Carbon Fiber ◽  
Eddy Current ◽  
Sandwich Panels ◽  
Fiber Reinforced Polymer ◽  
Face Sheet ◽  
Carbon Fiber Reinforced Polymer ◽  
The Core ◽  
Reinforced Polymer ◽  
Different Types ◽  
Phase Map

Abstract The use of eddy current (EC) arrays to detect damage in sandwich panels, such as disbonding of the carbon fiber reinforced polymer (CFRP) face-sheet to the core, is investigated. It is shown that the array is very sensitive to slight core crush and can readily find small dents and disbonds. At the same time, the eddy current array can look much deeper into the honeycomb to detect defects such as tears. The phase map of the EC signal can be used in some cases to distinguish between different types of damage. EC arrays offer the ability to rapidly scan large areas of CFRP panels.

Sign in / Sign up

Export Citation Format

Share Document